'"erl.exe"' is not recognized as an internal or external command,
operable program or batch file.
Elixir and Erlang were running fine until today when I did a version update. I don't really have access to a good version manager for Elixir since I use a windows computer so I just ran the Elixir install wizard to uninstall and reinstall to update the version. I have uninstalled and reinstalled a couple of times as well as checked the elixir forum for solutions (there was 1 solution, it didn't work) for solutions. I need to get Elixir up and working pretty quickly as I am about to start on my first contract.
Instead of using
erl <'command details'>
Try to run using "./" prefix so it become
./erl <'command details'>
in the cli.
I am also using windows and have added elixir, erlang and erts paths in env. But still, it is giving me the same error. I am not getting the error. I did not update the version. My system was slow hence I deleted some files, but they were explicit. They didn't have anything to do with the elixir folder.
Has anyone got dxgettext running under Windows 10?
I installed dxgettext from the offical homepage under Windows 10, which worked fine.
But whenever I try to run some of the installed tools (e.g. msgfmt.exe), they don't really run, but call themselves again, generating thousands of processes and making the system crawl.
This is what happens:
I call msgfmt --help
the executable msgfmt hangs, blocking the command window
in the TaskManager I see houndreds of msgfmt.exe processes popping up
I think, I have to replace the gettext tools of the dxgettext package with some newer version but before trying to figure it out I first wanted to ask if someone else experienced similar problems and found a working solution.
My questions:
Has anyone got the tools coming with dxgettext running under Windows 10?
What steps have been necessary to get it to run?
I resolved the problem in the following way:
I downloaded https://github.com/mlocati/gettext-iconv-windows/releases/download/v0.19.8.1-v1.14/gettext0.19.8.1-iconv1.14-static-32.zip from https://mlocati.github.io/articles/gettext-iconv-windows.html
I replaced the following files from the installation directory of dxgettext with files from the zip archive:
msgattrib.exe
msgcat.exe
msgcmp.exe
msgcomm.exe
msgconv.exe
msgen.exe
msgexec.exe
msgfilter.exe
msgfmt.exe
msggrep.exe
msginit.exe
msgmerge.exe
msgunfmt.exe
msguniq.exe
xgettext.exe
Result:
Dxgettext and the tools, I use, seem to work fine. I found no problems with my workflow so far, with one exception:
If I use assemble to embed mo-files into an exe compiled with JvGnugettext.pas, I get the following error:
Pach code “6637DB2E-62E1-4A60-AC19-C23867046A89” was not found in .exe file. Are you sure the .exe file has been compiled with the correct libraries?
This may not be related to the original problem. However, it is resolved by replacing the original assemble.exe with the version from https://sourceforge.net/p/dzlib/code/HEAD/tree/buildtools/trunk/ (see answer by #dummzeuch).
The installer on the official home page is pretty old. Last time I looked it contained several outdated dlls and executables from the original gnugettext project that did not work correctly under recent Windows versions. You could take those from my buildtools repository on OSDN. These work for me. No guarantee that they work for you though.
https://osdn.net/projects/dzlib-tools/scm/svn/tree/head/buildtools/trunk/
I've been having these issues too with dxgettext 1.22, in Windows 10 1607. I changed some DLLs at first but kept having the bash.exe looping and hogging my PC to death.
So what I did was basically install latest Cygwin 32bit and replaced the appropiate DLLs. I kept the ones for gettext. Instructions:
Download and fresh install dxgettext-1.2.2.exe from http://dxgettext.po.dk/download as admin. Restart.
Download Cygwin 32bit from https://cygwin.com/install.html in a different folder from dxgettext (I took the default, c:\cygwin)
Run setup-x86.exe and select "Base" Package (Install). Next, Select Required packages just in case.
