I'm trying use epoch time dates in my series data. The array looks like this:
data:[ [1324857600,205.4],[1324771200,208.7],[1324684800,205.4]. . .]
The points display fine, but the date labels on the x-axis and tooltip are all set to 16 Jan 1970 (the beginning of epoch time!).
If I do a bunch of string-fu I can produce an array that looks like this:
data:[ [Date.UTC(2011, 11, 26),247.7],[Date.UTC(2011, 11, 25),245.5] . . .]
When I do it this way the date labels on the x-axis are correct.
I've tried using the dateTimeLabelFormat option and it formats the date correctly - it's just that when I try to use millisecond values all I get is 16 Jan 70.
Any ideas? I'd rather work with milliseconds than jump through all the hoops to produce "Date.UTC(2011, 11, 26)."
Thanks!
Found the answer on the Highsoft forum.
I need to multiply the epoch time values by 1000 to get the proper millisecond values for Highcharts.
Works great!
Related
I have two columns:
Projected End Time
Actual End Time
Projected End Time-Actual End Time gives the difference. E.g.
=SUM(K3-J3) -where K3 is Actual End Time and J3 is Projected End Time
So, for example,
3:50 PM | 3:55 PM - the difference shows as 0:05 - which is correct.
But on the other hand,
3:50 PM | 3:45 PM - the difference shows as 23:55. What I want is the savings, i.e., +0:05 mins. How can I fix this?
I made some tests, you can test if this formula works for you. If you have any issues let me know.
The test table I made is:
And the formula is:
=if(SUM(K3-J3)<0,"+"&TEXT(ABS(SUM(K3-J3)),"h:mm"),TEXT(ABS(SUM(K3-J3)),"h:mm"))
So the result look like this:
I basically use an if statement to separate the negative results and the positive ones. If the value is negative like in the case of:
= (3:45: PM - 3:50: PM) it will take the absolute value of it, and concatenate the “+” symbol with the result of = (3:45: PM - 3:50: PM). However, to get the right format of the result, I use the text formula.
If the number is higher than “0” or “0” then it will use the normal formula, and add the correct format using Text.
I am recording my time spent on a project in google excel sheet. There is a column which does addition of the recorded time and output total time to column say D40. The output time looks like <hoursspent>:<minutesspent>:<secondsspend>. For example 30:30:50 would mean that i have worked for 30 hours and 30 minutes and 50 seconds on a project.
Now, I was using this formula to calculate my total invoice
=(C41*HOUR(D40))+(C41*((Minute(D40)/60)))+(C41*((SECOND(D40)/3600)))
Where C41 cell contains my hourly rate (say $50).
This is working fine as long as the numbers of hours that i have worked are less than 24. The moment my numer of hours go above 24. The Hour function return the modulus value i.e., HOUR(30) would return 6.
How can I make this calculation generic in a way that it oculd calculate on more than 24 hours value too.
Try
=C41*D40*24
and change formet on the result as $
one hour is part of a day, as you know 1/24th of a day, that's why you could multiply by 24 to get hours, and then multiply it by the rate
Try below formula-
=SUMPRODUCT(SPLIT(D40,":"),{C41,C41/60,C41/3600})
When you store a value as HH:mm:ss into an Excel sheet, it automatically formats it as a Time, so it makes sense that HOUR modulos by 24.
Which is why you can simply ignore it. If you have a cell that is formatted as currency (FORMAT > Math > Currency) or any other normal Number-like format, then you can see, if you perform a numerical operation like multiplication, that it stores times like "30:30:50" as if it were a TIMEVALUE with a value over 1. Simply multiply that by 24, and then by your hourly rate, and you'll get your value, i.e,
=D40 * C41 * 24 :
Just replace HOUR(D40) with INT(D40)*24+HOUR(D40)
Time started time end Duration
6:02:53 PM 6:11:07 PM 0:08:13
6:11:22 PM 6:20:33 PM 0:09:11
6:20:48 PM 6:32:21 PM 0:11:34
6:32:44 PM 6:39:04 PM 0:06:20
6:39:28 PM 7:00:41 PM 0:21:13
7:01:00 PM 7:09:16 PM 0:08:16
7:09:40 PM 7:16:03 PM 0:06:23
7:16:03 PM 7:24:21 PM 0:08:17
7:24:45 PM 7:30:57 PM 0:06:12
7:31:27 PM 7:37:21 PM 0:05:54
7:37:21 PM 7:44:06 PM 0:06:45
I want sum of all duration entries in x hours x minutes x seconds like i have more then 1000 rows of duration when i try to use =SUM(C2:C100) I am not getting sum of total duration after sum of 24:00:00 24 hours it starts from 00:00:00
for example sum of total duration gets 24:00:00 between range of c1:c8 it will start from 00:00:00 from c9: next range kindly assist me how to overcome this issue
try:
=ARRAYFORMULA(TEXT(SUM(IFERROR(TIMEVALUE(C:C))), "[h]:mm:ss"))
spreadsheet demo
Wherever you put the =SUM(), Select that cell and do Format>Number>More Formats>Custom Number formatting, and put the same formatting that Player0 put in his answer:
What worked for me to resolve a similar problem was a suggestion by user ttarchala in Google Sheets Query multi condition sum of time duration.
