I have the following string
str="HelloWorld How areYou I AmFine"
I want this string into the following array
["Hello","World How are","You I Am", "Fine"]
I have been using the following regex, it splits correctly but it also omits the matching pattern, i also want to retain that pattern.
What i get is
str.split(/[a-z][A-Z]/)
=> ["Hell", "orld How ar", "ou I A", "ine"]
It omitts the matching pattern.
Can any one help me out how to retain these characters as well in the resulting array
In Ruby 1.9 you can use positive lookahead and positive lookbehind (lookahead and lookbehind regex constructs are also called zero-width assertions). They match characters, but then give up the match and only return the result, thus you won't loose your border characters:
str.split /(?<=[a-z])(?=[A-Z])/
=> ["Hello", "World How are", "You I Am", "Fine"]
Ruby 1.8 does not support lookahead/lookbehind constructs. I recommend to use ruby 1.9 if possible.
If you are forced to use ruby 1.8.7, I think regex won't help you and the best solution I can think of is to build a simple state machine: iterate over each character in your original string and build first string until you encounter border condition. Then build second string etc.
Three answers so far, each with a limitation: one is rails-only and breaks with underscore in original string, another is ruby 1.9 only, the third always has a potential error with its special character. I really liked the split on zero-width assertion answer from #Alex Kliuchnikau, but the OP needs ruby 1.8 which doesn't support lookbehind. There's an answer that uses only zero-width lookahead and works fine in 1.8 and 1.9 using String#scan instead of #split.
str.scan /.*?[a-z](?=[A-Z]|$)/
=> ["Hello", "World How are", "You I Am", "Fine"]
I think this will do the job for you
str.underscore.split(/_/).each do |s|
s.capitalize!
end
Related
I am building a Rails 5.2 app.
In this app I got outputs from different suppliers (I am building a webshop).
The name of the shipping provider is in this format:
dhl_freight__233433
It could also be in this format:
postal__US-320202
How can I remove all that is before (and including) the __ so all that remains are the things after the ___ like for example 233433.
Perhaps some sort of RegEx.
A very simple approach would be to use String#split and then pick the second part that is the last part in this example:
"dhl_freight__233433".split('__').last
#=> "233433"
"postal__US-320202".split('__').last
#=> "US-320202"
You can use a very simple Regexp and a ask the resulting MatchData for the post_match part:
p "dhl_freight__233433".match(/__/).post_match
# another (magic) way to acces the post_match part:
p $'
Postscript: Learnt something from this question myself: you don't even have to use a RegExp for this to work. Just "asddfg__qwer".match("__").post_match does the trick (it does the conversion to regexp for you)
r = /[^_]+\z/
"dhl_freight__233433"[r] #=> "233433"
"postal__US-320202"[r] #=> "US-320202"
The regular expression matches one or more characters other than an underscore, followed by the end of the string (\z). The ^ at the beginning of the character class reads, "other than any of the characters that follow".
See String#[].
This assumes that the last underscore is preceded by an underscore. If the last underscore is not preceded by an underscore, in which case there should be no match, add a positive lookbehind:
r = /(?<=__[^_]+\z/
This requires the match to be preceded by two underscores.
There are many ruby ways to extract numbers from string. I hope you're trying to fetch numbers out of a string. Here are some of the ways to do so.
Ref- http://www.ruby-forum.com/topic/125709
line.delete("^0-9")
line.scan(/\d/).join('')
line.tr("^0-9", '')
In the above delete is the fastest to trim numbers out of strings.
All of above extracts numbers from string and joins them. If a string is like this "String-with-67829___numbers-09764" outut would be like this "6782909764"
In case if you want the numbers split like this ["67829", "09764"]
line.split(/[^\d]/).reject { |c| c.empty? }
Hope these answers help you! Happy coding :-)
Hi I've been struggling with this for the last hour and am no closer. How exactly do I strip everything except numbers, commas and decimal points from a rails string? The closest I have so far is:-
rate = rate.gsub!(/[^0-9]/i, '')
This strips everything but the numbers. When I try add commas to the expression, everything is getting stripped. I got the aboves from somewhere else and as far as I can gather:
^ = not
Everything to the left of the comma gets replaced by what's in the '' on the right
No idea what the /i does
I'm very new to gsub. Does anyone know of a good tutorial on building expressions?
