I have a VPS which is hosting (currently) 5 different rails applications, all with different domains. To make them work I've added one server {} listener per app in my nginx config file. I've left everything else as default, for instance there's only one nginx worker process.
Concurrently, I also have 2 rails workers for one of the apps.
Now, this works as is, but performances are low, in particular speed. How could I make my apps quicker by adhering to my constraints?
Thanks!
Your problem is that you are deep into swap. The slowness you experiencing switching apps is the system loading the requested app from swap into physical memory.
To address this, you can observe who is hogging the memory (also using 'top'), and address that. It's possible you'll find some things to tune, but also quite possible you'll find that you are near the physical limits of what's possible without significant architectural changes.
If your time is worth much, your best course of action will be to upgrade to an instance with at least a 1GB of memory, because you are already using nearly that much.
The nginx "worker_processes" should be set to the number of cores that you have available to work with. You mentioned you had it set to 1. Do you have more cores than that?
We are running 2 rails application on server with 4GB of ram. Both servers use rails 3.2.1 and when run in either development or production mode, the servers eat away ram at incredible speed consuming up-to 1.07GB ram each day. Keeping the server running for just 4 days triggered all memory alarms in monitoring and we had just 98MB ram free.
We tried active-record optimization related to bloating but still no effect. Please help us figure out how can we trace the issue that which of the controller is at fault.
Using mysql database and webrick server.
Thanks!
This is incredibly hard to answer, without looking into the project details itself. Though I am quite sure you won't be using Webrick in your target production build(right?), so check if it behaves the same under Passenger or whatever is your choice.
Also without knowing the details of the project I would suggest looking at features like generating pdfs, csv parsing, etc. Seen a case, where generating pdf files have been eating resources in a similar fashion, leaving like 5mb of not garbage collected memory for each run.
Good luck.
Recently our ruby on rails application was upgraded to 2.3.8. We also replaced Mongrel/Mongrel cluster with Phusion Passenger during upgrade.
Whenever we try to deploy our application, it seems to be responding faster initially but response time gradually increases. We also noticed that cpu usage on the database box spiking to 400% and lot of requests waiting in global queue. This seems to be happening only in our production environment.
Can anyone let me know how I should go about debugging this issue?
Is there anyway we can restrict the number of connections between passenger and DB?
Also is there a way we can setup connection pooling in passenger?
Thanks,
Sivakumar.
I don't think the issue is with Passenger. If you are having a large spike on your DB box CPU, your issue probably lies there. Without more information about your database it's hard to give you specifics, but here are a few things you could try:
Run top and check how much of your total memory the mysqld or other database process is consuming. If this amount is not high then you probably need to tune MySQL settings to take advantage of the RAM on your DB box.
Analyze your running database queries with the mytop command. You might have some queries that are hogging all of your system resources or causing lots of swapping.
Look through your MySQL slow log and see if you have queries that are taking over 1 second to run.
Check your database engines. Are you using MYISAM and/or InnoDB? You might need to tune your database differently so that it can allocate the proper amount of memory and resources to each engine.
Consult a DBA. They'll be able to take a look at your usage and application and tell you more definitively if the issue lies with your database or application.
P.S: I would recommend upgrading to Passenger 3, it performs better than Passenter 2.
I'm running a Rails app through Phusion Passenger (mod_rails) which will run smoothly for a while, then suddenly slow to a crawl (one or two requests per hour) and become unresponsive. CPU usage is low throughout the whole ordeal, although I'm not sure about memory.
Does anyone know where I should start to diagnose/fix the problem?
Update: restarting the app every now and then does fix the problem, although I'm looking for a more long-term solution. Memory usage gradually increases (initially ~30mb per instance, becomes 40mb after an hour, gets to 60 or 70mb by the time it crashes).
New Relic can show you combined memory usage. Engine Yard recommends tools like Rack::Bug, MemoryLogic or Oink. Here's a nice article on something similar that you might find useful.
If restarting the app cures the problem, looking at its resource usage would be a good place to start.
Sounds like you have a memory leak of some sort. If you'd like to bandaid the issue you can try setting the PassengerMaxRequests to something a bit lower until you figure out what's going on.
http://www.modrails.com/documentation/Users%20guide%20Apache.html#PassengerMaxRequests
This will restart your instances, individually, after they've served a set number of requests. You may have to fiddle with it to find the sweet spot where they are restarting automatically before they lock up.
Other tips are:
-Go through your plugins/gems and make sure they are up to date
-Check for heavy actions and requests where there is a lot of memory consumption (NewRelic is great for this)
-You may want to consider switching to REE as it has better garbage collection
Finally, you may want to set a cron job that looks at your currently running passenger instances and kills them if they are over a certain memory threshold. Passenger will handle restarting them.
I have a simple Rails app deployed on a 500 MB Slicehost VPN. I'm the only one who uses the app. When I run it on my laptop, it's fast enough. But the deployed version is insanely slow. It take 6 to 10 seconds to load the login screen.
I would like to find out why it's so slow. Is it my code? (Don't think so because it's much faster locally, but maybe.) Is it Slicehost's server being overloaded? Is it the Internet?
