I'm relatively new to Haskell with main programming background coming from OO languages. I am trying to write an interpreter with a parser for a simple programming language. So far I have the interpreter at a state which I am reasonably happy with, but am struggling slightly with the parser.
Here is the piece of code which I am having problems with
data IntExp
= IVar Var
| ICon Int
| Add IntExp IntExp
deriving (Read, Show)
whitespace = many1 (char ' ')
parseICon :: Parser IntExp
parseICon =
do x <- many (digit)
return (ICon (read x :: Int))
parseIVar :: Parser IntExp
parseIVar =
do x <- many (letter)
prime <- string "'" <|> string ""
return (IVar (x ++ prime))
parseIntExp :: Parser IntExp
parseIntExp =
do x <- try(parseICon)<|>try(parseIVar)<|>parseAdd
return x
parseAdd :: Parser IntExp
parseAdd =
do x <- parseIntExp
whitespace
string "+"
whitespace
y <- parseIntExp
return (Add x y)
runP :: Show a => Parser a -> String -> IO ()
runP p input
= case parse p "" input of
Left err ->
do putStr "parse error at "
print err
Right x -> print x
The language is slightly more complex, but this is enough to show my problem.
So in the type IntExp ICon is a constant and IVar is a variable, but now onto the problem. This for example runs successfully
runP parseAdd "5 + 5"
which gives (Add (ICon 5) (ICon 5)), which is the expected result. The problem arises when using IVars rather than ICons eg
runP parseAdd "n + m"
This causes the program to error out saying there was an unexpected "n" where a digit was expected. This leads me to believe that parseIntExp isn't working as I intended. My intention was that it will try to parse an ICon, if that fails then try to parse an IVar and so on.
So I either think the problem exists in parseIntExp, or that I am missing something in parseIVar and parseICon.
I hope I've given enough info about my problem and I was clear enough.
Thanks for any help you can give me!
Your problem is actually in parseICon:
parseICon =
do x <- many (digit)
return (ICon (read x :: Int))
The many combinator matches zero or more occurrences, so it's succeeding on "m" by matching zero digits, then probably dying when read fails.
And while I'm at it, since you're new to Haskell, here's some unsolicited advice:
Don't use spurious parentheses. many (digit) should just be many digit. Parentheses here just group things, they're not necessary for function application.
You don't need to do ICon (read x :: Int). The data constructor ICon can only take an Int, so the compiler can figure out what you meant on its own.
You don't need try around the first two options in parseIntExp as it stands--there's no input that would result in either one consuming some input before failing. They'll either fail immediately (which doesn't need try) or they'll succeed after matching a single character.
It's usually a better idea to tokenize first before parsing. Dealing with whitespace at the same time as syntax is a headache.
It's common in Haskell to use the ($) operator to avoid parentheses. It's just function application, but with very low precedence, so that something like many1 (char ' ') can be written many1 $ char ' '.
Also, doing this sort of thing is redundant and unnecessary:
parseICon :: Parser IntExp
parseICon =
do x <- many digit
return (ICon (read x))
When all you're doing is applying a regular function to the result of a parser, you can just use fmap:
parseICon :: Parser IntExp
parseICon = fmap (ICon . read) (many digit)
They're the exact same thing. You can make things look even nicer if you import the Control.Applicative module, which gives you an operator version of fmap, called (<$>), as well as another operator (<*>) that lets you do the same thing with functions of multiple arguments. There's also operators (<*) and (*>) that discard the right or left values, respectively, which in this case lets you parse something while discarding the result, e.g., whitespace and such.
Here's a lightly modified version of your code with some of the above suggestions applied and some other minor stylistic tweaks:
whitespace = many1 $ char ' '
parseICon :: Parser IntExp
parseICon = ICon . read <$> many1 digit
parseIVar :: Parser IntExp
parseIVar = IVar <$> parseVarName
parseVarName :: Parser String
parseVarName = (++) <$> many1 letter <*> parsePrime
parsePrime :: Parser String
parsePrime = option "" $ string "'"
parseIntExp :: Parser IntExp
parseIntExp = parseICon <|> parseIVar <|> parseAdd
parsePlusWithSpaces :: Parser ()
parsePlusWithSpaces = whitespace *> string "+" *> whitespace *> pure ()
parseAdd :: Parser IntExp
parseAdd = Add <$> parseIntExp <* parsePlusWithSpaces <*> parseIntExp
I'm also new to Haskell, just wondering:
will parseIntExp ever make it to parseAdd?