Thanks
Try:
rate = rate.gsub(/[^0-9,\.]/, '')
Basically, you know the ^ means not when inside the character class brackets [] which you are using, and then you can just add the comma to the list. The decimal needs to be escaped with a backslash because in regular expressions they are a special character that means "match anything".
Also, be aware of whether you are using gsub or gsub!
gsub! has the bang, so it edits the instance of the string you're passing in, rather than returning another one.
So if using gsub! it would be:
rate.gsub!(/[^0-9,\.]/, '')
And rate would be altered.
If you do not want to alter the original variable, then you can use the version without the bang (and assign it to a different var):
cleaned_rate = rate.gsub!(/[^0-9,\.]/, '')
I'd just google for tutorials. I haven't used one. Regexes are a LOT of time and trial and error (and table-flipping).
This is a cool tool to use with a mini cheat-sheet on it for ruby that allows you to quickly edit and test your expression:
http://rubular.com/
You can just add the comma and period in the square-bracketed expression:
rate.gsub(/[^0-9,.]/, '')
You don't need the i for case-insensitivity for numbers and symbols.
There's lots of info on regular expressions, regex, etc. Maybe search for those instead of gsub.
You can use this:
rate = rate.gsub!(/[^0-9\.\,]/g,'')
Also check this out to learn more about regular expressions:
http://www.regexr.com/
I'm trying to split a string and counts the number os words using Ruby but I want ignore special characters.
For example, in this string "Hello, my name is Hugo ..." I'm splitting it by spaces but the last ... should't counts because it isn't a word.
I'm using string.inner_text.split(' ').length. How can I specify that special characters (such as ... ? ! etc.) when separated from the text by spaces are not counted?
Thank you to everyone,
Kind Regards,
Hugo
"Hello, my name is não ...".scan /[^*!#%\^\s\.]+/
# => ["Hello,", "my", "name", "is", "não"]
/[^*!#%\^]+/ will match anything other than *!#%\^. You can add more to this list which need not be matched
this is part answer, part response to #Neo's answer: why not use proper tools for the job?
http://www.ruby-doc.org/core-1.9.3/Regexp.html says:
POSIX bracket expressions are also similar to character classes. They provide a portable alternative to the above, with the added benefit that they encompass non-ASCII characters. For instance, /\d/ matches only the ASCII decimal digits (0-9); whereas /[[:digit:]]/ matches any character in the Unicode Nd category.
/[[:alnum:]]/ - Alphabetic and numeric character
/[[:alpha:]]/ - Alphabetic character
...
Ruby also supports the following non-POSIX character classes:
/[[:word:]]/ - A character in one of the following Unicode general categories Letter, Mark, Number, Connector_Punctuation
you want words, use str.scan /[[:word:]]+/
I'm currently reading Agile Web Development With Rails, 3rd edition. On page 672, I came across this method:
def capitalize_words(string)
string.gsub(/\b\w/) { $&.upcase }
end
What is the code in the block doing? I have never seen that syntax. Is it similar to the array.map(&:some_method) syntax?
It's Title Casing The Input. inside the block, $& is a built-in representing the current match (\b\w i.e. the first letter of each word) which is then uppercased.
You've touched on one of the few things I don't like about Ruby :)
The magic variable $& contains the matched string from the previous successful pattern match. So in this case, it'll be the first character of each word.
This is mentioned in the RDoc for String.gsub:
http://ruby-doc.org/core/classes/String.html#M000817
gsub replaces everything that matched in the regex with the result of the block. so yes, in this case you're matching the first letter of words, then replacing it with the upcased version.
as to the slightly bizarre syntax inside the block, this is equivalent (and perhaps easier to understand):
def capitalize_words(string)
string.gsub(/\b\w/) {|x| x.upcase}
end
or even slicker:
def capitalize_words(string)
string.gsub /\b\w/, &:upcase
end
as to the regex (courtesy the pickaxe book), \b matches a word boundary, and \w any 'word character' (alphanumerics and underscore). so \b\w matches the first character of the word.
