I have a rails app with Cucumber 1.0.0 and cucumber-rails 1.0.2. These tests ran fine last night. Today I just altered some step definitions and tried to run the tests and got the error below. I haven't changed anything in the cucumber support files. Any ideas?
grouperty $ cucumber
Using the default profile...
no such file to load -- /Users/davidtuite/wd/grouperty/features/config/environment(LoadError)
/Users/davidtuite/.rvm/rubies/ruby-1.9.2-head/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require'
/Users/davidtuite/.rvm/rubies/ruby-1.9.2-head/lib/ruby/site_ruby/1.9.1/rubygems/custom_require.rb:36:in `require'
/Users/davidtuite/wd/grouperty/features/support/env.rb:12:in `block in <top (required)>'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/spork-0.9.0.rc9/lib/spork.rb:24:in `prefork'
/Users/davidtuite/wd/grouperty/features/support/env.rb:10:in `<top (required)>'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/rb_support/rb_language.rb:143:in `load'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/rb_support/rb_language.rb:143:in `load_code_file'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/runtime/support_code.rb:176:in `load_file'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/runtime/support_code.rb:78:in `block in load_files!'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/runtime/support_code.rb:77:in `each'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/runtime/support_code.rb:77:in `load_files!'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/runtime.rb:137:in `load_step_definitions'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/runtime.rb:39:in `run!'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/cli/main.rb:43:in `execute!'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/lib/cucumber/cli/main.rb:20:in `execute'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/gems/cucumber-1.0.0/bin/cucumber:14:in `<top (required)>'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/bin/cucumber:19:in `load'
/Users/davidtuite/.rvm/gems/ruby-1.9.2-head#grouperty/bin/cucumber:19:in `'
Here is the content of /features/support/env.rb. Note that most of it was generated by the spork gem (v0.9.0.rc9).
# IMPORTANT: This file is generated by cucumber-rails - edit at your own peril.
# It is recommended to regenerate this file in the future when you upgrade to a
# newer version of cucumber-rails. Consider adding your own code to a new file
# instead of editing this one. Cucumber will automatically load all features/**/*.rb
# files.
require 'rubygems'
require 'spork'
Spork.prefork do
ENV["RAILS_ENV"] ||= 'test'
require File.expand_path("../../config/environment", __FILE__)
require 'cucumber/rails'
# Capybara defaults to XPath selectors rather than Webrat's default of CSS3. In
# order to ease the transition to Capybara we set the default here. If you'd
# prefer to use XPath just remove this line and adjust any selectors in your
# steps to use the XPath syntax.
Capybara.default_selector = :css
end
Spork.each_run do
# By default, any exception happening in your Rails application will bubble up
# to Cucumber so that your scenario will fail. This is a different from how
# your application behaves in the production environment, where an error page will
# be rendered instead.
#
# Sometimes we want to override this default behaviour and allow Rails to rescue
# exceptions and display an error page (just like when the app is running in production).
# Typical scenarios where you want to do this is when you test your error pages.
# There are two ways to allow Rails to rescue exceptions:
#
# 1) Tag your scenario (or feature) with #allow-rescue
#
# 2) Set the value below to true. Beware that doing this globally is not
# recommended as it will mask a lot of errors for you!
#
ActionController::Base.allow_rescue = false
# Remove/comment out the lines below if your app doesn't have a database.
# For some databases (like MongoDB and CouchDB) you may need to use :truncation instead.
begin
DatabaseCleaner.strategy = :transaction
rescue NameError
raise "You need to add database_cleaner to your Gemfile (in the :test group) if you wish to use it."
end
# You may also want to configure DatabaseCleaner to use different strategies for certain features and scenarios.
# See the DatabaseCleaner documentation for details. Example:
#
# Before('#no-txn,#selenium,#culerity,#celerity,#javascript') do
# DatabaseCleaner.strategy = :truncation, {:except => %w[widgets]}
# end
#
# Before('~#no-txn', '~#selenium', '~#culerity', '~#celerity', '~#javascript') do
# DatabaseCleaner.strategy = :transaction
# end
#
end
this line
require File.expand_path("../../config/environment", __FILE__)
requires
/Users/davidtuite/wd/grouperty/features/config/environment
which is not present there this causes error
Related
I am following this guide on building a restful json api https://www.digitalocean.com/community/tutorials/build-a-restful-json-api-with-rails-5-part-one#project-setup
I have followed every single step up until the models area ( there are 5 areas, Prerequisites, Project Setup,Models,Controllers,Conclusion) where the testing begins ...
however when I am trying to run any tests all my examples (5 of them) are all failed.
C:\Users\nion1\todos-api>bundle exec rspec
FFFFF
Failures:
1) Item
Failure/Error: example.run
`name` is not available from within an example (e.g. an `it` block) or from constructs that run in the scope of an example (e.g. `before`, `let`, etc). It is only available on an example group (e.g. a `describe` or `context` block).