It seems like ICon or IVar will always get parsed before reaching 'parseAdd'.
e.g. runP parseIntExp "3 + m"
would try parseICon, and succeed, giving
(ICon 3) instead of (Add (ICon 3) (IVar m))
Sorry if I'm being stupid here, I'm just unsure.
Related
I'm currently encountering a problem while translating a parser from a CFG-based tool (antlr) to Megaparsec.
The grammar contains lists of expressions (handled with makeExprParser) that are enclosed in brackets (<, >) and separated by ,.
Stuff like <>, <23>, <23,87> etc.
The problem now is that the expressions may themselves contain the > operator (meaning "greater than"), which causes my parser to fail.
<1223>234> should, for example, be parsed into [BinaryExpression ">" (IntExpr 1223) (IntExpr 234)].
I presume that I have to strategically place try somewhere, but the places I tried (to the first argument of sepBy and the first argument of makeExprParser) did unfortunately not work.
Can I use makeExprParser in such a situation or do I have to manually write the expression parser?:
This is the relevant part of my parser:
-- uses megaparsec, text, and parser-combinators
{-# LANGUAGE OverloadedStrings #-}
module Main where
import Control.Monad.Combinators.Expr
import Data.Text
import Data.Void
import System.Environment
import Text.Megaparsec
import Text.Megaparsec.Char
import qualified Text.Megaparsec.Char.Lexer as L
type BinaryOperator = Text
type Name = Text
data Expr
= IntExpr Integer
| BinaryExpression BinaryOperator Expr Expr
deriving (Eq, Show)
type Parser = Parsec Void Text
lexeme :: Parser a -> Parser a
lexeme = L.lexeme sc
symbol :: Text -> Parser Text
symbol = L.symbol sc
sc :: Parser ()
sc = L.space space1 (L.skipLineComment "//") (L.skipBlockCommentNested "/*" "*/")
parseInteger :: Parser Expr
parseInteger = do
number <- some digitChar
_ <- sc
return $ IntExpr $ read number
parseExpr :: Parser Expr
parseExpr = makeExprParser parseInteger [[InfixL (BinaryExpression ">" <$ symbol ">")]]
parseBracketList :: Parser [Expr]
parseBracketList = do
_ <- symbol "<"
exprs <- sepBy parseExpr (symbol ",")
_ <- symbol ">"
return exprs
main :: IO ()
main = do
text : _ <- getArgs
let res = runParser parseBracketList "stdin" (pack text)
case res of
(Right suc) -> do
print suc
(Left err) ->
putStrLn $ errorBundlePretty err
You've (probably) misdiagnosed the problem. Your parser fails on <1233>234> because it's trying to parse > as a left associative operator, like +. In other words, the same way:
1+2+
would fail, because the second + has no right-hand operand, your parser is failing because:
1233>234>
has no digit following the second >. Assuming you don't want your > operator to chain (i.e., 1>2>3 is not a valid Expr), you should first replace InfixL with InfixN (non-associative) in your makeExprParser table. Then, it will parse this example fine.
Unfortunately, with or without this change your parser will still fail on the simpler test case:
<1233>
because the > is interpreted as an operator within a continuing expression.
In other words, the problem isn't that your parser can't handle expressions with > characters, it's that it's overly aggressive in treating > characters as part of an expression, preventing them from being recognized as the closing angle bracket.
To fix this, you need to figure out exactly what you're parsing. Specifically, you need to resolve the ambiguity in your parser by precisely characterizing the situations where > can be part of a continuing expression and where it can't.
