I have a very simple report constructed using Report Builder 2.0 talking to analysis services for TFS 2010. The report shows the number of active bugs logged against a particular Team Project, sorted by priority.
I have several team projects, and I don't want to duplicate the same report for each one. Instead, I would like to pass in the team project as a parameter in the URL. A search of the web shows good guidance from John Socha-Leialoha on how to do this (finding the MDX parameter and constructing the query).
I have set a default on the report to point to a particular team project and the report presents the expected information, when I add a parameter to the URL the report fails to run, and displays the following message: 'Value cannot be null. Parameter name: main'
The following URL displays the report correctly with the default team project:
/sites/tfsserver/_layouts/TfsRedirect.aspx?tf:Type=Report&tf:ReportName=Bug+Information/ActiveBugsByPriorityBarChart
I've also tried appending the parameter, as follows:
/sites/tfsserver/_layouts/TfsRedirect.aspx?tf:Type=Report&tf:ReportName=Bug+Information/ActiveBugsByPriorityBarChart&tf:Parameters=TeamProjectTeamProjectHierarchy=[Team Project].[Team Project Hierarchy].&[{E207FAFF-CA70-41A2-8A62-B881C9C9F8F1}]
This, also, generates the message: 'Value cannot be null. Parameter name: main'
This led me to the realization that I needed to escape the & symbol, as follows:
/sites/tfsserver/_layouts/TfsRedirect.aspx?tf:Type=Report&tf:ReportName=Bug+Information/ActiveBugsByPriorityBarChart&tf:Parameters=TeamProjectTeamProjectHierarchy=[Team Project].[Team Project Hierarchy].&26[{E207FAFF-CA70-41A2-8A62-B881C9C9F8F1}]
However, the report still fails to run, and displays the same error message.
Since it is not referenced in Socha's example, I have also tried running the report while omitting the &tf: parameters tag, as follows:
/sites/tfsserver/_layouts/TfsRedirect.aspx?tf:Type=Report&tf:ReportName=Bug+Information/ActiveBugsByPriorityBarChart&TeamProjectTeamProjectHierarchy=[Team Project].[Team Project Hierarchy].&26[{E207FAFF-CA70-41A2-8A62-B881C9C9F8F1}]
This doesn't seem to work either. At this point, I'm happy for any advice/guidance I can get.
Maybe this blog post helps you: http://ewaldhofman.nl/post/2009/06/02/Add-SSRS-report-as-dashboard-to-sharepoint.aspx
Related
We've just upgraded from TFS 2015.2 to TFS 2017.3 and we're running in to an issue when creating new team projects.
For some reason, we're getting the following error in the error log when we try to create a new team project:
[09:54:24.797] Importing work item types
[09:54:25.663] [Error] TF400930: The reporting attribute for field Microsoft.VSTS.Common.StateChangeDate is inconsistent between the imported XML and what is currently configured for the field. Correct the field configuration in the XML and try again.
[09:54:25.667] Microsoft.TeamFoundation.WorkItemTracking.Server.LegacyValidationException: TF400930: The reporting attribute for field Microsoft.VSTS.Common.StateChangeDate is inconsistent between the imported XML and what is currently configured for the field. Correct the field configuration in the XML and try again.
[09:54:25.667] at Microsoft.TeamFoundation.WorkItemTracking.Server.ServerMetadataProvisioningHelper.ThrowValidationException(String message)
[09:54:25.667] at Microsoft.TeamFoundation.WorkItemTracking.Common.Provision.UpdatePackageField.CheckDefinitionConsistency(XmlElement fieldElement)
[09:54:25.667] at Microsoft.TeamFoundation.WorkItemTracking.Common.Provision.UpdatePackageField.Update(XmlElement fieldElement)
Here is the result from witadmin:
Field: Microsoft.VSTS.Common.StateChangeDate
Name: State Change Date
Type: DateTime
Use: --- (Bug, Shared Steps, Task, Test Case, User Story, Issue, Change Request)
Indexed: False
Reportable As: dimension
And from a search with Notepad++:
Notepad++ Search for Microsoft.VSTS.Common.StateChangeDate
As you can see from the search, it is being "reportable" as a dimension, which is what witadmin is saying the current attribute is.
Any idea on what we're doing wrong?
Thanks!
I checked on my side, by default the reportable attributes are not set in the Workitem definition files (.xml files).
So, please try to remove the attribute reportable = "dimension" from all the Wits. Then import the Wits and try it again.
