I am trying to figure out what is the difference between these two examples and how preloadTextureAtlases :withCompletionHandler works. Here is the code:
//GameScene.m
-(void)didMoveToView:(SKView *)view {
//First I create an animation, just a node moving from one place to another and backward.
//Then I try to preload two big atlases
[SKTextureAtlas preloadTextureAtlases:#[self.atlasA, self.atlasB] withCompletionHandler:^{
[self setupScene:self.view];
}];
I suppose that preloadTextureAtlases doing loading on background thread because my animation is smooth?
But are there any differences(or it can be problematic somehow) to call preloadTextureAtlases from background thread? Like this:
//GameScene.m
- (void)loadSceneAssetsWithCompletionHandler:(CompletitionHandler)handler {
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_HIGH, 0), ^{
[SKTextureAtlas preloadTextureAtlases:#[self.atlasA, self.atlasB] withCompletionHandler:^{
dispatch_async(dispatch_get_main_queue(), ^{
[self setupScene:self.view];
});
}];
if (!handler){return;}
dispatch_async(dispatch_get_main_queue(), ^{
handler();
});
});
}
And then call this method from didMoveToView:
[self loadSceneAssetsWithCompletionHandler:^{
NSLog(#"Scene loaded");
// Remove loading animation and stuff
}];
You can preload in the background but the question is why would you? Chances are your game cannot start playing until all required assets are loaded so the user will have to wait regardless.
You can preload whatever assets you need to get the game started and background load any additional assets you might require during later game play. Those kind of circumstances are really only required in very complex games and not on the iOS platform.
As for your question on loading in the background while game play is ongoing, there is no definite answer. It all depends on how big of a load, your CPU load, etc... Try it out and see what happens because it sounds like you are asking questions on issues you have not tried out first.
If you are really intent on background tasks, remember that you can add a completion block to your custom methods like this:
-(void)didMoveToView:(SKView *)view {
NSLog(#"start");
[self yourMethodWithCompletionHandler:^{
NSLog(#"task done");
}];
NSLog(#"end");
}
-(void)yourMethodWithCompletionHandler:(void (^)(void))done; {
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
// a task running another thread
for (int i=0; i<100; i++) {
NSLog(#"working");
}
dispatch_async(dispatch_get_main_queue(), ^{
if (done) {
done();
}
});
});
}
Adding the following code to a new project cause a flash of a black screen. It seems to be caused by the fade out animation of the splash screen. Unfortunately, the long process must be on main thread. It is possible to avoid it by delaying it but it is unreliable and lengthens the loading process.
- (void)viewDidAppear:(BOOL)animated
{
[super viewDidAppear:animated];
// A spinner is shown
// This most probably will not cause a black screen
// dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(0.5 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
// [self loadSomething];
// });
// This will not cause a black screen but not suitable for my use
// dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0), ^{
// [self loadSomething];
// });
dispatch_async(dispatch_get_main_queue(), ^{
[self loadSomething];
});
}
- (void)loadSomething
{
NSLog(#"start long process");
NSDate *start = [NSDate date];
while (-[start timeIntervalSinceNow] < 5) {
}
}
Consider why it must be on the main thread and come up with a way to move this processing or minimise it.
You should create a root view controller which displays the app default image and have that view controller displayed (probably with some animation or progress indication) until your processing has completed.
If you're already on your main thread, then there is no need of getting the main thread asynchronously.
dispatch_async(dispatch_get_main_queue(), ^{
});
The above code should be removed.
In case you want to do something or load something, then you should use
performSelectorInBackground
Hope this helps...
In my iOS application, I have a database call that takes some time to complete. I have a spinner visible on the screen while this operation is taking place. I am hitting an error with the app crashing with "com.myapp failed to resume in time" so it seems like it is running the database call on the main thread, causing issues.
Current Code
-(void)timeToDoWork
{
...
