In my Rails project, I have a model class Employee < ActiveRecord::Base, the class has an attribute called compensation, it is a :jsonb data type in Postgresql.
create_table "employee" do |t|
...
t.jsonb "compensation"
...
end
The compensation contains salary, working_hours, start_from, and etc
compensation : {
salary: 50000,
working_hours: 230,
start_from: 2018-12-21,
...
}
What I wanna do is that before an instance of Employee being rendered as JSON and response to the front-end, I need to remove the salary attribute in the compensation. In employee_controller I tried to use
def get_without_salary
employee = Employee.find 2
employee.compensation.delete :salary
jsonapi_render json: employee
end
but the result JSON still contains the salary data.
I can only make it works by:
temp_compensation = employee.compensation.dup
temp_compensation.delete :salary
employee.compensation = temp_compensation
but it is too ugly and confused me why the first way failed.
Can someone explain to me why? Thanks
This seems a rather tricky question. The options for as_json are the following:
includes: => used to include has_many and belongs_to associations
methods: => to include the result of a class method of the model
except: => prevent columns from showig
only: => only show specified columns
I tried some of them to specify only some attributes of the jsonb column but they either dont work or throw a NoMethodError: undefined method 'serializable_hash' for #<Hash:0x00000005082eb0> showing that it tries to serialize your jsonb but fails.
I think a clean way of doing it may be to have a method filtered_compensation in your model where you define the json you want to send and prevent compensation from showing.
def get_without_salary
employee = Employee.find 2
jsonapi_render json: employee.as_json(methods: [:filtered_compensation], except: [:compensation])
end
Where filtered_compensation is declared in your model
def filtered_compensation
compensation.except 'salary'
end
I think it complies with being clean, separating concerns and makes your method filtered_compensation to be used elsewhere.
Note that instead of having in your response the attribute compensation, you would find filtered_compensation as that is the name of the method.
After a few days thinking, I came up the solution that first converts the active_record instance into a hash, then delete the salary in the hash, and then converts the hash into an active_record instance. This is a better solution comparing to mutating an object on the fly.
def get_without_salary
employee = Employee.find 2
filtered_employee = filter_salary employee
jsonapi_render json: filtered_employee
end
def filter_salary(employee)
record_hash = employee.as_json.deep_symbolize_keys!
record_hash[:compensation]&.delete :salary
Employee.new(record_hash)
end
I've been looking for a while for gems and/or plugins that implement static storage similar ActiveRecords but is not database-based. Let's call this class NonDBRecord. It should have the following property:
class Foo < NonDBRecord
add_item('a', :property1 => 'some value', :property2 => 'some more value')
add_item('b', :property1 => 'some value', :property2 => 'some more value')
end
class Bar < ActiveRecord::Base
belongs_to_nondbrecord :foo, :class_name => 'Foo'
end
# NonDBRecord declare constants automatically
[ Foo::A, Foo::B ]
# NonDBRecord is enumerable
Foo.all # returns [Foo::A,Foo::B]
# NonDBRecord is id-based
Bar.create(:foo_id => Foo::A.id)
# ...so you can search by it
x = Bar.find(:first, :conditions => { :foo_id => Foo::A.id })
# ...and is stored, retrieved, and instantiated by its id
x.foo # returns Foo::A
I've thought about simply using ActiveRecords (and database storage), but I don't feel good about it. Plus I've had to tip-toe around some eager loading problems with the ActiveRecord solution. Any help would be appreciated before I start writing my own solution.
edit
These records are meant to be enumerations. For example, let's say you're making a card game. I want to be able to do something like
class Card < NonDBRecord
attr_reader :suit, :index
end
class Game
belongs_to :wild_card, :class_name => 'Card'
end
I would say ActiveModel is what you are looking for. It comes with Rails 3 and encapsulates all kind of goodies from ActiveRecord, such as Validation, Serialization and sorts. There is a Ryan Bates railscast on that issue. Hope this helps!
As BigD says, ActiveModel is the Rails 3 way.
In Rails 2.3 I am using this as a kluge:
class TablelessModel < ActiveRecord::Base
def self.columns() #columns ||= []; end
def self.column(name, sql_type = nil, default = nil, null = true)
columns << ActiveRecord::ConnectionAdapters::Column.new(name.to_s, default, sql_type.to_s, null)
end
def save(validate = true)
validate ? valid? : true
end
end
I use that to e.g. validate contact forms that are not going to persist in any way. It's possible it could be extended for your specific purposes.
