- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event
{
CGFloat xpos = responseView.frame.origin.x;
CGFloat ypos = responseView.frame.origin.y;
[UIView transitionWithView:responseView duration:1 options:UIModalTransitionStyleCrossDissolve animations:^{ responseView.frame = CGRectMake(xpos,ypos,720,700);
[responseView.superview bringSubviewToFront:responseView];
[responseView.superview addSubview:responseView];
}
completion: ^(BOOL finished) {NSLog(#"DONE");}];
}
I want to apply a view transition with animation.I tried the code below.The code is working fine ,Now I need to change the type of the animation in a attractive manner.Please give me a suggestion
UIModalTransitionStyleCrossDissolve is not a valid animation option (though it may still work because enums are just integers after all).
For the transition style, you have the following options:
UIViewAnimationOptionTransitionFlipFromLeft
UIViewAnimationOptionTransitionFlipFromRight
UIViewAnimationOptionTransitionCurlUp
UIViewAnimationOptionTransitionCurlDown
UIViewAnimationOptionTransitionCrossDissolve
UIViewAnimationOptionTransitionFlipFromTop
UIViewAnimationOptionTransitionFlipFromBottom
You'll have to decide for yourself which looks best.
Related
I have a problem with the setting UIViewAnimationOptionAutoReverse.
Here is my code.
CALayer *aniLayer = act.viewToChange.layer;
[UIView animateWithDuration:2.0 delay:1.0 options:(UIViewAnimationCurveLinear | UIViewAnimationOptionAutoreverse) animations:^{
viewToAnimate.frame = GCRectMake(1,1,100,100);
[aniLayer setValue:[NSNumber numberWithFloat:degreesToRadians(34)] forKeyPath:#"transform.rotation"];
} completion:nil ];
The problem is that, after the animation has reversed, the view jumps back to the frame set in the animation block. I want the view to grow and "ungrow" and stop at its original position.
Is there a solution without programming two consecutive animations?
You have three options.
When you use the -[UIView animateWithDuration:…] methods, the changes you make in the animations block are applied immediately to the views in question. However, there is also an implicit CAAnimation applied to the view that animates from the old value to the new value. When a CAAnimation is active on a view, it changes the displayed view, but does not change the actual properties of the view.
For example, if you do this:
NSLog(#"old center: %#", NSStringFromCGPoint(someView.center));
[UIView animateWithDuration:2.0 animations: ^{ someView.center = newPoint; }];
NSLog(#"new center: %#", NSStringFromCGPoint(someView.center));
you will see that 'old center' and 'new center' are different; new center will immediately reflect the values of newPoint. However, the CAAnimation that was implicitly created will cause the view to still be displayed at the old center and smoothly move its way to the new center. When the animation finishes, it is removed from the view and you switch back to just seeing the actual model values.
When you pass UIViewAnimationOptionAutoreverse, it affects the implicitly created CAAnimation, but does NOT affect the actual change you're making to the values. That is, if our example above had the UIViewAnimationOptionAutoreverse defined, then the implicitly created CAAnimation would animate from oldCenter to newCenter and back. The animation would then be removed, and we'd switch back to seeing the values we set… which is still at the new position.
As I said, there are three ways to deal with this. The first is to add a completion block on the animation to reverse it, like so:
First Option
CGPoint oldCenter = someView.center;
[UIView animateWithDuration:2.0
animations: ^{ someView.center = newPoint; }
completion:
^(BOOL finished) {
[UIView animateWithDuration:2.0
animations:^{ someView.center = oldCenter; }];
}];
Second Option
The second option is to autoreverse the animation like you're doing, and set the view back to its original position in a completion block:
CGPoint oldCenter = someView.center;
[UIView animateWithDuration:2.0
delay:0
options: UIViewAnimationOptionAutoreverse
animations: ^{ someView.center = newPoint; }
completion: ^(BOOL finished) { someView.center = oldCenter; }];
However, this may cause flickering between the time that the animation autoreverse completes and when the completion block runs, so it's probably not your best choice.
Third Option
The last option is to simply create a CAAnimation directly. When you don't actually want to change the final value of the property you're changing, this is often simpler.
