Related
I have a UI test suite that I am trying to run on device. But XCode always reports an error
Things I have already tried:
Clean and build
Clean and clear derived data and build
Uninstall the app from device
Restart the XCode
Restart the mac
Is anyone is also having such issue? Please help.
Restarting the device helped me.
I faced the same problem.Then i followed the below steps.
1.clean xcode
2.delete derived data
3.switch off and on iphone.
4.Build & Test it.
It worked for me.
I had the same problem and I have a little faster solution:
Hold power button till shutdown bar appears, then hold main front button (approx. 10s - till shutdown bar disappears). It should clear iPhone RAM.
I am trying to run a app on multiple simulators. I did manage to run 2 simulators see link Xcode6: Run two instances of the simulator.
I can run other apps on the two simulators. I did manage to run this app on the two simulators in the past.
For some reason when I try to run a second simulator there is a pause I can see IOS system log trying to open the it just closes.
I searched the IOS Log file found that both simulators have the same data (unhelpfull). I would appreciate it if someone can just point me in a direction where to start searching for the problem?
My Mac memory is fine do not have to few. The start file is also not have anything I can see that might cause this problem.
Thanks in advance.
My problem was localisation that is why the add did not run on default english setting. The add worked correctly throw Xcode because the Sceme helped set the language.
In Xcode 6.3, I got this error when trying to run an iOS project written in Swift on a real device.
App installation failed
could not write to the device.
I tried to clean the project and run again, but the same error occurs.
How can I fix this error?
Deleting the app on the device and running the project again works for me.
I did a Clean and installed my app successfully.
Product->Clean(Shift-Cmd-K)
I turned off the device and turned it on again after which I did not get such error.
OK, few things you should consider that could guide us to the problem, please check and post the answers:
is your project using capabilities? are they set correctly (should be all green)
did you try with a different project (something really simple)?
are you able to install apps from the App Store?
did you check the amount of free space left in the device?
if not, another suggestion will be using exception breakpoint, there is someone that posted an explanation how to setup it, do it and post the logs
App installation failed
I hope it helps you
Got this problem twice in one week on complete different devices.
One device had no more storage left, after deleting some apps the project installed perfectly.
The other device was fixed after rebooting the device
If you are using a free developer account you may need to uninstall some other apps you have signed.
For me it was the provisioning profile - I used distribution instead of development
My issue was an embedded framework.
Go to "Build Phases" -> "Embed Frameworks" -> Check "Copy only when installing", and it got rid of the issue for me.
For me the following did not work on iOS 11 beta 10, XCode 9 beta 6:
Restart the device
Deleting the app from the device
No symlinks were in the project
There was plenty of storage available
Deleted Derived Data and voilá, it worked again
in my project this problem happened because there was a folder with symbolic link. I removed that folder and it worked properly.
This error has many potential root causes, as can be seen by the large variety of suggested answers. The best approach to troubleshooting app installation issues like this one is usually to inspect the console of the iOS device itself, as that'll often provide much more specific error messages. In Xcode open the 'Devices and Simulators' window and take a peek at the logs of the device where your app is being installed.
In my case, the "Could not write to the device" error was being caused by this:
Feb 27 10:54:58 iPhone-7-110 installd(MobileSystemServices)[46] : 0x16f92f000 -[MIBundle _validateWithError:]: 38: Failed to load Info.plist from bundle at path /private/var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.ebmR6U/extracted/SampleApp.app/Frameworks/SomeFramework.framework
Which clearly hints at what's actually going on. I had forgotten to set an Info.plist file for my dynamic framework target (used by the app).
I had a symlink in my project to a file outside of the project. When I deleted this symlink the install worked fine.
I was having the same error, i just deleted the project and fixed!
Go to Window -> Project and right click, and remove from projects!
In the case of your device have an app with the same bundle identifier, Xcode will throw this error.
Try to delete potential app with the same bundle identifier.