I used N() function as he said, and my final formula for the duration is:
=IF(To<>"", N(To-From+(To<From))*24, "")
with To and From being Named ranges for End Time and Start Time respectively.
N() function converts the time delta into a number. Multiplied by 24, this gives the hours in decimal format, such as 2 hours 30 minutes = 2.5 hours.
From there on, there is no problem with using the built-in Sum function to calculate the total duration as a decimal. Such as, the total duration of 27 hrs 10 minutes is shown as 27.16. This sufficed for my purposes.
Time delta is calculated using a formula from https://webapps.stackexchange.com/questions/104829/calculate-time-difference-between-times-past-midnight to take into account past-midnight differences.
And the first condition, To<>"", makes sure the formula is not showing in empty cells. As soon as the End Time is filled into "To" column, the decimal duration is calculated. Then it can be used in the regular Sum function.
This seemed shorter and easier than the formulas suggested above so I am sharing it in the hopes it may help someone else. Using thus formula, I just added up the Sum of time I spent looking for this solution: 3.34 hours :)
It's a formatting problem. You formatted your reply as HH:MM:SS, therefore the number displayed is not showing the date, which would have been incremented by one. If you multiply your sum by 24, and then format the result as a pure number, you will get a number that goes above 24, and will show you the number of hours, and its decimals. If you use those hours in further calculations, the result will be correct.
In cell C1, use the formula
=IF((B1-A1)>=0, B1-A1, 1+B1-A1)
Explanation: the problem is durations that exceed the 24 hour limit, as you say.
Google Sheets has become a bit deceptive here, as it will show the correct duration for the individual time interval, but if you SUM over it, it will actually deduct the value!
A B C
23:39 1:10 1:31
When you SUM then Google Sheets will see the value in cell C1 as if it was the beginning of the same day as the time in A1. So when you in C1 do =B1-A1 then it will register as a negative duration! But it won't show up as that!
In C1 use this formula, =IF((B1-A1)>=0, B1-A1, 1+B1-A1) for individual cells in column C, when you see that cells in column B has exceeded the 24-hour limit once. The duration in C1 should still show 1:31, but now the result when doing SUM over a range of cells in column C, like =SUM(C1:C2), will now show the correct and strictly additive sum. You can safely copy this formula to all cells in column C.
PS: cells in all of the columns can have Automatic or no formatting (which I think defaults to Automatic), if your time inputs look like the above. So you don't need to format all of those cells to Time or Duration. BUT remember to format the SUM cell to Format -> Number -> Duration.
PPS: if you are manually inputting the times (for for instance time tracking), then the easiest way to keep the much simpler =B1-A1 formula is to split the time up into two rows, like this:
A B C
23:39 0:00 0:21
0:00 1:10 1:10
Then the SUM of cells in column C still becomes 1:31.
I'm trying to display a simple tableview in IOS with data from Sqlite. My database date is stored as a timestamp. I thought was an unix timestamps but if i try to use dateWithTimeIntervalSince1970 i've really strange result.
Examples of date rows stored:
1352208510267
1352208512266
1352208514266
1352208516266
1352208530266
1352208532265
Use a query like this
SELECT datetime(timestamp, 'unixepoch') from YOURTABLENAME
WHERE id = someId;
This should convert it to some readable value.
Have a look here
I found the answer here. I compared the results with the previous answers:
SELECT strftime('%Y-%m-%d %H:%M:%S', datetime(ZDATE+978307200, 'unixepoch', 'localtime')), datetime(ZDATE, 'unixepoch', 'localtime') FROM ZTABLE
The query with the adjustment for Apple's epoch (Jan 1 2001) gives me the correct date:
"2015-09-29 20:50:51", "1984-09-28 20:50:51"
"2015-09-29 21:03:10", "1984-09-28 21:03:10"
"2015-09-29 21:25:30", "1984-09-28 21:25:30"
Unix timestamps are defined as the number of seconds since Jan 1 1970.
Just now, this would be about 1365525702.
Your values are one thousand times larger, i.e., they are measured in milliseconds.
Decide whether you actually need the millisecond precision, and then add * 1000 or / 1000 at the appropriate places.
I'm working with google annotated time line graphs: http://code.google.com/apis/visualization/documentation/gallery/annotatedtimeline.html
My question is: I would like to limit the X-axis to show just a range of hours between 5:00 and 21:00. Today I'm showing already per hour but I would like to limit the range and not show 24 hours. Is it possible?
Can't you just set the zoomStartTime and zoomEndTime to configure the part of the x axis that is shown?
Something like the following might do it, ie set the start and end date/times and also turn off the range and zoom functions.
annotatedtimeline.draw(data, {
'displayRangeSelector' : false,
'displayZoomButtons': false,
'zoomStartTime': new Date(2009, 1 ,2),
'zoomEndTime': new Date(2009, 1 ,5)});
Just a thought after looking here.