# ./spec/rails_helper.rb:53:in `block (3 levels) in <top (required)>'
# ./spec/rails_helper.rb:52:in `block (2 levels) in <top (required)>'
2) Item
Failure/Error: example.run
`name` is not available from within an example (e.g. an `it` block) or from constructs that run in the scope of an example (e.g. `before`, `let`, etc). It is only available on an example group (e.g. a `describe` or `context` block).
# ./spec/rails_helper.rb:53:in `block (3 levels) in <top (required)>'
# ./spec/rails_helper.rb:52:in `block (2 levels) in <top (required)>'
3) Todo
Failure/Error: example.run
`name` is not available from within an example (e.g. an `it` block) or from constructs that run in the scope of an example (e.g. `before`, `let`, etc). It is only available on an example group (e.g. a `describe` or `context` block).
# ./spec/rails_helper.rb:53:in `block (3 levels) in <top (required)>'
# ./spec/rails_helper.rb:52:in `block (2 levels) in <top (required)>'
4) Todo
Failure/Error: example.run
`name` is not available from within an example (e.g. an `it` block) or from constructs that run in the scope of an example (e.g. `before`, `let`, etc). It is only available on an example group (e.g. a `describe` or `context` block).
# ./spec/rails_helper.rb:53:in `block (3 levels) in <top (required)>'
# ./spec/rails_helper.rb:52:in `block (2 levels) in <top (required)>'
5) Todo
Failure/Error: example.run
`name` is not available from within an example (e.g. an `it` block) or from constructs that run in the scope of an example (e.g. `before`, `let`, etc). It is only available on an example group (e.g. a `describe` or `context` block).
# ./spec/rails_helper.rb:53:in `block (3 levels) in <top (required)>'
# ./spec/rails_helper.rb:52:in `block (2 levels) in <top (required)>'
Finished in 0.10099 seconds (files took 1.52 seconds to load)
5 examples, 5 failures
Failed examples:
rspec ./spec/models/item_spec.rb:8 # Item
rspec ./spec/models/item_spec.rb:11 # Item
rspec ./spec/models/todo_spec.rb:8 # Todo
rspec ./spec/models/todo_spec.rb:11 # Todo
rspec ./spec/models/todo_spec.rb:12 # Todo
I am really trying to understand a way to fix this error but i just cant figure it out..
Any ideas ? Anything would be really helpful
my files :
rails_helper.rb:
require 'spec_helper'
ENV['RAILS_ENV'] ||= 'test'
require File.expand_path('../config/environment', __dir__)
# Prevent database truncation if the environment is production
abort("The Rails environment is running in production mode!") if Rails.env.production?
require 'rspec/rails'
# Add additional requires below this line. Rails is not loaded until this point!
Shoulda::Matchers.configure do |config|
config.integrate do |with|
with.test_framework :rspec
with.library :rails
end
end
# Requires supporting ruby files with custom matchers and macros, etc, in
# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
# run as spec files by default. This means that files in spec/support that end
# in _spec.rb will both be required and run as specs, causing the specs to be
# run twice. It is recommended that you do not name files matching this glob to
# end with _spec.rb. You can configure this pattern with the --pattern
# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
#
# The following line is provided for convenience purposes. It has the downside
# of increasing the boot-up time by auto-requiring all files in the support
# directory. Alternatively, in the individual `*_spec.rb` files, manually
# require only the support files necessary.
#
# Dir[Rails.root.join('spec', 'support', '**', '*.rb')].each { |f| require f }
# Checks for pending migrations and applies them before tests are run.
# If you are not using ActiveRecord, you can remove these lines.
begin
ActiveRecord::Migration.maintain_test_schema!
rescue ActiveRecord::PendingMigrationError => e
puts e.to_s.strip
exit 1
end
RSpec.configure do |config|
# Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
config.include FactoryBot::Syntax::Methods
# start by truncating all the tables but then use the faster transaction strategy the rest of the time.
config.before(:suite) do
DatabaseCleaner.clean_with(:truncation)
DatabaseCleaner.strategy = :transaction
end
# start the transaction strategy as examples are run
config.around(:each) do |example|
DatabaseCleaner.cleaning do
example.run
end
end
config.fixture_path = "#{::Rails.root}/spec/fixtures"
# If you're not using ActiveRecord, or you'd prefer not to run each of your
# examples within a transaction, remove the following line or assign false
# instead of true.
config.use_transactional_fixtures = true
# RSpec Rails can automatically mix in different behaviours to your tests
# based on their file location, for example enabling you to call `get` and
# `post` in specs under `spec/controllers`.
#
# You can disable this behaviour by removing the line below, and instead
# explicitly tag your specs with their type, e.g.:
#
# RSpec.describe UsersController, :type => :controller do
# # ...
# end
#
# The different available types are documented in the features, such as in
# https://relishapp.com/rspec/rspec-rails/docs
config.infer_spec_type_from_file_location!
# Filter lines from Rails gems in backtraces.
config.filter_rails_from_backtrace!
