I met an error of
SWT folder '..\framework\x86_64' does not exist. Please set
ANDROID_SWT to point to the folder containing swt.jar for your
platform.
when i run the monkeyrunner in the first time.By the way, the sdk is installed with the androidStudio 3.0.
I tried to check my jdk and python, and they are ok.
To set ANDROID_SWT to point to the folder containing swt.jar for your platform, use following command:
setx -m ANDROID_SWT "C:\Users\pang\AppData\Local\Android\Sdk\tools\lib\x86_64"
Keep in mind that the path has to reflect your actual path.
Has anyone got dxgettext running under Windows 10?
I installed dxgettext from the offical homepage under Windows 10, which worked fine.
But whenever I try to run some of the installed tools (e.g. msgfmt.exe), they don't really run, but call themselves again, generating thousands of processes and making the system crawl.
This is what happens:
I call msgfmt --help
the executable msgfmt hangs, blocking the command window
in the TaskManager I see houndreds of msgfmt.exe processes popping up
I think, I have to replace the gettext tools of the dxgettext package with some newer version but before trying to figure it out I first wanted to ask if someone else experienced similar problems and found a working solution.
My questions:
Has anyone got the tools coming with dxgettext running under Windows 10?
What steps have been necessary to get it to run?
I resolved the problem in the following way:
I downloaded https://github.com/mlocati/gettext-iconv-windows/releases/download/v0.19.8.1-v1.14/gettext0.19.8.1-iconv1.14-static-32.zip from https://mlocati.github.io/articles/gettext-iconv-windows.html
I replaced the following files from the installation directory of dxgettext with files from the zip archive:
msgattrib.exe
msgcat.exe
msgcmp.exe
msgcomm.exe
msgconv.exe
msgen.exe
msgexec.exe
msgfilter.exe
msgfmt.exe
msggrep.exe
msginit.exe
msgmerge.exe
msgunfmt.exe
msguniq.exe
xgettext.exe
Result:
Dxgettext and the tools, I use, seem to work fine. I found no problems with my workflow so far, with one exception:
If I use assemble to embed mo-files into an exe compiled with JvGnugettext.pas, I get the following error:
Pach code “6637DB2E-62E1-4A60-AC19-C23867046A89” was not found in .exe file. Are you sure the .exe file has been compiled with the correct libraries?
This may not be related to the original problem. However, it is resolved by replacing the original assemble.exe with the version from https://sourceforge.net/p/dzlib/code/HEAD/tree/buildtools/trunk/ (see answer by #dummzeuch).
The installer on the official home page is pretty old. Last time I looked it contained several outdated dlls and executables from the original gnugettext project that did not work correctly under recent Windows versions. You could take those from my buildtools repository on OSDN. These work for me. No guarantee that they work for you though.
https://osdn.net/projects/dzlib-tools/scm/svn/tree/head/buildtools/trunk/
I've been having these issues too with dxgettext 1.22, in Windows 10 1607. I changed some DLLs at first but kept having the bash.exe looping and hogging my PC to death.
So what I did was basically install latest Cygwin 32bit and replaced the appropiate DLLs. I kept the ones for gettext. Instructions:
Download and fresh install dxgettext-1.2.2.exe from http://dxgettext.po.dk/download as admin. Restart.
Download Cygwin 32bit from https://cygwin.com/install.html in a different folder from dxgettext (I took the default, c:\cygwin)
Run setup-x86.exe and select "Base" Package (Install). Next, Select Required packages just in case.