One rule that will probably work is to only consider a > as an operator if it is followed by a valid "term" (i.e., a parseInteger). You can do this with lookAhead. The parser:
symbol ">" <* lookAhead term
will parse a > operator only if it is followed by a valid term. If it fails to find a term, it will consume some input (at least the > symbol itself), so you must surround it with a try:
try (symbol ">" <* lookAhead term)
With the above two fixes applied to parseExpr:
parseExpr :: Parser Expr
parseExpr = makeExprParser term
[[InfixN (BinaryExpression ">" <$ try (symbol ">" <* lookAhead term))]]
where term = parseInteger
you'll get the following parses:
λ> parseTest parseBracketList "<23>"
[IntExpr 23]
λ> parseTest parseBracketList "<23,87>"
[IntExpr 23,IntExpr 87]
λ> parseTest parseBracketList "<23,87>18>"
[IntExpr 23,BinaryExpression ">" (IntExpr 87) (IntExpr 18)]
However, the following will fail:
λ> parseTest parseBracketList "<23,87>18"
1:10:
|
1 | <23,87>18
| ^
unexpected end of input
expecting ',', '>', or digit
λ>
because the fact that the > is followed by 18 means that it is a valid operator, and it is parse failure that the valid expression 87>18 is followed by neither a comma nor a closing > angle bracket.
If you need to parse something like <23,87>18, you have bigger problems. Consider the following two test cases:
<1,2>3,4,5,6,7,...,100000000000,100000000001>
<1,2>3,4,5,6,7,...,100000000000,100000000001
It's a challenge to write an efficient parser that will parse the first one as a list of 10000000000 expressions but the second one as a list of two expression:
[IntExpr 1, IntExpr 2]
followed by some "extra" text. Hopefully, the underlying "language" you're trying to parse isn't so hopelessly broken that this will be an issue.
I am trying to wrap my head around writing parser using parsec in Haskell, in particular how backtracking works.
Take the following simple parser:
import Text.Parsec
type Parser = Parsec String () String
parseConst :: Parser
parseConst = do {
x <- many digit;
return $ read x
}
parseAdd :: Parser
parseAdd = do {
l <- parseExp;
char '+';
r <- parseExp;
return $ l <> "+" <> r
}
parseExp :: Parser
parseExp = try parseConst <|> parseAdd
pp :: Parser
pp = parseExp <* eof
test = parse pp "" "1+1"
test has value
Left (line 1, column 2):
unexpected '+'
expecting digit or end of input
In my mind this should succeed since I used the try combinator on parseConst in the definition of parseExp.
What am I missing? I am also interrested in pointers for how to debug this in my own, I tried using parserTraced which just allowed me to conclude that it indeed wasn't backtracking.
PS.
I know this is an awful way to write an expression parser, but I'd like to understand why it doesn't work.
There are a lot of problems here.
First, parseConst can never work right. The type says it must produce a String, so read :: String -> String. That particular Read instance requires the input be a quoted string, so being passed 0 or more digit characters to read is always going to result in a call to error if you try to evaluate the value it produces.
Second, parseConst can succeed on matching zero characters. I think you probably wanted some instead of many. That will make it actually fail if it encounters input that doesn't start with a digit.
Third, (<|>) doesn't do what you think. You might think that (a <* c) <|> (b <* c) is interchangeable with (a <|> b) <* c, but it isn't. There is no way to throw try in and make it the same, either. The problem is that (<|>) commits to whichever branch succeed, if one does. In (a <|> b) <* c, if a matches, there's no way later to backtrack and try b there. Doesn't matter how you lob try around, it can't undo the fact that (<|>) committed to a. In contrast, (a <* c) <|> (b <* c) doesn't commit until both a and c or b and c match the input.
This is the situation you're encountering. You have (try parseConst <|> parseAdd) <* eof, after a bit of inlining. Since parseConst will always succeed (see the second issue), parseAdd will never get tried, even if the eof fails. So after parseConst consumes zero or more leading digits, the parse will fail unless that's the end of the input. Working around this essentially requires carefully planning your grammar such that any use of (<|>) is safe to commit locally. That is, the contents of each branch must not overlap in a way that is disambiguated only by later portions of the grammar.
Note that this unpleasant behavior with (<|>) is how the parsec family of libraries work, but not how all parser libraries in Haskell work. Other libraries work without the left bias or commit behavior the parsec family have chosen.