#import <QuartzCore/QuartzCore.h>
CABasicAnimation *animation = [CABasicAnimation animationWithKeyPath:#"position"];
animation.autoreverses = YES;
animation.repeatCount = 1; // Play it just once, and then reverse it
animation.toValue = [NSValue valueWithCGPoint:newPoint];
[someView.layer addAnimation:animation forKey:nil];
Note that the CAAnimation way of doing things never changes the actual values of the view; it just masks the actual values with an animation. The view still thinks it's in the original location. (This means, for example, that if your view responds to touch events, it will still be watching for those touch events to happen at the original location. The animation only changes the way the view draws; nothing else.
The CAAnimation way also requires that you add it to the view's underlying CALayer. If this scares you, feel free to use the -[UIView animateWithDuration:…] methods instead. There's additional functionality available by using CAAnimation, but if it's something you're not familiar with, chaining UIView animations or resetting it in the completion block is perfectly acceptable. In fact, that's one of the main purposes of the completion block.
So, there you go. Three different ways to reverse an animation and keep the original value. Enjoy!
Here's my solution. For 2x repeat, animate 1.5x and do the last 0.5x part by yourself:
[UIView animateWithDuration:.3
delay:.0f
options:(UIViewAnimationOptionRepeat|
UIViewAnimationOptionAutoreverse)
animations:^{
[UIView setAnimationRepeatCount:1.5f];
... animate here ...
} completion:^(BOOL finished) {
[UIView animateWithDuration:.3 animations:^{
... finish the animation here ....
}];
}];
No flashing, works nice.
There is a repeatCount property on CAMediaTiming. I think you have to create an explicit CAAnimation object, and configure it properly. The repeatCount for grow and ungrow would be 2, but you can test this.
Something a long the lines of this. You would need two CAAnimation objects though, one for the frame and one for the rotation.
CABasicAnimation *theAnimation;
theAnimation=[CABasicAnimation animationWithKeyPath:#"transform.rotation"];
theAnimation.duration=3.0;
theAnimation.repeatCount=1;
theAnimation.autoreverses=YES;
theAnimation.fromValue=[NSNumber numberWithFloat:0.0];
theAnimation.toValue=[NSNumber numberWithFloat:degreesToRadians(34)];
[theLayer addAnimation:theAnimation forKey:#"animateRotation"];
AFAIK there is no way to avoid programming two animation objects.
Here is a Swift version of #Rudolf Adamkovič's answer, where you set the animation to run 1.5 times and in the completion block run a 'reverse' animation one final time.
In the below snippet I am translating my view by -10.0 pts on the y-axis 1.5 times. Then in the completion block I animate my view one final time back to its original y-axis position of 0.0.
UIView.animate(withDuration: 0.5, delay: 0.5, options: [.repeat, .autoreverse], animations: {
UIView.setAnimationRepeatCount(1.5)
self.myView.transform = CGAffineTransform(translationX: 0.0, y: -10.0)
}, completion: { finished in
UIView.animate(withDuration: 0.5, delay: 0, options: [], animations: {
self.myView.transform = CGAffineTransform(translationX: 0.0, y: 0.0)
}, completion: nil)
})
I created some animations in my project. Basically, I use UIView animate and CGAffineTransform, but a very strange thing happened and I have no idea. Hope someone can help me solve this problem. Thanks in advance.
This is the strange thing:
After the user clicks on a button, the button slides off screen and another two buttons slide on the screen (I just changed the center point of these buttons to achieve this animation). And, some time later, a view on the screen start shaking (I use CGAffineTransform to achieve this).
At this moment, the strange thing happens - the button that previous slid off screen show up at its original position again and the other two buttons disappear (No animation, just shows up and disappear).
