I am new to MeeGo.Problem is do not know how to create a wireless ad-hoc network.
Network controller is Broadcom Corporation BCM4313 802.11b/g/n.
According to https://wiki.archlinux.org/index.php/Broadcom_wireless they have mentioned the brcmsmac driver to be used.
Now MeeGo system is only able to connect to an access point.
To make it into ad-hoc mode I issued
user# iwconfig wlan0 mode ad-hoc
Error for wireless request "Set Mode" (8B06):
SET failed on device wlan0 ; Operation not supported.
where the problem lies does it is with the adapter or with driver? I want to create a network of ad-hoc systems.
Related
I would like to set up SMS notifications for the infrastructure auditing application. the application server stands on hyper-v. huawei modem is in a physical machine because hyper-v is not possible to connect usb. on this machine I set something like netsh interface portproxy add v4tov4 listenaddress=server address listenport=10080 connectaddress=192.168.8.1 connectport=80.
for some reason, port 10080 does not open, there is no communication between hyper-v and the machine with the modem. manual opening of the port on the firewall does not work. through cmd does not work. modem works correctly because when it is installed locally - notifications work. does anyone know where the problem may lie? how to communicate machines?
I am working on an embedded linux based device that runs ubuntu. Now the device driver for the wifi is really crappy so I cannot create a hotspot so this device connects to another device which is running a hotspot. Now I am connecting to that device for some input but at the same time connecting to internet to send mqtt message using paho mqtt in python via a gsm modem. The modem connect to internet using pon command and it works nicely. But when both connections are running, paho-mqtt cannot connect to internet anymore. pinging using -I ppp0 works fine. I tried to bind ppp0 ip address to paho-mqtt client using the bind_address argument but it does not work. How to resolve this issue?
I'm using Pimoroni Rainbow-Hat Raspberry pi3 kit. I have loaded android things image on sdcard. I have power cable and ethernet cable connected.
I can see Android things boot screen on display but i don't see the IP.
When i try to connect with adb connect Android.local it's not working(getting unknow host). I tried the ethernet cable from pi3 ethernet port to laptop , i can see the lan ip when i do ipconfig /all but when i try adb connect <-ip-:5555, still connection gets refused. but am able ping to the ip.
I am using Windows 7 OS.
Tried turning off IP v6, Windows Firewall, rebooting host etc, still not able to connect.
My main problem is getting the Aot device recognised on the host and load the app onto it.
I'm aware but haven't tried usb to ttl serial cable option mentioned here
I'm familiar with Android but new to iot/Aot , any help about where i am going wrong would be appreciated.
When i try to connect with adb connect Android.local it's not working(getting unknow host).
I tried the ethernet cable from pi3 ethernet port to laptop
The Raspberry Pi is a computer in its own right.
You need to connect the ethernet cable from the Pi3 to your router aka to the local network (not into your computer directly)
The follow the steps from the docs here and setup wifi to avoid further cable issues.
I built the SimpleTunnel sample app (provided by apple) and am running the VPN client on a IOS device and the VPN server (tunnel_server) on a MAC running OS 10.11 (OS X El Capitan)
On MAC :-
$ sudo ./tunnel_server 550 ../../tunnel_server/config.plist
Response :-
tunnel_server[87725:2604682] Starting network service on port 550
tunnel_server[87725:2604682] Network service published successfully
On IOS device :-
Next I ran the PacketTunnel app on my IOS device. Added a VPN configuration with the correct IP address (the IP address of the MAC running the tunnel_server) and the port number (port number for the tunnel_server which is 550).
Next I try to connect to the VPN from the IO device and this seems to go through fine as I see the VPN sign in status bar.
Response on the screen running tunnel_server :-
tunnel_server[87739:2606312] Accepted a new connection
tunnel_server[87739:2606312] Allocated address Optional("10.8.0.15")
However I am not able to browse the internet using Safari on the IOS device (it times out), but am able to do the same from the MAC.
Any insights on what I might be missing ?
Please note that my MAC doesn't have OS X server installed. Also I did run the following two comands from a terminal before starting the tunnel_server on the MAC
sudo sysctl net.inet.ip.forwarding=1
sudo sysctl net.inet.ip.fw.enable=1
I am using hostapd to create an adhoc WPA secured wifi network, everything is working fine. From another machine I can connect with no issues.
However when hostapd is running the command:
iwlist wlan0 scan
returns:
wlan0 Interface doesn't support scanning : Operation not supported
If I kill the hostapd process and bring up the wlan0 interface then scan works correctly and returns the ssids of nearby networks.
I want to be able to scan while hostapd is running. How to do this?
This capability depends on your wireless chipset. Some support this and others do not.