[CATransaction flush];
[[DatabaseWorker staticInstance] doWork];
//Additional UI stuff here
...
if([self->myReceiver respondsToSelector:self->myMessage])
{
[self->myReceiver performSelector:self->myMessage];
}
}
To get the doWork function to take place on a background thread, it looks like I can use Grand Central Dispatch:
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_async(queue, ^{
[[DatabaseWorker staticInstance] doWork];
});
However, how do I prevent the execution from continuing until it is complete? Should I end the method after the doWork call, and move everything below it to a new function?
Sample
-(void)timeToDoWork
{
...
[CATransaction flush];
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_async(queue, ^{
[[DatabaseWorker staticInstance] doWork];
dispatch_async(dispatch_get_main_queue(), ^{
[self doneDoingWork];
});
});
}
-(void)doneDoingWork
{
//Additional UI stuff here
...
if([self->myReceiver respondsToSelector:self->myMessage])
{
[self->myReceiver performSelector:self->myMessage];
}
}
Is there a better way to do this?
Prevent execution in main thread from continuing is really bad idea. iOS will terminate your application since main thread should always work with run loop.
I suggest you following way to handle your problem:
Write a "Locker". Let it show some view with animated spinner and no buttons at all.
When you start dispatch async operation just bring it to the front and let it work with run loop.
When your async operation completes close the locker.
You can also use blocks.
e.g..
- (void)doWorkWithCompletionHandler:(void(^)())handler {
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_async(queue, ^{
// do your db stuff here...
dispatch_async(dispatch_get_main_queue(), ^{
handler();
});
});
}
And then use it like that:
[[DatabaseWorker staticInstance] doWorkWithCompletionHandler:^{
// update your UI here, after the db operation is completed.
}];
P.S.
It might be a good idea to copy the handler block.
The error you are receiving suggests that you are doing something in application:didFinishLaunchingWithOptions: or applicationDidBecomeAction: or somewhere else in the launch cycle that is taking too long and the app is getting terminated by the launch watchdog timer. Above all, it is vital that you return as quickly as possible from these methods. I'm not sure where your code fits into the launch cycle; but this explanation seems plausible.
There are all sorts of ways to address this; but taking the lengthy process off the main queue is the first step as you noted. Without knowing more about what main queue objects (e.g. UI) depend on this database transaction, I'd say that your suggested solution is perfectly fine. That is, dispatch the work to a background queue; and on completion dispatch the remaining UI work to the main queue.
Delegates were suggested elsewhere as a solution. That's also workable although you still have to concern yourself with which queue the delegate methods get called on.
I think that you should use a delegate in your DatabaseWorker and the method doWork always run in background, so when the worker finish the work it tell to its delegate that the work is finished. The delegate method must be called in the main thread.
In the case that you have many objects that need to know when the DatabaseWorker finish instead to use a delegate I would use notifications.
EDIT:
In the DatabaseWorker class you need to implement the method doWork like this:
- (void) doWork{
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_async(queue, ^{
//Do the work.
dispatch_async(dispatch_get_main_queue(), ^{
[self.delegate finishWork];
});
});
}
And in the class that implement timeTodoWork:
-(void)timeToDoWork
{
...
[CATransaction flush];
[[DatabaseWorker staticInstance] setDelegate:self];
[[DatabaseWorker staticInstance] doWork];
}
#pragma mark DatabaseWorkerDelegate
- (void) finishWork{
//Additional UI stuff here
...
if([self->myReceiver respondsToSelector:self->myMessage])
{
[self->myReceiver performSelector:self->myMessage];
}
}
Also you can use:
[self performSelectorInBackground:#selector(doWorkInBackground) withObject:nil];
instead of:
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_async(queue, ^{
//Do the work.