Move the following files from dxgettext folder to a backup folder (we'll use some DLL later):
cyg*.dll
bash.exe
Copy from c:\cygwin to the dxgettext folder the following files:
bash.exe (set to run as admin)
cygwin1.dll
cygiconv-2.dll
cygintl-8.dll
cygreadline7.dll
cyggcc_s-1.dll
cygncursesw-10.dll
Recover the file(s) below from the backup folder (See #4) and copy to the dxgettext folder.
cyggettextsrc-0-14-1.dll
cyggettextlib-0-14-1.dll
cygintl-3.dll
Running like this, you might get error 740 (requires elevation). So: Set ggmerge.exe,ggfmt.exe to run as admin
** EDIT** Found online this very interesting link, from a programmer who offers a free backup written in Delphi. The good thing is he adapted the dxgettext tools to run in Windows 10. This helped me a lot.
http://personal-backup.rathlev-home.de/translate.html
I am starting out Erlang in Win 7 64 bit box and I was able to use Erlang IDE just fine and since I am used to Eclipse I wanted to use Erlide with Eclipse. I am following running project document on erlide I was able to follow along. (Except step 41, Where it is talking about adding something to 'Main tab' and in my case it shows as 'Erlang', but options they are same) When I run the 'new configuration' on the HelloWorld example it runs and stuck at 57%.
I did install Erlang on my PC and installed it in a directory without space and it does shows up on my installed runtime in Eclipse.
When I run I do not see 'Eclipse IDE' like I saw when I was running Scala IDE in eclipse.
I did enter a dummy cookie name just in case if that is the problem
I tried running 'erl -name foo' to make sure node is able to run and it did.
Is there anything I need to check?
Thanks
Try first this:
* delete the configuration you created
* open a file in your project, right-click in it and choose Run as -> Erlang application
This will create a configuration that should work. You should see a console opening, where you can interact with the Erlang node.
If that is not happening, please go to window->preferences->erlang->report problem and create a report. Attach it to an issue at https://github.com/erlide/erlide/issues or send it to erlide_bugs#lists.sourceforge.net
I have the same problem on Win 7 - 64bit.
Problem: After some very first times build and run successfully, then eclipse couldnt run anymore. Restart Eclipse won't help.
Solution: Restarting the computer, and plz remember to Build Project before running it.
I keep getting the same type of error messages and I have really done all I can to get rid of them. The message is as follows, only the module can vary at times:
ruby 5740 child_info_fork::abort: address space needed by 'date_core.so' (0x600000) is already occupied
These messages occur at various times when trying to run Rails, such as “rails console”.
I am running the following environment:
Windows 7 Ultimate 64-bit
Cygwin Net using setup 2.774 (installed from Internet mirrors)
Ruby 1.9.3p392
Rails 3.2.11
I have taken the following steps attempting to fix this:
Deleted all BLODA and restarted, including Norton 360 and Malwarebytes. (BLODA is Big List of Dodgy Apps.)
Deleted and reinstalled Cygwin.
Executed “rvm implode” and rebuilt the RVM and Ruby on Rails environment.
Used CMD & ASH to run “peflagsall” & “rebaseall”. Ran “rubyrebase”. Restarted.
Used FIND to build a file of all *.so & *.dll files. Ran “rebase -T”. Restarted. This has also been done using the “-b 0x77000000” switch.
Used same file to create “to_peflags” script issuing peflags against each individual file. Restarted.
All repair attempts have been futile. At times, “rebase -si |grep ‘*’” would be clean. Any attempt to run “rails console” or similar commands results in Address Space Occupied messages. Subsequent “rebase -si” would then again show conflicts.
I have been trying to run “peflags” against the Ruby modules, but I only get “skipped because could not open” error messages there. File permissions and ACL both show correct permissions. The same error occurs whether or not Administrator is used.
This is pretty frustrating. I would like to fix my current environment, but I am considering moving to MSYS or SFU, but I don’t know if either of those are decent options. I am also considering going native UNIX, but I’ll leap off the cliff when I get to it.
For now, does anyone have a fix for this specific error for me? Thanks…
I have used procexp to monitor "rails console" execution. Bash is calling cmd.exe to run the rails.bat file. Cmd.exe runs in ASLR mode. Used Microsoft EMET 3.0 to turn off mandatory ASLR and bottom up ASLR for both bash and cmd. Cmd.exe still runs in ASLR mode. It must be compiled that way.
Updated registry to set HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\MoveImages to 0, -1 then 1. 0 caused system problems. -1 had no effect. 1, which was supposed to be the default, helped somewhat as long as EMET changes were in place. But, it was unreliable as Address Space Occupied would eventually recur.
