I followed the explanation on the sIFR wiki, but can't seem to get accented characters to display in my Flash movie. I opened up the Character Embedding palette, pasted "ÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýþÿ" into the "Include these characters" field after the ampersand, hit "OK", then re-exported the .SWF.
The characters still don't render in my sIFR file--any suggestions? I'm running r436.
have you tried checking the 'Basic Latin' or 'Latin I' boxes (just for sanity check?)
I've just looked through mine and I use 'Latin I'.
could be that the encoding between the webpage/javascript and flash isn't picking up the special chars - have you debugged your javascript to see what's being passed in?
[edit] what is the webpage encoding set to?[/edit]
Perhaps the font you're using just doesn't include those characters? Frequently, fonts will support just ascii.
As jeremy said, the major issue i've seen with sifr and charecters is that special charecters aren't part of the font you are using.
One way to test is run your current method with another standard font such as arial, if it works then it's probably down to your font.
What font is it?
Secondly when making the font glyphs inside flash you have to change the settings to include any foreign characters to insure they are within the font flash movie. most none standard characters are removed as it keeps the file size of the swf font file down.
Unicode escape sequences?
or maybe check a url encode chart
when you view the generated source (below) you'll see that the chars are being encoded by javascript...
content=This%2520is%2520an%2520embedding%2520test%253A%253Cbr%253E%25C3%25C4%25C5%25C6%25C7%25C8%25C9%25CA%25CB%25CC%25CD%25CE%25CF
can you switch on HTML on the text field to see if they show up?
Checking Latin I was mentioned, what about Latin Extended A, Extended B and Add'l? Cmd+clicking Punctuation, Basic Latin, plus all of the other Latin options may get you your missing characters.
I suspect its a problem with Flash. If I go to your example page (http://unstoppablerobotninja.com/demos/sifr-encode/), right-click on the Flash movie, and copy to the clipboard, this is the output:
This is an embedding test:
ÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýþÿ
Did it work?
Which to me indicates that the characters are ending up just fine in the Flash movie, but they're not being rendered.
Can Flash render these characters if you use static publishing for some other Flash movie?
I have the same problem with a dynamic text field not rendering special characters, despite the field being set up correctly and the specific characters required being embedded in the field.
I noticed that HTML source text which is formatted to appear as Bold (i.e. using tags) creates this problem - the same text without Bold results in the special chars being rendered correctly (although obviously not in Bold :)
I tried various things including using the unicode reference and exporting the Bold variant of the font (Verdana) but nothing helps, so I think it's a Flash bug.
Of course, knowing this doesn't solve the problem if you need to use a Bold font, like I do - I'm still looking for solutions and will post back if I find something.
Good luck ;)
Solving the Bold issue is easy. Special characters not appearing is another problem entirely and one in which we are encountering currently.
Here's the deal with bold (and italic):
If you use bold or italic tags in the HTML, Flash has not necessarily embedded the bold and italic version of the font. What you have to do is create some hidden dynamic text fields that have the bold and italic versions of the font embedded. These hidden text fields can be placed in a frame past the end of the timeline so that they don't appear at runtime.
A related problem is when you click the B (for bold) in the properties panel and insert HTML text into the textfield without a <b> tag. Flash will embed the bold font into the SWF, but if you don't insert the <b> tag in your text, Flash will render it with a non-bold font (which won't appear because it wasn't embedded).
Unfortunately, we have a situation where a dynamic text field was created with one font, and if we change it to any other font, it doesn't render. Special characters, such as the ® symbol, don't render, even though they are embedded in the font.
This is with Flash CS3 and AS2.
Related
When I use my fonts outside of user controls I have them loading correctly. But when the word has accent and is inside UserControl the font is appearing in bold, I've tested more than one font and the problem happens.
In the image I inserted a sentence written on top of the whole frame in the same way as a sentence written inside a UserControl, what is outside proves that the accents work without being bold and inside shows that all the words that are accented are in bold.
The problem only happens on iOS.
I found the problem. I had edited some texts in another editor (VSCode) and also copied some others from another platform that we used, the problem happened due to the encode of these other tools, when pasting in VStudio it caused the problem.
Just rewriting the texts directly by VStudio and the problem has been fixed.