The following is the related code,
1) Button slide off and slide in animation related code
- (IBAction)start:(id)sender
{
// 1. Slide in cancel and pause button
[UIView animateWithDuration:0.5f animations:^{
[startButton setCenter:CGPointMake(startButton.center.x + 300.0f, startButton.center.y)];
[cancelButton setCenter:CGPointMake(cancelButton.center.x + 300.0f, cancelButton.center.y)];
[pauseButton setCenter:CGPointMake(pauseButton.center.x + 300.0f, pauseButton.center.y)];
} completion:^(BOOL finished) {
if (finished) {
NSLog(#"Move finished");
}
}];
}
2) The view shaking animation related code
- (void)shakeView:(UIView *)viewToShake
{
CGFloat t = 2.0;
CGAffineTransform translateRight = CGAffineTransformTranslate(CGAffineTransformIdentity, t, 0.0);
CGAffineTransform translateLeft = CGAffineTransformTranslate(CGAffineTransformIdentity, -t, 0.0);
viewToShake.transform = translateLeft;
[UIView animateWithDuration:0.07 delay:0.0 options:UIViewAnimationOptionAutoreverse|UIViewAnimationOptionRepeat animations:^{
[UIView setAnimationRepeatCount:2.0];
viewToShake.transform = translateRight;
} completion:^(BOOL finished) {
if (finished) {
[UIView animateWithDuration:0.05 delay:0.0 options:UIViewAnimationOptionBeginFromCurrentState animations:^{
viewToShake.transform = CGAffineTransformIdentity;
} completion:nil];
}
}];
}
This isn't weird, it's a common problem with
auto layout. If you move UI elements by changing frames, then as soon as something else takes place that requires laying out views, the moved views will revert to the position defined by their constraints. To fix it, you either need to turn off auto layout, or do your animations by changing constraints not frames.
I have tried your code in my test project. The problem is probably because you are using Autolayout in your xib.
Please checking your xib file and uncheck the Autolayout property.
I want something similar in purpose to Flipboard slight flipping animation on app start. Flipboard when launched has this slight flipping of up and down to show users unfamiliar with the interface that it is flippable.
I have a UIScrollView I want to animate a bit to show the user that it's scrollable. So I want to scroll to the right a little bit and back. UIScrollView has a setContentOffset:animated: message without a completion clause. I find that calling it twice results in seemingly no animation. What if I want an animation after animation in succession?
EDIT:
Thanks Levi for the answer.
And for the record, there is UIViewAnimationOptionAutoreverse and UIViewAnimationOptionRepeat that I can use. So this is what I ended up with that works.
CGPoint offset = self.scrollView.contentOffset;
CGPoint newOffset = CGPointMake(offset.x+100, offset.y);
[UIView animateWithDuration:0.5 delay:0 options:UIViewAnimationOptionCurveEaseIn | UIViewAnimationOptionAutoreverse |UIViewAnimationOptionRepeat animations:^{
[UIView setAnimationRepeatCount: 2];
[self.scrollView setContentOffset:newOffset animated: NO];
} completion:^(BOOL finished) {
[self.scrollView setContentOffset:offset animated:NO];
}];
For a scrollView, tableView or collectionView if you do something like this:
[self.collectionView setContentOffset:CGPointMake(self.collectionView.contentOffset.x+260.0,
self.collectionView.contentOffset.y)
animated:YES];
then you'll get back a:
-(void)scrollViewDidEndScrollingAnimation:(UIScrollView *)scrollView
when the scroll finishes.
You do NOT get this callback if the user moves the view.
Two options:
1) Use the -(void)scrollViewDidEndScrollingAnimation:(UIScrollView *)scrollView delegate callback
2) Try to put it into an animation block (with ... animated:NO];), which has the completion part.
I have a horizontally-scrolling paging UIScrollView in an iPad app, containing lots of pages. On the last page, I tap on a button on the screen to reset back to page 1. I would like to be able to cross-dissolve this transition, but it doesn't seem to work:
[UIView transitionWithView:self.view duration:1.0 options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationOptionAllowAnimatedContent animations:^{
pagingScrollView.contentOffset = CGPointZero;
} completion:^(BOOL finished) {
[self refreshPages];
}];
I read that adding UIViewAnimationOptionAllowAnimatedContent will allow all content to transition, but it doesn't work. Instead, the screen cross-dissolves to the background colour, and when the transition is complete, the first page just appears.
you cannot fade-out a UIView (the scroller) AND simultaneously fade-in the same view...
you could just using different UIViews...