Decided to attempt to install a command processor that either didn’t require ASLR or allowed me to disable it using PE flags. I installed TCC/LE and attempted to get Cygwin Bash to use it to process .bat files. I tried using the path variable, the COMSPEC variable and changes to batfile and cmdfile in the registry all to no effect. Cygwin Bash must either have it hard coded or some nonobvious control.
My fix is to replace my environment. I know I will eventually migrate to some Unix, but for now I am converting to MinGW/MSYS and RubyStack. All I want to do is to get a stable RoR (Ruby on Rails) environment running for today. I don’t see that happening using Cygwin with Windows 7 Ultimate. I keep running into too many problems and this one is a very, very tough nut to crack. Thanks…
I'm ask/answering this question because it hung me up & it's likely someone else will have the same problem.
Install of RabbitMQ x64 v2.8.6 on Windows Server 2008 x64.
After Erlang install using default install location to C:\Program Files\erl5.9.2, I'm attempting to start the server via running the rabbitmq-service.bat. Fail:
Please either set ERLANG_HOME to point to your Erlang installation
or place the RabbitMQ server distribution in the Erlang lib folder.
Problem is the .bat file does not have the correct subpath. with 5.9.2 (R15B02) version of erlang. My ERLANG_HOME directory is set correctly, but the script does not use it correctly for this version of Erlang, which, it appears to this Erlang noob to have a new subdirectory called "erts-5.9.2" which is causing the problems. Maybe someone intimate with these scripts can describe how to make this work correctly without the hack workaround I'm about to describe?
1- Set environment variable:
Variable name : ERLANG_HOME
Variable value: C:\Program Files (x86)\erl6.4
note: don't include bin on above step.
2- Add %ERLANG_HOME%\bin to the PATH environmental variable:
Variable name : PATH
Variable value: %ERLANG_HOME%\bin
This works well.
There are several RabbitMQ control .bat files on windows. Every one you use needs to get changed to reflect the Erlang path correctly. In this example, I'm editing the rabbitmq-server.bat because it's one of the easier ones... any of the .bat files you want to run will need this hack to get them to work, with the rabbitmq_service.bat file being the most involved to adjust.
editing that rabbitmq_server.bat file, you can see on about line 48 or so there's a check to see if the erl.exe is found, but the path isn't correct:
if not exist "!ERLANG_HOME!\bin\erl.exe" (
that path does not match the file structure for the 5.9.2 version of Erlang. I fixed this by simply removing this path check from about line 48 to 58, then, where the .bat actually makes a call to the erl.exe on about line 129 which reads:
"!ERLANG_HOME!\bin\erl.exe"
I simply hardcoded the path to my erl.exe:
"C:\Program Files\erl5.9.2\erts-5.9.2\bin\erl.exe"
With the pathing correct, the rabbitmq .bat files will run.
I had the similar issue, modifying ERLANG_HOME in .bat files did not work. Then I tried echo %ERLANG_HOME% in command prompt, that did not print the environment variable value(I could see that ERLANG_HOME environment variable has been created under advance system settings), that lead me to believe that I need to restart server for 64 bit installation of Erlang. After rebooting server, It worked like a charm. I hope this helps someone.
Just to share an up-to-date answer as of 2019: On Windows Server 2019, after setting up the environment variable, a restart is required to solve the problem.
I got into same kind of problem.
I solved it by doing three changes as given below.
Update Path variable "ERLANG_HOME" : "C:\Program Files\erl8.0" in Environment Variables.
Upadte "Path" variable "Path" : ";%ERLANG_HOME%\bin;"
Give urself FULL CONTROL permissions over "Program Files" in C drive.
It worked for me in this way.
This problem still occurs in Erlang 18.3 (erl7.3) and RabbitMQ 3.6.9 on Windows when upgrading from any older version of RabbitMQ to version 3.6.9. The solution as already stated here is to manually set ERLANG_HOME with 'setx -m ERLANG_HOME "C:\Program Files\erl7.3"' before starting the service.
