I have a pager on a table using ajax and I would like each such request also to change the browser's url, so when I hit refresh button I won't skip back to first page. I was fighting the Url parameter of AjaxOptions, but it keeps winning over me. Please help.
Trim
You can safely change the URL past the hash mark without redirecting the page. However, the user can (in most browsers) navigate through these changes with the Back and Forwards buttons. This technique is usually called "history."
Because the technique is difficult to get working in all browsers, you'll want to use a framework. Take a look at http://www.mikage.to/jquery/jquery_history.html.
I can also recommend ExtJS's history stuff too. Take a look at this example:
http://www.extjs.com/deploy/dev/examples/history/history.html#main-tabs:tab2
Again, notice that not only does the URL change when the user does stuff, but changing the URL (via Back and Forward) also affects the page. This is good, awesome even, but means it must be done very carefully.
There is not really a quick and easy way to do this, here is an article on the topic. The problem is that not only does the Ajax have to generate the URLs, it also has to take those URLs into account when loading the page to get the appropriate content.
Related
I am looking for a way to simply disable AJAX on ONLY the home page in my project. I am using MVC so there are links to the home page in many areas. I want AJAX for the entire site however not when loading the home page. The reason is because I am using a script to setup the UI dynamically, it contains objects and those objects load when the page loads as a hard refresh but no when jQuery Mobile transitions to the page. I am looking for a solution where I can add a Script to just the home page to disable AJAX whenever it is referenced. But still have AJAX for the rest of the solution. Its a very unique situation but I haven't found anything that could prevent ONE page from being loaded through AJAX. Does anyone know?
if I could I would like to do something like this only on the home page
<script>
$(document).bind(function(){
[some call to disable this page from being loaded with AJAX]
});
</script>
Thanks in advance.
No such thing exists. Think of AJAX like a little mini-browser: if the URL returns a response, it can access it. However, it might be possible to branch on the existence of a request header in your Home action and return something like a 403 Forbidden if an "AJAXy" request header is detected.
jQuery, for example, sends an X-Requested-With: XMLHttpRequest header along with its request. If this header is present, the request most likely came from an AJAX method in jQuery (or other libraries that potentially use the same methodology). You can also pass your own custom headers with the AJAX request, if you want. However, all of this is implementation-specific, so it pretty much depends on all developers on your team doing things a certain way. For example, if someone used a standard JavaScript XHR object to make the request, then the X-Requested-With header would be absent. Or, if you used a custom header, every developer would need to pass that header every time, or again, the logic would break down.
If your business rules say that the home page shouldn't be requested via AJAX, the best way to handle that is at a business level, i.e. policy. Anything you try to in the actual code could easily be worked around.
Could anyone please tell how the site http://www.outsharked.com/imagemapster/default.aspx?what.html is working in such way? Modifying the url without loading/reloading the page. I think this is not done by html5. Because it works in IE6 which doesn't support html5.
I created that site. The commenter is correct, it uses Javascript to change the URL. There's nothing about how that navigation works that is different for IE6 - that browser supports the necessary client-side functionality to do this kind of thing. The basic functionality involves:
capturing click events on the nav, and loading the inner content via AJAX
update the URL to reflect a working direct URL to target.
The links also are valid anchor links that, in the absence of Javascript, would go to the same page (but load the whole thing). This is your basic AJAX web site setup with one minor difference. It's common practice to use a URLs like this in AJAX/single page web sites:
http://mysite.com/home#somepage
or even just
http://mysite.com/#somepage
Where the hashtag part represents the actual page a user has navigated to. If someone accessed that url directly, e.g. from outside the site, the site would use Javascript to load the correct content based on the hashtag, after the page had loaded. This means that there might be a little delay for the inner content to reflect the correct page, since it has to run another request after the initial page has loaded from the browser to get the inner content via AJAX.
I was trying to avoid that by creating a setup that worked completely with and without Javascript. If you go directly to a URL within the site such as http://www.outsharked.com/imagemapster/default.aspx?faq.html you will notice it loads the content directly. This URL will work even if Javascript is disabled. You can't actually do this using hashtags, since hashtag content is not sent to the server. Only the client knows what's after the hashtag in a URL. That's why I was using query strings to represent inner pages.
This site architecture was sort of an experiment at the time. It works pretty well but the code isn't fantastic, I didn't really do anything else with it, and I'm sure there are other better-fleshed-out/tested/full-featured frameworks out there to do much the same thing.
But it might not be a bad example of the nuts and bolts of creating a basic AJAX navigation setup, as a learning tool, since it's pretty concise, and also does HTML5 history navigation (e.g. so the back button works on modern browsers).