});
And add a method:
- (void) doWorkInBackground{
//Do the work
[self.delegate performSelectorOnMainThread:#selector(finishWork) withObject:nil waitUntilDone:NO];
}
I am having some trouble updating my UI using performSelectorOnMainThread. Here is my situation. In my viewDidLoad I set up an activity indicator and a label. Then I call a selector to retrieve some data from a server. Then I call a selector to update the UI after a delay. Here's the code:
- (void)viewDidLoad
{
[super viewDidLoad];
self.reloadSchools = [[UIAlertView alloc] init];
self.reloadSchools.message = #"There was an error loading the schools. Please try again.";
self.reloadSchools.title = #"We're Sorry";
self.schoolPickerLabel = [[UILabel alloc]init];
self.schoolPicker = [[UIPickerView alloc] init];
self.schoolPicker.delegate = self;
self.schoolPicker.dataSource = self;
self.server = [[Server alloc]init];
schoolList = NO;
_activityIndicator = [[UIActivityIndicatorView alloc]initWithActivityIndicatorStyle:UIActivityIndicatorViewStyleGray];
[self.view addSubview:_activityIndicator];
[self.view bringSubviewToFront:_activityIndicator];
[_activityIndicator startAnimating];
[NSThread detachNewThreadSelector: #selector(getSchoolList) toTarget: self withObject: nil];
[self performSelector:#selector(updateUI) withObject:nil afterDelay:20.0];
}
The selector updateUI checks to see if the data was retrieved, and calls a selector on the main thread to update the UI accordingly. Here is the code for these parts:
-(void)updateUI
{
self.schools = [_server returnData];
if(!(self.schools == nil)) {
[self performSelectorOnMainThread:#selector(fillPickerView) withObject:nil waitUntilDone:YES];
}
else {
[self performSelectorOnMainThread:#selector(showError) withObject:nil waitUntilDone:YES];
}
}
-(void)showError {
NSLog(#"show error");
[_activityIndicator stopAnimating];
[self.reloadSchools show];
}
-(void)fillPickerView {
NSLog(#"fill picker view");
schoolList = YES;
NSString *schoolString = [[NSString alloc] initWithData:self.schools encoding:NSUTF8StringEncoding];
self.schoolPickerLabel.text = #"Please select your school:";
self.shoolArray = [[schoolString componentsSeparatedByString:#"#"] mutableCopy];
[self.schoolPicker reloadAllComponents];
[_activityIndicator stopAnimating];
}
When the selector fillPickerView is called the activity indicator keeps spinning, the label text doesn't change, and the picker view doesn't reload its content. Can someone explain to me why the method I am using isn't working to update my ui on the main thread?
dispatch_async(dispatch_get_global_queue(0, 0), ^{
//load your data here.
dispatch_async(dispatch_get_main_queue(), ^{
//update UI in main thread.
});
});
First of all you should not be using detachNewThreadSelector. You should use GCD and submit your background task to an async queue. Threads are costly to create. GCD does a much better job of managing system resources.
Ignoring that, your code doesn't make a lot of sense to me. You submit a method, getSchoolList, to run on a background thread. You don't show the code that you are running in the background.
Then use performSelector:withObject:afterDelay to run the method updateUI on the main thread after a fixed delay of 20 seconds.
updateUI checks for self.schools, which presumably was set up by your background thread, and may or may not be done. If self.schools IS nil, you call fillPickerView using performSelectorOnMainThread. That doesn't make sense because if self.schools is nil, there is no data to fill the picker.
If self.schools is not nil, you display an error, again using performSelectorOnMainThread.
It seems to me that the logic on your check of self.schools is backwards. If it is nil you should display an error and if it is NOT nil you should fill the picker.
Next problem: In both cases you're calling performSelectorOnMainThread:withObject:waitUntilDone: from the main thread. Calling that method from the main thread doesn't make sense.
Third problem: It doesn't make sense to wait an arbitrary amount of time for a background task to run to completion, and then either succeed or fail. You won't have any idea what's going on for the full 20 seconds. If the background task finishes sooner, you'll never know.
Instead, you should have your background task notify the main thread once the task is done. That would be a valid use of performSelectorOnMainThread:withObject:waitUntilDone:, while calling it from the main thread is not. (Again, though, you should refactor this code to use GCD, not using threads directly.