I have an ActiveRecord model, Foo, which has a name field. I'd like users to be able to search by name, but I'd like the search to ignore case and any accents. Thus, I'm also storing a canonical_name field against which to search:
class Foo
validates_presence_of :name
before_validate :set_canonical_name
private
def set_canonical_name
self.canonical_name ||= canonicalize(self.name) if self.name
end
def canonicalize(x)
x.downcase. # something here
end
end
I need to fill in the "something here" to replace the accented characters. Is there anything better than
x.downcase.gsub(/[àáâãäå]/,'a').gsub(/æ/,'ae').gsub(/ç/, 'c').gsub(/[èéêë]/,'e')....
And, for that matter, since I'm not on Ruby 1.9, I can't put those Unicode literals in my code. The actual regular expressions will look much uglier.
ActiveSupport::Inflector.transliterate (requires Rails 2.2.1+ and Ruby 1.9 or 1.8.7)
example:
>> ActiveSupport::Inflector.transliterate("àáâãäå").to_s
=> "aaaaaa"
Rails has already a builtin for normalizing, you just have to use this to normalize your string to form KD and then remove the other chars (i.e. accent marks) like this:
>> "àáâãäå".mb_chars.normalize(:kd).gsub(/[^\x00-\x7F]/n,'').downcase.to_s
=> "aaaaaa"
Better yet is to use I18n:
1.9.3-p392 :001 > require "i18n"
=> false
1.9.3-p392 :002 > I18n.transliterate("Olá Mundo!")
=> "Ola Mundo!"
I have tried a lot of this approaches but they were not achieving one or several of these requirements:
Respect spaces
Respect 'ñ' character
Respect case (I know is not a requirement for the original question but is not difficult to move an string to lowcase)
Has been this:
# coding: utf-8
string.tr(
"ÀÁÂÃÄÅàáâãäåĀāĂ㥹ÇçĆćĈĉĊċČčÐðĎďĐđÈÉÊËèéêëĒēĔĕĖėĘęĚěĜĝĞğĠġĢģĤĥĦħÌÍÎÏìíîïĨĩĪīĬĭĮįİıĴĵĶķĸĹĺĻļĽľĿŀŁłÑñŃńŅņŇňʼnŊŋÒÓÔÕÖØòóôõöøŌōŎŏŐőŔŕŖŗŘřŚśŜŝŞşŠšſŢţŤťŦŧÙÚÛÜùúûüŨũŪūŬŭŮůŰűŲųŴŵÝýÿŶŷŸŹźŻżŽž",
"AAAAAAaaaaaaAaAaAaCcCcCcCcCcDdDdDdEEEEeeeeEeEeEeEeEeGgGgGgGgHhHhIIIIiiiiIiIiIiIiIiJjKkkLlLlLlLlLlNnNnNnNnnNnOOOOOOooooooOoOoOoRrRrRrSsSsSsSssTtTtTtUUUUuuuuUuUuUuUuUuUuWwYyyYyYZzZzZz"
)
– http://blog.slashpoundbang.com/post/12938588984/remove-all-accents-and-diacritics-from-string-in-ruby
You have to modify a little bit the character list to respect 'ñ' character but is an easy job.
My answer: the String#parameterize method:
"Le cœur de la crémiére".parameterize
=> "le-coeur-de-la-cremiere"
For non-Rails programs:
Install activesupport: gem install activesupport then:
require 'active_support/inflector'
"a&]'s--3\014\xC2àáâã3D".parameterize
# => "a-s-3-3d"
Decompose the string and remove non-spacing marks from it.
irb -ractive_support/all
> "àáâãäå".mb_chars.normalize(:kd).gsub(/\p{Mn}/, '')
aaaaaa
You may also need this if used in a .rb file.
# coding: utf-8
the normalize(:kd) part here splits out diacriticals where possible (ex: the "n with tilda" single character is split into an n followed by a combining diacritical tilda character), and the gsub part then removes all the diacritical characters.
I think that you maybe don't really what to go down that path. If you are developing for a market that has these kind of letters your users probably will think you are a sort of ...pip.