I've just noticed that the long, convoluted Facebook URLs that we're used to now look like this:
http://www.facebook.com/example.profile#!/pages/Another-Page/123456789012345
As far as I can recall, earlier this year it was just a normal URL-fragment-like string (starting with #), without the exclamation mark. But now it's a shebang or hashbang (#!), which I've previously only seen in shell scripts and Perl scripts.
The new Twitter URLs now also feature the #! symbols. A Twitter profile URL, for example, now looks like this:
http://twitter.com/#!/BoltClock
Does #! now play some special role in URLs, like for a certain Ajax framework or something since the new Facebook and Twitter interfaces are now largely Ajaxified?
Would using this in my URLs benefit my Web application in any way?
This technique is now deprecated.
This used to tell Google how to index the page.
https://developers.google.com/webmasters/ajax-crawling/
This technique has mostly been supplanted by the ability to use the JavaScript History API that was introduced alongside HTML5. For a URL like www.example.com/ajax.html#!key=value, Google will check the URL www.example.com/ajax.html?_escaped_fragment_=key=value to fetch a non-AJAX version of the contents.
The octothorpe/number-sign/hashmark has a special significance in an URL, it normally identifies the name of a section of a document. The precise term is that the text following the hash is the anchor portion of an URL. If you use Wikipedia, you will see that most pages have a table of contents and you can jump to sections within the document with an anchor, such as:
https://en.wikipedia.org/wiki/Alan_Turing#Early_computers_and_the_Turing_test
https://en.wikipedia.org/wiki/Alan_Turing identifies the page and Early_computers_and_the_Turing_test is the anchor. The reason that Facebook and other Javascript-driven applications (like my own Wood & Stones) use anchors is that they want to make pages bookmarkable (as suggested by a comment on that answer) or support the back button without reloading the entire page from the server.
In order to support bookmarking and the back button, you need to change the URL. However, if you change the page portion (with something like window.location = 'http://raganwald.com';) to a different URL or without specifying an anchor, the browser will load the entire page from the URL. Try this in Firebug or Safari's Javascript console. Load http://minimal-github.gilesb.com/raganwald. Now in the Javascript console, type:
window.location = 'http://minimal-github.gilesb.com/raganwald';
You will see the page refresh from the server. Now type:
window.location = 'http://minimal-github.gilesb.com/raganwald#try_this';
Aha! No page refresh! Type:
window.location = 'http://minimal-github.gilesb.com/raganwald#and_this';
Still no refresh. Use the back button to see that these URLs are in the browser history. The browser notices that we are on the same page but just changing the anchor, so it doesn't reload. Thanks to this behaviour, we can have a single Javascript application that appears to the browser to be on one 'page' but to have many bookmarkable sections that respect the back button. The application must change the anchor when a user enters different 'states', and likewise if a user uses the back button or a bookmark or a link to load the application with an anchor included, the application must restore the appropriate state.
So there you have it: Anchors provide Javascript programmers with a mechanism for making bookmarkable, indexable, and back-button-friendly applications. This technique has a name: It is a Single Page Interface.
p.s. There is a fourth benefit to this technique: Loading page content through AJAX and then injecting it into the current DOM can be much faster than loading a new page. In addition to the speed increase, further tricks like loading certain portions in the background can be performed under the programmer's control.
p.p.s. Given all of that, the 'bang' or exclamation mark is a further hint to Google's web crawler that the exact same page can be loaded from the server at a slightly different URL. See Ajax Crawling. Another technique is to make each link point to a server-accessible URL and then use unobtrusive Javascript to change it into an SPI with an anchor.
Here's the key link again: The Single Page Interface Manifesto
First of all: I'm the author of the The Single Page Interface Manifesto cited by raganwald
As raganwald has explained very well, the most important aspect of the Single Page Interface (SPI) approach used in FaceBook and Twitter is the use of hash # in URLs
The character ! is added only for Google purposes, this notation is a Google "standard" for crawling web sites intensive on AJAX (in the extreme Single Page Interface web sites). When Google's crawler finds an URL with #! it knows that an alternative conventional URL exists providing the same page "state" but in this case on load time.
In spite of #! combination is very interesting for SEO, is only supported by Google (as far I know), with some JavaScript tricks you can build SPI web sites SEO compatible for any web crawler (Yahoo, Bing...).
The SPI Manifesto and demos do not use Google's format of ! in hashes, this notation could be easily added and SPI crawling could be even easier (UPDATE: now ! notation is used and remains compatible with other search engines).
Take a look to this tutorial, is an example of a simple ItsNat SPI site but you can pick some ideas for other frameworks, this example is SEO compatible for any web crawler.
