There is probably a simple solution but I can't figure it out.
I am using storyboards for the interface.
I start with a tab bar controller, but before the user is allowed to use the app the user has to authenticate himself trough a loginview which is modally pushed at the start.
I want to configure the loginview at the same storyboard, but I can't seam to figure out how to link the view controller at the storyboard and my code.
What I have done:
Create a new UIViewController subclass trough file > new > new file.
Drag a new UIViewController in the story board
Set the class in the custom class tab
drags a UILabel for test purpose.
run
No label...
Pull on a new UIViewController that will act as the login view controller onto the MainStoryboard. In the attribute inspector change the identifier to LoginViewController (or something appropriate). Then add
- (void)viewDidAppear:(BOOL)animated
{
[super viewDidAppear:animated];
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"MainStoryboard" bundle:nil];
UIViewController *vc = [storyboard instantiateViewControllerWithIdentifier:#"LoginViewController"];
[vc setModalPresentationStyle:UIModalPresentationFullScreen];
[self presentModalViewController:vc animated:YES];
}
to the First view controller and the login screen will be loaded from your storyboard and presented.
Hope this helps.
The answer by Scott Sherwood above is most correct answer I found after lot of searching. Though very slight change as per new SDK (6.1), presentModalViewController shows deprecated.
Here is very small change to above answer.
UIStoryboard *sb = [UIStoryboard storyboardWithName:#"Storyboard" bundle:nil];
HomeViewController * hvc = [sb instantiateViewControllerWithIdentifier:#"LoginView"];
[hvc setModalPresentationStyle:UIModalPresentationFullScreen];
[self presentViewController:hvc animated:YES completion:nil];
I'm new in this field. But if the first view controller is a navigation view controller and its rootviewcontroller is a table view controller. If you want to push a view controller like the LoginViewController when you click the cell, and you also want to go back to the table view by using the navigation bar. I recommend this way:
-(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
UIStoryboard *sb = [UIStoryboard storyboardWithName:#"Main" bundle:nil];
UIViewController *controller = [sb instantiateViewControllerWithIdentifier:#"LoginViewController"];
[self.navigationController pushViewController:controller animated:YES];
}
In this way, you can have the navigation.
By the way, I don't know why this kind of problem you asked will appear. I guess when the loginviewcontroller is created in the code, its view is not the view in the storyboard. If someone know the cause, please tell me! thanks!
Related
I got a source code for an existing app. throughout the app the developer didn't use storyboard for the user interface but rather he used interface builder xib files. As a new developer, i don't know how to develop iOS apps in xcode using xib files for viewcontrollers, i learnt the storyboard way. Now I want to add more screens to the apps source code, i created a new storyboard file to define my new screens, how do I navigate to the entry point of this new storyboard from a button action i defined in one of the xib files so that i can easily implement my features.
while searching i got some suggestions like this one
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"newStoryboard_iPhone" bundle:nil];
MyNewViewController *myVC = (MyNewViewController *)[storyboard instantiateViewControllerWithIdentifier:#"myViewCont"];
but i dont think i understand how to implement this even if this can be in a button IBAction method. and besides subsequent navigations would be segues through the view controllers i define in the new storyboard
It's right suggestion.
You should get storyboard object by its name. Then you should create your viewController using [storyboard instantiateViewControllerWithIdentifier:#"..."];
Then you may navigate to your new VC using appropriate navigation method. For example:
[self.navigationController pushViewController:vc animated:YES]
ViewController identifier you should set in Interface Builder under section "Identity Inspector" in field "Storyboard ID".
That code you should place in IBAction method. But better would be to extract it in separate method. Something like this:
- (IBAction)buttonPressed:(UIButton *)sender {
[self navigateToMyNewViewController];
}
- (void)navigateToMyNewViewController {
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"myNewStoryboard" bundle:nil];
MyNewViewController *myNewVC = (MyNewViewController *)[storyboard instantiateViewControllerWithIdentifier:#"MyNewViewController"];
[self.navigationController pushViewController:myNewVC animated:YES];
}
Navigation from MyNewViewController your can implement as you want. It may be segues.