Check your provision profile, maybe you are using the app store provision profile like me. I had to change the app store provision profile to development, now it's working.
Tried all of the above answers: Deleting the app, clearing storage space, cleaning the project...
What finally worked was bumping the build number in info.plist (General > Build)
For anyone still facing this Issue:
There are so many reasons and this is one of them as it happened to me.
I've faced the same problem and I was connected wirelessly and If you are trying to install the application in wireless connecting mode (connected through same network), this might probably because of poor internet connection. Check your internet connection and try again, it works fine...
Get rid of embedded libraries, dont' just throw it in there make sure it is embedded indeed.
If you use your iPhone for debug, maybe, because your iPhone's storage space is less than your debug App.
Clean your iPhone --- Real machine
Clean your Mac --- Simulator
This looks like another time waster courtesy of Apple's amazingly high class development team. On iOS11 Xcode9 (pick your beta, any one works) this will happen randomly. Appears to be more frequent if you dare to switch apps while compiling. Just build again and stare at xcode - it'll work the second time without fail in my experience.
Apparently this message can also appear if the system clock of device where the app is being installed is too far away from the current time.
I was doing some tests with date formatters by changing my iPhone's system clock and eventually forgot to reset it to the current time. Afterwards it always displayed the same message ("could not write to the device.") whenever I attempted to run the app. Simply resetting the clock in Settings fixed the issue.
Nothing helped me. I followed the below steps,
Clean derived data folder
Quit Xcode and disconnect device
Restart Macbook
Restart Device
Open Xcode
Clean and run the project
Finally I got it working!!
I am facing same issue then solved out follow this step and now its working.
Deleting the app from the device
Try to install another application
Remove derived data in X-code.
Restart X-Code then clean and build the project then run.
It's still not working then
Remove un-used application
Restart the device and check the Available and capacity in settings
Again app run in device
I hope its worked, enjoy it.
My problem was I had initially installed the app using a different set of developer credentials on the device. Deleting the app from the device fixed it.
Maybe it can be due to the following error App installation failed. No code signature found. In my case after a project clean the description of the error switched to "No code signature found".
In my case I created two frameworks but they had the same bundle identifier.
This caused the installation to fail, so double check the frameworks bundle identifiers and make sure that each of them have a unique bundle identifier.
Environment: Xcode 10
sometime this error occurs due to wrong certificate.Please make sure your certificate.
Also this the error shown if your machine running Xcode is low on space.
Once I had to load an App Container for debugging purposes into an iPad, said operation failed because the container was too big (18 GB) for this device (16 GB minus the OS), so that I desisted the task and completly forgot about it, leaving the failed installation in the device. Later, when trying to install a different application this error appeared, once I got rid of the failed app installation, everything got back to normal.
Basically, your Ipad might be low in storage.
One reason this can happen is if your app bundle contains broken symlinks.
I'm having trouble with the iOS simulator. I'm currently on 10.7 and was using the simulator to test my website. During the testing, I switched the iOS version via the tool bar, and the application froze and quit. Upon restarting, I get the following error message, with a finder window, inviting me to choose an application:
"ios Simulator Could Not Find The Application To Simulate"
Here's what I've tried to fix the issue:
1: Attempt to identify the application it needs, but the only thing i could see to open was a printer app and the ios simulator app, which just results in a "only one iOS simulator can run at a time" error message.
2: Restart the Mac.
3: Download the new Xcode tools from the app store.
4: Restart again.
None of this has helped, and I'm really stuck without it at the moment. If anyone knows how to resolve the problem, I would be grateful to hear any suggestions. Thanks.
Give this a shot.
Open up a new shell, and shoot of this command: sudo <Xcode>/Library/uninstall-devtools --mode=all (assuming thats the location of the instal).
Then run the Xcode installer you got from the app store.
This removes all the plist files that were also installed with xcode, which aren't removed when you simply reinstall. This is as close as you can come to a complete xcode refresh without reinstalling your OS.