The hard problem is to generate any (or selected) "AJAX page state" as plain HTML for SEO, in ItsNat is very easy and automatic, the same site is in the same time SPI or page based for SEO (or when JavaScript is disabled for accessibility). With other web frameworks you can ever follow the double site approach, one site is SPI based and another page based for SEO, for instance Twitter uses this "double site" technique.
I would be very careful if you are considering adopting this hashbang convention.
Once you hashbang, you can’t go back. This is probably the stickiest issue. Ben’s post put forward the point that when pushState is more widely adopted then we can leave hashbangs behind and return to traditional URLs. Well, fact is, you can’t. Earlier I stated that URLs are forever, they get indexed and archived and generally kept around. To add to that, cool URLs don’t change. We don’t want to disconnect ourselves from all the valuable links to our content. If you’ve implemented hashbang URLs at any point then want to change them without breaking links the only way you can do it is by running some JavaScript on the root document of your domain. Forever. It’s in no way temporary, you are stuck with it.
You really want to use pushState instead of hashbangs, because making your URLs ugly and possibly broken -- forever -- is a colossal and permanent downside to hashbangs.
To have a good follow-up about all this, Twitter - one of the pioneers of hashbang URL's and single-page-interface - admitted that the hashbang system was slow in the long run and that they have actually started reversing the decision and returning to old-school links.
Article about this is here.
I always assumed the ! just indicated that the hash fragment that followed corresponded to a URL, with ! taking the place of the site root or domain. It could be anything, in theory, but it seems the Google AJAX Crawling API likes it this way.
The hash, of course, just indicates that no real page reload is occurring, so yes, it’s for AJAX purposes. Edit: Raganwald does a lovely job explaining this in more detail.
I've just noticed that the long, convoluted Facebook URLs that we're used to now look like this:
http://www.facebook.com/example.profile#!/pages/Another-Page/123456789012345
As far as I can recall, earlier this year it was just a normal URL-fragment-like string (starting with #), without the exclamation mark. But now it's a shebang or hashbang (#!), which I've previously only seen in shell scripts and Perl scripts.
The new Twitter URLs now also feature the #! symbols. A Twitter profile URL, for example, now looks like this:
http://twitter.com/#!/BoltClock
Does #! now play some special role in URLs, like for a certain Ajax framework or something since the new Facebook and Twitter interfaces are now largely Ajaxified?
Would using this in my URLs benefit my Web application in any way?
This technique is now deprecated.
This used to tell Google how to index the page.
https://developers.google.com/webmasters/ajax-crawling/
This technique has mostly been supplanted by the ability to use the JavaScript History API that was introduced alongside HTML5. For a URL like www.example.com/ajax.html#!key=value, Google will check the URL www.example.com/ajax.html?_escaped_fragment_=key=value to fetch a non-AJAX version of the contents.
The octothorpe/number-sign/hashmark has a special significance in an URL, it normally identifies the name of a section of a document. The precise term is that the text following the hash is the anchor portion of an URL. If you use Wikipedia, you will see that most pages have a table of contents and you can jump to sections within the document with an anchor, such as:
https://en.wikipedia.org/wiki/Alan_Turing#Early_computers_and_the_Turing_test
https://en.wikipedia.org/wiki/Alan_Turing identifies the page and Early_computers_and_the_Turing_test is the anchor. The reason that Facebook and other Javascript-driven applications (like my own Wood & Stones) use anchors is that they want to make pages bookmarkable (as suggested by a comment on that answer) or support the back button without reloading the entire page from the server.
In order to support bookmarking and the back button, you need to change the URL. However, if you change the page portion (with something like window.location = 'http://raganwald.com';) to a different URL or without specifying an anchor, the browser will load the entire page from the URL. Try this in Firebug or Safari's Javascript console. Load http://minimal-github.gilesb.com/raganwald. Now in the Javascript console, type:
window.location = 'http://minimal-github.gilesb.com/raganwald';
You will see the page refresh from the server. Now type:
window.location = 'http://minimal-github.gilesb.com/raganwald#try_this';
Aha! No page refresh! Type:
window.location = 'http://minimal-github.gilesb.com/raganwald#and_this';
Still no refresh. Use the back button to see that these URLs are in the browser history. The browser notices that we are on the same page but just changing the anchor, so it doesn't reload. Thanks to this behaviour, we can have a single Javascript application that appears to the browser to be on one 'page' but to have many bookmarkable sections that respect the back button. The application must change the anchor when a user enters different 'states', and likewise if a user uses the back button or a bookmark or a link to load the application with an anchor included, the application must restore the appropriate state.
