I would like to create a XPages form to print it out. I am not sure which is the best way to do this. I mean I need to create a panel or table or any other design elements then put all my staff in it?
I need advise:)
Regards
Cumhur Ata
Speak after me: browsers don't print.
If you need precision layout a browser is your worst enemy. Each one renders slightly different, so don't bother.
Your best bet is to create a PDF file for printing. There you have pixel-perfect rendering as you deem fit.
You can use iText, PDFBox or XSL:FO to generate PDF. There are code samples on OpenNTF or you read my blog entries about it.
How does the Reader function of Mobile Safari in iOS 5 work? How do I enable it on my site. How do I tell it what content on my page is an article to trigger this function?
A lot of the answers posted here contain false information. Here are some corrections/clarifications:
The <article> element works fine as a wrapper; Safari Reader recognizes it. My site is an example. It doesn’t matter which wrapper element you choose, as long as there is one, other than <body> or <p>. You can use <article>, <div>, <section>; or elements that are semantically incorrect for this purpose, like <nav>, <aside>, <footer>, <header>; or even inline elements like <span> (!).
No headings are required for Reader to work. Here’s an example of a document without any <h*> elements on which Reader works fine: http://mathiasbynens.be/demo/safari-reader-test-3
I posted some more details regarding my findings here: http://mathiasbynens.be/notes/safari-reader
I've tested 100 or so variations of this on my iPhone in order to figure out what triggers this elusive Reader state. My conclusions are as follows:
Here is what I found had an impact:
Having around 200 or more words (or 1000 characters including whitespace) in the article you want to trigger the "Reader" seems necessary
The reader was NEVER triggered when I had less than 170 words; although it was sometimes triggered when I had 180 or 190 words.
Text inside certain elements such as <ol> or <ul> (that are not typically used to contain a story) will not count towards the 200 words (they will however be displayed in the reader if the reader is triggered for other reasons)
Wrapping the 200 words in a block element such as a <div> or <article> seems necessary (that said, I'd be surprised if there were any websites where that was not already the case)
For full disclosure, here is what I found did NOT have an impact:
Whether using a header or not
Whether wrapping the text in a <p> or letting it flow freely
Punctuations (ie removing all periods, commas, etc, did not have an impact)
It seems the algorithm it is based on is looking for p-Tags and it counts delimiters like "." in the innerText. The section (div) with the most points gets the focus.
see:
http://lab.arc90.com/experiments/readability/
Seems to be the base for the Reader-mode, at least Safari attributes it in the Acknowledgements, see:
file:///C:/Program%20Files/Safari/Safari.resources/Help/Acknowledgments.html
Arc90 ( Readability )
Copyright © Arc90 Inc.
Readability is licensed under the Apache License, Version 2.0.
This question (How to disable Safari Reader in a web page) has more details. Copied here:
I'm curious to know more about what triggers the Reader option in Safari and what does not. I wouldn't plan to implement anything that would disable it, but curious as a technical exercise.
Here is what I've learned so far with some basic playing around:
You need at least one H tag
It does not go by character count alone but by the number of P tags and length
Probably looks for sentence breaks '.' and other criteria
Safari will provide the 'Reader' if, with a H tag, and the following:
1 P tag, 2417 chars
4 P tags, 1527 chars
5 P tags, 1150 chars
6 P tags, 862 chars
If you subtract 1 character from any of the above, the 'Reader' option is not available.
I should note that the character count of the H tag plays a part but sadly did not realize this when I determined the results above. Assume 20+ characters for H tag and fixed throughout the results above.
Some other interesting things:
Setting for P tags removes them from the count
Setting display to none, and then showing them 230ms later with Javascript avoided the Reader option too
I'd be interested if anyone can determine this in full.
Both Firefox and Chrome have the similar plugin named iReader. Here is its project with source code.
http://code.google.com/p/ireader-extension/
Read the code to get more.
I was struggling with this. I finally took out the <ul> markings in my story, and viola! it started working.
I didn't put any wrapper around the body, but may have done it by accident.
HTML5 article tag doesn't trigger it on my tests. It also doesn't seem to work on offline content (i.e. pages saved on your local machine).
What does seem to trigger it is a div block with a lot of p's with a lot of text.
The p tag theory sounds good. I think it also detects other elements as well. One of our pages with 6 paragraphs didn't trigger the Reader, but one with 4 paragraphs and an img tag did.
It's also smart enough to detect multi-page articles. Try it out on a multi-page article on nytimes.com or nymag.com. Would be interested to know how it detects that as well.
Surprising though it may be, it indeed does not pay any attention to the HTML5 article tag, particularly disappointing given that Safari 5 has complete support for article, section, nav, etc in CSS--they can be styled just like a div now, and behave the same as any block level element.
I had specifically set up a site with an article tag and several inner section tags, in prep for semantic HTML5 labeling for exactly such a purpose, so I was really hoping that Safari 5 would use that for Reader. No such luck--probably should file a bug on this, as it would make a great deal of sense. It in fact completely ignores most of the h2 level subheads on the page, each marked as a section, only displaying the single div that adheres to the criteria mentioned previously.
Ironically, the old version of the same site, which has neither article, section, nor separating div tags, recognizes the whole body for display in Reader.
See Article Publishing Guidelines.
Here are APIs about how to read and parse: Readability Developer APIs. There's already a project you can refer: ruby-readability.
A brief history:
The Safari Reader feature since Apple's Safari 5 browser embeded a codebase named Readability, and Readability started off as a simple, Javascript-based reading tool that turned any web page into a customizable reading view. It was released by Arc90 (as an Arc90 Lab experiment), a New York City-based design and technology shop, back in early 2009. It's also embeded in Amazon Kindle and popular iPad applications like Flipboard and Reeder.