Here's an alternative solution that worked for me... the answer selected here did not. I created a blank, "hello world" project and simply ran it. When you run the app, it sends the app to the simulator and voila! iOS Simulator has an app to simulate. From that point forward, you should be able to open the iOS Simulator without a problem.
After a while longer trying various things, it seems like I may have fixed it.
When asking for an application to open, I opened Xcode, and (weirdly) that opened up and left the testing shell visible, with the tool bar intact. I then selected the current version from the device options and hit the home button, and suddenly everything appeared.
Weird thing to have suddenly happened, but there you go.
I still can't test in iOS 3, so that's a bit of a problem, but not a disaster either!
I was testing my app on the simulator when it crashed on clicking a button of a UIAlertView. I stopped debugging there, made some changes to the code and built the app again. Now when I run the application, I get this error in the console
Couldn't register com.myApp.debug with the bootstrap server. Error: unknown error code.
This generally means that another instance of this process was already running or is hung in the debugger.Program received signal: “SIGABRT”.
I tried removing the app from the simulator, doing a clean build but I still get this error when I try to run the app.
What should I do to be able to run the app on my simulator again?
status: this has been seen as recently as Mac OS 10.8 and Xcode 4.4.
tl;dr: This can occur in two contexts: when running on the device and when running on the simulator. When running on the device, disconnecting and reconnecting the device seems to fix things.
Mike Ash suggested
launchctl list|grep UIKitApplication|awk '{print $3}'|xargs launchctl remove
This doesn't work all the time. In fact, it's never worked for me but it clearly works in some cases. Just don't know which cases. So it's worth trying.
Otherwise, the only known way to fix this is to restart the user launchd. Rebooting will do that but there is a less drastic/faster way. You'll need to create another admin user, but you only have to do that once. When things wedge, log out as yourself, log in as that user, and kill the launchd that belongs to your main user, e.g.,
sudo kill -9 `ps aux | egrep 'user_id .*[0-9] /sbin/launchd' | awk '{print $2}'`
substituting your main user name for user_id. Logging in again as your normal user gets you back to a sane state. Kinda painful, but less so than a full reboot.
details:
This has started happening more often with Lion/Xcode 4.2. (Personally, I never saw it before that combination.)
The bug seems to be in launchd, which inherits the app process as a child when the debugger stops debugging it without killing it. This is usually signaled by the app becoming a zombie, having a process status of Z in ps.
The core issue appears to be in the bootstrap name server which is implemented in launchd. This (to the extent I understand it) maps app ids to mach ports. When the bug is triggered, the app dies but doesn't get cleaned out of the bootstrap server's name server map and as result, the bootstrap server refuses to allow another instance of the app to be registered under the same name.
It was hoped (see the comments) that forcing launchd to wait() for the zombie would fix things but it doesn't. It's not the zombie status that's the core problem (which is why some zombies are benign) but the bootstrap name server and there's no known way to clear this short of killing launchd.
It looks like the bug is triggered by something bad between Xcode, gdb, and the user launchd. I just repeated the wedge by running an app in the iphone simulator, having it stopped within gdb, and then doing a build and run to the ipad simulator. It seems to be sensitive to switching simulators (iOS 4.3/iOS 5, iPad/iPhone). It doesn't happen all the time but fairly frequently when I'm switching simulators a lot.
Killing launchd while you're logged in will screw up your session. Logging out and logging back in doesn't kill the user launchd; OS X keeps the existing process around. A reboot will fix things, but that's painful. The instructions above are faster.
I've submitted a bug to Apple, FWIW. rdar://10330930
Try quitting and restarting the simulator? If "worse comes to worst" you can always try restarting: in my experience this should fix it.
I find I have started having this issue with Lion + Xcode 4.2. I have also experienced the issue in Xcode 4.3.
I have tried all the suggestions but none of them have worked other than a full reboot.