# arbitrary gems may also be filtered via:
# config.filter_gems_from_backtrace("gem name")
end
spec/models/todo_spec.rb:
require 'rails_helper'
# Test suite for the Todo model
RSpec.describe Todo, type: :model do
# Association test
# ensure Todo model has a 1:m relationship with the Item model
it { should have_many(:items).dependent(:destroy) }
# Validation tests
# ensure columns title and created_by are present before saving
it { should validate_presence_of(:title) }
it { should validate_presence_of(:created_by) }
end
item_spec.rb:
require 'rails_helper'
# Test suite for the Item model
RSpec.describe Item, type: :model do
# Association test
# ensure an item record belongs to a single todo record
it { should belong_to(:todo) }
# Validation test
# ensure column name is present before saving
it { should validate_presence_of(:name) }
end
Upgrading shoulda-matchers and rspec-rails to the latest versions worked for me
I tried that tutorial as well. I am working with Ruby 2.7.2 and Rails 6.1.3, I need to update the gem 'rspec-rails', '~> 4.0' in order to fix that issue.
Okay, so the problem seemed to be the version of ruby and rails.
For some reason ruby 2.7.2 and Rails 6.0.3.4 worked for my problem.
Of course GemFile needs to be changed
In the gem file if rspec's version is < 4 try to replace it with the latest version or with the below line.
gem 'rspec-rails', '~> 4.0'
It worked for me
I solved, in my case function like was say here updating gem rspec-rails like below:
gem 'rspec-rails', ~>4.0 gem 'shoulda-matchers', '~> 5.0'
For rails 6.1.4.1 is fine
I'm using Rails (5.1.0), Mongoid(6.1.0) and Rspec(3.6.0). I have removed active record from my app. Everything is working perfectly apart from tests. When I'm running rspec i get error:
Failure/Error: raise ConnectionNotEstablished, "No connection pool with '#{spec_name}' found." unless pool
ActiveRecord::ConnectionNotEstablished:
No connection pool with 'primary' found.
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/activerecord-5.1.0/lib/active_record/connection_adapters/abstract/connection_pool.rb:930:in `retrieve_connection'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/activerecord-5.1.0/lib/active_record/connection_handling.rb:116:in `retrieve_connection'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/activerecord-5.1.0/lib/active_record/connection_handling.rb:88:in `connection'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/activerecord-5.1.0/lib/active_record/fixtures.rb:516:in `create_fixtures'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/activerecord-5.1.0/lib/active_record/fixtures.rb:1028:in `load_fixtures'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/activerecord-5.1.0/lib/active_record/fixtures.rb:999:in `setup_fixtures'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/activerecord-5.1.0/lib/active_record/fixtures.rb:851:in `before_setup'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-rails-3.6.0/lib/rspec/rails/adapters.rb:126:in `block (2 levels) in <module:MinitestLifecycleAdapter>'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:447:in `instance_exec'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:447:in `instance_exec'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:375:in `execute_with'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:606:in `block (2 levels) in run_around_example_hooks_for'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:342:in `call'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:607:in `run_around_example_hooks_for'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/hooks.rb:464:in `run'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:457:in `with_around_example_hooks'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:500:in `with_around_and_singleton_context_hooks'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example.rb:251:in `run'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:627:in `block in run_examples'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:623:in `map'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:623:in `run_examples'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:589:in `run'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:590:in `block in run'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:590:in `map'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/example_group.rb:590:in `run'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:118:in `block (3 levels) in run_specs'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:118:in `map'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:118:in `block (2 levels) in run_specs'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/configuration.rb:1894:in `with_suite_hooks'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:113:in `block in run_specs'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/reporter.rb:79:in `report'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:112:in `run_specs'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:87:in `run'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:71:in `run'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/lib/rspec/core/runner.rb:45:in `invoke'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/gems/rspec-core-3.6.0/exe/rspec:4:in `<top (required)>'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/bin/rspec:23:in `load'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/bin/rspec:23:in `<main>'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/bin/ruby_executable_hooks:15:in `eval'
# /Users/kukicola/.rvm/gems/ruby-2.4.1/bin/ruby_executable_hooks:15:in `<main>'
#
# Showing full backtrace because every line was filtered out.
# See docs for RSpec::Configuration#backtrace_exclusion_patterns and
# RSpec::Configuration#backtrace_inclusion_patterns for more information.
My rails_helper.rb file:
# This file is copied to spec/ when you run 'rails generate rspec:install'
require 'spec_helper'
ENV['RAILS_ENV'] ||= 'test'
require File.expand_path('../../config/environment', __FILE__)
# Prevent database truncation if the environment is production
abort("The Rails environment is running in production mode!") if Rails.env.production?
require 'rspec/rails'
Mongoid.load!(Rails.root.join("config", "mongoid.yml"))
# Add additional requires below this line. Rails is not loaded until this point!
# Requires supporting ruby files with custom matchers and macros, etc, in
# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
# run as spec files by default. This means that files in spec/support that end
# in _spec.rb will both be required and run as specs, causing the specs to be
# run twice. It is recommended that you do not name files matching this glob to
# end with _spec.rb. You can configure this pattern with the --pattern
# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
#
# The following line is provided for convenience purposes. It has the downside
# of increasing the boot-up time by auto-requiring all files in the support
# directory. Alternatively, in the individual `*_spec.rb` files, manually
# require only the support files necessary.
#
# Dir[Rails.root.join('spec/support/**/*.rb')].each { |f| require f }
# Checks for pending migration and applies them before tests are run.
# If you are not using ActiveRecord, you can remove this line.
#ActiveRecord::Migration.maintain_test_schema!