what you can do is:
1) fadeOut the scroller in the current position (to the backGround)
2) while the scroller is invisible, move it to the right position (with no animation)
3) fadeIn the scroller from the backGround
something like:
// START FIRST PART OF ANIMATION
[UIView animateWithDuration:0.5 delay:0.0 options: options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationOptionAllowAnimatedContent animations:^{
pagingScrollView.alpha = 0;
} completion:^(BOOL finished) {
// FIRST PART ENDED
// MOVE SCROLLER (no animation)
pagingScrollView.contentOffset = CGPointZero;
// START SECOND PART OF ANIMATION
[UIView animateWithDuration:0.5 delay:0.0 options: options:UIViewAnimationOptionTransitionCrossDissolve|UIViewAnimationOptionAllowAnimatedContent animations:^{
// fadeIn - animated
pagingScrollView.alpha = 1;
} completion:^(BOOL finished) {
// ANIMATION ENDED
[self refreshPages];
}];
}];
NEW EDIT:
thanks to amadour, who taught me something with his comments,
i hope he could add an answer of his own, i would vote for him
anyway, to answer to jowie original question:
i got the right animation just moving the contentOffset setting out of the animation block,
and removing UIViewAnimationOptionAllowAnimatedContent (not really needed), and passing pagingScrollView as parameter for transitionWithView
this worked for me:
pagingScrollView.contentOffset = CGPointZero;
[UIView transitionWithView:pagingScrollView duration:3.0 options:UIViewAnimationOptionTransitionCrossDissolve animations:^{
// pagingScrollView.contentOffset = CGPointZero; // move up, outside of animation block
} completion:^(BOOL finished) {
NSLog(#"-->> END amimation");
[self refreshPages];
}];
I'm running this code...
[UIView animateWithDuration:0.2
delay:0.0
options:UIViewAnimationOptionCurveEaseOut
animations:^{
CGAffineTransform settingsTransform = CGAffineTransformMakeTranslation(self.settingsView.frame.size.width, 0);
CGAffineTransform speedTransform = CGAffineTransformMakeTranslation(-self.speedView.frame.size.width, 0);
self.settingsView.transform = settingsTransform;
self.speedView.transform = speedTransform;
} completion:nil];
But when it runs the views jump half the transform in the opposite direction before sliding to half a position in the correct direction.
I've slowed down the animation duration to 5 seconds but the initial jump is instantaneous and half the transformation in the wrong direction.
When I animate back using this code...
[UIView animateWithDuration:0.2
delay:0.0
options:UIViewAnimationOptionCurveEaseOut
animations:^{
self.settingsView.transform = CGAffineTransformIdentity;
self.speedView.transform = CGAffineTransformIdentity;
} completion:nil];
It does exactly the same thing.
The result is that the final movement is half the desired transform as it jumps half the transform in the wrong direction first.
I really can't work out why this is happening?
Any ideas.
::EDIT::
Clearing up some possible ambiguity.
I'm not trying to have these views "bounce" back to where they are. The views I'm animating are like control panel at the edge of the screen. When the user presses "go" the view then slide out of the way. When the user presses "stop" the panels slide back into the view.
At least they used to. Since enabling auto layout (which I need for other parts of the app) I can't just change the frame of the views so I went the the transform route.
You can see this effect by sticking a view into a view controller and a button to run the animation.
Thanks
I had the exact same problem so here is the solution I came up with.
CGAffineTransform transform = CGAffineTransformMake(1, 0, 0, 1, translation.x, translation.y);
[UIView animateWithDuration:0.25 animations:^{
_assetImageView.transform = transform;
[self.view layoutIfNeeded];
} completion:^(BOOL finished) {
}];
So I call [self.view layoutIfNeeded]; inside of the animate block. Without this the it has the same problem as you and jumps the distance negative translation first then animates to the correct position from there. I am calling this from a view controller so self is a sub class of UIViewController. In your case "self.view" may not exist but I hope you get the idea.
None of the solutions here worked for me... My animation would always skip. (except when it was right at the end of another animation, hint).
Some details:
The view that was doing this had a series of scale and translates already in the stack.
Solution:
Doing a keyframe animation, with a super short first key that would basically re apply the transform that that the last animation should have set.