MyNewViewController *myVC = [self.storyboard instantiateViewControllerWithIdentifier:#"YOUR_VC_NAME_HERE"];
This will instantiate your ViewController, from here you can present it like so
[self presentViewController:myVC animated:YES completion:nil]
The image shows where you set the storyboard name that you're referring to
Try This it's working for me ,
Use below line of code :
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"Main"bundle:nil];
LoginViewController *loginVC = (LoginViewController*)[storyboard instantiateViewControllerWithIdentifier:#"LoginViewController"];
[self.navigationController pushViewController:loginVC animated:YES];
We need to set storyboard id as per mention in below,
you can navigate one storyboard to another storybord:
first you import your viewcontroller class to appdelegate.h
AppDelegate *appDelegateTemp = [[UIApplication sharedApplication]delegate];
appDelegateTemp.window.rootViewController = [[UIStoryboard storyboardWithName:#"storyboard_name" bundle:[NSBundle mainBundle]] instantiateInitialViewController];
Like the way you use storyboard, use
MainViewController *mainVC = [[MainViewController alloc] initWithNibName:#"MainViewController" bundle:nil]
[self.navigationController pushViewController:mainVC animated:YES];
I added one ViewController to my project and created one class.
After I bind this class to my ViewController.
In another controller I have method:
- (IBAction)login:(id)sender {
// How here I can do redirect to controllerViewController
}
There are two ways to push view controllers in the application.
1) by Segue
2) By View controller identifier
1) By Segue :
[self performSegueWithIdentifier:"SegueIdentifier" sender:self];
2) By View controller identifier :
Yourclassname *gotoYourClass = [self.storyboard instantiateViewControllerWithIdentifier:#"ViewControllerIdentifier"];
[self.navigationController pushViewController:gotoYourClass animated:YES];
- (IBAction)login:(id)sender {
ViewController *vc = [[ViewController alloc]initWithNibName:#"ViewController" bundle:nil];
[self presentViewController:vc animated:YES completion:nil]; }
In the storyboard give your view controller an identifier (under the Attributes Inspector) then use the following code, to bring that view forward.
IF YOU WANT TO USE PUSH THEN USE THIS CODE
UIStoryboard *mainStoryboard = [UIStoryboard storyboardWithName:#"STORYBOARDNAME" bundle:nil];
UIViewController *vc = [mainStoryboard instantiateViewControllerWithIdentifier:#"VIEWCONTROLLERIDENTIFIER"];
[self.navigationController pushViewController:vc animeted:YES];
IF YOU WANT TO PRESENT THEN USE THIS CODE
UIStoryboard *mainStoryboard = [UIStoryboard storyboardWithName:#"STORYBOARDNAME" bundle:nil];
UIViewController *vc = [mainStoryboard instantiateViewControllerWithIdentifier:#"VIEWCONTROLLERIDENTIFIER"];
[self presentModalViewController:vc animated:YES];
Note: In UIViewController please enter your view controller name which you want to push into another view.
If you want to comeback to the current ViewController later then use Navigation ViewController or else just use the presentedViewController of self(your current viewController)- no going back business, like they have previously illustrated.
For a simple block of execution(demo or practice) it's all the same but for a project application it completely matters to make the correct choice.
I'm using Objective-C. I have this code in my .m file.
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath*)indexPath
{
detailViewController *detail = [[detailViewController alloc]init];
[self.navigationController pushViewController:detail animated:YES];
}
And I created my Detail View Controller Scene in storyboard. It looks like this [
And every time I run this in my simulator and tap on one of the tableview cell, it pushes the screen to a complete black screen like this:
Can someone help me? I would thank you very much!
Yes it will give a blank screen, because you haven't attached any visual interpretation on detailViewController class.
Use this method
UIStoryboard *sb = [UIStoryboard storyboardWithName:#"MainStoryboard" bundle:nil];
DetailViewController *vc = [sb instantiateViewControllerWithIdentifier:#"detailViewController"];
[self.navigationController pushViewController:vc animated:YES];
You will have to set storyboard id by clicking on view controller and set storyboard id as shown in picture
Note : for above pic replace Storyboard id "MessagingVC" with "detailViewController"
When using a storyboard, you don't want to use alloc+init to create the view controller. Instead, you need to assign a Storyboard ID in Interface Builder and then use:
[self.storyboard instantiateViewControllerWithIdentifier:my_identifier];
A better option may be to set a push segue on the table view controller. This will cause the instantiation and push to happen automatically. You can override prepareForSegue:sender: to set properties, if needed.