RSpec.configure do |config|
# Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
#config.fixture_path = "#{::Rails.root}/spec/fixtures"
# If you're not using ActiveRecord, or you'd prefer not to run each of your
# examples within a transaction, remove the following line or assign false
# instead of true.
#config.use_transactional_fixtures = true
# RSpec Rails can automatically mix in different behaviours to your tests
# based on their file location, for example enabling you to call `get` and
# `post` in specs under `spec/controllers`.
#
# You can disable this behaviour by removing the line below, and instead
# explicitly tag your specs with their type, e.g.:
#
# RSpec.describe UsersController, :type => :controller do
# # ...
# end
#
# The different available types are documented in the features, such as in
# https://relishapp.com/rspec/rspec-rails/docs
config.infer_spec_type_from_file_location!
# Filter lines from Rails gems in backtraces.
config.filter_rails_from_backtrace!
# arbitrary gems may also be filtered via:
# config.filter_gems_from_backtrace("gem name")
# config.before(:suite) do
# DatabaseCleaner.clean_with(:truncation)
# end
#
# config.before(:each) do
# DatabaseCleaner.strategy = :truncation
# end
#
# config.before(:each, :js => true) do
# DatabaseCleaner.strategy = :truncation
# end
#
# config.before(:each) do
# DatabaseCleaner.start
# end
#
# config.after(:each) do
# DatabaseCleaner.clean
# end
end
And spec_helper.rb:
# This file was generated by the `rails generate rspec:install` command. Conventionally, all
# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
# The generated `.rspec` file contains `--require spec_helper` which will cause
# this file to always be loaded, without a need to explicitly require it in any
# files.
#
# Given that it is always loaded, you are encouraged to keep this file as
# light-weight as possible. Requiring heavyweight dependencies from this file
# will add to the boot time of your test suite on EVERY test run, even for an
# individual file that may not need all of that loaded. Instead, consider making
# a separate helper file that requires the additional dependencies and performs
# the additional setup, and require it from the spec files that actually need
# it.
#
# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
RSpec.configure do |config|
# rspec-expectations config goes here. You can use an alternate
# assertion/expectation library such as wrong or the stdlib/minitest
# assertions if you prefer.
config.expect_with :rspec do |expectations|
# This option will default to `true` in RSpec 4. It makes the `description`
# and `failure_message` of custom matchers include text for helper methods
# defined using `chain`, e.g.:
# be_bigger_than(2).and_smaller_than(4).description
# # => "be bigger than 2 and smaller than 4"
# ...rather than:
# # => "be bigger than 2"
expectations.include_chain_clauses_in_custom_matcher_descriptions = true
end
# rspec-mocks config goes here. You can use an alternate test double
# library (such as bogus or mocha) by changing the `mock_with` option here.
config.mock_with :rspec do |mocks|
# Prevents you from mocking or stubbing a method that does not exist on
# a real object. This is generally recommended, and will default to
# `true` in RSpec 4.
mocks.verify_partial_doubles = true
end
# This option will default to `:apply_to_host_groups` in RSpec 4 (and will
# have no way to turn it off -- the option exists only for backwards
# compatibility in RSpec 3). It causes shared context metadata to be
# inherited by the metadata hash of host groups and examples, rather than
# triggering implicit auto-inclusion in groups with matching metadata.
config.shared_context_metadata_behavior = :apply_to_host_groups
# The settings below are suggested to provide a good initial experience
# with RSpec, but feel free to customize to your heart's content.
=begin
# This allows you to limit a spec run to individual examples or groups
# you care about by tagging them with `:focus` metadata. When nothing
# is tagged with `:focus`, all examples get run. RSpec also provides
# aliases for `it`, `describe`, and `context` that include `:focus`
# metadata: `fit`, `fdescribe` and `fcontext`, respectively.
config.filter_run_when_matching :focus
# Allows RSpec to persist some state between runs in order to support
# the `--only-failures` and `--next-failure` CLI options. We recommend
# you configure your source control system to ignore this file.
config.example_status_persistence_file_path = "spec/examples.txt"
# Limits the available syntax to the non-monkey patched syntax that is
# recommended. For more details, see:
# - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
# - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
# - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
config.disable_monkey_patching!
# Many RSpec users commonly either run the entire suite or an individual
# file, and it's useful to allow more verbose output when running an
# individual spec file.
if config.files_to_run.one?
