To explain it briefly, here is an example:
In build.xml, local-db.xml is imported. And in local-db.xml, there is a target named "warmup" which calls one target of the third file -- local-gr.xml using task.
All the common properties and classpath defs are imported and set in build.xml.
in project.properties:
dest-dir=./destination
in build.xml:
<path id="gr-classpath"> ... </path>
<import file="local-db.xml" />
in local-db.xml:
<ant antfile="local-gr.xml" target="deploy" inheritAll="true" inheritRefs="true" />
In local-gr.xml, there are two targets like this:
<target name="deploy">
<tar ....../>
<foreach list="${list1}" delimiter="," parallel="true" trim="true" param="item" target="deploy-single" />
</target>
<target name="deploy-single">
something using property ${dest-dir} and path "gr-classpath"
</target>
Now here is the problem:
The property ${dest-dir} and path "gr-classpath" can be used in "deploy" because I set inheritAll and inheritRefs, but it can't be used directly in "deploy-single". "inherit" doesn't when the target is called by foreach?
I managed to pass ${dest-dir} to "deploy-single" with the help of the , but I didn't find any way to pass the classpathref "gr-classpath" to "deploy-single".
What I did to work around it was to claim the again in "deploy-single", but I don't like it at all.
Why this happens? What can I do to make it more elegant?
The ant-contrib foreach task doesn't by default propagate all properties and references to it's target. But it does have inheritall and inheritrefs attributes that you can use to make that happen.
<foreach list="${list1}" delimiter="," parallel="true" trim="true"
param="item" target="deploy-single"
inheritall="true" inheritrefs="true"
/>
Related
We have a Java applet project and we generate the wrapper HTML using Ant, it looks a bit like this:
<target name="build-applet" description="Build web applet" depends="set-build-properties, set-properties">
<antcall target="clean" />
<antcall target="clean-applet" />
<antcall target="set-version" />
<antcall target="compile" />
<antcall target="jar" />
<antcall target="applet" />
</target>
<target name="applet">
<replace file="${applet.dir}/${applet.html.file}">
<replacefilter token="#jar.file#" value="${applet.jar.file}"/>
<replacefilter token="#assets.file#" value="${applet.assets.file}"/>
<replacefilter token="#codebase#" value="${applet.codebase}"/>
</target>
Note that ${applet.codebase} has to be the URL where the applet is loaded from e.g mysite.com/game. It's set in a properties file.
Now I want to be able to build this applet to two different locations, part of a live/test setup. e.g one is accessed at mysite.com/game and the other at mysite.com/test. I have it almost working, except for ${applet.codebase} because this needs to be different in each case. I thought I could have ${applet.codebase} and ${applet.codebase_test} but I don't know how to do this. Maybe there's a way to pass a flag into the applet target from build-applet, and add two top-level targets build-applet-live and build-applet-test which just call build-applet with the parameter.
Why not simply ant -Dapplet.codebase=whatever build.xml, means set ${applet_codebase} as userproperty (= those properties set via -Dkey=value) ?
I have populated a fileset at the start of script as follows;
<!-- Define the list of projects to be built -->
<fileset id="ivy.buildlist.fileset" dir="${ivy.buildlist.dir}" includes="${ivy.buildlist.includes}" excludes="${ivy.buildlist.excludes}" />
But I want to update this ref if user select a particular task. For that I have written a new target with <intersect> which will be called but its not updating the reference;
<target name="getPreReleaseList" description="Target to override the component list for pre release" >
<echo message="Existing List : ${toString:ivy.buildlist.fileset}" />
<intersect>
<fileset refid="ivy.buildlist.fileset" />
<fileset dir="${ivy.buildlist.dir}"
includes="${ivy.pre.buildlist.includes}"
excludes="${ivy.pre.buildlist.excludes}" />
</intersect>
<echo message="Updated List : ${toString:ivy.buildlist.fileset}" />
</target>
Before and after list in ivy.buildlist.fileset is same :(. Am I missing anything or do I have adapt a different approach.
