hey, I am a newbie in symfony.
I am following this joobet tutorial on symfony-project.com, I am on there day 3 http://www.symfony-project.org/jobeet/1_4/Doctrine/en/03
Whenever I type php symfony doctrine:insert-sql, I get the
following error:
doctrine creating tables
Couldn't locate driver named mysql
I am using it on WAMP. I have symfony present at C:\wamp\bin\php\php5.3.0\PEAR\symfony
and my project is present in C:\wamp\www\jobeet
Kindly help me resolve this, as I am stuck here, and cant move further.
You need to enable the mysql driver of PDO. You will need to edit 1 or 2 php.ini files, depending on your system.
First you need to edit the php.ini apache uses, you can find it by creating a new file that does a phpinfo(), checking it via a browser and searching for "php.ini".
The second one is the one the command line uses, open a terminal (start - run - cmd.exe), and run php -i > phpinfo.txt, then open the text file and search for "php.ini".
You are looking for the extensions part of it, uncomment the line with pdo_mysql (remove the ; at the beginning). After all these, restart apache and you're good to go.
Related
I know this has been asked many times before. But I am getting a:
The mbstring extension is missing. Please check your PHP configuration.
First off I am using WanmpServer3.0.0 64 on a Win7 64 VM.
-I tried editing the php.ini file to give an absolute path to no avail
-made sure that the extension=phpmbstring.dll is uncommented
Another problem is that i noticed that whenever i load a php page it has fatal errors for my mysql commands.
When I use the wampmanager from the tray to open the php.ini file instead of through windows explorer I get:
Cannot find the C:\wamp64\bin\apache\apache2.4.17\bin\php.ini file. Do you want to create a new file?
So now I'm thinking something has gone drastically wrong and would like to uninstall/reinstall Wamp. I attempt to use the mysql console to save my databases before deleting the wamp directory. However when I run a mysqldump -all-databases > all_database.sql it just drops down to an empty line and nothing happens.
mysql console screenshot
If I browse around in the C:\wamp64 directory i find the "data" directory within \bin\mysql where it seems all of my databases reside but not in readable form.
Is there anyway to save my databases??
BTW: This whole setup was working fine previously, so I'm not sure what caused the crash and burn.
Was able to figure it out.
I opened the php.ini file from the PHP bin folder and copied all of the contents into a new php.ini file to reside in the apache bin file.
Now everything works again.
I'm not sure this is how wampserver is supposed to work or what changed to start the problem but it's pseudo-resolved now.
I am using laravel 5.1 and I am following a tutorial that I've followed before without any issues. But today when I ran
php artisan tinker
I got the following error
PsySH history file found at '/home/vagrant/.config/psysh_history'. Please delete it or move it to '/home/vagrant/.config/psysh/psysh_history'.
I have never seen this before and I have been looking for it but dont know where to locate it so can either delete it or remove it. Also another question I have is should I delete it or move it? I don't want to do something that inadvertantly crashes my app. Thanks in advance
So you don't have to answer and accept your own question:
It looks like pshsy_history is a history file for the php debugger psysh, and your php command wants it in a different location from where it is. I'm guessing it was created the first time you followed the tutorial.
I'm thinking it's safe to delete with rm /home/vagrant/.config/psysh_history since your php command seems like it's going to create a new one.
If you want to be on the safe side then to move it like the error message says with mv /home/vagrant/.config/psysh_history /home/vagrant/.config/psysh/psysh_history
If you want to double check the contents of the file before doing either, try head /home/vagrant/.config/psysh_history.
find "psysh_history" manually in "home" folder and than move or remove file
Note: Its a hidden file
For future viewers:
I had a similar issue today. The only difference was I was not running my project on vagrant instead of MAMP.
Few different things I had to do besides what are mentioned above were :
Moved the folder ../.config/psysh/psysh_history and did following :
1) I had to shut down the MAMP
2) Restart terminal
3) php artisan tinker
Note: I was not able to run tinker until I restarted MAMP and terminal.
Faced the same issue but
I didn't find psysh_history file in .config folder.