I am trying to write a parser for a small language with the following piece of code
import Text.ParserCombinators.Parsec
import Text.Parsec.Token
data Exp = Atom String | Op String Exp
instance Show Exp where
show (Atom x) = x
show (Op f x) = f ++ "(" ++ (show x) ++ ")"
parse_exp :: Parser Exp
parse_exp = (try parse_atom) <|> parse_op
parse_atom :: Parser Exp
parse_atom = do
x <- many1 letter
return (Atom x)
parse_op :: Parser Exp
parse_op = do
x <- many1 letter
char '('
y <- parse_exp
char ')'
return (Op x y)
But when I type in ghci
>>> parse (parse_exp <* eof) "<error>" "s(t)"
I get the output
Left "<error>" (line 1, column 2):
unexpected '('
expecting letter or end of input
If I redefine parse_exp as
parse_exp = (try parse_op) <|> parse_atom
then with I get correct result
>>> parse (parse_exp <* eof) "<error>" "s(t)"
Right s(t)
But I am confused why the first one does not work. Is there a general fix to these kinds of problems in parsing?
When a Parsec parser, like parse_atom, is run on a particular string, there are four possible results:
It succeeds, consuming some input.
It fails, consuming some input.
It succeeds, consuming no input.
It fails, consuming no input.
In the Parsec source code, these are referred to as "consumed ok", "consumed err", "empty ok" and "empty err" (sometimes abbreviated cok, cerr, eok, eerr).
When two Parsec parsers are used in an alternative, like p <|> q, here's how it's parsed. First, Parsec tries to parse with p. Then:
If this results in "consumed ok" or "empty ok", the parse succeeds and this becomes the result of the entire parser p <|> q.
If this results in "empty err", Parsec tries the alternative q, and this becomes the result of the entire p <|> q parser.
If this results in "consumed err", the entire parser p <|> q fails with "consumed err" (cerr).
Note the critical difference between p returning cerr (which causes the whole parser to fail) versus returning eerr (which causes the alternative parser q to be tried).
The try function changes the behavior of a parser by converting a "cerr" result to an "eerr" result.
This means that if you are trying to parse the text "s(t)" with different parsers:
with the parser parse_atom <|> parse_op, the parser parse_atom returns "cok" consuming "s" and leaving unparseable text "(t)" which causes an error
with the parser try parse_atom <|> parse_op, the parser parse_atom still returns "cok" consuming "s", so the try (which only changes cerr to eerr) has no effect, and the unparseable text "(t)" causes the same error
with the parser parse_op <|> parse_atom, the parser parse_op successfully parses the string (actually, it doesn't because the recursive call to parse_exp can't parse "t", but let's ignore that); however, if the same parser was used on the text "s", then parse_op would consume the "s" before failing (i.e., cerr), causing the entire parse to fail instead of trying the alternative parse_atom
with the parser try parse_op <|> parse_atom, this would parse "s(t)", exactly as the previous example, and the try would have no effect; however, it would also work on the text "s", because parse_op would consume the "s" before failing with cerr, then try would "rescue" the parse by turning the cerr into an eerr, and the alternative parse_atom would be checked, successfully parsing (cok) the atom "s".
That's why the "correct" parser for your problem is try parse_op <|> parse_atom.
Be warned that this behavior isn't a fundamental aspect of monadic parsers. It's a design choice made by Parsec (and compatible parsers like Megaparsec). Other monadic parsers can have different rules for how alternatives with <|> work.
The "general fix" for these kind of Parsec parsing problems is to be aware of the facts that in the expression p <|> q:
p is tried first, and if it succeeds, q will be ignored, even if q would provide a "longer" or "better" or "more sensible" parse or avoid additional parsing errors further down the road. In parse_atom <|> parse_op, because parse_atom can succeed on strings meant for parse_op, this order won't work correctly.
q is only tried if p fails without consuming input. You must arrange for p to not consume anything on failure, possibly by using try, if you expect the alternative q to be checked. So, parse_op <|> parse_atom isn't going to work if parse_op starts to consume something (like an identifier) before realizing it can't continue and returning cerr.