UIView.animateKeyframesWithDuration(0.4, delay: 0.0, options: [.CalculationModeCubic], animations: { () -> Void in
//reset start point
UIView.addKeyframeWithRelativeStartTime(0.0, relativeDuration: 0.01, animations: { () -> Void in
self.element.transform = initialTransform
})
UIView.addKeyframeWithRelativeStartTime(0.01, relativeDuration: 0.99, animations: { () -> Void in
self.element.transform = finalTransform
})
}, completion: nil)
OK, having watched the WWDC videos again they state that one of the first things you have to do when using AutoLayout is to remove any calls for setFrame.
Due to the complexity of the screen I have removed the Auto-Layout completely and I'm now using the frame location to move the view around the screen.
Thanks
I've asked Apple Technical Support about this issue and got this response, so it's a bug.
iOS 8 is currently exhibiting a known bug in UIKit animations where
transform animations get the wrong fromValue (primarily affecting the
position of animated objects, making them appear to “jump”
unexpectedly at the start on an animation).
[...]
The workaround until a potential fix is delivered is to drop down to
Core Animation APIs to code your animations.
Here's improved version of Andreas answer
The key difference is that you can specify just one keyframe and get less code
UIView.animateKeyframes(withDuration: animationDuration, delay: 0.0, options: [], animations: {
UIView.addKeyframe(withRelativeStartTime: 0.0, relativeDuration: 1.0, animations: {
animatedView.transform = newTransform
})
}, completion: nil)
Does your settingsView or speedView already have a transformation applied before this animation takes place?
If the transformations for these views is not the identity transformation (aka CGAffineTransformIdentity, aka no transformation), you cannot access their .frame properties.
UIViews' frame properties are invalid when they have a transformation applied to them. Use "bounds" instead.
Since you want your second animation to occurs from the current state of your first animation (whether it is finished or not) I recommend to use the UIViewAnimationOptionLayoutSubviews option when setting your second animation.
[UIView animateWithDuration:0.2
delay:0.0
options:UIViewAnimationOptionCurveEaseOut|UIViewAnimationOptionLayoutSubviews
animations:^{
self.settingsView.transform = CGAffineTransformIdentity;
self.speedView.transform = CGAffineTransformIdentity;
} completion:nil];
Here is a sample of the code i used for testing by using the simple view controller template:
myviewcontroller.m:
- (void)viewDidLoad
{
[super viewDidLoad];
self.animatedView = [[UIView alloc] initWithFrame:CGRectMake(20, 20, 160, 80)];
self.animatedView.backgroundColor = [UIColor yellowColor];
[UIView animateWithDuration:0.2
delay:0.0
options:UIViewAnimationOptionCurveEaseOut|UIViewAnimationOptionLayoutSubviews
animations:^{
CGAffineTransform settingsTransform = CGAffineTransformMakeTranslation(self.animatedView.frame.size.width, 0);
self.animatedView.transform = settingsTransform;
}
completion:nil];
self.buttonToTest = [UIButton buttonWithType:UIButtonTypeRoundedRect];
self.buttonToTest.frame = CGRectMake(90, 20, 80, 40);
[self.buttonToTest setTitle:#"Click Me!" forState:UIControlStateNormal];
[self.buttonToTest addTarget:self action:#selector(buttonClicked) forControlEvents:UIControlEventTouchUpInside];
// set-up view hierarchy
[self.view addSubview:self.buttonToTest];
[self.view addSubview: self.animatedView];
}
- (void) buttonClicked
{
[UIView animateWithDuration:.2
delay:0.0
options:UIViewAnimationOptionCurveEaseOut|UIViewAnimationOptionBeginFromCurrentState|UIViewAnimationOptionLayoutSubviews
animations:^{
self.animatedView.transform = CGAffineTransformIdentity;
}
completion:nil];
}
I had this problem and solved it by:
Hide the original view
Add a temp view that copies the view you want to animate
Carry out animation which will now be as intended
Remove the temp view and unhide the original view with the final state
Hope this helps.
I tried the answers above, about the layoutIfNeeded, but it didn't work.
I added the layoutIfNeeded outside (before) the animation block and it solved my problem.
view.layoutIfNeeded()
UIView.animate(withDuration: duration, delay: 0, options: .beginFromCurrentState, animations: {
// Animation here
})