I have a data object which is composed_of three child instances of the same object. I need to calculate a value from that object and save it in the database. (It is later pulled form the db by another application.)
I've mocked out my class structure below, basically I want a method that will add together the Child values data_one and data_two, and store it into a third variable, total. Which I guess will be total_first, total_second and total_third in the db Parent table. Should I declare total as a Child attribute and use a callback to set it? Any help will be much appreciated - thank you! And apologies if this is a really obvious question...
class Child
attr_reader :data_one, :data_two
def initialize(data_one, data_two)
#data_one, #data_two,
end
def ==(other_child)
data_one == other_child.data_one &&
data_two == other_child.data_two
end
def Sdq.from_params(hash)
Sdq.new(
get_value(hash, :data_one),
get_value(hash, :data_two),
)
end
protected
def Sdq.get_value(hash, key)
hash.has_key?(key) ? hash[key] : hash[key.to_s]
end
end
class Parent < ActiveRecord::Base
composed_of :first_child, :class_name => "Child", :mapping => [
["data_one_first","data_one"],
["data_two_first","data_two"]
]
composed_of :second_child, :class_name => "Child", :mapping => [
["data_one_second","data_one"],
["data_two_second","data_two"]
]
composed_of :third_child, :class_name => "Child", :mapping => [
["data_one_third","data_one"],
["data_two_third","data_two"]
]
end
I can't imagine why a parent will always have exactly two children, why not a many_to_x relation? depending if you need many to many. Hopefully not seeing the example.
You must have your reasons.
I would use call backs like you described. Maybe before_validations and have some validation on it. Note, that returning a non-true value in a callback can result in the record not saving.
E.G If the condition is false, the method returns nil and can halt the save callback chain.
def before_save
if something_sometimes_is_false
#do normal code
end # could not run, which would return nil and break things
end
consider returning self at the end.
def before_save
if something_sometimes_is_false
# do normal code
end
self # should always be a true value in an instance of a class. will not break call backs
end
How can I set default value in ActiveRecord?
I see a post from Pratik that describes an ugly, complicated chunk of code: http://m.onkey.org/2007/7/24/how-to-set-default-values-in-your-model
class Item < ActiveRecord::Base
def initialize_with_defaults(attrs = nil, &block)
initialize_without_defaults(attrs) do
setter = lambda { |key, value| self.send("#{key.to_s}=", value) unless
!attrs.nil? && attrs.keys.map(&:to_s).include?(key.to_s) }
setter.call('scheduler_type', 'hotseat')
yield self if block_given?
end
end
alias_method_chain :initialize, :defaults
end
I have seen the following examples googling around:
def initialize
super
self.status = ACTIVE unless self.status
end
and
def after_initialize
return unless new_record?
self.status = ACTIVE
end
I've also seen people put it in their migration, but I'd rather see it defined in the model code.
Is there a canonical way to set default value for fields in ActiveRecord model?
There are several issues with each of the available methods, but I believe that defining an after_initialize callback is the way to go for the following reasons:
default_scope will initialize values for new models, but then that will become the scope on which you find the model. If you just want to initialize some numbers to 0 then this is not what you want.
Defining defaults in your migration also works part of the time... As has already been mentioned this will not work when you just call Model.new.
Overriding initialize can work, but don't forget to call super!
Using a plugin like phusion's is getting a bit ridiculous. This is ruby, do we really need a plugin just to initialize some default values?
Overriding after_initialize is deprecated as of Rails 3. When I override after_initialize in rails 3.0.3 I get the following warning in the console:
DEPRECATION WARNING: Base#after_initialize has been deprecated, please use Base.after_initialize :method instead. (called from /Users/me/myapp/app/models/my_model:15)
Therefore I'd say write an after_initialize callback, which lets you default attributes in addition to letting you set defaults on associations like so:
class Person < ActiveRecord::Base
has_one :address
after_initialize :init
def init
self.number ||= 0.0 #will set the default value only if it's nil
self.address ||= build_address #let's you set a default association
end
end
Now you have just one place to look for initialization of your models. I'm using this method until someone comes up with a better one.
Caveats:
For boolean fields do:
self.bool_field = true if self.bool_field.nil?
See Paul Russell's comment on this answer for more details
If you're only selecting a subset of columns for a model (ie; using select in a query like Person.select(:firstname, :lastname).all) you will get a MissingAttributeError if your init method accesses a column that hasn't been included in the select clause. You can guard against this case like so:
self.number ||= 0.0 if self.has_attribute? :number
and for a boolean column...
self.bool_field = true if (self.has_attribute? :bool_value) && self.bool_field.nil?
