I'm new to ProcessMaker 4, I want to install it on Windows. I found a help about the installation on the web site of pm, but I want to get more help. I need a video tutorial about the installation in Win environment or a step by step help. Thank you!
Depends on what you are trying to accomplish.
If you are looking to install open Source version to test things out then refer to
Twenkid answer here.
However, If you are going for the enterprise edition, Your Operating system does not matter. Simply make contact with PM team and they will set up a cloud instance for you.
PM4 offers a smooth experience.
The installation instructions for the latest version are in github:
https://github.com/ProcessMaker/processmaker
The instructions are on Linux and the requirements include VirtualBox, it seems it's recommended on Windows to install it on a Linux virtual machine, e.g.CentOS or Amazon Linux, see the answer here:
Requesting ProcessMaker 4 Installation Documenation
i am using virtual dedicated server and the configuration is windows server 2008 R2 standered edition. I recently upgraded it to PHP version 5.3.10(thread Safe version). I Installed PHP ImageMagick version /ImageMagick-6.6.3-0-Q16-windows-dll.exe by following the steps given at http://gary-greendale.blogspot.in/2011/01/install-php-imagemagick-and-imagick-for.html
I got my php ImageMAgick working finally(after nth attempts) using command prompt. but now i am tryin to use php_imagick.dll to load iMagick Library with PHP.
After thousands of efforts and lots of dll files replaced (tried many versions)
http://valokuva.org/builds/
http:+//valokuva.org/builds/ext/vc9/nts/imagick/2011-04-25_1849/
http:+//valokuva.org/builds/ext/vc9/ts/imagick/2011-04-25_1849/
and many other thread and non thread safe versions. Please suggest me the correct version of the php_imagick.dll so that i can get it running on my server.
I am sure the issue is related to php_imagick.dll's version.
Its kinda urgent now help please
The problem is that those versions at valokuva.org are VC9 and versions of ImageMagick after 6.6.2-10 are VC10. Basically, you're going to need to downgrade to an earlier version of ImageMagick if you want to run it with those IMagick binaries.
I know this because I just dealt with it today and found the solution on an Apache forum. Once I downgraded to 6.6.2-10, it started working.
Here's a link to the forum post...
I am working over linux in our office for development over Ruby on Rails but in home i have Windows XP installed. It has different IDE installed for .NET and PHP development. So i don't want to get rid of those stuff also so kindly guide best IDE for Ruby on Rails Develpment over windows with MySQL as Database..
I suggest RubyMine. Good Rails 3 support and provides a nice integration with your project elements and Rails tools.
I'm also currently working on Linux and NetBeans. Netbeans also supports Windows and you can have PHP as well. But unfortunately NetBeans has discontinued their Rails support from version 7.0. So long term, it might be a problem.
Another one is RedCar (http://redcareditor.com/), this is also good.
Also Aptana RadRails (http://www.aptana.com/products/radrails) can also be used (they offer Eclipse plugin also).
And if you are looking for a paid one I would say go for Rubymine (http://www.jetbrains.com/ruby/).
But as the final note. I have setup dual boot in my home laptop and do all the development except (.net) in Linux because you know Linux rocks :D
Have you tried Aptana?
I would propose that you use NetBeans with Ruby support. It is great and easy to use. I am using it.
I tried using Aptana, I just couldn't get it working.
I am using netbeans for ubuntu as well as for windows. you can download it here.
My goal is to deploy an existing Rails app on a machine. Oh, and the machine is on a handful of terminals in a remote community in the north of Australia. Oh, and I can't rely on there being Internet access for troubleshooting or admin purposes.
I'd like to package the app with a fresh copy of Rails and all of the apps dependencies (some of which must be built natively) so that the server can be run and a browser used as the front-end. The remote machines are modern Macs, and I should be able to replicate the configuration for testing here.
I've spotted some projects like Locomotive and Joyent Slingshot, as mentioned in this thread, but both of those projects seem to have been abandoned, and this link is Windows-specific.
Does anyone have any guidance as to what the modern way of doing this is? A community project thanks you in advance :)
Well, assuming those remove machines have Ruby available, you could use Bundler to freeze all your gems in your project:
bundle package
Read more at getbundler.com
In the installation documentation to RoR it mentions that there are many limitations to running Ruby on Rails on Windows, and in some cases, whole libraries do not work.