It seems pretty clear that you are in over your head. The code you posted needs to be rewritten completely.
If you are an advanced user of drawRect, you will know that of course drawRect will not actually run until "all processing is finished."
setNeedsDisplay flags a view as invalidated and the OS, and basically waits until all processing is done. This can be infuriating in the common situation where you want to have:
a view controller 1
starts some function 2
which incrementally 3
creates a more and more complicated artwork and 4
at each step, you setNeedsDisplay (wrong!) 5
until all the work is done 6
Of course, when you do the above 1-6, all that happens is that drawRect is run once only after step 6.
Your goal is for the view to be refreshed at point 5. What to do?
If I understand your question correctly, there is a simple solution to this. During your long-running routine you need to tell the current runloop to process for a single iteration (or more, of the runloop) at certain points in your own processing. e.g, when you want to update the display. Any views with dirty update regions will have their drawRect: methods called when you run the runloop.
To tell the current runloop to process for one iteration (and then return to you...):
[[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];
Here's an example of an (inefficient) long running routine with a corresponding drawRect - each in the context of a custom UIView:
- (void) longRunningRoutine:(id)sender
{
srand( time( NULL ) );
CGFloat x = 0;
CGFloat y = 0;
[_path moveToPoint: CGPointMake(0, 0)];
for ( int j = 0 ; j < 1000 ; j++ )
{
x = 0;
y = (CGFloat)(rand() % (int)self.bounds.size.height);
[_path addLineToPoint: CGPointMake( x, y)];
y = 0;
x = (CGFloat)(rand() % (int)self.bounds.size.width);
[_path addLineToPoint: CGPointMake( x, y)];
x = self.bounds.size.width;
y = (CGFloat)(rand() % (int)self.bounds.size.height);
[_path addLineToPoint: CGPointMake( x, y)];
y = self.bounds.size.height;
x = (CGFloat)(rand() % (int)self.bounds.size.width);
[_path addLineToPoint: CGPointMake( x, y)];
[self setNeedsDisplay];
[[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];
}
[_path removeAllPoints];
}
- (void) drawRect:(CGRect)rect
{
CGContextRef ctx = UIGraphicsGetCurrentContext();
CGContextSetFillColorWithColor( ctx, [UIColor blueColor].CGColor );
CGContextFillRect( ctx, rect);
CGContextSetStrokeColorWithColor( ctx, [UIColor whiteColor].CGColor );
[_path stroke];
}
And here is a fully working sample demonstrating this technique.
With some tweaking you can probably adjust this to make the rest of the UI (i.e. user-input) responsive as well.
Update (caveat for using this technique)
I just want to say that I agree with much of the feedback from others here saying this solution (calling runMode: to force a call to drawRect:) isn't necessarily a great idea. I've answered this question with what I feel is a factual "here's how" answer to the stated question, and I am not intending to promote this as "correct" architecture. Also, I'm not saying there might not be other (better?) ways to achieve the same effect - certainly there may be other approaches that I wasn't aware of.
Update (response to the Joe's sample code and performance question)
The performance slowdown you're seeing is the overhead of running the runloop on each iteration of your drawing code, which includes rendering the layer to the screen as well as all of the other processing the runloop does such as input gathering and processing.
One option might be to invoke the runloop less frequently.
Another option might be to optimize your drawing code. As it stands (and I don't know if this is your actual app, or just your sample...) there are a handful of things you could do to make it faster. The first thing I would do is move all the UIGraphicsGet/Save/Restore code outside the loop.
From an architectural standpoint however, I would highly recommend considering some of the other approaches mentioned here. I see no reason why you can't structure your drawing to happen on a background thread (algorithm unchanged), and use a timer or other mechanism to signal the main thread to update it's UI on some frequency until the drawing is complete. I think most of the folks who've participated in the discussion would agree that this would be the "correct" approach.