Your problem is due to the fact that ant properties are immutable.
In order to modify a property, you could either use the variable task or use a macrodef.
I suggest you take a look at the following question for more detail.
Hi all this is my code for target calling.
<target name="abc">
<var name="x" value="10"/>
<antcall target="def"/>
<!--Again Access The value of x here and also change it here-->
</target>
<target name="def">
<!--Access The value of x here and also change it here-->
</target>
and also i want to access this X in other build file,is there any way
This is not possible with ant. In an properties are immutable and cannot be reset. The var task from ant contrib can be used to override values, but should be used sparingly.
You could use a temporary file to achieve what you want. But probably you are trying something weird, which can be solved in a different way.
This would also work across buildfiles if they have access to the property file.
<target name="abc">
<var name="x" value="10"/>
<antcall target="def"/>
<!--Again Access The value of x here and also change it here-->
<var unset="true" file="myproperty.properties" /> <!-- read variable from property file-->
</target>
<target name="def">
<echo file="myproperty.properties" append="false">x=12</echo> <!-- create a new propertyfile-->
</target>
For the sake of justice, there is a hack that allows to alter ant's immutable properties without any additional libs (since java 6):
<scriptdef name="propertyreset" language="javascript"
description="Allows to assing #{property} new value">
<attribute name="name"/>
<attribute name="value"/>
project.setProperty(attributes.get("name"), attributes.get("value"));
</scriptdef>
Usage:
<target name="abc">
<property name="x" value="10"/>
<antcall target="def"/>
</target>
<target name="def">
<propertyreset name="x" value="11"/>
</target>
As #oers mentioned, this should be used with care after all canonical approaches proved not to fit.
It is difficult to suggest further without knowing the goal behind the question.
I want to use manifestclasspath Ant task. I have a very large build.xml file with a couple of imported other build files and when I run it I get this:
build.xml:1289: The following error occurred while executing this line:
build.xml:165: Property 'some.property' already set!
I am sure that this property is defined only in manifestclasspath task. Here is my code:
<manifestclasspath property="some.property" jarfile="some.jar">
<classpath refid="some.classpath"/>
</manifestclasspath>
This code is located inside of <project>.
What am I doing wrong? Is there a way to add something like condition to set property only if it is not already set? I don't want to use custom Ant tasks such as Ant Contrib's if if there is other way around.
Antcall opens a new project scope, but by default, all of the properties of the current project will be available in the new project. Also if you used something like =
<antcall target="whatever">
<param name="some.property" value="somevalue"/>
</antcall>
in the calling project then ${some.property} is also already set and won't be overwritten, as properties once set are immutable in ant by design.
Alternatively, you may set the inheritAll attribute to false and only "user" properties (those passed on the command-line with -Dproperty=value) will be passed to the new project.
So, when ${some.property} ain't no user property, then use inheritAll="false" and you're done.
btw. it's better to use a dependency between targets via depends="..." attribute than to use antcall, because it opens a new project scope and properties set in the new project won't get back to the calling target because it lives in another project scope..
Following a snippet, note the difference, first without inheritAll attribute
<project default="foo">
<target name="foo">
<property name="name" value="value1" />
<antcall target="bar"/>
</target>
<target name="bar">
<property name="name" value="value2" />
<echo>$${name} = ${name}</echo>
</target>
</project>
output :
[echo] ${name} = value1
second with inheritAll=false
<project default="foo">
<target name="foo">
<property name="name" value="value1" />
<antcall target="bar" inheritAll="false" />
</target>
<target name="bar">
<property name="name" value="value2" />
<echo>$${name} = ${name}</echo>
</target>
</project>
output :
[echo] ${name} = value2
some rules of thumb for antcall, it's rarely used for good reasons :
1. it opens a new project scope (starting a new 'ant -buildfile yourfile.xml yourtarget') so it uses more memory, slowing down your build
2. depending targets of the called target will be called also !
