I've recently started teaching myself Ruby on Rails, and it's all going well except I'm looking to completely reinstall Ruby, Rails and Gem.
I think I got a bit too excited at some point and deleted/modified some files or folders I shouldn't have, so I just want to get my system back to its original state so that I can reinstall the necessary Ruby, Rails and Gem bits.
I've read in places that I can install something called rvm to do this, but right now I just want to keep my system as simple as possible so that my understanding can keep up.
Any help would be appreciated.
Many thanks.
You list all the gems which are installed in your user account, with:
gem list
You can then delete any of the gems, by doing this:
gem uninstall GemName
... until gem list doesn't show any installed gems.
After that, everything should be as good as new.
I would highly recommend to install RVM, because it will help you not to get into the same situation in the future. With RVM you can create "gemsets" to keep the gems for each project separate from other projects.
With RVM you can also install different versions of Ruby, such as the newer Ruby 1.9.2
Check it out! It's really not difficult to install
http://beginrescueend.com/
Check these RailsCasts:
http://railscasts.com/episodes/200-rails-3-beta-and-rvm
http://railscasts.com/episodes/201-bundler
If you are on Max OSX 10.5 and up, Ruby and RubyGems is installed with Developer Tools.
On older versions you could uninstall by running this command:
$ sudo perl /Developer/Tools/uninstall-devtools.pl
Then you just need to reboot your computer and install Developer Tools again. After that if you want to use RVM follow the instructions here. There are also some OSX specific options you should go over as well.
You could follow the instructions on the RoR site - the download page also includes instructions. Another option is this one click installer from the Ruby OS X project on SourceForge.
If you have a TimeMachine backup available, you could also choose to restore your deleted files instead of reinstalling.
The simplest way is to use rvm to do this. The advantage to this is that everything's installed in a manner that's specifically isolated from the system.
Using the OS or MacPorts/Homebrew provided Ruby is a great way to get going, but it doesn't scale. For the long-haul, it's best to use rvm because it is easier to stay up to date, to install different versions of Ruby, and to switch back and forth with a minimum of pain.
Plus, if you really get sideways you can always rvm implode and start over, which when combined with bundler will make life pretty easy.
Related
I've read through a few Q&A's here on this subject, but am still confused. I'm new to linux and new to programming, so please keep that in mind.
I understand that Ruby Gems is similar to apt-get. It's a package manager -- correct?
So if I want to install or remove gems, I can do it via a command like: sudo gems install {gem name}
So what then is RVM? Why would I want to use it? Doesn't Ruby Gems do what RVM does? Why then does Ruby Gems get installed with RVM?
Also, when specifying gems in a project's Gemfile, then using bundler to update, etc.. is this downloading the gems only to that project, or will they now be available across all projects?
Also, what is $PATH about? I don't know much about it, so when I read about it, I'm confused about what is the right $PATH, what if anything I should do to manage references in $PATH, etc. Can someone explain or point to any resources for beginners?
And finally, I'm using various tutorials, and they differ on versions for everything from Ruby to Rails to Gems. a) Should I be modifying my environment to match the version that they use? b) Once I'm done with a tutorial, should I leave all the versions alone, or should I try to upgrade everything up to the latest and greatest?
It's confusing because if I leave everything at the version levels in the tutorials, then I feel like I'm stuck in the past. While if I upgrade to the latest and greatest, I feel like things have all switched around on me and I'm not sure how to use all the tips and tricks I learned.
Thank you in advance for taking the time to help. Cheers.
This question is very broad so I chose to try to balance the explicitness with conciseness. If anyone finds anything wrong with the answer please tell and I'll straight up own up to it :)
RVM is a Ruby Version Manager. Hypothetically, some projects might require you to run ruby 1.9, another legacy project might require 1.8. RVM allows you to have both installations installed side-by-side, as opposed to having one authoritative system-level version of ruby. This facilitates installing later versions of ruby without fear of breaking anything, or of meddling with other user accounts' ruby version requirements (since usually one installs RVM at the user level, in your home directory). This even lets you try out the bleeding edge version of ruby without having anything to worry about, since you can always switch back easily.
When you install a gem, it generally becomes available to you everywhere that ruby installation is available to you, so in any project. When you specify gems in your Gemfile you're basically saying that independently of whatever gems you may have installed and their versions, that project requires gem x of version 2.2, y of version 3.1, and z of version 1.1. If you didn't already have those gems it installs them, if you did but not those versions, it installs them.
Path is an environment variable that allows operating systems to know where to look for programs when you invoke them. If you type someapp in the terminal, how can the operating system possibly know where someapp is? Well it searches for it in any of those directories supplied in $PATH. You can see what's in your path by doing echo $PATH in the shell.