Updates to the user interface happen at the end of the current pass through the run loop. These updates are performed on the main thread, so anything that runs for a long time in the main thread (lengthy calculations, etc.) will prevent the interface updates from being started. Additionally, anything that runs for a while on the main thread will also cause your touch handling to be unresponsive.
This means that there is no way to "force" a UI refresh to occur from some other point in a process running on the main thread. The previous statement is not entirely correct, as Tom's answer shows. You can allow the run loop to come to completion in the middle of operations performed on the main thread. However, this still may reduce the responsiveness of your application.
In general, it is recommended that you move anything that takes a while to perform to a background thread so that the user interface can remain responsive. However, any updates you wish to perform to the UI need to be done back on the main thread.
Perhaps the easiest way to do this under Snow Leopard and iOS 4.0+ is to use blocks, like in the following rudimentary sample:
dispatch_queue_t main_queue = dispatch_get_main_queue();
dispatch_async(queue, ^{
// Do some work
dispatch_async(main_queue, ^{
// Update the UI
});
});
The Do some work part of the above could be a lengthy calculation, or an operation that loops over multiple values. In this example, the UI is only updated at the end of the operation, but if you wanted continuous progress tracking in your UI, you could place the dispatch to the main queue where ever you needed a UI update to be performed.
For older OS versions, you can break off a background thread manually or through an NSOperation. For manual background threading, you can use
[NSThread detachNewThreadSelector:#selector(doWork) toTarget:self withObject:nil];
or
[self performSelectorInBackground:#selector(doWork) withObject:nil];
and then to update the UI you can use
[self performSelectorOnMainThread:#selector(updateProgress) withObject:nil waitUntilDone:NO];
Note that I've found the NO argument in the previous method to be needed to get constant UI updates while dealing with a continuous progress bar.
This sample application I created for my class illustrates how to use both NSOperations and queues for performing background work and then updating the UI when done. Also, my Molecules application uses background threads for processing new structures, with a status bar that is updated as this progresses. You can download the source code to see how I achieved this.
You can do this repeatedly in a loop and it'll work fine, no threads, no messing with the runloop, etc.
[CATransaction begin];
// modify view or views
[view setNeedsDisplay];
[CATransaction commit];
If there is an implicit transaction already in place prior to the loop you need to commit that with [CATransaction commit] before this will work.
In order to get drawRect called the soonest (which is not necessarily immediately, as the OS may still wait until, for instance, the next hardware display refresh, etc.), an app should idle it's UI run loop as soon as possible, by exiting any and all methods in the UI thread, and for a non-zero amount of time.
You can either do this in the main thread by chopping any processing that takes more than an animation frame time into shorter chunks and scheduling continuing work only after a short delay (so drawRect might run in the gaps), or by doing the processing in a background thread, with a periodic call to performSelectorOnMainThread to do a setNeedsDisplay at some reasonable animation frame rate.
A non-OpenGL method to update the display near immediately (which means at the very next hardware display refresh or three) is by swapping visible CALayer contents with an image or CGBitmap that you have drawn into. An app can do Quartz drawing into a Core Graphics bitmap at pretty much at any time.
New added answer:
Please see Brad Larson's comments below and Christopher Lloyd's comment on another answer here as the hint leading towards this solution.
[ CATransaction flush ];
will cause drawRect to be called on views on which a setNeedsDisplay request has been done, even if the flush is done from inside a method that is blocking the UI run loop.
Note that, when blocking the UI thread, a Core Animation flush is required to update changing CALayer contents as well. So, for animating graphic content to show progress, these may both end up being forms of the same thing.
New added note to new added answer above:
Do not flush faster than your drawRect or animation drawing can complete, as this might queue up flushes, causing weird animation effects.
Without questioning the wisdom of this (which you ought to do), you can do:
[myView setNeedsDisplay];
[[myView layer] displayIfNeeded];
-setNeedsDisplay will mark the view as needing to be redrawn.
-displayIfNeeded will force the view's backing layer to redraw, but only if it has been marked as needing to be displayed.