Here is how you determine if you require a reboot quickly.
List out all your Zombie processes:
ps -el | grep 'Z'
If you see your app listed as a Zombie process you will need to reboot your machine. The error message states "This generally means that another instance of this process was already running or is hung in the debugger". Well, Xcode is detecting this Zombie process which you can't kill. The only way you can then fix it is with a system reboot. :(
EDIT, 20120823: I have some better knowledge of Zombie processes so I wanted to update this answer. A Zombie process is created when a parent process does not call wait() (wait for process to change state) on a terminating child process. You can't run 'kill' directly on a Zombie process but if you kill the parent process, the zombie child process will be 'reaped' and removed from the process table.
I haven't seen this issue in a long while so haven't inspected to see what the parent process is in this scenario. The alternative to killing the parent process is to reboot your system. :)
I just had this happen to me: I was getting the error only on my device and the simulator was working fine. I ended up having to reset my device and the error went away.
I'm having this problem very often recently. What would prevent this from occurring? Logging out and in fixes the problem but.. it's annoying to do so every so often.
EDIT:
I just found the cause. I had a bug in ApplicationWillTerminate method. So when i click stop button on Xcode window, app couldn't properly terminate and started to hang.
check Activity Monitor to see if your app is on the list. force quit if possible.
If you find your problem is due to zombie processes: ps -el | grep 'Z'
(as in the earlier comment https://stackoverflow.com/a/8104400/464289) and just want to fix the problem immediately, you can do so without rebooting or killing anything. Just rename your project target executable:
Click on the project on the left-hand pane
Select Build Settings in the middle pane
Under 'Packaging' change 'Product Name' from $(TARGET_NAME) to $(TARGET_NAME).1
Easy!
Well, no answers but at least one more test to make. Open Terminal and run this command: "ps-Ael | grep Z". If you get two entries, one "(clang)" and the other your app or company name, you're hosed - reboot.
If you are a developer, enter a short bug and tell Apple how absolutely annoying having to reboot is, and mention they can dup this bug to "rdar://10401934" which I just entered.
David
Resetting the iOS Simulator fixed the error for me. Although this will remove all of the Apps you have in Simulator, it fixes the problem without having to restart the machine.
You can reset your iOS Simulator by doing the following:
1) Go to the "iOS Simulator" menu, next to the Apple () logo on the far left of your main screen.
2) Select "Reset Content and Settings...".
3) Read the pop message and if you agree click "Reset" otherwise, click "Don't Reset".
Close simulator
Stop the app from running in xCode.
Open Activity Monitor and search for a process running with your App NAME.
Kill this process in Activity Monitor
Rebuild your project and you should be all set
I had a recursive setter that blew through the stack and killed my app in such a way that I had to power boot my iPad. It was provable with a fix in the code.
I had the problem #jyap mentions with zombie processes. The only way to clear them was to reboot. However, I noticed that my friends working on the same project would get the same issue but could kill the simulator without creating a zombie process. I completely uninstalled Xcode and re-installed it, and while I still get the error, it doesn't create zombie processes, so I don't have to reboot.
Before I did that, I was using this really ugly workaround: change your app ID and run again. You end up with junk copies of the app in the simulator, but you can put off rebooting for a while.
This error happens a lot to me, almost every time I test the app in the Simulator, forcing me to restart.
Here's a workaround if you want to get some work done:
Click your project in the Project navigator
Go Target -> Info
Add a key for Application does not run in background and set to YES.
This will mean that when you press the home button in the simulator or quit the simulator, the app doesn't hang.
Don't forget to change this setting back before distribution! Put it on your release checklist :)
If this happens when testing on the iPhone. Just restart the phone. From what I have been told the phone or simulator still believes there is an instance of the app running, so when it was last run it had not terminated correctly do to either an error in your code or the phone/simulator just wanted to have a moan.