As for varying versions of ruby, this brings me back to the reason for RVM. You can if you want install the version of ruby they use, and then in your Gemfile specifically state the version of the gems the tutorials use and you should be fine. You can have different versions of gems installed, and you can have different versions of ruby installed thanks to RVM.
Personally I would recommend working towards the latest version of everything so that it remains relevant. For example, it would be counterproductive to work on a tutorial that uses Rails 2 since it changed a lot when it went to 3, and somewhat from 3 to 3.1 and above etc. If possible use the latest versions, or at least be aware of the nuances (the base material tends to stay more or less the same), lest you work on a tutorial that is older only to get to work on your own project with the latest version of everything and not have it work.
Simple solution to your dilemma: ditch the tutorials that are too old. There are tons of resources out there that you're bound to find up-to-date material. Worst case, dated material typically has community support in form of comments which state the changes between the dated version of something and its corresponding recent version. E.g. "keep in mind that haha.what changed to lol.wut in version 3.1"
I can understand that this is confusing, RubyGems are as you write a package manager. RVM is a tool that makes it possible to have several versions of ruby installed on your system and easy swift between them.
If you using various tutorials, and they differ on versions for everything from Ruby to Rails to Gems you can (if you want to) create a RVM Gemset for the version you use. You will then create a sandbox for the Gems Bundler use in your project.
Bundler are as you write a tool for manage the Gems your application depends on. In the old days before Bundler it could be a hassle to figure out which gems your application depended on. Now Bundler do this for you.
Both Bundler and RVM are tools that is not absolutly necessary to use but they will help you. I personally do not use RVM anymore. It is to much of a monster in my taste so I use rbenv instead.
Regarding what versions of Rails to use I do agree that you should try to use 3.1 versions if possible but if you find some example application using Rails 3.0 you do not need to upgrade it. Also you do not need to run the absolute latest version of Rails. Rails 3.1 have a lot of bug fixes that the latest Rails 3.1.3 might not have.
So I was following the steps on Hivelogic to get ruby on rails setup on my machine. After compiling and installing, I used the which ruby command to double check it installed in the right place. It did not. I was able to install the Rails and MySQL gems though, but both POW and localhost:3000 don't work.
Is there anything wrong with having it in the usr/bin directory instead of usr/local/bin? My usr/local/bin is practically empty, but usr/bin has a ton of files in it.
Edit: I reinstalled ruby to usr/local/bin but now Rails won't install. Is it a problem that it's already installed in usr/bin?
That page is a few years old. The current best practice for Mac and Linux is to use rvm. You can see, even Hivelogic uses rvm now (though I'm not sure how I feel about installing it system wide).
Anything that recommends installing from source as the first option instead of a last-resort fallback is probably bad advice. It's better to install using a package manager like MacPorts or Homebrew both of which have current versions of Ruby 1.8 and 1.9.
MacPorts installs everything in /opt specifically to avoid conflict with system files. From time to time Apple will distribute an update that patches ruby and this can mess up anything you have in the way of dependencies if you've been using a modified /usr/bin/ruby. Generally the system ruby is supposed to be left as-is.
You can replace the "compile ruby" step with an installer like that and save yourself a lot of trouble in the future. Just be sure to have /opt/local/bin as one of the first items in your PATH just as you would for other solutions.
Since installing Ruby and Rails and some kind of database can be a confusing process, it seems like there should be a meta-installer to help you through the process.
So I finally managed to get rails installed in the correct spot. I had to change the line in my .profile to export PATH="/usr/local/bin:$PATH" and then do a sudo gem update --system after installing rubygems before rails could actually be installed.
RVM and Homebrew did not help at all.
EDIT: Since people have a problem with this answer, I'm giving an update. I have since installed RVM and am liking it, but only because I have a friend I ask all my questions to, as RVM is really confusing if you're not used to doing a lot on the command line. I needed help from him to install it because I didn't have any of the bash files, and thought they were hiding somewhere. If you're missing the bash files, just create them yourself. This took a long time to get working, but now I apparently have it setup right.
I seem to be having issues with gems and want to start with a fresh install. Is this possible without re-installing Snow Leopard from scratch?
The easiest solution will be to check out rvm. It lets you have multiple Ruby environments (each with their own set of gems) installed in parallel, which makes it easy to "start fresh" and built the environment from the ground up.
Yes. You can forget all about the gems on your system's Ruby and install RVM. This guide, complete with screenshots, will show you how. Then you can use gemsets to keep things organized and, if you wish, delete all your gems at any time and start over.