# Use the documentation formatter for detailed output,
# unless a formatter has already been configured
# (e.g. via a command-line flag).
config.default_formatter = "doc"
end
# Print the 10 slowest examples and example groups at the
# end of the spec run, to help surface which specs are running
# particularly slow.
config.profile_examples = 10
# Run specs in random order to surface order dependencies. If you find an
# order dependency and want to debug it, you can fix the order by providing
# the seed, which is printed after each run.
# --seed 1234
config.order = :random
# Seed global randomization in this process using the `--seed` CLI option.
# Setting this allows you to use `--seed` to deterministically reproduce
# test failures related to randomization by passing the same `--seed` value
# as the one that triggered the failure.
Kernel.srand config.seed
=end
end
Problem solved - I had bad carrier_wave config which was loading active record
I am trying to setup rspec (v3.0.2) on Rails 4.1.9 with factory_girl_rails but after implementing rails_helper.rb and spec_helper.rb I get the following error when running my _spec.rb file:
/Users/user/.rvm/gems/ruby-2.2.1/gems/activerecord-4.1.9/lib/active_record/attribute_methods.rb:9:in `<module:AttributeMethods>': uninitialized constant ActiveModel::AttributeMethods (NameError)
from /Users/user/.rvm/gems/ruby-2.2.1/gems/activerecord-4.1.9/lib/active_record/attribute_methods.rb:7:in `<module:ActiveRecord>'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/activerecord-4.1.9/lib/active_record/attribute_methods.rb:5:in `<top (required)>'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/activerecord-4.1.9/lib/active_record.rb:101:in `<module:ActiveRecord>'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/activerecord-4.1.9/lib/active_record.rb:31:in `<top (required)>'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/activerecord-4.1.9/lib/active_record/railtie.rb:1:in `require'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/activerecord-4.1.9/lib/active_record/railtie.rb:1:in `<top (required)>'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/railties-4.1.9/lib/rails/all.rb:12:in `require'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/railties-4.1.9/lib/rails/all.rb:12:in `block in <top (required)>'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/railties-4.1.9/lib/rails/all.rb:10:in `each'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/railties-4.1.9/lib/rails/all.rb:10:in `<top (required)>'
from /Users/user/code/rtb-campaign-optimization/config/application.rb:3:in `require'
from /Users/user/code/rtb-campaign-optimization/config/application.rb:3:in `<top (required)>'
from /Users/user/code/rtb-campaign-optimization/config/environment.rb:2:in `require'
from /Users/user/code/rtb-campaign-optimization/config/environment.rb:2:in `<top (required)>'
from /Users/user/code/rtb-campaign-optimization/spec/rails_helper.rb:4:in `require'
from /Users/user/code/rtb-campaign-optimization/spec/rails_helper.rb:4:in `<top (required)>'
from /Users/user/code/rtb-campaign-optimization/spec/models/cpa_calculator_spec.rb:1:in `require'
from /Users/user/code/rtb-campaign-optimization/spec/models/cpa_calculator_spec.rb:1:in `<top (required)>'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/configuration.rb:1058:in `load'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/configuration.rb:1058:in `block in load_spec_files'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/configuration.rb:1058:in `each'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/configuration.rb:1058:in `load_spec_files'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/runner.rb:97:in `setup'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/runner.rb:85:in `run'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/runner.rb:70:in `run'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/lib/rspec/core/runner.rb:38:in `invoke'
from /Users/user/.rvm/gems/ruby-2.2.1/gems/rspec-core-3.0.4/exe/rspec:4:in `<top (required)>'
from /Users/user/.rvm/gems/ruby-2.2.1/bin/rspec:23:in `load'
from /Users/user/.rvm/gems/ruby-2.2.1/bin/rspec:23:in `<main>'
from /Users/user/.rvm/gems/ruby-2.2.1/bin/ruby_executable_hooks:15:in `eval'
from /Users/user/.rvm/gems/ruby-2.2.1/bin/ruby_executable_hooks:15:in `<main>'
Here is my gemfile:
group :development do
gem 'rails-dev-tweaks'
gem 'quiet_assets'
gem 'pry'
gem 'pry-byebug'
gem 'hirb'
gem 'spring'
gem 'spring-commands-rspec'
end
group :development, :test do
gem 'rspec-rails', '~> 3.0.0'
gem 'factory_girl_rails'
end
group :test do
gem 'database_cleaner'
end
rails_helper.rb:
# This file is copied to spec/ when you run 'rails generate rspec:install'
ENV["RAILS_ENV"] ||= 'test'
require 'spec_helper'
require File.expand_path("../../config/environment", __FILE__)
require 'rspec/rails'
# Requires supporting ruby files with custom matchers and macros, etc, in
# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
# run as spec files by default. This means that files in spec/support that end
# in _spec.rb will both be required and run as specs, causing the specs to be
# run twice. It is recommended that you do not name files matching this glob to
# end with _spec.rb. You can configure this pattern with the --pattern
# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
# Checks for pending migrations before tests are run.
# If you are not using ActiveRecord, you can remove this line.
ActiveRecord::Migration.maintain_test_schema!
