I've developed a program in delphi with firebird 2.5 as the db. In delphi i have been closing the connection once i complete a task at every stage. For example, if i add a record, i would open a record and close the adoquery as well as the adoconnection. I came up with this idea as a solution to connection timeout problems if the switch goes down. i have noticed that both the server and nodes hang if a do this.Is this idea correct of i just have to keep the connection open. please advise
Yes - you should keep connection alive. Use cached updates and Apply/CommitUpdates method.
Second of all - try to use ie IBDAC components if you work in unstable network.
why you aren't using Transactions?
you can check at whenever if your connection is up by calling adoconnection.connected
please better explain your problem...you are facing connectivity problems during the execution and you want a solution to this? or, you want something else?
Related
I'm using Delphi XE2.
I want to know, is it possible to check if the current connection is metered or not?
I just looked in the Registry, where I found the DefaultMediaCost, but when I toggle the connection to metered nothing changed in this list.
So now I want to check the current state of my connection in the program itself, but I don't know if there is any way to do this.
The only function I found is for C# (NetworkInformation.GetInternetConnectionProfile).
We have had this error recently reported by our clients and we on't know how we can fix this. We are using Delphi XE6 to develop our application and it connect to Firebird (v2.5) database as back-end. We also have used IBObjects for working with Firebird database in Delphi.
We have managed to replicate the error on the dev machine by stopping Firebird windows service before running a query but we haven't found a way to detect the connection lost in the code (e.g. by having an event) so as we don't know when this happens so we cannot reconnect to the database in the code either.
By the way, this is full error message if it helps:
ISC ERROR CODE:335544721
ISC ERROR MESSAGE:
Unable to complete network request to host "BON-VFS-01".
Error writing data to the connection.
Any help really appreciated.
From IBOBjects FAQ
Is there a way to detect a lost connection and try to reconnect
automatically, without user action?
Hook into the OnError event and look for the ERRCODE that denotes a
lost connection. Then, you can take whatever action you deem necessary
to deal with the problem. If the connection is lost you need to do a
disconnect and then connect again.
And from one of the base members of the IBObjects:
However, perhaps the "something" you are missing is that, if the
connection is broken by an external cause, the client application has
no way to know that it is not still connected. Its first knowledge of
that fact will come the next time it tries to access the server. The
API will report "Connection lost to database" and return GDSCODE
335544741, which is identified by the constant
isc_lost_db_connection.
At the point where this exception occurs, the TIB_Connection still
thinks it is connected - the Connected property will be true. If you
try to reconnect by calling Connect, you will get an IBO exception.
It is necessary to call Disconnect. This does not simply reset a
property. The Disconnect method performs all of the necessary cleanup
to invalidate the broken transactions and cancel any now invalid
postings, datasets and caches. Once Disconnect has completed its
work, you can then place a Connect call inside a retry loop and
attempt to get going again.
I do not know of a working example, but the simplest way to deal with
this is to write a RestoreConnection handler procedure that you can
call from your IB_Session.OnError handler whenever argument ERRCODE
returns isc_lost_db_connection.
Have your RestoreConnection procedure do whatever you need to do,
trying to call Connect and handling the exception that occurs if the
request fails, until no exception occurs. Test the Connected property
after each iteration. When Connected is finally True, you are in
business. You can drop out of the retry code and inform the user that
the connection has been restored - perhaps with a sound and/or a
message in the status bar, to avoid having to show a dialog box that
she has to respond to. (if you like the idea of sound and status bar
cues, you could devise "connection lost" warning sound and status bar
message code to run at the beginning of your handler procedure as
well...)
If these broken connections are a frequent occurrence, you might like
to consider making a distinctive custom cursor that you can display
while your procedure is running, and enclose the retry code in a
non-yielding BeginBusy...EndBusy block with UseCursor enabled and
BusyCursor set to use this special cursor image.