As an alternative to using try, you can also think more carefully about the structure of your parser. An alternative way of writing parse_exp, for example, would be:
parse_exp :: Parser Exp
parse_exp = do
-- there's always an identifier
x <- many1 letter
-- there *might* be an expression in parentheses
y <- optionMaybe (parens parse_exp)
case y of
Nothing -> return (Atom x)
Just y' -> return (Op x y')
where parens = between (char '(') (char ')')
This can be written a little more concisely, but even then it's not as "elegant" as something like try parse_op <|> parse_atom. (It performs better, though, so that might be a consideration in some applications.)
The problem is that the string "s" counts as an atom according to your definitions. Try this:
parse parse_atom "" "s(t)"
> Atom "s"
So your parser parse_exp actually succeeds, returning Atom "s", but then you also expect an EOF right after it, and that's where it fails, encountering an open paren instead of an EOF (just like the error message says!)
When you swap the alternative around, it would first attempt parse_op, which would succeed, returning Op "s" "t", and then encounter EOF, just as expected.
Let's say the input looks something like foo#1 bar baz-3.qux [...]. I want to write a parser that only consumes the input up until the first space before the [, which means foo#1 bar baz-3.qux (without the trailing space).
How should I approach this using parsec?
I can imagine something like
foo = many1 $ letter <|> digit <|> oneOf " #-."
but this consumes even the space at the end, which I'd like to avoid. What is a general approach to parsing a list of things interspersed with another thing? (Imagine it's not just a space, but something that would also need to be parsed).
P.S: I'm looking for the most general solution possible, not a clever hack that solves this particular example.
I think what you're looking for is exactly notFollowedBy. Something like
foo = many1 $ letter
<|> digit
<|> oneOf "#-."
<|> (try $ char ' ' >> notFollowedBy (char '[') >> return ' ')
You can abstract out the pattern to get the general function of course:
endedBy :: (Show y) => Parser x -> Parser x -> Parser y -> Parser [x]
endedBy p final terminal = many1 $ p <|> t where
t = try $ do
x <- final
notFollowedBy terminal
return x
foo' = endedBy (letter <|> digit <|> oneOf "#-.") (char ' ') (char '[')
I'm attempting to write a parser in Haskell using Parsec. Currently I have a program that can parse
test x [1,2,3] end
The code that does this is given as follows
testParser = do {
reserved "test";
v <- identifier;
symbol "[";
l <- sepBy natural commaSep;
symbol "]";
p <- pParser;
return $ Test v (List l) p
} <?> "end"
where commaSep is defined as
commaSep = skipMany1 (space <|> char ',')
Now is there some way for me to parse a similar statement, specifically:
test x [1...3] end
Being new to Haskell, and Parsec for that matter, I'm sure there's some nice concise way of doing this that I'm just not aware of. Any help would be appreciated.
Thanks again.
I'll be using some functions from Control.Applicative like (*>). These functions are useful if you want to avoid the monadic interface of Parsec and prefer the applicative interface, because the parsers become easier to read that way in my opinion.
If you aren't familiar with the basic applicative functions, leave a comment and I'll explain them. You can look them up on Hoogle if you are unsure.
As I've understood your problem, you want a parser for some data structure like this:
data Test = Test String Numbers
data Numbers = List [Int] | Range Int Int
A parser that can parse such a data structure would look like this (I've not compiled the code, but it should work):
-- parses "test <identifier> [<numbers>] end"
testParser :: Parser Test
testParser =
Test <$> reserved "test" *> identifier
<*> symbol "[" *> numbersParser <* symbol "]"
<* reserved "end"
<?> "test"
numbersParser :: Parser Numbers
numbersParser = try listParser <|> rangeParser
-- parses "<natural>, <natural>, <natural>" etc
listParser :: Parser Numbers
listParser =
List <$> sepBy natural (symbol ",")
<?> "list"
-- parses "<natural> ... <natural>"
rangeParser :: Parser Numbers
rangeParser =
Range <$> natural <* symbol "..."
<*> natural
<?> "range"