RSpec.configure do |config|
# Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
config.fixture_path = "#{::Rails.root}/spec/fixtures"
# If you're not using ActiveRecord, or you'd prefer not to run each of your
# examples within a transaction, remove the following line or assign false
# instead of true.
config.use_transactional_fixtures = true
# RSpec Rails can automatically mix in different behaviours to your tests
# based on their file location, for example enabling you to call `get` and
# `post` in specs under `spec/controllers`.
#
# You can disable this behaviour by removing the line below, and instead
# explicitly tag your specs with their type, e.g.:
#
# RSpec.describe UsersController, :type => :controller do
# # ...
# end
#
# The different available types are documented in the features, such as in
# https://relishapp.com/rspec/rspec-rails/docs
config.infer_spec_type_from_file_location!
end
spec_helper.rb:
RSpec.configure do |config|
# The settings below are suggested to provide a good initial experience
# with RSpec, but feel free to customize to your heart's content.
# These two settings work together to allow you to limit a spec run
# to individual examples or groups you care about by tagging them with
# `:focus` metadata. When nothing is tagged with `:focus`, all examples
# get run.
config.filter_run :focus
config.run_all_when_everything_filtered = true
# Many RSpec users commonly either run the entire suite or an individual
# file, and it's useful to allow more verbose output when running an
# individual spec file.
if config.files_to_run.one?
# Use the documentation formatter for detailed output,
# unless a formatter has already been configured
# (e.g. via a command-line flag).
config.default_formatter = 'doc'
end
# Print the 10 slowest examples and example groups at the
# end of the spec run, to help surface which specs are running
# particularly slow.
config.profile_examples = 10
# Run specs in random order to surface order dependencies. If you find an
# order dependency and want to debug it, you can fix the order by providing
# the seed, which is printed after each run.
# --seed 1234
config.order = :random
# Seed global randomization in this process using the `--seed` CLI option.
# Setting this allows you to use `--seed` to deterministically reproduce
# test failures related to randomization by passing the same `--seed` value
# as the one that triggered the failure.
Kernel.srand config.seed
# rspec-expectations config goes here. You can use an alternate
# assertion/expectation library such as wrong or the stdlib/minitest
# assertions if you prefer.
config.expect_with :rspec do |expectations|
# Enable only the newer, non-monkey-patching expect syntax.
# For more details, see:
# - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
expectations.syntax = :expect
end
# rspec-mocks config goes here. You can use an alternate test double
# library (such as bogus or mocha) by changing the `mock_with` option here.
config.mock_with :rspec do |mocks|
# Enable only the newer, non-monkey-patching expect syntax.
# For more details, see:
# - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
mocks.syntax = :expect
# Prevents you from mocking or stubbing a method that does not exist on
# a real object. This is generally recommended.
mocks.verify_partial_doubles = true
end
end
my _spec file:
require 'rails_helper'
describe 'CampaignsManagement::CpaCalculator' do
let(:campaign) {
camp = FactoryGirl.build_stubbed(:campaign)
# campaign_histories_per_campaigns.times.each do |index|
# Factory.build(:campaign_history, value: index + 1, campaign_id: camp.id)
# end
camp
}
context "when there are some active campaigns" do
context "when the campaign have histories" do
let(:campaign_histories_per_campaigns) { 10 }
context 'when the campaign have histories created today' do
end
context 'when the campaign has only histories in the past (not generated today)' do
end
end
context "when the campaign is histories orphaned" do
let(:campaign_histories_per_campaigns) { 0 }
it "should not update redshift" do
campaign.campaign_histories.size.should.eq(0)
end
end
end
end
application.rb:
require File.expand_path('../boot', __FILE__)
require 'rails/all'
# Require the gems listed in Gemfile, including any gems
# you've limited to :test, :development, or :production.
Bundler.require(*Rails.groups)
module RtbCampaignOptimization
class Application < Rails::Application
config.assets.enabled = false
# Settings in config/environments/* take precedence over those specified here.
# Application configuration should go into files in config/initializers
# -- all .rb files in that directory are automatically loaded.
# Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
# Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
# config.time_zone = 'Central Time (US & Canada)'
# The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
# config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
# config.i18n.default_locale = :de
config.autoload_paths << Rails.root.join('lib')
end
end
any ideas?
Thanks
Try to run:
rails generate rspec:install //which you must have already run
bundle install
And also check out this question and it's answers
According to the above, you need to add spork-rails to your Gemfile.
All the above-shared code snippets all look good.
I have been trying to use RSpec with Rails 4 but came across this error that I can't get rid of.
However, when I run test on single *.rb files it works without any errors. I use guard and have tried to run rspec in single mode but received the same error.