How bad are these limitations, should I always default to Linux to code / run RoR, and is Iron Ruby expected to fix these limitations or are they core to the OS itself?
EDIT Thanks for the answer around installation and running on Linux, but I am really trying to understand the limitations in functionality as referenced in the installation documentation, and non-working libraries - I am trying to find a link to the comment, but it was referenced in an installation read me when I installed the msi package I think
EDIT
Thanks for the references to IronRuby lately, it is certainly a project to watch, and as it, obviously, is a .NET language, it will be invaluable if it lives up to the promises. Eventually, however, in my case, I just bit the bullet and installed an Ubuntu server.
<bias> I should've done it years ago </bias>
Here's an overview of the current issues with Rails on Windows:
Ruby and Rails are slower on Windows than they are on Unix-like OS's.
A few gems and libraries don't work on Windows.
Some Unix-isms aren't available on Windows (examples).
The community is mostly on either Mac or Linux (This is a particularly hard one to deal with; nobody wants to be alone on one island when the rest of the tribe are partying, having fun and getting along great over on the other island. Community is important. It seems that most Windows developers that start with Rails quickly switch to a Mac or Linux. However, the small community of Windows Ruby users that do persist are extremely friendly, dedicated and knowledgeable - go say hi.)
Note much of the advice that follows is now outdated due to the magnificent efforts of the RubyInstaller team in bringing stability, compatibility and performance to Ruby on Windows. I no longer have to use VirtualBox, which says a lot about how far Ruby on Windows has come.
If you want more technical detail, the following are required reading. :
Ruby for Windows - Part 1
Is Windows a supported platform for Ruby? I guess not
Testing the new One-Click Ruby Installer for Windows
Still playing with Ruby on Windows
Chatting with Luis Lavena (Ruby on Windows)
Choice quote from that last one is:
AkitaOnRails: The most obvious thing is that any Gem with C Extensions without proper binaries for Windows will fail. Trying to execute shell commands will fail and RubyInline as well. What else?
Luis Lavena: Hehe, that's just the tip of the iceberg
Having said all that, I don't find developing with Rails on Windows too painful. Using Ruby is, for the most part, a pleasure. I'd avoid InstantRails because, to be frank, it's just as easy to install Ruby properly using the one-click installer, then doing a gem install rails. If you need Apache and MySQL, WAMP is a good bet, although even these aren't required if you just stick with Mongrel and SQLite.
What I've taken to doing recently is running VirtualBox with an instance of Ubuntu Server that closely mirrors the deployment server. I map a network drive to the Ubuntu Server, then I edit and run my code directly on the VM. It uses hardly any memory (it's currently using ~43MB; contrast that with Firefox, which is using ~230MB) and Rails actually performs better than running it natively on Windows. Plus you can experiment with your virtual server in relative safety. It's a really nice setup, I highly recommend it.
Finally, here are a couple of Ruby/Rails blogs aimed at Windows users:
DEV_MEM.dump_to(:blog) (Luis Lavena)
Softies on Rails
Ruby On Windows
I found getting a development environment up and running with Instant Rails on Windows was really simple. Especially when using Netbeans or Radrails as the IDE.
Less than a 10 minute job.
What did those who struggled find to be the problem?
I've been developing Rails on a Windows PC for a couple of years and had no real problems installing back when I first started. However I recently re-built my machine and struggled to get the One-Click Ruby installer working and the latest version of Gems. So this is what I tried.
Option 1: Run a Linux Virtual Machine
I was really impressed with Charles Roper's idea of running Rails within a Linux virtual machine, and this is the route I intially went for. It all went pretty smoothly and I've been documenting it at budanters.blogspot.com. However I've been struggling with accessing the MySQL server (in Linux Virtual Machine) from the Windows host.
Option 2: Use jRuby
I recently installed the Windows version of NetBeans 6.5 Ruby bundle, and without being aware of it, this installs JRuby and the Rails gems. The IDE has a UI to install Gems, and I've now got my old application back up and running in my development enviromnent.