If that still not work, you can try removing the Microsoft.VSTS.Common.StateChangeDatedefinition from these work items, it's a standard field which will be added to all your work item types automatically.
Reference this similar thread : Tfs project creation results in error: TF400930: Field 'System.ExternalLinkCount' is defined multiple times
I have recently upgraded an on-premises Team Foundation Server from Tfs 2015 to Tfs2015.Update3 (14.102.25423.0)
The upgrade was completed and all other functionality seems to work as usual.
A day or so ago I attempted to create a new Tfs project (TFVC) and that resulted in an error.
When I look at the application tier log files, I see the following:
[10:31:30.153] Executing step: Create the Team Project.
[10:31:30.167] Executing step: 'Create the Team Project.' WorkItemTracking.CreateTeamProject (4 of 13)
[10:31:30.183] Getting process template.
[10:31:31.463] Refreshing server caches.
[10:31:31.463] Importing work item link types.
[10:31:32.180] Importing work item types
[10:31:33.727] Importing work item types
[10:31:34.413] [Error] TF400930: Field 'System.ExternalLinkCount' is defined multiple times with different field definitions. Correct the field definition and try again.
[10:31:34.507] Microsoft.TeamFoundation.WorkItemTracking.Server.LegacyValidationException: TF400930: Field 'System.ExternalLinkCount' is defined multiple times with different field definitions. Correct the field definition and try again.
[10:31:34.507] at Microsoft.TeamFoundation.WorkItemTracking.Server.ProvisioningService.InternalImportWorkItemTypesOrGlobalWorkflows(IVssRequestContext requestContext, Int32 projectId, String methodologyName, IEnumerable`1 typeElements, ProvisioningActionType actionType, InternalSchemaType schemaType, Boolean overwrite, ProvisioningImportEventsCallback importEventCallback)
We are unfortunately making use of a customized template (which is based on the Scrum template) and it is exactly this template that causes the error.
When creating a new Tfs project (TFVC) based on the standard Scrum or Agile templates it works fine.
I downloaded the customized scrum template in question and did a grep search on “System.ExternalLinkCount”.
When I look at the fields they do seem to be of the same type.
Any ideas or suggestion why it is acting up in this way?
You can just remove the field definition from these work items, it's a standard field which will be added to all your work item types automatically.
I am trying to upgrade from TFS 2010 to TFS 2013.
The Update went well and the only problem I have now is when I try to Configure the web access features it gives me the following error.
[Warning] TF400609: Cannot add the action 'Microsoft.VSTS.Actions.StartWork' to the work item type 'Task' because the state 'New' does not exist.
[Warning] TF400609: Cannot add the action 'Microsoft.VSTS.Actions.StopWork' to the work item type 'Task' because the state 'New' does not exist.
[Error] TF400654: Unable to configure Planning Tools. The following element contains an error: BugWorkItems/BugWorkItems. TF400506: This element defines the states for work items that represent Bugs or Defects. Each state must exist in at least one of the work item types that are defined in: BugWorkItems. The following states do not exist in any of the work item types: Active.
[Error] TF400654: Unable to configure Planning Tools. The following element contains an error: BugWorkItems/BugWorkItems. TF400507: Each work item type must support an initial state value that matches one of the states defined in: BugWorkItems. The following work item types have initial states that do not include any states defined in the bug state configuration: Bug.
Since my previous process template was customized I know I need to do the same here and update the new process template. Since I do not have Visual Studio Professional Licence I do not have process template editor. So I went on and Changes the templates manually.
Basically in the Task items I renamed the status 'Active' to 'New' and in the Bug Item I renamed the 'Active' to 'Initiated' which was used in my project.
And I uploaded this edited template back and tried to configure the web access pages having no luck.
Any clue on where I went wrong? The error message does not change whatever the changes I make to the process template.
You need to export process configuration using witadmin exportprocessconfig.
Change the States elements to match your work items states.
Then export categories and all categories matches your workflow requirements.
I'm trying to follow the instructions for deploying a database via TFS build listed here:
http://www.mytechfinds.com/articles/software-testing/6-test-automation/64-db-deployment-tfs
The instructions include notes about how to configure a ConvertWorkspaceItem element. I've followed the directions, but TFS remains unhappy with my setting for 'Result' and 'Workspace'. For now, I simply entered the text from the directions ('dbproj' and 'Workspace', respectively). TFS complains about my values:
Compiler error(s) encountered processing expression "dbproj". 'dbproj' is not declared. It may be inaccessible due to its production level.