I want to use non-English characters in Godot, but when I write them (In every node, like a Label or a Button) and run the project, the text does not display. For example, I write some Arabic characters in a Label and run the project, but I do not see anything. But I can see the characters in editor separately and reversely. ("عالم" is displayed "م ل ا ع")
I know that this problem is discussed on GitHub, but there was not any good solution. Please advise me a good and simple solution to solve this problem. I think it is not solved so far.
The default Label font in Godot doesn't support non-ASCII characters.
You can try to change the font in your Label node to one that supports non-ASCII symbols by picking a font from your computer, or if it doesn't exist on your device, uploading it from some site like Google Fonts, and choosing an arabic-supporting font, like Amiri.
After choosing the font for your Label node, open the Custom Fonts property in the editor of the node, and create a DynamicFont, and in Font => Font Data press Load and choose your font in the opened window in the file system (.ttf or any another font extension).
I am creating PDF with pre filled values in Chinese but when opening the PDF all the textfields containing Chinese text are empty. When focusing a textfield the Chinese text comes visible but is hided again when unfocusing the field. What could be the issue?
Please share some more info, as there could be more than one reason why the appearances aren't generated by iText.
A. The first reason is explained in the StackOverflow question "AcroForm values missing after flattening". In this case, the PDF contains a parameter that instructs iText not to generate appearances, which would explain why you don't see any value up until you click the field, in which case the viewer will create them.
B. The second reason is explained in section 8.3.3 (entitled "Text fields and fonts") of my book. In this case, the parameter in the PDF doesn't prevent the creation of field appearances, but iText fails to do so because you're not providing a font that knows how to display the Chinese characters.
See for instance figure 8.3 and 8.4 of the book.
In figure 8.3, you see that Chinese text isn't displayed in the upper window. By fixing the form (using two different strategies), the Chinese text appears in the lower two windows. Note that the Chinese text won't appear in all viewers in the case of the middle window.
In figure 8.4, you see that Korean text isn't displayed in the upper window, nor in the third window. In all other windows, different strategies were used to fix this problem:
It would lead us too far to discuss all the different strategies in an answer on SO. Instead, please take a look at the TextFontFields example (for the C# version, please take a look at the ported examples). My guess is that you'll benefit most from the AddSubstitutionFont() method, provided that you use a font of which a subset will be embedded in the document (in the example arialuni.ttf is used).
In case of A., the phenomenon also concerns other languages. In case of B., the parameter is correct, but you're not providing a font that can be used to generate the appearance.
I want to use a special character on an iOS button. When I insert it from special characters collection located in Edit/Special Characters menu it looks like this:
But after I exit the edit mode or run the app on device the character turns into this:
It looks like it uses different font. Is there a way to fix it?
Open up the character viewer (you may need to enable this in the Settings / Language)
You can inspect the arrows in here, and then check the font variations.
Once you've located the font you want, apply that to the label. I suspect you want Lucida Grande Bold.
I have problem with hyperlink font format in word 2003/2007 maybe it is in other too but i didn't try it.
First i create hyperlink in my document, then i change format of hyperlinks in
Styles and Formatting
for example: Bold, Italic size: 10, font: Webdings. Everything is ok, format is changed.
Problem happens when i add next hyperlink through ctrl + k (or insert hyperlink it doesnt matter). It accepts the most of format. It is Bold, Italic, even change color works, but font always stays as Times New Roman 12.
when i change format of hyperlink after this, the first hyperlink is ok. Changed color, styles an font. The others that were added later changes their color, style but not font. It is still Times new Roman 12.
When i select them they are style of hyperlink. When i set them as style hyperlink again (e.g. with enter), then they change its font to webdings too, but i need to accept this font without this, because i want to generate document with visual basic from template, and hyperlinks that are already in template accept new font in template but hyperlinks added with VB doesnt accept new font. And always select added hyperlink and set its type to hyperlink again ... it seams a bit wierd to me...
Does anybody know solution for this problem? i am trying to google it for two days and without success...
Edit: I found out right now, that it doesn't set format Times new roman 12, but it set the same format as it is set in Normal font. But format is shown to be set to hyperlink not to Normal. but again when i changed normal format it doesnt accept change to allready created hyperlinks, but only accept it to new one... i dont know but i have feel that it works really wierd and all this rules doesnt apply everytime...