13:46:26 - INFO - Running: spec
/Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/railties-4.0.0/lib/rails/application.rb:214:in `initialize!': Application has been already initialized. (RuntimeError)
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/railties-4.0.0/lib/rails/railtie/configurable.rb:30:in `method_missing'
from /Users/xxx/Documents/Mitt_bolag/Minnesota/beställningssite/order_site/config/environment.rb:5:in `<top (required)>'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `require'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `block in require'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:213:in `load_dependency'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `require'
from /Users/xxx/Documents/Mitt_bolag/Minnesota/beställningssite/order_site/spec/spec_helper.rb:3:in `<top (required)>'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `require'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `block in require'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:213:in `load_dependency'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:228:in `require'
from /Users/xxx/Documents/Mitt_bolag/Minnesota/beställningssite/order_site/spec/requests/products_spec.rb:1:in `<top (required)>'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:222:in `load'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:222:in `block in load'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:213:in `load_dependency'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/activesupport-4.0.0/lib/active_support/dependencies.rb:222:in `load'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rspec-core-2.14.5/lib/rspec/core/configuration.rb:896:in `block in load_spec_files'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rspec-core-2.14.5/lib/rspec/core/configuration.rb:896:in `each'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rspec-core-2.14.5/lib/rspec/core/configuration.rb:896:in `load_spec_files'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rspec-core-2.14.5/lib/rspec/core/command_line.rb:22:in `run'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rspec-core-2.14.5/lib/rspec/core/runner.rb:80:in `run'
from /Users/xxx/.rbenv/versions/2.0.0-p0/lib/ruby/gems/2.0.0/gems/rspec-core-2.14.5/lib/rspec/core/runner.rb:17:in `block in autorun'
This is my spec_helper.rb
# This file is copied to spec/ when you run 'rails generate rspec:install'
ENV["RAILS_ENV"] ||= 'test'
require File.expand_path("../../config/environment", __FILE__)
require 'rspec/rails'
require 'rspec/autorun'
require 'capybara/rspec'
# Requires supporting ruby files with custom matchers and macros, etc,
# in spec/support/ and its subdirectories.
Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
# Checks for pending migrations before tests are run.
# If you are not using ActiveRecord, you can remove this line.
ActiveRecord::Migration.check_pending! if defined?(ActiveRecord::Migration)
RSpec.configure do |config|
# ## Mock Framework
#
# If you prefer to use mocha, flexmock or RR, uncomment the appropriate line:
#
# config.mock_with :mocha
# config.mock_with :flexmock
# config.mock_with :rr
# Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
# config.fixture_path = "#{::Rails.root}/spec/fixtures"
# If you're not using ActiveRecord, or you'd prefer not to run each of your
# examples within a transaction, remove the following line or assign false
# instead of true.
config.use_transactional_fixtures = true
# If true, the base class of anonymous controllers will be inferred
# automatically. This will be the default behavior in future versions of
# rspec-rails.
config.infer_base_class_for_anonymous_controllers = false
# Run specs in random order to surface order dependencies. If you find an
# order dependency and want to debug it, you can fix the order by providing
# the seed, which is printed after each run.
# --seed 1234
config.order = "random"
config.include Devise::TestHelpers, :type => :controller
end
class ActionController::TestCase
include Devise::TestHelpers
end
I ran into this problem while upgrading a Rails 4.2 and Ruby 2.2 app to Rails 4.2 and Rails 2.6. Apparently, ActionController::TestResponse is reused and therefore initialized multiple times. You can add a workaround reading this thread, or simply create spec/support/action_controller_workaround.rb:
if RUBY_VERSION>='2.6.0'
if Rails.version < '5'
class ActionController::TestResponse < ActionDispatch::TestResponse
def recycle!
# hack to avoid MonitorMixin double-initialize error:
#mon_mutex_owner_object_id = nil
#mon_mutex = nil
initialize
end
end
else
puts "Monkeypatch for ActionController::TestResponse no longer needed"
end
end
Try setting your spec_helper to this:
# This file is copied to spec/ when you run 'rails generate rspec:install'
ENV["RAILS_ENV"] ||= 'test'
require File.expand_path("../../config/environment", __FILE__)
require 'rspec/rails'
require 'rspec/autorun'
require 'capybara/rspec' # NOTE: I DON'T have this but you do...
Dir[Rails.root.join("spec/support/**/*.rb")].each {|f| require f}
RSpec.configure do |config|
config.fixture_path = "#{::Rails.root}/spec/fixtures"
config.use_transactional_fixtures = true
config.infer_base_class_for_anonymous_controllers = false
end
I don't know if you've already got the solution, but here I go anyway:
I'm facing the same problem since yesterday. I've found that running a
single spec by time or removing the 'require "spec_helper" from all specs but one,
it would work.
And a few minutes ago, I've found that the problem was the ruby version.
If you upgrade your ruby-2.0.0-p0 to ruby-2.0.0-p247, then the problem goes away!
I hope I've been helpful.
There's quite a few solid tutorials out there, and I haven't had too much trouble getting this working in the past. But, after hours of trying, I must be missing something.
I've completed the standard installation instructions, and started up the spork server:
Using RSpec
Preloading Rails environment
Loading Spork.prefork block...
Spork is ready and listening on 8989!
Looking good.
Then, I hop over to a new tab and run my specs:
$ rspec spec
This command returns nothing after running for only a split second. So I jump back to the spork server to see what happened and get:
Using RSpec
Preloading Rails environment
Loading Spork.prefork block...
Spork is ready and listening on 8989!
Running tests with args ["--color", "spec"]...