If you really want to uninstall before using RVM (which is indeed the recommended solution), check this blog post by Chad Wooley.
So, I upgraded Ruby to 1.8.7 to make a particular gem work. Hooray, it works now! But...now rails doesn't. I tried reinstalling rails through gem, but that hasn't helped, either. Rake is no longer recognized by my windows box as a valid command, and I can't even start the server without a whole string of errors.
My only thought is that maybe I shouldn't have copied my gems file over (a tutorial mentioned it as the only way to save my gems on windows with an upgrade). I'm gonna try reinstalling 1.8.7 without changing anything, and reinstalling everything as needed.
Edit: Okay, just plain 1.8.7 does work, but it's frustrating to have to reinstall all my gems by hand... Is there any better solution, in Windows?
You may have to uninstall the old version first or use something like RVM to manage your multiple versions. I've always run into problems trying to upgrade directly on a windows machine (rake and rails not working basically).
Edit: Looks like even with RVM you have to install gems individually for each version (a good thing), but you can also export and import gem sets. That might be your best bet, short of scripting a solution yourself.
That is normal: each ruby environment has their own set of gems. That might not seem intuitive, but i guess it has something to do with the possible differences in ruby versions and the fact that gems are "installed" and compiled if needed.
I have a script that installs all my needed gems on windows. On windows rvm does not work, but there is an alternative called pik. I have written a blogpost about this process, which also contains a small bat-file i use that will install the most commonly used gems automatically.
I'm used to the One-Click install local environments of MAMP. Is there a Ruby equivalent... a download that you run and instantly get the most current versions of Ruby, Rails, SQLite running locally?
I'm using a Mac, running Leopard, and am aware that all of the aforementioned technologies ship with Leopard (except maybe SQLite). The books that I have reference newer versions and the last thing I need is to try to retrofit a tutorial to work with my version.
And one more less important question: What are "Gems" and is that something that I need to make sure is fully updated too?
Installation is pretty confusing when you first start with Rails! Even though a lot of what you need is already installed if you are using Mac, personally I found it really hard to find come concise information on how to best go about setting things up.
Since I didn't want anyone else to go through the headaches that I had when configuring their Mac development environment, I've written a 7 step guide to installing Ruby on Rails, MySQL, Apache with PHP, and phpMyAdmin on OSX Leopard. In short, everything you should need to get developing locally on your Mac!
Here's the link:
http://waavoo.com/2009/7-step-guide-installing-ruby-on-rails-mysql-apache-php-phpmyadmin-intel-mac-os-x-leopard/
Hope that helps!
Take a look at FiveRuns Install. It's a free Ruby on Rails stack that you can download.
RubyGems is the Ruby standard for publishing and managing third party libraries. Check out the User Guide.
Have fun!
I have no idea what mac os are you in but Leopard (10.5.x) already have ruby installed, all you need is to updated the gems using
gem update rails
in your command line.
if you're on Tiger (10.4.x) the installation is broken, and please follow this link.
You should also have a look at Phusion Passenger - this, along with the prefpane, allows you to have apache VirtualHosts set up the easy way.
Current versions of Rails are designed to work (for development) without needing an AMP -style stack, by using SQLite and a small Ruby Web server, so if you will only be doing Rails development you don't need to set up a stack - you can just type "rails" and it will work.
BUT the versions of RubyGems and Rails shipped with Leopard are now outdated, though, so you'll need to upgrade these before you go too far. There's an article that I wrote on setting up a Mac for development here, but the minimum commands go like this:
sudo gem install rubygems-update
sudo update_rubygems
sudo update_rubygems (yep, twice)
sudo gem update --system
These get RubyGems up to the current release, so that you can upgrade Rails safely. To do that, type:
gem update rails
The last command doesn't have sudo, because if you omit it, current versions of RubyGems will install a clean copy of the gems into your home directory, leaving the system versions untouched.
Finally, amend the .profile file in your home directory, so that the line with PATH in it says:
export PATH=$HOME/.gem/ruby/1.8/bin:$PATH
Close up any terminal windows for this to take effect. The utilities provided by the gem packages in your home directory will now have precedence over the system versions.
This means that you can type "rails" and the latest version will run, but you haven't messed with any of the software provided by Apple (apart from the system copy of RubyGems).
To upgrade your private copy of Rails whenever a new version comes along in future it's just this again:
gem update rails
just refer this....
http://wiki.rubyonrails.org/getting-started/installation/windows#installing_ruby_on_rails_on_windows
BitNami RubyStack is exactly what you are looking for http://bitnami.org/stack/rubystack