I got this error while debugging my app on an iPhone 4. Hard rebooting the iPhone solved my problem. (Powering off the iPhone hung...)
I did not have any zombie process on my mac and rebooting the mac did not solve the problem.
Maybe this bug can manifest itself on both the simulator and actual devices???
Restarted the Device, Worked! :D
Thanks Everyone for the great suggestions.
I just had this error. I tried restarting the simulator and Xcode but my project would only work again after a clean and build. No idea what caused it.
I had same problem and solved it by doing the following
Deleting the app from the device,
Disconnecting the device from Mac,
Turning the device off and back on,
Quitting and relaunching Xcode,
Quitting Instruments,
Finally, Clean and Build again.
I also did one more thing, because Xcode is configured to use iOS 5.0 and my project uses iOS 4.3
Remove all frameworks and add them again.
Alternate workaround:
Give your app a new identifier. If it's called com.foobar.myapp, call it com.foobar.myapp01
You lose all data in the app as it's actually a new app running as far as the iPhone simulator is concerned. This may or may not be more annoying than rebooting - just wanted to add it to the list.
The Cause
Running your app in the Simulator before the previously running app has completely stopped.
The Fix
Wait until you see the Stop button become active again before running again.
(I'm using Xcode 4.2.1. This problem happened very frequently when I upgraded to OS X Lion).
Fixed by rebooting my phone after deleting the app, then rebuilding it clean and running again. Works fine now.
Weird.
No rebuild or reinstall needed for my issue, and in my case the error appeared when trying to run the app on the iPhone. Simulator worked fine.
Solution: Delete app off phone, do a cold restart of phone and now all is well.
Happened a lot for me with Xcode 4.2.1 on Lion. Updated to 4.3.2 and it doesnt happen anymore. Glad they fixed it.
Mike Ash posted a solution (god bless him!) that doesn't require a reboot. Just run:
launchctl list|grep UIKitApplication|awk '{print $3}'|xargs launchctl remove
The above command lists out all launchd jobs, searches for one with
UIKitApplication in the name (which will be the job corresponding to
your app that's improperly sticking around), extracts the name, and
tells launchd to get rid of that job.
I think this is caused by force-quitting your app on the iPhone prior to pressing the stop button in Xcode. Sometimes when you press the stop button in Xcode, then it takes extra time to quit the app if it hung. But just be patient, it will eventually quit most of the time.
You may alloc variable in function or tab. It will dealloc if your function or tab is quit.
So you must declarate it member variable or global variable.
I was getting this error all the time until I stopped trusting the "Stop" button in the Run dialog box. Now that I always hit stop in the toolbar before trying to run, I have yet to encounter any zombie processes.
Oh my - I tried EVERYTHING listed above and in other posts. Re-installed Xcode, rebooted my machine, copied all the missing files into the right folders... Eventually I backed-up my iphone, wiped it and restored it, and it worked!
I think what may have been the cause from reading in and around this was disconnecting my iphone white it was running with performance tools catching leaks. Or some such thing.
Aaaah, big sigh of relief.
In most worst condition Reset content and setting of iOS Simulater, and most of the time in my case, quitting XCode along with simulator, always work works for me with XCode4.6 (that frequently get hanged)
I faced this kind of issue once in my case here's what i did
Delete the app from simulator.
Delete the derived data folder.
Perform a clean action in the project by selecting the product menu - clean
Reset the simulator.
Quit Xcode.
Try running the project now if its working fine else go to step 7
Repeat all steps from 1 to 5 and then restart your machine.
In most of the cases i got it running at step 6 extreme cases i had to restart my machine.
This error used to occur in older versions of the iOS Simulator because older instances of a job in another device that was shutting down could collide with the new instance.
iOS 6.0 and later should not experience issues like this because iOS 6.0 introduced the usage of bootstrap subsets, and iOS 7.0 introduced the usage of a dedicated bootstrap server (launchd_sim) which is completely isolated from the host's bootstrap server.