Update November 2009
I now use Netbeans 6.7 on Windows and in the whole I am very happy with it. The only downsides are that it installs JRuby 1.2, and I needed to install JRuby 1.3 manually to get something working (I can't remember what) and I have been completely unable to get deployment working with either Capistrano or Vlad the Deployer to work. Vlad uses Open4 which doesn't work with JRuby.
Update May 2010
Netbeans 6.8 comes with JRuby 1.4 so no longer have to fiddle around with manually installing JRuby 1.3. Also it seems that in JRuby 1.5 Open4 will now work, which means Vlad might start working.
Nobody mentioned Bitnami RubyStack yet? I've been using it for years, together with RadRails. Includes Apache, MySQL/Postgre, phpmyadmin, git etc. Optional Ruby 1.9.2/Rails 3.0b. You may also run the Ubuntu flavor of RubyStack in a VM but I haven't tried that yet.
There is a packaged installer available at http://railsinstaller.org/ which is worth checking out.
Personally I found getting Ruby + Rails up and running on windows a piece of cake. From download to browsing to my first 'HelloWorld' app took me all of 15 minutes. I didn't even bother with any of the InstantRails stuff.
Subsequently I can't say I encountered any of the reported speed problems or issues with Gems under Windows.
These guys also do a nice Ruby developers add on for Visual Studio:
http://www.sapphiresteel.com/
When I last fiddled around with Rails on windows, I used Instant Rails and found it to be a fairly painful process, except for the lack of updates to Instant Rails (which, from the look of the website is still a little bit of a problem, as instant Rails 2.0 uses ROR 2.0, while the newest version is 2.1). You might also look into the answers to this question as it mentions a number of other ways to get RoR running on windows easily.
You have windows options for getting everything up and installed, such as Instantrails:
However, my personal experience with trying to get colleagues up and running on windows is that it's a pretty painful experience. You should be able to get most (if not everything) running, but be prepared to spend a bit of time mucking round (and getting frustrated).
YMMV
I would probably recommend either Linux or Mac for rails development (but I'm slightly biased against windows, so you may need to take that with a grain of salt).
An option if you're stuck on Windows is to have virtual servers running Linux / BSD / what-have-you.
It solves lots of other problems also (allowing you to try multiple server configurations easily, etc.).
If you can't get away from windows use VMware and run some form of linux (ubuntu is popular). Your No.1 limitation will be compiled gems which do not play nicely on windows.
The majority of tutorials assume you're on some form of *nix, it's when you start to break outside of basic scaffolding when you'll feel the pain. Image manipulation, full-text search and even some db adapters will either only run on *nix or are a pain to setup.
The majority of web hosts run linux too, it's good to be developing on the same platform as your host, to avoid deployment headaches.
In general, Rails performance is a problem on Windows.
As far as your deployment setup, you can either run Rails in FCGI or use mongrel (and set up either Apache or IIS as a proxy). mod_rails (http://www.modrails.com) is the best deployment option for Rails today, but doesn't run on Windows.
You might find more luck using JRuby on Windows to run Rails in whatever JVM environment you want (tomcat, J2EE server, etc).
IronRuby isn't there yet to run Rails in a production environment, but eventually it will be aimed at running Rails inside any ASP.NET environment (IIS).
You could just use Cygwin and it's version of Ruby. That gets rid of the arguments about compiled gems not working on Windows - I've managed to compile a lot of gems that way.
The biggest limitation of running under Windows is that a lot of things are super slow.
See this thread. For a discussion.
Simple things like "script/console" and running rake tasks will take 5 times longer on Windows than they do on Linux or Mac.
Other limitations are:
No IE6 on Vista.
BackgroundRB and a many other c based gems do not work on Windows.
No passenger
I'm not a rails developer myself but I thought this may be of interest. Microsoft has released IronRuby 1.0, it's a version of Ruby that runs on the .NET platform that apparently runs 4x faster than the official Rails implementation on Windows.
http://www.drdobbs.com/open-source/224600662
Official site
http://ironruby.codeplex.com/
For a speedup you could try my loader speeder upper (helps rails run faster in doze): https://github.com/rdp/faster_require
Also checkout spork, which works in doze
Alternative of RailsIntaller is RailsFTW. The Ruby & Rails are more updated.