Move the following files from dxgettext folder to a backup folder (we'll use some DLL later):
cyg*.dll
bash.exe
Copy from c:\cygwin to the dxgettext folder the following files:
bash.exe (set to run as admin)
cygwin1.dll
cygiconv-2.dll
cygintl-8.dll
cygreadline7.dll
cyggcc_s-1.dll
cygncursesw-10.dll
Recover the file(s) below from the backup folder (See #4) and copy to the dxgettext folder.
cyggettextsrc-0-14-1.dll
cyggettextlib-0-14-1.dll
cygintl-3.dll
Running like this, you might get error 740 (requires elevation). So: Set ggmerge.exe,ggfmt.exe to run as admin
** EDIT** Found online this very interesting link, from a programmer who offers a free backup written in Delphi. The good thing is he adapted the dxgettext tools to run in Windows 10. This helped me a lot.
http://personal-backup.rathlev-home.de/translate.html
I'm setting up my first Ruby project on Team City, which is hosted on a Windows Server, but I'm having a problem. Now, because the server may not have the required gems installed, I've added a command line build step:
bundle install
Now I thought this would be enough, but apparently bundle is not recognized as an internal or external command. Except, if I RDP into the server, if I run bundle install from anywhere, it is fine, and just notifies me that no gemfile was found.
Any ideas on if I've missed a step, or I'm going about this the wrong way?
Most likely this is a problem with TeamCity not finding the path to ruby executables.
You can address this by overriding the value to the PATH environment variable in your build configuration in the Build Parameters section.
env.PATH=/path/to/ruby;%env.PATH%
See this answer for the proper links to documentation, etc.
EDIT #1
I noticed when updating one of my configurations that TeamCity is supposed to take care of appending values so you DO NOT need to set path equal to itself. The post mentioned above is a workaround for a bug where TeamCity was overwriting the values, but that has been corrected. See the help at the mouse-over for more information:
EDIT #2
I tested edit #1 and found that is not the case. You do need to
create an environment variable env.Path
and set it's value to itself plus your new path; in my example, C:\Program Files\MySQL\MySQL Server 5.6\bin\;%env.Path%
you do NOT need to say env.Path=... as listed above; that is what the configuration file will look like.
I tested this out by doing the following:
Created a new project with no repository
Added a command line build step to `echo %env.Path%
Added a command step to call MySql mysql --help This will fail if it cannot find MySql
I then ran it for each of the following settings for the env.Path variable:
Not added / changed; TeamCity reports out the environment variable for the build agent as is.
Added as just C:\Program Files\MySQL\MySQL Server 5.6\bin\. TeamCity reports out only that entry.
Added as C:\Program Files\MySQL\MySQL Server 5.6\bin\;%env.Path%. TeamCity prepends C:\Program Files\MySQL\MySQL Server 5.6\bin\ to the build agent's values shown in #1. The result is what we want, #1 + #2
I'm ask/answering this question because it hung me up & it's likely someone else will have the same problem.
Install of RabbitMQ x64 v2.8.6 on Windows Server 2008 x64.
After Erlang install using default install location to C:\Program Files\erl5.9.2, I'm attempting to start the server via running the rabbitmq-service.bat. Fail:
Please either set ERLANG_HOME to point to your Erlang installation
or place the RabbitMQ server distribution in the Erlang lib folder.
Problem is the .bat file does not have the correct subpath. with 5.9.2 (R15B02) version of erlang. My ERLANG_HOME directory is set correctly, but the script does not use it correctly for this version of Erlang, which, it appears to this Erlang noob to have a new subdirectory called "erts-5.9.2" which is causing the problems. Maybe someone intimate with these scripts can describe how to make this work correctly without the hack workaround I'm about to describe?
1- Set environment variable:
Variable name : ERLANG_HOME
Variable value: C:\Program Files (x86)\erl6.4
note: don't include bin on above step.
2- Add %ERLANG_HOME%\bin to the PATH environmental variable:
Variable name : PATH
Variable value: %ERLANG_HOME%\bin
This works well.