I'm trying to find basic tutorial information on the ConvertWorkspaceItem element, but other than the MSDN reference page there isn't a lot of info. Does anyone know much about configuring this element?
You need to specify valid variable names for both of these properties. there should already be a variable declared in the workflow called workspace, You will need to declare a variable of type string that you wish to receive the result of this activity and specify it's name as the Result property. It looks like in your linked article the author must have already created a variable called dbproj. At the bottom of the workflow designer is a variables tab where you can define your own variables.
I am trying to create a setup project for a Windows Service. I've followed the directions at http://support.microsoft.com/kb/816169 to create the setup project with no trouble.
I want to be able to get a value during the installation in order to update the app.config with the user's desired settings. I added a Textboxes (A) dialog to retrieve the values. I set the Edit1Property property to "TIMETORUN", and in my Primary Output action's CustomActionData property I put in the following: /TimeToRun="[TIMETORUN]\". So far so good. Running the setup I can retrieve the TimeToRun value from the Context.Parameters collection without issue.
In order to locate the app.config I need to also pass in the value of the TARGETDIR Windows Installer Property to my custom action. This is where things begin to fall apart. In order to achieve this, the above CustomActionData must be altered like so: /TimeToRun="[TIMETORUN]\" /TargetDir="[TARGETDIR]\". Now when I run the setup I get the following error message:
Error 1001. Exception occurred while initializing the installation.
System.IO.FileNotFoundException: Could not load file or assembly 'file:///C:\Windows\SysWOW64\Files' or one of its dependencies. The system cannot
find the file specified.
If you google this problem you will inevitably find people having tremendous success by simply adding the trailing slash to the /TargetDir="[TARGETDIR]\" portion of the CustomActionData. This unfortunately does not solve my issue.
I tried so many different variations of the CustomActionData string and none of them worked. I tried logging to a file from my overridden Install method to determine where the breakage was, but no log file is created because it's not even getting that far. As the error indicates, the failure is during the Initialization step.
I have a hunch that it could be one of the dependencies that the setup project is trying to load. Perhaps somehow something is being appended to the CustomActionData string and isn't playing well with the TARGETDIR value (which contains spaces, i.e. "C:\Program Files\My Company\Project Name"). Again, this is another hunch that I cannot seem to confirm due to my inability to debug the setup process.
One further thing to mention, and yes it's another hunch, could this be an issue with Setup Projects on 64-bit version of Windows? I'm running Windows 7 Professional.
I'll provide names of the dependencies in case it helps:
Microsoft .NET Framework
Microsoft.SqlServer.DtsMsg.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SQLServer.ManagedDTS.dll
Microsoft.SqlServer.msxml6_interop.dll
Microsoft.SqlServer.PipelineHost.dll
Microsoft.SqlServer.SqlTDiagM.dll
As you may glean from the dependencies, the Windows Service is scheduling a call to a DTSX package.
Sorry for the long rant. Thanks for any help you can provide.
The answer is so maddeningly simple. If the last argument in the CustomActionData is going to contain spaces and thus you have to surround it with quotes and a trailing slash, you must also have a space following the trailing slash, like this:
/TimeToRun="[TIMETORUN]\" /TargetDir="[TARGETDIR]\ "
The solution and explanation can be found here.
Had a similar issue. In my case, it was odd because my installer had ran successfully once, then I uninstalled my app via Add/Remove Programs successfully, did some coding (did NOT touch my CustomActionData string), and rebuilt my project and setup project. It was when I re-ran my MSI that I got this error.
The coding I had done was to bring in more values of more parameters I had been specifying in my CustomActionData string. That syntax for getting the parameter values (i.e. string filepath = Context.Paramenters["filepath"]), which was in my Installer class, was actually fine, but as I found out, the syntax of the later parameters I was now trying to get from my CustomActionData string had not been correct, from the very beginning. I had failed to add a second quote around one of those parameters, so nothing else could be obtained.
I was using the "Textboxes (A)" and "Textboxes (B)" windows in the User Interface section. A has 1 box, EDITA1, where I get the path to a file, and B has 2 boxes, EDITB1 and EDITB2, for some database parameters. My CustomActionData string looked like this:
/filepath="[EDITA1]" /host="[EDITB1] /port="[EDITB2]"
It should have been:
/filepath="[EDITA1]" /host="[EDITB1]" /port="[EDITB2]"
(closing quote on [EDITB1])