But because it was asking to move the psysh_history file to .config/psysh, so I just created a folder psysh inside .config folder and it works.
I have enabled the mbstring extension by removing the ';':
extension=php_mbstring.dll
I am using the correct php.ini file, checked by using phpinfo().
Extension dir specified in php.ini: extension_dir = "c:/wamp/bin/php/php5.5.12/ext/"
Indeed, when I go there, I find 'php_mbstring.dll'
I've restarted wamp multiple times.
What else can be wrong here?
UPDATE:
seems, my whole wamp installation is fd up with respect to mysql:
Your PHP installation appears to be missing the MySQL extension which is required by WordPress.
I do have mysql installed and everything though...module is also enabled etc.
This sounds like you have a rouge php.ini file somewhere and it is loading the wrong one.
There are actually 2 php.ini files in WAMPServer as in most PHP/Apache installations.
One is called \wamp\bin\php\{phpversion}\php.ini and this is only used by the PHP CLI
The other is called \wamp\bin\php\{phpversion}\phpForApache.ini and is used when you are running PHP through Apache.
If you use the wampmanager menus you will edit the one used by Apache/PHP i.e.
wampmanager => PHP -> php.ini
However if you have actually edited the correct php.ini then it is likely you have a rouge version of php.ini somewhere on your system.
Run the phpinfo() link again from the wampmanager homepage and check this parameter which is shown on the first section of the output.
Loaded Configuration File
It should be pointing to \wamp\bin\php\php5.5.12\phpForApache.ini in your case.
If its pointing somewhere else then you probably tried to install PHP and Apache manually before finding WAMPServer and that has left a php.ini file somewhere where Apache is finding it.
Here is the PHP Manual page that defines the search path order used by Apache when looking for a php.ini file. This may help you find and remove any rouge versions of php.ini
Install the gd library also.
check this link http://www.php.net/manual/en/mbstring.installation.php
or
There's a much easier way than recompiling PHP. Just yum install the required mbstring library:
Example: How to install PHP mbstring on CentOS 6.2
yum --enablerepo=remi install php-mbstring
Oh, and don't forget to restart apache afterward.
Hopefully, despite similar question titles, this isn't a duplicate issue.
I've installed ImageMagick-6.7.5-6-Q16-windows-dll.exe.
I have php_imagick_dyn-Q16.dll renamed to php_imagick.dll in PHP's ext directory.
I have extension=php_imagick.dll in my php.ini.
I try to run a basic test: php -r "var_dump(class_exists('Imagick'));".
I get this error:
PHP Startup: imagick: Unable to initialise module
Module compiled with module API=20060613
PHP compiled with module API=20090626
These options must match.
CLI has stopped working.
Windows can check online for a solution to the problem.
> Check online for a solution and close the program
> Close the program
What have I done wrong?
First install :
Link
Download :
http://www.sk89q.com/2010/03/vc6-windows-binaries-for-imagick-2-3-0/
Choose the TS one
Open your php.ini file
Add this line :
extension=php_imagick.dll
Restart your apache server
open php_info()
Now your imagick lib is ready to use.
This works for me.
I'm working on a symfony project and I need a user access conected to an LDAP server. So I searched for something already done to add to my app and found this plugin that has all I wanted.
So I tried to install with the command $ php symfony plugin:install bhLDAPAuthPlugin
for some reason it throws me this error:
No release avaiable for plugin "bhLDAPAuthPlugin"
I don't really understand what that message means. I've checked the spell of the command (also copied the command given in the page of the plugin) and same error appears. If I had no all requeriments for instalation, other errors would be thrown, right?
PS: If you know some easy way to implement by myself the comunication with LDAP (Microsoft Active Directory) will also be appreciated.
No exactly sure how to solve the error message, perhaps it helps is specifically specify which version you wish to install.
Otherwise there's an easy workaround:
Just download the tgz file from here:
http://www.symfony-project.org/plugins/bhLDAPAuthPlugin/6_0_0
and do
php symfony plugin:install bhLDAPAuthPlugin-etc-etc.tgz