I have a bunch of rails models that I'm re-writing into a single model to simplify my code and reduce unnecessary tables.
I'm wondering what the best way to delete a model class and its table is. I want past migrations to still succeed, but I don't want to leave the empty models lying around.
Do I have to manually delete the old migrations that reference these models, then manually delete the class files?
Does anyone have any tips for the best way to do this?
All in one solution.
Run the following commands:
rails destroy model ModelName
rails g migration DropTableModelName
The former will generate a new migration file which should looks like this:
class DropTableModelName < ActiveRecord::Migration
def change
drop_table :model_name
end
end
Now run db:migrate and you're done.
If you'd like to completely get rid of of a model and its table do this:
rails destroy model Name
The question is a bit stale now, but I just did:
rails destroy scaffold <ModelName> -p
The -p flag shows "pretend" output, which is good for seeing what will happen. Remove the '-p' flag and the results will match the output. This cleaned the entire collection of M-V-C files + testing + js files + the original migration, no problem.
I guess if you are one who likes to hand edit your migrations and include multiple steps in each, losing the original migration could break db:setup, so buyer beware. Keeping one action == one migration file should avoid this potential snafu.
What about doing ruby script/destroy model? That should take care of the model and the migration.
Depending on how far into development or production you are, you may want to migrate the models out safely using a migration to remove/backup data or what not. Then as bobbywilson0 suggested, using
script/destroy model
or if you rspec anything
script/destroy rspec_model
This will remove any spec tests as well.
Or you can always just drag them to the trash folder.
You can take a look at this one at rails guide.
But I suggest, if it is possible, you should delete the models and all references to the models. This will probably save time later as you don't need to maintain the dead code in the codebase.
If you'd rather have a manual based answer:
First run the following command to identify which migrations you want removed:
rake db:migrate:status
Feel free to grep -i on it too if you're confident of your naming scheme.
Make note of all the "add x to model name" and similar alterations to your Model. These can be removed using:
rails d migration AddXToModelName
Do this for every migration besides the initial create migration. The following command will take care of the initial create migration and the files associated with the model:
rails d model ModelName
Related
What is the best possible way to change name of table using migration and change name of all the files like controller, model and associations?
Will there be any issue when someone will try to run rails:db:migrate after cloning my repo?
What is the best possible way to change name of table using migration
To change the name of a table, you can run:
$ rails g migration change_[old_table_name]_to_[new_table_name]
Within the change method in the migration file generated, add this:
def change
rename_table :[old_table_name], :[new_table_name]
end
Change [old_table_name] and [new_table_name] in both cases.
(This part of the question has been answered here.)
will there be any issue when someone will try to run rails db:migrate after cloning my repo?
Nope. Keep the old migration files in place and generate a new one. That's the benefit of database migrations.
What is the best possible way to change name of all the files like controller, model and associations?
It's generally not too big of a deal to change a model name. Many text editors have the ability to search and replace within a directory.
And I would manually rename the filenames.
Here's a set of more detailed steps to make sure you've hit everything that needs to be changed.
I created a model for comments at the start of a project, but have now come to the realisation I need to create some polymorphic relations so I can use comments with a number of other models as well. Considering the the code I already have etc, I'm thinking it might be easier for me to just start again from scratch so I can build all the views/controllers etc in the correct way for my new polymorphic world.
I see that I can run rails destroy model comments to achieve this but I have two questions on that:
Will this delete the model, migrations AND the actual DB table?
What are the implications when I want to create a new model with the exact same name?
In order to completely remove all columns &
tables that migration has created you need to run:
rails db:migrate:down VERSION=012345678 (where 012345678 should be the version number of your migration)
.............................
rails destroy model Comments
will delete your Model, pending migration, tests and fixtures
So destroy it's the opposite of generate:
$ bin/rails destroy model Oops
invoke active_record
remove db/migrate/20120528062523_create_oops.rb
remove app/models/oops.rb
invoke test_unit
remove test/models/oops_test.rb
remove test/fixtures/oops.yml
And, you can now create a new Model with the same name, as there's no trace of your previous one :)
If you have already migrated the database after creating the model:
First, rollback the changes to the database:
rake db:migrate:down VERSION=20100905201547
where version is the timestamp identifying the migration. For example, if your migration file is called 20170411182948_create_comments.rb then your version parameter should be 20170411182948
Then run
rails destroy model comments
The first command will delete the table from the actual database. The second command will delete the model and the migration file. Make sure you run them in that order as the first command is dependent on the migration file to perform the rollback (which is deleted during the second command).
If you have have not migrated the database:
The table would not have been added to your database. You can go ahead and delete your model and migration files manually or use the destroy command.
You might need to remove the table thoroughly.