Because 'å' isn't even close to 'a' in any meaning to a user.
Take a different road and read up about searching in a non-ascii way. This is just one of those cases someone invented unicode and collation.
A very late PS:
http://www.w3.org/International/wiki/Case_folding
http://www.w3.org/TR/charmod-norm/#sec-WhyNormalization
Besides that I have no ide way the link to collation go to a msdn page but I leave it there. It should have been http://www.unicode.org/reports/tr10/
This assumes you use Rails.
"anything".parameterize.underscore.humanize.downcase
Given your requirements, this is probably what I'd do... I think it's neat, simple and will stay up to date in future versions of Rails and Ruby.
Update: dgilperez pointed out that parameterize takes a separator argument, so "anything".parameterize(" ") (deprecated) or "anything".parameterize(separator: " ") is shorter and cleaner.
Convert the text to normalization form D, remove all codepoints with unicode category non spacing mark (Mn), and convert it back to normalization form C. This will strip all diacritics, and your problem is reduced to a case insensitive search.
See http://www.siao2.com/2005/02/19/376617.aspx and http://www.siao2.com/2007/05/14/2629747.aspx for details.
The key is to use two columns in your database: canonical_text and original_text. Use original_text for display and canonical_text for searches. That way, if a user searches for "Visual Cafe," she sees the "Visual Café" result. If she really wants a different item called "Visual Cafe," it can be saved separately.
To get the canonical_text characters in a Ruby 1.8 source file, do something like this:
register_replacement([0x008A].pack('U'), 'S')
You probably want Unicode decomposition ("NFD"). After decomposing the string, just filter out anything not in [A-Za-z]. æ will decompose to "ae", ã to "a~" (approximately - the diacritical will become a separate character) so the filtering leaves a reasonable approximation.
iconv:
http://groups.google.com/group/ruby-talk-google/browse_frm/thread/8064dcac15d688ce?
=============
a perl module which i can't understand:
http://www.ahinea.com/en/tech/accented-translate.html
============
brute force (there's a lot of htose critters!:
http://projects.jkraemer.net/acts_as_ferret/wiki#UTF-8support
http://snippets.dzone.com/posts/show/2384
I had problems getting the foo.mb_chars.normalize(:kd).gsub(/[^\x00-\x7F]/n,'').downcase.to_s solution to work. I'm not using Rails and there was some conflict with my activesupport/ruby versions that I couldn't get to the bottom of.
Using the ruby-unf gem seems to be a good substitute:
require 'unf'
foo.to_nfd.gsub(/[^\x00-\x7F]/n,'').downcase
As far as I can tell this does the same thing as .mb_chars.normalize(:kd). Is this correct? Thanks!
If you are using PostgreSQL => 9.4 as your DB adapter, maybe you could add in a migration it's "unaccent" extension that I think does what you want, like this:
def self.up
enable_extension "unaccent" # No falla si ya existe
end
In order to test, in the console:
2.3.1 :045 > ActiveRecord::Base.connection.execute("SELECT unaccent('unaccent', 'àáâãäåÁÄ')").first
=> {"unaccent"=>"aaaaaaAA"}
Notice there is case sensitive up to now.
Then, maybe use it in a scope, like:
scope :with_canonical_name, -> (name) {
where("unaccent(foos.name) iLIKE unaccent('#{name}')")
}
The iLIKE operator makes the search case insensitive. There is another approach, using citext data type. Here is a discussion about this two approaches. Notice also that use of PosgreSQL's lower() function is not recommended.
This will save you some DB space, since you will no longer require the cannonical_name field, and perhaps make your model simpler, at the cost of some extra processing in each query, in an amount depending of whether you are using iLIKE or citext, and your dataset.
If you are using MySQL maybe you can use this simple solution, but I have not tested it.
lol.. i just tryed this.. and it is working.. iam still not pretty sure why.. but when i use this 4 lines of code:
str = str.gsub(/[^a-zA-Z0-9 ]/,"")
str = str.gsub(/[ ]+/," ")
str = str.gsub(/ /,"-")
str = str.downcase
it automaticly removes any accent from filenames.. which i was trying to remove(accent from filenames and renaming them than) hope it helped :)