There are several RabbitMQ control .bat files on windows. Every one you use needs to get changed to reflect the Erlang path correctly. In this example, I'm editing the rabbitmq-server.bat because it's one of the easier ones... any of the .bat files you want to run will need this hack to get them to work, with the rabbitmq_service.bat file being the most involved to adjust.
editing that rabbitmq_server.bat file, you can see on about line 48 or so there's a check to see if the erl.exe is found, but the path isn't correct:
if not exist "!ERLANG_HOME!\bin\erl.exe" (
that path does not match the file structure for the 5.9.2 version of Erlang. I fixed this by simply removing this path check from about line 48 to 58, then, where the .bat actually makes a call to the erl.exe on about line 129 which reads:
"!ERLANG_HOME!\bin\erl.exe"
I simply hardcoded the path to my erl.exe:
"C:\Program Files\erl5.9.2\erts-5.9.2\bin\erl.exe"
With the pathing correct, the rabbitmq .bat files will run.
I had the similar issue, modifying ERLANG_HOME in .bat files did not work. Then I tried echo %ERLANG_HOME% in command prompt, that did not print the environment variable value(I could see that ERLANG_HOME environment variable has been created under advance system settings), that lead me to believe that I need to restart server for 64 bit installation of Erlang. After rebooting server, It worked like a charm. I hope this helps someone.
Just to share an up-to-date answer as of 2019: On Windows Server 2019, after setting up the environment variable, a restart is required to solve the problem.
I got into same kind of problem.
I solved it by doing three changes as given below.
Update Path variable "ERLANG_HOME" : "C:\Program Files\erl8.0" in Environment Variables.
Upadte "Path" variable "Path" : ";%ERLANG_HOME%\bin;"
Give urself FULL CONTROL permissions over "Program Files" in C drive.
It worked for me in this way.
This problem still occurs in Erlang 18.3 (erl7.3) and RabbitMQ 3.6.9 on Windows when upgrading from any older version of RabbitMQ to version 3.6.9. The solution as already stated here is to manually set ERLANG_HOME with 'setx -m ERLANG_HOME "C:\Program Files\erl7.3"' before starting the service.
What happens is that the RabbitMQ 3.6.9 installer removes the environment variable ERLANG_HOME from the system while removing the older version of RabbitMQ. Then, when it proceeds to the installation step, it does not put back the ERLANG_HOME variable. Then, the batch files that start up RabbitMQ cannot find Erlang. They try to find Erlang's home directory using "where.exe" but it always fails after an upgrade.
RabbitMQ's installer also does not kill all of the Erlang background processes, causing many of its files to be undeletable due to the Windows "file in use" problem. This leaves behind "files in use" in %APPDATA%\RabbitMQ and "C:\Program Files\RabbitMQ." These processes are "erl.exe," "erlsrv.exe," and "epmd.exe." The RabbitMQ installer should taskkill these processes after shutting down the RabbitMQ Windows service.
RabbitMQ is rather clunky on Windows.
Download Erlang or OTP - Only one Version of OTP should be installed
Download RabbitMQ installer
Install both exe file as Administrator
Set class path for Erlang. (Setting classpath is a bit troublesome, so follow these steps)
Set a new path with name ERLANG_HOME and value C:\Program Files\erl-23.1 (do not copy bin folder here)
Edit System "path" and add %ERLANG_HOME%\bin
Go to Start - Open rabbitmq command promt and run
rabbitmq-plugins enable rabbitmq_management
Navigate to localhost:15672
Use guest/guest to login
Interesting that this worked for you. There is record of a two bugs in Erl5.9.2 that cause an incomplete installation where %ERLANG_HOME%\bin is not installed.
Either of
* Installed 64bit erlang on 32bit machine
* "The program can't start because MSVCR100.dll is missing from your computer."
https://groups.google.com/d/topic/erlang-programming/wGtFLzapiQ0/discussion
Try 5.9.1 or any other version. They also mention making the future versions of the installer alert you if it fails.
I just had the same problem mentioned here. I installed otp_win64_R15B02 on a Windows 7 machine and everything worked perfectly, but I used the same installer on a Windows 2008 server and the bin directory was not created. I then uninstalled otp_win64_R15B02 and downloaded the otp_win64_R15B02_with_MSVCR100_installer_fix and the bin directory was created.