Run this :
sqlite3 db/development.sqlite3
Then :
sqlite> drop table table_name;
sqlite> .quit
I was attempting to add a tagging model to my rails blog. But I accidentally generated a "Tags.rb" model as opposed to "Tag.rb", after reading the guide I realized that making "tag" plural was a mistake when it comes to model. I rolled back the migration using
rake db:rollback
and then
rails destroy model Tags.rb
and this was what i got back
invoke active_record
remove /home/migration/templates/create_table_migration.rb
remove app/models/tags.rb.rb
invoke test_unit
remove test/models/tags.rb_test.rb
remove test/fixtures/tags.rbs.yml
When I come back to the model folder though its still there.
Please help :)
Just give
rails destroy model Tag
Try using tags plural without the additional .rb, like
rails destroy model Tags
Hope this helps
You can manually delete the files, or just manually remove the "s"s.
try this
bundle exec rake db:rollback
and then delete your model as
rails destroy model <model_name>
now totaly deleted.
You can delete the migration files in migrate folder and model in your model folder and then you can again create new one which you wants.
you have to run that commands
rails g model tag
Then migrate database
rake db:migrate
First off, when generating a Rails model using rails generate model, don't add .rb to the end of the model name. Rails automatically does that so if you add .rb yourself then you end up with a model named Tag.rb.rb, which is invalid.
You're running the remove generator with "Tags.rb". Did you generate the model originally using rails generate model Tags.rb? If you did, then running rails destroy model Tags.rb will hopefully remove all the files, but since the model name is invalid, it might not work as expected (your use case is outside the intended use case of the generator). If you originally generated the model using rails generate model Tags, then running rails destroy model Tags should work.
If you originally invoked rails generate model Tags.rb, and running the remove command isn't working (which again, in understandable given that Tags.rb is an invalid name--would have been nice if the generator had originally prohibited you from generating a Tags.rb.rb file, but you can't have everything):
If you can afford to destroy your database and rerun all the migrations, the easy solution will be to manually remove the added files, destroy the database, and rerun all migrations. Then you can add the correct model using rails generate model Tag.
If you can't afford to destroy your database, then you'll need to manually find the problem migration in the migration's folder, run the down command on that migration, and then manually delete that migration file and all the other files.
I have a question regarding my migrations in rails.
Normally when i want to add a colum to a model for i dont make extra migrations but instead i perform this steps:
rake db:rollback
next i change the migration file in db/migrations and rerune:
rake db:migrate
The biggest problem is that when i do this i loose my data.
Previous i wrote migrations from the command line with for example
rake g migration Add_Column_House_to_Users house:string
The problem with this approach is that my db/migrations folder afterwards get very large and not very clear! I mean at the end i dont know wich variables the object has! Im not an expert in rails and would like to ask you how to keep the overview over the migrations!Thanks
Just a minor thought - I just use the file db/migrate/schema.rb to determine whats in the database as opposed to tracking through the migrations
You definitely shouldn't use db:rollback with a table with existing data.
I have a few production RonR apps with a ton of data and there are 100+ entries in the migrations table and adding new migrations to tweak tables is the rails way to do things. Not sure what you mean by lucid, but your schema and data model are going to change over time and that is ok and expected.
One tip. The migrations are great, but they are just the beginning, you can include complex logic as needed to fix your existing data (like so)
Changing data in existing table:
def up
add_column :rsvps, :column_name_id, :integer
update_data
end
def update_data
rsvps = Rsvp.where("other_column is not null")
rsvps.each do |rsvp|
invite = Blah.find(rsvp.example_id)
...
rsvp.save
end
end
Another tip: backup your production database often (should do this anyway), but use it to test all of your migrations before deploying. I run scripts like this all the time for local testing:
mysql -u root -ppassword
drop database mydatabase_dev;
create database mydatabase_dev;
use mydatabase_dev;
source /var/www/bak/mydatabase_backup_2013-10-04-16.28.06.sql
exit
rake db:migrate
I am currently working on a rails app where we are using mongoid/mongoDB on the back-end. I understand that I don't need ActiveRecord like migration to migrate the schema, but I do need to migrate data as I change mongoid model definitions. Is anyone else out there running into the same scenario, if so how are you handling it?
Even though you're not making schema changes, you may need to move data between fields, or remove fields that are no longer used in the codebase. It's nice to have migrations that you can run when you deploy new code. I recommend using a gem called mongoid_rails_migrations. This provides you with migration generators like you're used to and provides some organization to migrating data.
class MyMigration < Mongoid::Migration
def self.up
MyModel.all.each do |model|
# label was renamed to name
model.set :name, model[:label] # copy the data from the old field to the new one
model.remove_attribute :label # remove the old field from the document
model.save!
end
end
end
Write a custom rake task to migrate the data as needed
This question addresses the same issue of creating custom migrations in a mongoid setup.
Runtime changing model with mongodb/mongoid
I had the some scenario recently, where I have to do some data migration only once (basically update dirty data);
So what I did have a mongoid migrations in /db/migrate/ and override the db:migrate task so that it creates a collection in mongo db of that app itself, say "migrations", that record the migration that got fired, with that, none of the migration will run again, and you can keep adding migrations with some hierarchy (if in case migration is interdependent).