Also note that the syntax is different prior to Rails 3.2 (see Cliff Darling's comment below)
Rails 5+
You can use the attribute method within your models, eg.:
class Account < ApplicationRecord
attribute :locale, :string, default: 'en'
end
You can also pass a lambda to the default parameter. Example:
attribute :uuid, :string, default: -> { SecureRandom.uuid }
The second argument is the type and it can also be a custom type class instance, for example:
attribute :uuid, UuidType.new, default: -> { SecureRandom.uuid }
We put the default values in the database through migrations (by specifying the :default option on each column definition) and let Active Record use these values to set the default for each attribute.
IMHO, this approach is aligned with the principles of AR : convention over configuration, DRY, the table definition drives the model, not the other way around.
Note that the defaults are still in the application (Ruby) code, though not in the model but in the migration(s).
Some simple cases can be handled by defining a default in the database schema but that doesn't handle a number of trickier cases including calculated values and keys of other models. For these cases I do this:
after_initialize :defaults
def defaults
unless persisted?
self.extras||={}
self.other_stuff||="This stuff"
self.assoc = [OtherModel.find_by_name('special')]
end
end
I've decided to use the after_initialize but I don't want it to be applied to objects that are found only those new or created. I think it is almost shocking that an after_new callback isn't provided for this obvious use case but I've made do by confirming whether the object is already persisted indicating that it isn't new.
Having seen Brad Murray's answer this is even cleaner if the condition is moved to callback request:
after_initialize :defaults, unless: :persisted?
# ":if => :new_record?" is equivalent in this context
def defaults
self.extras||={}
self.other_stuff||="This stuff"
self.assoc = [OtherModel.find_by_name('special')]
end
The after_initialize callback pattern can be improved by simply doing the following
after_initialize :some_method_goes_here, :if => :new_record?
This has a non-trivial benefit if your init code needs to deal with associations, as the following code triggers a subtle n+1 if you read the initial record without including the associated.
class Account
has_one :config
after_initialize :init_config
def init_config
self.config ||= build_config
end
end
The Phusion guys have some nice plugin for this.
An even better/cleaner potential way than the answers proposed is to overwrite the accessor, like this:
def status
self['status'] || ACTIVE
end
See "Overwriting default accessors" in the ActiveRecord::Base documentation and more from StackOverflow on using self.
I use the attribute-defaults gem
From the documentation:
run sudo gem install attribute-defaults and add require 'attribute_defaults' to your app.
class Foo < ActiveRecord::Base
attr_default :age, 18
attr_default :last_seen do
Time.now
end
end
Foo.new() # => age: 18, last_seen => "2014-10-17 09:44:27"
Foo.new(:age => 25) # => age: 25, last_seen => "2014-10-17 09:44:28"
Similar questions, but all have slightly different context:
- How do I create a default value for attributes in Rails activerecord's model?
Best Answer: Depends on What You Want!
If you want every object to start with a value: use after_initialize :init
You want the new.html form to have a default value upon opening the page? use https://stackoverflow.com/a/5127684/1536309
class Person < ActiveRecord::Base
has_one :address
after_initialize :init
def init
self.number ||= 0.0 #will set the default value only if it's nil
self.address ||= build_address #let's you set a default association
end
...
end
If you want every object to have a value calculated from user input: use before_save :default_values
You want user to enter X and then Y = X+'foo'? use:
class Task < ActiveRecord::Base
before_save :default_values
def default_values
self.status ||= 'P'
end
end
I've also seen people put it in their migration, but I'd rather see it
defined in the model code.
Is there a canonical way to set default value for fields in
ActiveRecord model?
The canonical Rails way, before Rails 5, was actually to set it in the migration, and just look in the db/schema.rb for whenever wanting to see what default values are being set by the DB for any model.
Contrary to what #Jeff Perrin answer states (which is a bit old), the migration approach will even apply the default when using Model.new, due to some Rails magic. Verified working in Rails 4.1.16.
The simplest thing is often the best. Less knowledge debt and potential points of confusion in the codebase. And it 'just works'.
class AddStatusToItem < ActiveRecord::Migration
def change
add_column :items, :scheduler_type, :string, { null: false, default: "hotseat" }
end
end
Or, for column change without creating a new one, then do either:
class AddStatusToItem < ActiveRecord::Migration
def change
change_column_default :items, :scheduler_type, "hotseat"
end
end
Or perhaps even better:
class AddStatusToItem < ActiveRecord::Migration
def change
change_column :items, :scheduler_type, :string, default: "hotseat"
end
end
Check the official RoR guide for options in column change methods.