I suspect the reason it worked on my Windows 7 system is that I have Visual Studio installed and the required libraries were already available which allowed the otp_win64_R15B02 installer to work correctly.
Oh, and if you're installing Erlang to run RabbitMQ the RabbitMQ install will succeed with the broken installer but installing otp_win64_R15B02_with_MSVCR100_installer_fix after RabbitMQ will not work, just un-install and re-install RabbitMQ to resolve this.
Just give C:\Program Files\erl10.6\ not C:\Program Files\erl10.6\bin\erl.exe in the environment variable. If you open the server.bat file I came to know the issueenter image description here
I think this is encoding issue on windows.I see a correct value but I write echo %ERLANG_HOME% on console the value come with question mark. These steps fix it.
1.go environment variable window
2.edit ERLANG_HOME item
3.copy the value, open notepad and paste there
4.copy again on notepad and paste to edit window
5.apply and exit window
6.close command line tools and reopen
7.run rabbitmq bat file.
I solved it in a quick and dirty way,without naming path variables
I've opened the bat file and replaced every occurrence of
!ERLANG_HOME!\bin\erl.exe
with hard coded path for example might be diffrent path for you because of diffrent version
C:\Program Files\erl10.3\erts-10.3\bin\erl.exe
and replaced
%RABBITMQ_HOME%\escript\rabbitmq-plugins
with
C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.14\escript\rabbitmq-plugins
Even I was this problem. The issue was the environment variable ERLANG_HOME=c:\Program Files\erl9.0 which was never existed.
I cross checked the path. The correct path was c:\Program Files\erl9.3.
After correcting the
ERLANG_HOME=c:\Program Files\erl9.3
the problem solved. So, definitely it is a path issue.
In my case, it should be installed erlang using admin role running
If above solutions doesn't work for you then you can try following
Find another compatible version of erlang for your rabbit mq e.g. for rabbit 3.7.x erlang version 20.3.x to 22.0.x all are compatible .
Right click newly downloaded erlang version and from properties select the option to unblock the file .
Run the erlang with admin persssion .
Re run rabbit mq exe
Anyone knows how to fix this ?
It works fine on my env (Me being the developer) and doesn't work on my colleagues machine who unzips the whole
Welcome to Grails null - http://grails.org/
Licensed under Apache Standard License 2.0
Grails home is set to: C:\abc\products\grails-1.1
Base Directory: C:\abc\products\foo\bar
Running script C:\abc\products\grails-1.1\scripts\RunApp.groovy
Environment set to development
Application expects grails version [1.1], but GRAILS_HOME is version [null] - us
e the correct Grails version or run 'grails upgrade' if this Grails version is n
ewer than the version your application expects.
Some clarifications
1) There has been no Grails version change , either on my machine or my colleagues machine. In fact some of them are installing for the first time
2) Under C:\Documents and Settings\myfriend.grails I can see a folder called 'null'
I tried removing this folder - but it gets created he runs my application
3) The way I am giving him the release is- I unzip the whole folder and he unzips it
SO there are three steps
A_ grails create-app to create the APp
B_ Unzip my folder to replace the generated folder
C_ Grails run-app
Things are fine after the step A- but degenerate after Step C
It appears that his Grails installation is corrupted or not set up correctly. I would have him reinstall a fresh copy of Grails - http://www.grails.org/Installation and try again.
The error that you are getting is telling us that the application that you are trying to run is identified as version 1.1 and I assume that this is correct. The fact that Grails is not able to identify what version is installed makes me point to a corrupted or mis-configured Grails installation
If he types 'grails' at the command line what does he see?
I found the problem.
This was because I had added a file- build.properties
And since the file was there- it was expecting it to have certain properties defined in it
Once I renamed it to something else- it started to work