I will emphasize, however, that your question is indicative of an architecture that could use some re-working. In all but exceptionally rare cases, you should never need to or want to force a view to redraw immediately. UIKit with not built with that use-case in mind, and if it works, consider yourself lucky.
Have you tried doing the heavy processing on a secondary thread and calling back to the main thread to schedule view updates? NSOperationQueue makes this sort of thing pretty easy.
Sample code that takes an array of NSURLs as input and asynchronously downloads them all, notifying the main thread as each of them is finished and saved.
- (void)fetchImageWithURLs:(NSArray *)urlArray {
[self.retriveAvatarQueue cancelAllOperations];
self.retriveAvatarQueue = nil;
NSOperationQueue *opQueue = [[NSOperationQueue alloc] init];
for (NSUInteger i=0; i<[urlArray count]; i++) {
NSURL *url = [urlArray objectAtIndex:i];
NSInvocation *inv = [NSInvocation invocationWithMethodSignature:[self methodSignatureForSelector:#selector(cacheImageWithIndex:andURL:)]];
[inv setTarget:self];
[inv setSelector:#selector(cacheImageWithIndex:andURL:)];
[inv setArgument:&i atIndex:2];
[inv setArgument:&url atIndex:3];
NSInvocationOperation *invOp = [[NSInvocationOperation alloc] initWithInvocation:inv];
[opQueue addOperation:invOp];
[invOp release];
}
self.retriveAvatarQueue = opQueue;
[opQueue release];
}
- (void)cacheImageWithIndex:(NSUInteger)index andURL:(NSURL *)url {
NSData *imageData = [NSData dataWithContentsOfURL:url];
NSFileManager *fileManager = [NSFileManager defaultManager];
NSString *filePath = PATH_FOR_IMG_AT_INDEX(index);
NSError *error = nil;
// Save the file
if (![fileManager createFileAtPath:filePath contents:imageData attributes:nil]) {
DLog(#"Error saving file at %#", filePath);
}
// Notifiy the main thread that our file is saved.
[self performSelectorOnMainThread:#selector(imageLoadedAtPath:) withObject:filePath waitUntilDone:NO];
}
I think, the most complete answer comes from the Jeffrey Sambell's blog post 'Asynchronous Operations in iOS with Grand Central Dispatch' and it worked for me!
It's basically the same solution as proposed by Brad above but fully explained in terms of OSX/IOS concurrency model.
The dispatch_get_current_queue function will return the current queue
from which the block is dispatched and the dispatch_get_main_queue
function will return the main queue where your UI is running.
The dispatch_get_main_queue function is very useful for updating the
iOS app’s UI as UIKit methods are not thread safe (with a few
exceptions) so any calls you make to update UI elements must always be
done from the main queue.
A typical GCD call would look something like this:
// Doing something on the main thread
dispatch_queue_t myQueue = dispatch_queue_create("My Queue",NULL);
dispatch_async(myQueue, ^{
// Perform long running process
dispatch_async(dispatch_get_main_queue(), ^{
// Update the UI
});
});
// Continue doing other stuff on the
// main thread while process is running.
And here goes my working example (iOS 6+). It displays frames of a stored video using the AVAssetReader class:
//...prepare the AVAssetReader* asset_reader earlier and start reading frames now:
[asset_reader startReading];
dispatch_queue_t readerQueue = dispatch_queue_create("Reader Queue", NULL);
dispatch_async(readerQueue, ^{
CMSampleBufferRef buffer;
while ( [asset_reader status]==AVAssetReaderStatusReading )
{
buffer = [asset_reader_output copyNextSampleBuffer];
if (buffer!=nil)
{
//The point is here: to use the main queue for actual UI operations
dispatch_async(dispatch_get_main_queue(), ^{
// Update the UI using the AVCaptureVideoDataOutputSampleBufferDelegate style function
[self captureOutput:nil didOutputSampleBuffer:buffer fromConnection:nil];
CFRelease (buffer);
});
}
}
});
The first part of this sample may be found here in Damian's answer.