The null: false disallows NULL values in the DB, and, as an added benefit, it also updates so that all pre-existing DB records that were previously null is set with the default value for this field as well. You may exclude this parameter in the migration if you wish, but I found it very handy!
The canonical way in Rails 5+ is, as #Lucas Caton said:
class Item < ActiveRecord::Base
attribute :scheduler_type, :string, default: 'hotseat'
end
This is what constructors are for! Override the model's initialize method.
Use the after_initialize method.
Sup guys, I ended up doing the following:
def after_initialize
self.extras||={}
self.other_stuff||="This stuff"
end
Works like a charm!
Rails 6.1+
You can now use the attribute method on your model without setting a type.
attribute :status, default: ACTIVE
or
class Account < ApplicationRecord
attribute :locale, default: 'en'
end
Note that feeding a default to attribute cannot reference the instance of the class (a lambda will execute in the context of the class, not the instance). So, if you need to set the default to a value dynamically based on the instance or associations, you're still going to have to use an alternative, such as an after_initialize callback. As stated previously, it's recommended to limit this to new records only to avoid n+1 queries if you reference associations.
after_initialize :do_something_that_references_instance_or_associations, if: :new_record?
This has been answered for a long time, but I need default values frequently and prefer not to put them in the database. I create a DefaultValues concern:
module DefaultValues
extend ActiveSupport::Concern
class_methods do
def defaults(attr, to: nil, on: :initialize)
method_name = "set_default_#{attr}"
send "after_#{on}", method_name.to_sym
define_method(method_name) do
if send(attr)
send(attr)
else
value = to.is_a?(Proc) ? to.call : to
send("#{attr}=", value)
end
end
private method_name
end
end
end
And then use it in my models like so:
class Widget < ApplicationRecord
include DefaultValues
defaults :category, to: 'uncategorized'
defaults :token, to: -> { SecureRandom.uuid }
end
I ran into problems with after_initialize giving ActiveModel::MissingAttributeError errors when doing complex finds:
eg:
#bottles = Bottle.includes(:supplier, :substance).where(search).order("suppliers.name ASC").paginate(:page => page_no)
"search" in the .where is hash of conditions
So I ended up doing it by overriding initialize in this way:
def initialize
super
default_values
end
private
def default_values
self.date_received ||= Date.current
end
The super call is necessary to make sure the object initializing correctly from ActiveRecord::Base before doing my customize code, ie: default_values
after_initialize method is deprecated, use the callback instead.
after_initialize :defaults
def defaults
self.extras||={}
self.other_stuff||="This stuff"
end
however, using :default in your migrations is still the cleanest way.
The problem with the after_initialize solutions is that you have to add an after_initialize to every single object you look up out of the DB, regardless of whether you access this attribute or not. I suggest a lazy-loaded approach.
The attribute methods (getters) are of course methods themselves, so you can override them and provide a default. Something like:
Class Foo < ActiveRecord::Base
# has a DB column/field atttribute called 'status'
def status
(val = read_attribute(:status)).nil? ? 'ACTIVE' : val
end
end
Unless, like someone pointed out, you need to do Foo.find_by_status('ACTIVE'). In that case I think you'd really need to set the default in your database constraints, if the DB supports it.
class Item < ActiveRecord::Base
def status
self[:status] or ACTIVE
end
before_save{ self.status ||= ACTIVE }
end
I strongly suggest using the "default_value_for" gem: https://github.com/FooBarWidget/default_value_for
There are some tricky scenarios that pretty much require overriding the initialize method, which that gem does.
Examples:
Your db default is NULL, your model/ruby-defined default is "some string", but you actually want to set the value to nil for whatever reason: MyModel.new(my_attr: nil)
Most solutions here will fail to set the value to nil, and will instead set it to the default.
OK, so instead of taking the ||= approach, you switch to my_attr_changed?...
BUT now imagine your db default is "some string", your model/ruby-defined default is "some other string", but under a certain scenario, you want to set the value to "some string" (the db default): MyModel.new(my_attr: 'some_string')
This will result in my_attr_changed? being false because the value matches the db default, which in turn will fire your ruby-defined default code and set the value to "some other string" -- again, not what you desired.
For those reasons I don't think this can properly be accomplished with just an after_initialize hook.
Again, I think the "default_value_for" gem is taking the right approach: https://github.com/FooBarWidget/default_value_for
Although doing that for setting default values is confusing and awkward in most cases, you can use :default_scope as well. Check out squil's comment here.