I have a custom UIVieController class that it's not included in any StoryBoard, I need to call from this class an UIViewController that is included in a StoryBoard, I tried many ways to do this but it doesn't work, always get a NSException because when I try to instance the UIViewController of the StoryBoard and get a nil object.
I don't know why it's happening this, I really appreciate any help with this.
Thank you.
Just to clarify in this code I omitted the pushing of the view to the UINavigationController.
I tried this.
+(void)loadSocialMediaAppSegue:(AXISAppDelegate*)delegate withName:(NSString*)segueId{
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"Main_iPhone" bundle:nil];
AXISWebViewViewController *axisWebView = [storyboard instantiateViewControllerWithIdentifier:segueId];
}
and this
+(void)loadSocialMediaAppSegue:(AXISAppDelegate*)delegate withName:(NSString*)segueId{
AXISWebViewViewController *axisWebView = [delegate.window.rootViewController.storyboard instantiateViewControllerWithIdentifier:segueId];
}
Ok the first thing you need to do is to add a identifier to you view controller at Storyboard, you can do that opening the Storyboard's Identity Inspector and fill the storyboard id field.
Now you are able to call this UIViewController from any place you want like this:
UIStoryboard *sb = [UIStoryboard storyboardWithName:#"the name of your storyboard" bundle:nil];
UIViewController *vc = [sb instantiateViewControllerWithIdentifier:#"the id of your view controller"];
I hope this can help you.
Please post the code you are using to instantiate the VC from the Storyboard.
In general:
To instantiate a View Controller from StoryBoard:
MyViewController *MyVC = [[UIStoryboard storyboardWithName:#"MainStoryboard" bundle:nil] instantiateViewControllerWithIdentifier:#"MyViewController"];
Make sure you set the Storyboard ID and Restoration ID and Class name to "MyViewController" or whatever you want to call it and use that as the parameter for instantiateViewControllerWithIdentifier:
Then if you are in a navigation controller, simply push the instantiated view controller onto the navigation stack:
[self.navigationController pushViewController:MyVC animated:YES];
or present it modally:
[self presentViewController:MyVC animated:YES completion:nil];
I am developing an app that use MFsidemenu for the swipeBar.
My app consists of a loginController which is an uiViewController and after logging it change into an uiNavigationController.
MFsidemenu need this code running on the AppDelegate:
UIStoryboard *storyboard = [UIStoryboard storyboardWithName:#"MainStoryboard" bundle:[NSBundle mainBundle]];
UINavigationController *navigationController = (UINavigationController *)self.window.rootViewController;
UIViewController *leftSideMenuViewController = [storyboard instantiateViewControllerWithIdentifier:#"leftSideMenuViewController"];
[MFSideMenu menuWithNavigationController:navigationController
leftSideMenuController:leftSideMenuViewController
rightSideMenuController:nil];
The problem is how to change the second line of the code if the initialView is an uiViewController(Login) and after that, how to pass it to the secondViewController(MainMenu) which is an uiNavigationController?
In a shortway, I want the MFSidemenu to work only on the secondController, which is the main controller. Thanks!
Updated:
solved, by SpaceDust solution below :)
Question Update:
So the example of using MFSidemenu only limited to showing a sidemenu on the controller. The example sideMenuController exiled from any other segue on the storyboard. on the sidemenu I implemented uiTableViewController to navigate to another controller. So how to change MainMenuView with sideMenuController didSelectRowAtIndexPath? I hope my english good enough to represent my situation though. Thanks once again!
You need to present your uiViewController(Login) as a modal view controller if you dont want to side menu appear during login.
Create a login viewcontroller in storyboard, give it a storyboard id lets say LoginViewController . Dont connect that viewcontroller to anything on storyboard let it sit a corner by itself.
first create a global singleton variable where you check if user is logged in
then In your navigationcontroller's rootviewcontroller
-(void)viewWillAppear:(BOOL)animated
{
//this will present the login view if user is not logged in
if (isLoggedIn==NO) {
UIStoryboard* sb = [UIStoryboard storyboardWithName:#"MainStoryboard"
bundle:nil];
LoginViewController *loginVC = [sb instantiateViewControllerWithIdentifier:#"LoginViewController"];
[self presentModalViewController:loginVC animated:YES];
}
}
in your login viewcontroller when login process is complete
change global singleton bool to isLoggedIn=YES
then dismiss your login view controller.
[self dismissViewControllerAnimated:NO];