I'd like to offer a clean solution to the given problem.
I agree with other posters that in an ideal situation all the heavy lifting should be done in a background thread, however there are times when this simply isn't possible because the time consuming part requires lots of accessing to non thread-safe methods such as those offered by UIKit. In my case, initialising my UI is time consuming and there's nothing I can run in the background, so my best option is to update a progress bar during the init.
However, once we think in terms of the ideal GCD approach, the solution is actually a simple. We do all the work in a background thread, dividing it into chucks that are called synchronously on the main thread. The run loop will be run for each chuck, updating the UI and any progress bars etc.
- (void)myInit
{
// Start the work in a background thread.
dispatch_async(dispatch_get_global_queue(0, 0), ^{
// Back to the main thread for a chunk of code
dispatch_sync(dispatch_get_main_queue(), ^{
...
// Update progress bar
self.progressIndicator.progress = ...:
});
// Next chunk
dispatch_sync(dispatch_get_main_queue(), ^{
...
// Update progress bar
self.progressIndicator.progress = ...:
});
...
});
}
Of course, this is essentially the same as Brad's technique, but his answer doesn't quite address the issue at hand - that of running a lot of non thread safe code while updating the UI periodically.
Joe -- if you are willing to set it up so that your lengthy processing all happens inside of drawRect, you can make it work. I just wrote a test project. It works. See code below.
LengthyComputationTestAppDelegate.h:
#import <UIKit/UIKit.h>
#interface LengthyComputationTestAppDelegate : NSObject <UIApplicationDelegate> {
UIWindow *window;
}
#property (nonatomic, retain) IBOutlet UIWindow *window;
#end
LengthComputationTestAppDelegate.m:
#import "LengthyComputationTestAppDelegate.h"
#import "Incrementer.h"
#import "IncrementerProgressView.h"
#implementation LengthyComputationTestAppDelegate
#synthesize window;
#pragma mark -
#pragma mark Application lifecycle
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
// Override point for customization after application launch.
IncrementerProgressView *ipv = [[IncrementerProgressView alloc]initWithFrame:self.window.bounds];
[self.window addSubview:ipv];
[ipv release];
[self.window makeKeyAndVisible];
return YES;
}
Incrementer.h:
#import <Foundation/Foundation.h>
//singleton object
#interface Incrementer : NSObject {
NSUInteger theInteger_;
}
#property (nonatomic) NSUInteger theInteger;
+(Incrementer *) sharedIncrementer;
-(NSUInteger) incrementForTimeInterval: (NSTimeInterval) timeInterval;
-(BOOL) finishedIncrementing;
incrementer.m:
#import "Incrementer.h"
#implementation Incrementer
#synthesize theInteger = theInteger_;
static Incrementer *inc = nil;
-(void) increment {
theInteger_++;
}
-(BOOL) finishedIncrementing {
return (theInteger_>=100000000);
}
-(NSUInteger) incrementForTimeInterval: (NSTimeInterval) timeInterval {
NSTimeInterval negativeTimeInterval = -1*timeInterval;
NSDate *startDate = [NSDate date];
while (!([self finishedIncrementing]) && [startDate timeIntervalSinceNow] > negativeTimeInterval)
[self increment];
return self.theInteger;
}
-(id) init {
if (self = [super init]) {
self.theInteger = 0;
}
return self;
}
#pragma mark --
#pragma mark singleton object methods
+ (Incrementer *) sharedIncrementer {
#synchronized(self) {
if (inc == nil) {
inc = [[Incrementer alloc]init];
}
}
return inc;
}
+ (id)allocWithZone:(NSZone *)zone {
#synchronized(self) {
if (inc == nil) {
inc = [super allocWithZone:zone];
return inc; // assignment and return on first allocation
}
}
return nil; // on subsequent allocation attempts return nil
}
- (id)copyWithZone:(NSZone *)zone
{
return self;
}
- (id)retain {
return self;
}