I've found that using a validation method provides a lot of control over setting defaults. You can even set defaults (or fail validation) for updates. You even set a different default value for inserts vs updates if you really wanted to.
Note that the default won't be set until #valid? is called.
class MyModel
validate :init_defaults
private
def init_defaults
if new_record?
self.some_int ||= 1
elsif some_int.nil?
errors.add(:some_int, "can't be blank on update")
end
end
end
Regarding defining an after_initialize method, there could be performance issues because after_initialize is also called by each object returned by :find :
http://guides.rubyonrails.org/active_record_validations_callbacks.html#after_initialize-and-after_find
If the column happens to be a 'status' type column, and your model lends itself to the use of state machines, consider using the aasm gem, after which you can simply do
aasm column: "status" do
state :available, initial: true
state :used
# transitions
end
It still doesn't initialize the value for unsaved records, but it's a bit cleaner than rolling your own with init or whatever, and you reap the other benefits of aasm such as scopes for all your statuses.
https://github.com/keithrowell/rails_default_value
class Task < ActiveRecord::Base
default :status => 'active'
end
Here's a solution I've used that I was a little surprised hasn't been added yet.
There are two parts to it. First part is setting the default in the actual migration, and the second part is adding a validation in the model ensuring that the presence is true.
add_column :teams, :new_team_signature, :string, default: 'Welcome to the Team'
So you'll see here that the default is already set. Now in the validation you want to ensure that there is always a value for the string, so just do
validates :new_team_signature, presence: true
What this will do is set the default value for you. (for me I have "Welcome to the Team"), and then it will go one step further an ensure that there always is a value present for that object.
Hope that helps!
# db/schema.rb
create_table :store_listings, force: true do |t|
t.string :my_string, default: "original default"
end
StoreListing.new.my_string # => "original default"
# app/models/store_listing.rb
class StoreListing < ActiveRecord::Base
attribute :my_string, :string, default: "new default"
end
StoreListing.new.my_string # => "new default"
class Product < ActiveRecord::Base
attribute :my_default_proc, :datetime, default: -> { Time.now }
end
Product.new.my_default_proc # => 2015-05-30 11:04:48 -0600
sleep 1
Product.new.my_default_proc # => 2015-05-30 11:04:49 -0600
I had a similar challenge when working on a Rails 6 application.
Here's how I solved it:
I have a Users table and a Roles table. The Users table belongs to the Roles table. I also have an Admin and Student Models that inherit from the Users table.
It then required that I set a default value for the role whenever a user is created, say admin role that has an id = 1 or student role that has an id = 2.
class User::Admin < User
before_save :default_values
def default_values
# set role_id to '1' except if role_id is not empty
return self.role_id = '1' unless role_id.nil?
end
end
This means that before an admin user is created/saved in the database the role_id is set to a default of 1 if it is not empty.
return self.role_id = '1' unless role_id.nil?
is the same as:
return self.role_id = '1' unless self.role_id.nil?
and the same as:
self.role_id = '1' if role_id.nil?
but the first one is cleaner and more precise.
That's all.
I hope this helps
Been using this for a while.
# post.rb
class Post < ApplicationRecord
attribute :country, :string, default: 'ID'
end
use default_scope in rails 3
api doc
ActiveRecord obscures the difference between defaulting defined in the database (schema) and defaulting done in the application (model). During initialization, it parses the database schema and notes any default values specified there. Later, when creating objects, it assigns those schema-specified default values without touching the database.
discussion
From the api docs http://api.rubyonrails.org/classes/ActiveRecord/Callbacks.html
Use the before_validation method in your model, it gives you the options of creating specific initialisation for create and update calls
e.g. in this example (again code taken from the api docs example) the number field is initialised for a credit card. You can easily adapt this to set whatever values you want
class CreditCard < ActiveRecord::Base
# Strip everything but digits, so the user can specify "555 234 34" or
# "5552-3434" or both will mean "55523434"
before_validation(:on => :create) do
self.number = number.gsub(%r[^0-9]/, "") if attribute_present?("number")
end
end
class Subscription < ActiveRecord::Base
before_create :record_signup
private
def record_signup
self.signed_up_on = Date.today
end
end
class Firm < ActiveRecord::Base
# Destroys the associated clients and people when the firm is destroyed
before_destroy { |record| Person.destroy_all "firm_id = #{record.id}" }
before_destroy { |record| Client.destroy_all "client_of = #{record.id}" }
end
Surprised that his has not been suggested here