What happens is that the RabbitMQ 3.6.9 installer removes the environment variable ERLANG_HOME from the system while removing the older version of RabbitMQ. Then, when it proceeds to the installation step, it does not put back the ERLANG_HOME variable. Then, the batch files that start up RabbitMQ cannot find Erlang. They try to find Erlang's home directory using "where.exe" but it always fails after an upgrade.
RabbitMQ's installer also does not kill all of the Erlang background processes, causing many of its files to be undeletable due to the Windows "file in use" problem. This leaves behind "files in use" in %APPDATA%\RabbitMQ and "C:\Program Files\RabbitMQ." These processes are "erl.exe," "erlsrv.exe," and "epmd.exe." The RabbitMQ installer should taskkill these processes after shutting down the RabbitMQ Windows service.
RabbitMQ is rather clunky on Windows.
Download Erlang or OTP - Only one Version of OTP should be installed
Download RabbitMQ installer
Install both exe file as Administrator
Set class path for Erlang. (Setting classpath is a bit troublesome, so follow these steps)
Set a new path with name ERLANG_HOME and value C:\Program Files\erl-23.1 (do not copy bin folder here)
Edit System "path" and add %ERLANG_HOME%\bin
Go to Start - Open rabbitmq command promt and run
rabbitmq-plugins enable rabbitmq_management
Navigate to localhost:15672
Use guest/guest to login
Interesting that this worked for you. There is record of a two bugs in Erl5.9.2 that cause an incomplete installation where %ERLANG_HOME%\bin is not installed.
Either of
* Installed 64bit erlang on 32bit machine
* "The program can't start because MSVCR100.dll is missing from your computer."
https://groups.google.com/d/topic/erlang-programming/wGtFLzapiQ0/discussion
Try 5.9.1 or any other version. They also mention making the future versions of the installer alert you if it fails.
I just had the same problem mentioned here. I installed otp_win64_R15B02 on a Windows 7 machine and everything worked perfectly, but I used the same installer on a Windows 2008 server and the bin directory was not created. I then uninstalled otp_win64_R15B02 and downloaded the otp_win64_R15B02_with_MSVCR100_installer_fix and the bin directory was created.
I suspect the reason it worked on my Windows 7 system is that I have Visual Studio installed and the required libraries were already available which allowed the otp_win64_R15B02 installer to work correctly.
Oh, and if you're installing Erlang to run RabbitMQ the RabbitMQ install will succeed with the broken installer but installing otp_win64_R15B02_with_MSVCR100_installer_fix after RabbitMQ will not work, just un-install and re-install RabbitMQ to resolve this.
Just give C:\Program Files\erl10.6\ not C:\Program Files\erl10.6\bin\erl.exe in the environment variable. If you open the server.bat file I came to know the issueenter image description here
I think this is encoding issue on windows.I see a correct value but I write echo %ERLANG_HOME% on console the value come with question mark. These steps fix it.
1.go environment variable window
2.edit ERLANG_HOME item
3.copy the value, open notepad and paste there
4.copy again on notepad and paste to edit window
5.apply and exit window
6.close command line tools and reopen
7.run rabbitmq bat file.
I solved it in a quick and dirty way,without naming path variables
I've opened the bat file and replaced every occurrence of
!ERLANG_HOME!\bin\erl.exe
with hard coded path for example might be diffrent path for you because of diffrent version
C:\Program Files\erl10.3\erts-10.3\bin\erl.exe
and replaced
%RABBITMQ_HOME%\escript\rabbitmq-plugins
with
C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.14\escript\rabbitmq-plugins
Even I was this problem. The issue was the environment variable ERLANG_HOME=c:\Program Files\erl9.0 which was never existed.
I cross checked the path. The correct path was c:\Program Files\erl9.3.
After correcting the
ERLANG_HOME=c:\Program Files\erl9.3
the problem solved. So, definitely it is a path issue.
In my case, it should be installed erlang using admin role running
If above solutions doesn't work for you then you can try following
Find another compatible version of erlang for your rabbit mq e.g. for rabbit 3.7.x erlang version 20.3.x to 22.0.x all are compatible .
Right click newly downloaded erlang version and from properties select the option to unblock the file .
Run the erlang with admin persssion .
Re run rabbit mq exe