3. properties don't get passed back to the calling target
In some cases it might be ok when calling the same 'standalone' target (a target that has no target it depends on) with different params for reuse. Normally macrodef or scriptdef are used for that purpose. So, think twice before using antcall which also puts superfluous complexity to your scripts, because it works against the normal flow.
Answer to your question in the comment, using a dependency graph instead of antcall
you have some target that holds all conditions and sets the appropriate properties which may be evaluated by targets via if and unless attributes to control the further flow
<project default="main">
<target name="some.target">
<echo>starting..</echo>
</target>
<!-- checking requirements.. -->
<target name="this.target">
<condition property="windowsbuild">
<os family="windows"/>
</condition>
<condition property="windowsbuild">
<os family="unix"/>
</condition>
<!-- ... -->
</target>
<!-- alternatively
<target name="yet.another.target" depends="this.target" if="unixbuild">
-->
<target name="another.target" depends="this.target" unless="windowsbuild">
<!-- your unixspecific stuff goes here .. -->
</target>
<!-- alternatively
<target name="yet.another.target" depends="this.target" if="windowsbuild">
-->
<target name="yet.another.target" depends="this.target" unless="unixbuild">
<!-- your windowspecific stuff goes here .. -->
</target>
I'm rather new to Ant but I have experienced it's quite good pattern to create generic ant targets which are to be called with antcall task with varying parameters.
My example is compile target, which compiles multiple systems using complex build command which is a bit different for each system. By using pattern described above it's possible not to create copy paste code for that compile command.
My problem here is, that I'm not aware of any way to pass return value (for example the return value of compiler) back to target which called the antcall task. So is my approach pathological and it's simply not possible to return value from antcall task or do you know any workaround?
Thanks,
Use antcallback from the ant-contrib jar instead of antcall
<target name="testCallback">
<antcallback target="capitalize2" return="myKey">
</antcallback>
<echo>a = ${myKey}</echo>
</target>
<target name="capitalize2">
<property name="myKey" value="it works"/>
</target>
Output:
testCallback:
capitalize2:
[echo] a = it works
BUILD SUCCESSFUL
One approach is to write out a property to a temp file using "echo file= ...." or PropertyFile task. Then read the property back in where required. Kludge but works.
Ant tasks are all about stuff goes in, side effect happens. So trying to program in terms of functions (stuff goes in, stuff comes out) is going to be messy.
That said what you can do is generate a property name per invocation and store the result value in that property. You would need to pass in a indentifier so you do not end up trying to create copies of the same property. Something like this:
<target name="default">
<property name="key" value="world"/>
<antcall target="doSomethingElse">
<param name="param1" value="${key}"/>
</antcall>
<echo>${result-${key}}</echo>
</target>
<target name="doSomethingElse">
<property name="hello-${param1}" value="it works?"/>
</target>
But I believe the more typical approach -instead of antcalls- is to use macros. http://ant.apache.org/manual/Tasks/macrodef.html
Antcall can be used from the ant-contrib jar task.
You can get a similar behaviour with the keyword "depends".
<?xml version="1.0" encoding="UTF-8"?>
<project name="test" default="main">
<target name="main">
<antcall target="build-system-with-depends" />
<!-- wait for different results -->
<waitfor checkevery="1000" checkeveryunit="millisecond" maxwaitunit="millisecond" maxwait="2000">
<available file="dummy.not.present.file" classname="" property=""></available>
</waitfor>
<antcall target="build-system-with-depends" />
</target>
<target name="build-system-with-depends" depends="do-compiler-stuff">
<echo>$${compiler.result}=${compiler.result}</echo>
</target>
<target name="do-compiler-stuff">
<!-- simulate different return states -->
<tstamp>
<format pattern="yyyyMMddHHmmss" property="compiler.result" />
</tstamp>
</target>
</project>