- (unsigned)retainCount {
return UINT_MAX; // denotes an object that cannot be released
}
- (void)release {
//do nothing
}
- (id)autorelease {
return self;
}
#end
IncrementerProgressView.m:
#import "IncrementerProgressView.h"
#implementation IncrementerProgressView
#synthesize progressLabel = progressLabel_;
#synthesize nextUpdateTimer = nextUpdateTimer_;
-(id) initWithFrame:(CGRect)frame {
if (self = [super initWithFrame: frame]) {
progressLabel_ = [[UILabel alloc]initWithFrame:CGRectMake(20, 40, 300, 30)];
progressLabel_.font = [UIFont systemFontOfSize:26];
progressLabel_.adjustsFontSizeToFitWidth = YES;
progressLabel_.textColor = [UIColor blackColor];
[self addSubview:progressLabel_];
}
return self;
}
-(void) drawRect:(CGRect)rect {
[self.nextUpdateTimer invalidate];
Incrementer *shared = [Incrementer sharedIncrementer];
NSUInteger progress = [shared incrementForTimeInterval: 0.1];
self.progressLabel.text = [NSString stringWithFormat:#"Increments performed: %d", progress];
if (![shared finishedIncrementing])
self.nextUpdateTimer = [NSTimer scheduledTimerWithTimeInterval:0. target:self selector:(#selector(setNeedsDisplay)) userInfo:nil repeats:NO];
}
- (void)dealloc {
[super dealloc];
}
#end
Regarding the original issue:
In a word, you can (A) background the large painting, and call to the foreground for UI updates or (B) arguably controversially there are four 'immediate' methods suggested that do not use a background process. For the result of what works, run the demo program. It has #defines for all five methods.
Alternately per Tom Swift
Tom Swift has explained the amazing idea of quite simply manipulating the run loop. Here's how you trigger the run loop:
[[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];
This is a truly amazing piece of engineering. Of course one should be extremely careful when manipulating the run loop and as many pointed out this approach is strictly for experts.
However, a bizarre problem arises ...
Even though a number of the methods work, they don't actually "work" because there is a bizarre progressive-slow-down artifact you will see clearly in the demo.
Scroll to the 'answer' I pasted in below, showing the console output - you can see how it progressively slows.
Here's the new SO question:
Mysterious "progressive slowing" problem in run loop / drawRect
Here is V2 of the demo app...
http://www.fileswap.com/dl/p8lU3gAi/stepwiseDrawingV2.zip.html
You will see it tests all five methods,
#ifdef TOMSWIFTMETHOD
[self setNeedsDisplay];
[[NSRunLoop currentRunLoop]
runMode:NSDefaultRunLoopMode beforeDate:[NSDate date]];
#endif
#ifdef HOTPAW
[self setNeedsDisplay];
[CATransaction flush];
#endif
#ifdef LLOYDMETHOD
[CATransaction begin];
[self setNeedsDisplay];
[CATransaction commit];
#endif
#ifdef DDLONG
[self setNeedsDisplay];
[[self layer] displayIfNeeded];
#endif
#ifdef BACKGROUNDMETHOD
// here, the painting is being done in the bg, we have been
// called here in the foreground to inval
[self setNeedsDisplay];
#endif
You can see for yourself which methods work and which do not.
you can see the bizarre "progressive-slow-down". Why does it happen?
you can see with the controversial TOMSWIFT method, there is actually no problem at all with responsiveness. tap for response at any time (but still the bizarre "progressive-slow-down" problem)
So the overwhelming thing is this weird "progressive-slow-down": on each iteration, for unknown reasons, the time taken for a loop decreases. Note that this applies to both doing it "properly" (background look) or using one of the 'immediate' methods.
Practical solutions?
For anyone reading in the future, if you are actually unable to get this to work in production code because of the "mystery progressive slowdown", Felz and Void have each presented astounding solutions in the other specific question.