Exception encountered: #<DRb::DRbConnError: druby://localhost:56736 - #<Errno::ECONNREFUSED: Connection refused - connect(2)>>
backtrace:
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:736:in `rescue in block in open'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:730:in `block in open'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:729:in `each'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:729:in `open'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1191:in `initialize'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1171:in `new'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1171:in `open'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1087:in `block in method_missing'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1105:in `with_friend'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1086:in `method_missing'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1074:in `respond_to?'
/Users/briancody/.rvm/gems/ruby-1.9.3-p0#scholastica/gems/spork-0.9.0.rc9/lib/spork/run_strategy/forking.rb:10:in `block in run'
/Users/briancody/.rvm/gems/ruby-1.9.3-p0#scholastica/gems/spork-0.9.0.rc9/lib/spork/forker.rb:21:in `block in initialize'
/Users/briancody/.rvm/gems/ruby-1.9.3-p0#scholastica/gems/spork-0.9.0.rc9/lib/spork/forker.rb:18:in `fork'
/Users/briancody/.rvm/gems/ruby-1.9.3-p0#scholastica/gems/spork-0.9.0.rc9/lib/spork/forker.rb:18:in `initialize'
/Users/briancody/.rvm/gems/ruby-1.9.3-p0#scholastica/gems/spork-0.9.0.rc9/lib/spork/run_strategy/forking.rb:9:in `new'
/Users/briancody/.rvm/gems/ruby-1.9.3-p0#scholastica/gems/spork-0.9.0.rc9/lib/spork/run_strategy/forking.rb:9:in `run'
/Users/briancody/.rvm/gems/ruby-1.9.3-p0#scholastica/gems/spork-0.9.0.rc9/lib/spork/server.rb:48:in `run'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1548:in `perform_without_block'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1508:in `perform'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1586:in `block (2 levels) in main_loop'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1582:in `loop'
/Users/briancody/.rvm/rubies/ruby-1.9.3-p0/lib/ruby/1.9.1/drb/drb.rb:1582:in `block in main_loop'
Done.
For some reason, drb is failing to connect? I've googled like crazy, but there just doesn't seem to be anything helpful out there.
Some possible clues
The port (in this case 56736) changes every time I attempt to run the suite
I get the same result on both ruby 1.9.2 and ruby 1.9.3
I'm using a mac (snow leopard) and firewalls are disabled
I've tried it on a totally different mac (also snow leopard) with the same result.
I'm using the latest version of cucumber, rspec, and spork.
I also setup cucumber spork and it failed the same way.
As you can see, I've been banging away at it for a while. My project uses a lot of gems and not having spork makes testing really, really terrible. Please help...
UPDATE
Here's my spec_helper:
require 'spork'
Spork.prefork do
ENV["RAILS_ENV"] ||= 'test'
require File.expand_path("../../config/environment", __FILE__)
require 'rspec/rails'
require "email_spec"
require 'webmock/rspec'
require 'vcr'
require 'database_cleaner'
include Devise::TestHelpers
include EmailSpec::Helpers
include EmailSpec::Matchers
# Stub all updates to search indexes
class Profile
def update_tank_indexes ; end
def delete_tank_indexes ; end
end
class Journal
def update_tank_indexes ; end
end
# Apparently rspec doesn't understand <tt>main_app</tt> so stub it out.
def main_app ; self ; end
# Requires supporting ruby files with custom matchers and macros, etc,
# in spec/support/ and its subdirectories.
Dir[Rails.root.join("spec/support/**/*.rb")].each {|f| require f}
RSpec.configure do |config|
config.mock_with :rspec
# If you're not using ActiveRecord, or you'd prefer not to run each of your
# examples within a transaction, remove the following line or assign false
# instead of true.
config.use_transactional_fixtures = true
config.extend VCR::RSpec::Macros
# Always clean the database after running describe/context blocks to ensure a
# consistent state. This is especially important when using the <tt>rspec-set</tt>
# method. This method creates setup object once -- and only once -- proir to
# running an entire describe/context block. In this way, it's similar to using
# <tt>before(:all)</tt> except that <tt>set</tt> is better because:
#
# * It automatically reloads the object before each example, making it much
# safer than before(:all) which can cause bugs if you're not careful.
# * It's lazily evaluated.
#
# You can read more at:
#
# * eggsonbread.com/2010/05/25/speed-up-your-specs-with-set/
# * github.com/pcreux/rspec-set
#
# Note: This is not part of default configuration. Be sure to retain this snippet
# when upgrading.
#
DatabaseCleaner.strategy = :truncation
config.before(:all) do
DatabaseCleaner.clean
end
config.after(:suite) do
DatabaseCleaner.clean
end
end
end
Spork.each_run do
# This code will be run each time you run your specs.
end
I opened a ticket for this issue, but nothing has come of it in the last 3.5 months: https://github.com/sporkrb/spork/issues/133
Update: I found the solution, and reported everything to that ticket. tl;dr: change your Gemfile entry for 'always_validate_ssl_certifitcates' to include :require => false.
Can you roll back to spork 0.8.5 and see if it works? I've just verified that working.