I am working on algorithms for cleaning web-sites from information "waste" similar to Safari Reader feature. It's not so good as readability but has some cool stuff.
You can learn more at smartbrowser.codeplex.com project page.
In popular desktop ebook viewers like calibre, FBreader or Cool Reader, I'm missing a feature to show ebooks in the same pagination as their printed counterparts. Some people (here, too) claim that epub does not have a page concept (e.g. at how to implement 'page break' in epub reader).
But this is not true. From http://www.idpf.org/accessibility/guidelines/content/xhtml/pagenum.php:
"If an ebook is produced from the same workflow as a print document, print pagination markers should be retained in the document. These markers benefit readers in mixed print/digital environments, such as a classroom, as the page numbers allow a common point of reference between the two editions." and from its FAQ-section: "Do page numbers really matter anymore? - Yes. Despite the assertions of the futurists and technophiles, print still reigns supreme. As a result, anyone in a mixed print/digital environment — using an assistive technology or not — needs a way synchronize electronic and print content."
I tested several ebook viewers with two different documents that contain page break tags, but they did not break up into pages (or I'm missing a preference option). Any help, infos are highly appreciated.
You can force page break with CSS and the property page-break-after=always but is not the best page layout for an ebook. For example add a class to your epub:type="pagebreak" label with that style.
<span epub:type="pagebreak" id="page23" class="pagenumber">23</span>
.pagenumber { /* other styles*/ page-break-after=always !important; }
Just wondering what the shorthand would be in Rails to do this (if any):
I have views/pages/ containing 5 html.erb files and they all use the same default layout.html.erb, with one yield statement in the middle of it (the standard setup).
Now I want one view that incorporates all 5 of those erb files above contiguously, one after the other, in place of the one existing yield statement in that same layout.html.erb.
What minimal changes would I make to the layout.html.erb to accomplish this.
(Rails Newbie - like it more than Django now).
Ah,
I see what you're saying. Try this. Have your file structure such that all the views for said controller are in one folder...
#controllers_views = Dir.glob("your/controllers/views/*.erb")
#controllers_views.each { |cv| puts cv }
Seems like that would work, I'm away from my dev box or I'd test it for you.
Hope that helps.
Good luck!
You could always have a javascript that requests the sequential yields at a time interval as an ajax request. Then just your target element change to reflect the updated information.
Alternatively load all 5 into different divisions, and have them revolve visibility, like a picture gallery. CSS3 could pull this off.
http://speckyboy.com/2010/06/09/10-pure-css3-image-galleries-and-sliders/
Tagsoup is interfering with input and formatting it incorrectly. For instance when we have the following markup
Text outside anchor
It is formatted as follows
Text outside anchor
This is a simple example but we have other issues as well. So we made tagsoup cleanup/formatting optional by adding an extra attribute to textarea control.
Here is the diff(https://github.com/binnyg/orbeon-forms/commit/044c29e32ce36e5b391abfc782ee44f0354bddd3).
Textarea would now look like this
<textarea skip-cleanmarkup="true" mediatype="text/html" />
Two questions
Is this the right approach?
If I provide a patch can it make it to orbeon codebase?
Thanks
BinnyG
Erik, Alex, et al
I think there are two questions here:
The first Concern is a question of Tag Soup and the clean up that happens OOTB: Empty tags are converted to singleton tags which when consumed/sent to the client browser as markup gets "fixed" by browsers like firefox but because of the loss of precision they do the wrong thing.
Turning off this clean up helps in this case but for this issue alone is not really the right answer because we it takes away a security feature and a well-formed markup feature... so there may need to be some adjustment to the handling of at least certain empty tags (other than turning them in to invalid singleton tags.)
All this brings us to the second concern which is do we always want those features in play? Our use-case says no. We want the user to be able to spit out whatever markup they want, invalid or not. We're not putting the form in an app that needs to protect the user from cross script coding, we're building a tool that lets users edit web pages -- hence we have turned off the clean-up.
But turning off cleanup wholesale? Well it's important that we can do it if that's what our usecase calls for but the implementation we have is all or nothing. It would be nice to be able to define strategies for cleanup. Make that function plug-able. For example:
* In the XML Config of the system define a "map" of config names to class names which implement the a given strategy. In the XForm Def the author would specify the name from the map.
If TagSoup transforms:
Text outside anchor
Into:
Text outside anchor
Wouldn't that be bug in TagSoup? If that was the case, then I'd say that it is better to fix this issue rather than disable TagSoup. But, it isn't a bug in TagSoup; here is what seems to be happening. Say the browsers sends the following to the client:
<a shape="rect"></a>After<br clear="none">
This goes through TagSoup, the result goes through the XSLT clean-up code, and the following is sent to the browser:
<a shape="rect"/>After<br clear="none"/>
The issue is on the browser, which transforms this into:
<a shape="rect">After</a><br clear="none"/>
The problem is that we serialize this as XML with Dom4jUtils.domToString(cleanedDocument), while it would be more prudent to serialize it as HTML. Here we could use the Saxon serializer. It is also used from HTMLSerializer. Maybe you can try changing this code to use it instead of using Dom4jUtils.domToString(). You'll let us know what you find when a get a chance to do that.
Binesh and I agree, if there is a bug it would be a good idea to address the issue closer to the root. But I think the specific issue he is only part of the matter.
We're thinking it would be best to have some kind of name-to-strategy mapping so that RTEs can call in the server-side processing that is right for them or the default if it's not specified.