And if re-establishing a connection is likely to take a long time, or
to be temporarily impossible, you would need to provide the ability
for the user to intervene and choose not to keep trying. You can use
the session timer for this, enclosing your "busy" block inside
another iterative block the prompts the user to "Cancel" or "Keep
Trying", at reasonable intervals.
Source
Check out if their database file is located on mapped network drive. Even if database file path appear to be local to file system, when using embedded Firebird server, function isc_attach_database will return error code 335544721 on attempt to establish connection. Exactly that was happening on my VirtualBox guest Windows XP when I first share entire host D drive and then mapped it again as D drive in virtual guest OS.
Workaround will be to move database file to local partition drive.
check your query length
max query length is 8191 chars UTF-8
its solved my problem
connect your pc to the internet, and the problem will be fixed,but i don't how it works
I am loosing my patience with "delay write failed" errors. It silently disconnects the database from the application so nothing gets saved in the database while using it. Is there a way to detect the occurrence itself so I can flash a warning ? Or perhaps monitoring the connection itself for a disconnection ? Everyone seems to miss the balloon tip from the Windows XP so I figured to flash a more visible warning that the application must be restarted. It seems Microsoft has found a way to force people to upgrade....
I suppose this could be done with a timer and constantly check connected users:
cxlabel1.Caption := IntToStr(DataModule2.ABSDatabase1.GetDBFileConnectionsCount);
But I was thinking more of checking/detecting for the occurence itself. Is there something in Delphi that can detect this?
I would like to hear your ideas on this...
Putting this as an answer because the comment length is limited.
I have seen this before. IIRC, the problem you have is that the Delayed Write Error is an OS error, it has nothing to do with your application. Windows has already told you that the write has been committed correctly to disk. You would have to try and hook into the OS errors to see when this is happening.
You need to get the network issues resolved because that's where the problem is. In our situation it was a faulty router that was causing the problem.
It's unfair to expect users to check for the error message and then handle it. They could be out at lunch when it occurs as it's not immediate. They also have no way of know what has been saved and what hasn't. It's only a matter of time before your database is corrupted.
The problem with a timer is that it might tell you everything is fine because it triggers after the network resolves the problems.
A far better approach would be to switch to a Client/Server database. You can do this by setting up your own server that listens for web service or another remote call or switch to a database that supports client/server instead of using a file based database. This will tell you immediately when there is a problem with the save of data.
He Guys,
Should I open the data connection to Sqlite every time I make a query? or is it possible to open the sqlite connection when the app opens and the connection stays open until the app exists?
Is this even a solution?
You shouldn't really be using SQLite directly at all. At least use FMDB. Given your apparent new-ness to development, I would recommend Core Data as it is extremely well supported in the OS and will lead to the fewest lines of code (when used correctly).
To answer your concrete question; no, generally, you do not open / close a connection with every single query.
I have a simple application, which should send a single byte to a serial port once a minute. But sometimes, from some strange reason, it freezes somewhere in the WriteFile() function. Both sw and hw flow controls are turned off. I've googled some stuff about pending read operations performed from another threads, but I believe this is not a problem, because my app has single thread. Also, handle from CreateFile looks valid, so the port should not be used by any other applications. Have anybody suffered this?
If you google for the words writefile hangs, you'll find a number of discussions on this problem. Some leads are buffer overruns, sizing your buffer correctly, a defective COM port, clearing the status on error... Seems like there are plenty of things to try.
Another thing I would suggest is to use a communications library instead of calling the API directly, something like Async Professional (http://sourceforge.net/projects/tpapro/). Even if they add some overhead to your application, they might simplify your work and avoid a number of potential pitfalls...
Well, I'm using this library: http://lhdelphi.ic.cz/uploader/storage/ComDrv32.pas in Delphi 7, on Windows XP, but the component inside is just a wrapper around some Win API calls, CreateFile, WriteFile, etc.
Have you tried setting CommPortDriver.CheckLineStatus to true ("to prevent hangs when not device connected or device is OFF")? The source for the comdrv32.pas library contains that suggestion.
You can also try ComPort, which was neglected for some time but is now actively developed again.