So there you have it: Anchors provide Javascript programmers with a mechanism for making bookmarkable, indexable, and back-button-friendly applications. This technique has a name: It is a Single Page Interface.
p.s. There is a fourth benefit to this technique: Loading page content through AJAX and then injecting it into the current DOM can be much faster than loading a new page. In addition to the speed increase, further tricks like loading certain portions in the background can be performed under the programmer's control.
p.p.s. Given all of that, the 'bang' or exclamation mark is a further hint to Google's web crawler that the exact same page can be loaded from the server at a slightly different URL. See Ajax Crawling. Another technique is to make each link point to a server-accessible URL and then use unobtrusive Javascript to change it into an SPI with an anchor.
Here's the key link again: The Single Page Interface Manifesto
First of all: I'm the author of the The Single Page Interface Manifesto cited by raganwald
As raganwald has explained very well, the most important aspect of the Single Page Interface (SPI) approach used in FaceBook and Twitter is the use of hash # in URLs
The character ! is added only for Google purposes, this notation is a Google "standard" for crawling web sites intensive on AJAX (in the extreme Single Page Interface web sites). When Google's crawler finds an URL with #! it knows that an alternative conventional URL exists providing the same page "state" but in this case on load time.
In spite of #! combination is very interesting for SEO, is only supported by Google (as far I know), with some JavaScript tricks you can build SPI web sites SEO compatible for any web crawler (Yahoo, Bing...).
The SPI Manifesto and demos do not use Google's format of ! in hashes, this notation could be easily added and SPI crawling could be even easier (UPDATE: now ! notation is used and remains compatible with other search engines).
Take a look to this tutorial, is an example of a simple ItsNat SPI site but you can pick some ideas for other frameworks, this example is SEO compatible for any web crawler.
The hard problem is to generate any (or selected) "AJAX page state" as plain HTML for SEO, in ItsNat is very easy and automatic, the same site is in the same time SPI or page based for SEO (or when JavaScript is disabled for accessibility). With other web frameworks you can ever follow the double site approach, one site is SPI based and another page based for SEO, for instance Twitter uses this "double site" technique.
I would be very careful if you are considering adopting this hashbang convention.
Once you hashbang, you can’t go back. This is probably the stickiest issue. Ben’s post put forward the point that when pushState is more widely adopted then we can leave hashbangs behind and return to traditional URLs. Well, fact is, you can’t. Earlier I stated that URLs are forever, they get indexed and archived and generally kept around. To add to that, cool URLs don’t change. We don’t want to disconnect ourselves from all the valuable links to our content. If you’ve implemented hashbang URLs at any point then want to change them without breaking links the only way you can do it is by running some JavaScript on the root document of your domain. Forever. It’s in no way temporary, you are stuck with it.
You really want to use pushState instead of hashbangs, because making your URLs ugly and possibly broken -- forever -- is a colossal and permanent downside to hashbangs.
To have a good follow-up about all this, Twitter - one of the pioneers of hashbang URL's and single-page-interface - admitted that the hashbang system was slow in the long run and that they have actually started reversing the decision and returning to old-school links.
Article about this is here.
I always assumed the ! just indicated that the hash fragment that followed corresponded to a URL, with ! taking the place of the site root or domain. It could be anything, in theory, but it seems the Google AJAX Crawling API likes it this way.
The hash, of course, just indicates that no real page reload is occurring, so yes, it’s for AJAX purposes. Edit: Raganwald does a lovely job explaining this in more detail.
I couldn't find an answer to this on the web. I have a site, where I try to avoid hard refreshes as much as possible. It's a sequences of photos, and upon a user click of a central div, a little page (a RoR partial) loads within that div with a new photo in it.
The user keeps clicking, the photo keeps changing, and the URL of the page never changes. The title of the photo does change though. And so I want the web crawlers to see this...
Is there any advantage to having a hard refresh or not in this scenario? Will the Web Crawlers see the title of the photo in the div, and index my home page? Or at least the url of the inner div?
I hope this makes sense! Thanks!
It all depends on what you mean by a hard refresh. If all of the pictures, and their related data (title etc.) are loaded when the page first loads, and the click is just a javascript event that changes the css a bit to display the next picture then that has no negative effect on SEO. If clicking that link makes an ajax request back to your server to retrieve the image, then it will never get picked up by the search engine web crawler, and will not contribute to SEO.
If you aren't sure if this click is an ajax request, or just a css change, you can look at your html source to figure it out. If all your image tags are in your html source then it's not making an ajax request. If you only see one (or zero) then it is making an ajax request.
If the page title would never change, then there's no benefit. But if you're loading a new image, the page title should change for optimal SEO.
There's a workaround, though. Just make it to where you can access the images specifically with a static page and make sure Google spiders it. You can keep the normal page flow as-is using this method.
Edit: I should add that I had a site that got 60% of it's traffic from Google Image searches, so I'd say you'd definitely want them indexed separately.