Can someone suggest a technique or set of steps I can take to help narrow down the cause of this problem?
Update:
Sorry forgot to mention. I'm running it under CentOS 5 using Phusion Passenger (AKA mod_rails or mod_rack).
If it is just slow on the first time you load it is probably because of passenger killing the process due to inactivity. I don't remember all the details but I do recall reading people who used cron jobs to keep at least one process alive to avoid this lag that can occur with passenger needed to reload the environment.
Edit: more details here
Specifically - pool idle time defaults to 2 minutes which means after two minutes of idling passenger would have to reload the environment to serve the next request.
First, find out if there's a particularly slow response from the server. Use Firefox and the Firebug plugin to see how long each component (including JavaScript and graphics) takes to download. Assuming the main page itself is what is taking all the time, you can start profiling the application. You'll need to find a good profiler, and as I don't actually work in Ruby on Rails, I can't suggest any: google "profile ruby on rails" for some options.
As YenTheFirst points out, the server software and config you're using may contribute to a slowdown, but A) slicehost doesn't choose that, you do, as Slicehost just provides very raw server "slices" that you can treat as dedicated machines. B) you're unlikely to see a script that runs instantly suddenly take 6 seconds just because it's running as CGI. Something else must be going on. Check how much RAM you're using: have you gone into swap? Is the login slow only the first time it's hit indicating some startup issue, or is it always that slow? Is static content served slow? That'd tend to mean some network issue (either on the Slicehost side, or your local network) is slowing things down, assuming you're not in swap.
When you say "fast enough" you're being vague: does the laptop version take 1 second to the Slicehost 6? That wouldn't be entirely surprising, if the laptop is decent: after all, the reason slices are cheap is because they're a fraction of a full server. You're using probably 1/32 of an 8 core machine at Slicehost, as opposed to both cores of a modern laptop. The Slicehost cores are quick, but your laptop could be a screamer compared to 1/4 of core. :)
Try to pint point where the slowness lies
1/ application is slow, or infrastructure (network + web server)
put a static file on your web server, and access it through your browser
2/ If it is fast, it is probable a problem with application + server configuration.
database access is slow
try a page with a simpel loop: is it slow?
3/ If it slow, it is probably your infrastructure. You can check:
bad network connection: do a packet capture (with Wireshark for example) and look for retransmissions, duplicate packets, etc.
DNS resolution is slow?
server is misconfigured?
etc.
What is Slicehost using to serve it?
Fast options are things like: Mongrel, or apache's mod_rails (also called passenger phusion or
something like that)
These are dedicated servers (or plugins to servers) which run an instance of your rails app.
If your host isn't using that, then it's probably defaulting to CGI. Rails comes with a simple CGI script that will serve the page, but it reloads the app for every page.
(edit: I suspect that this is the most likely case, that your app is running off of the CGI in /webapp_directory/public/dispatch.cgi, which would explain the slowness. This tends to be a default deployment on many hosts, since it doesn't require extra configuration on their part, but it doesn't give good performance)
If your host supports "Fast CGI", rails supports that too. Fast CGI will open a CGI session, and keep it open for multiple pages, so you get much better performance, but it's not nearly as good as Mongrel or mod_rails.
Secondly, is it in 'production' or 'development' mode? The easy way to tell is to go to a page in your app that gives an error. If it shows you a stack trace, it's in development mode, which is slower than production mode. Mongrel and mod_rails have startup options to determine whether to run the app in production or development mode.
Finally, if your database is slow for whatever reason, that will be a big bottleneck as well. If you do have a good deployment (Mongrel/mod_rails/etc.) in production mode, try looking into that.
Do you have a lot of data in your DB? I would double check that you have indexed all the appropriate columns- because this can make a huge difference. On your local dev system, you probably have a lot more memory than on your 500 mb slice, which would result in the DB running a lot slower if you have big, un indexed tables. You can also run the slow queries logger in MySql to pinpoint columns without indexes.
Other than that, yes- passenger will need to spool up a process for you if you have not been using the site recently. If this is the case, you should see a significant speed increase on second, and especially third and later page loads.
You might want to run a local virtual machine with 500 MB. Are you doing a lot of client-server interaction? Delays over the WAN are significant
You might want to check out RPM (there's a free "lite" version too) and/or New Relic's Tune Up.
Your CPU time is guaranteed by Slicehost using the Xen virtualization system, so it's not that. Don't have the other answers for you, sorry! Might try 'top' on a console while you're trying to access the page.
If you are using FireFox and doing localhost testing (or maybe even on LAN) you may want to try editing the network.dns.disableIPv6 setting.
Type about:config in the address bar and filter for network.dns.disableIPv6 and double-click to set to true.
This bug has been reported mainly from Vista OS's, but some others as well.
You could try running 'top' when you SSH in to see which process is heavy. If you also have problems logging you, perhaps you may try getting Statistics in the Slicehost manager.
If you discover it is MySQL's fault, consider decreasing the number of servers it can spawn.
512 seems decent for Rails application, you might have to check if you misconfigured too.