Char value in F# - f#

Lets say I have a string "COLIN".
The numeric value of this string would is worth:
3 + 15 + 12 + 9 + 14 = 53.
So
A = 1, B = 2, C = 3, and so on.
I have no idea how to even start in F# for this.
let mutable nametotal = 0
let rec tcalculate name =
name.ToString().ToCharArray()
|> Seq.length
Here is what I have so far. The seq.length is just there for testing to see if the toCharArray actually worked.

What you have is decent; here's another version:
#light
let Value (c:char) =
(int c) - (int 'A') + 1
let CalcValue name =
name |> Seq.sum_by Value
printfn "COLIN = %d" (CalcValue "COLIN")
// may be of interest:
printfn "%A" ("COLIN" |> Seq.map Value |> Seq.to_list)
It assumes the original input is uppercase. "int" is a function that converts a char (or whatever) to an int; Seq.sum_by is perfect for this.
I also show an example of using map, not sure what you're interested in.

If the 'mapping' is more arbitrary, you could use a strategy like the code below, where you can specify a data structure of what value each letter maps to.
#light
let table = [
'C', 3
'O', 15
'L', 12
'I', 9
'N', 14
]
let dictionary = dict table
let Value c =
match dictionary.TryGetValue(c) with
| true, v -> v
| _ -> failwith (sprintf "letter '%c' was not in lookup table" c)
let CalcValue name =
name |> Seq.sum_by Value
printfn "COLIN = %d" (CalcValue "COLIN")

I've found a hackish way to do this using the ascii value of the character, and getting the number from there but i think there might be a better way.
let tcalculate name =
name.ToString().ToLower().ToCharArray()
|> Seq.map (fun char -> Convert.ToInt32 char - 96)
|> Seq.sum
work's beautifully and maybe even more efficient then "mapping" but I'd like to view the solution I asked for
thanks all.

all you need to do, is make the string lowercase, turn it into a char array like you have done, loop through each letter, take the value of each char and subtract the value of 'a' and add one. that will make each letter have the value of its position in the alphabet.

I realize this is very old but I am recently learning F# and playing with the ideas in this question. Maybe someone will find it useful:
let table =
Seq.zip ['A'..'Z'] (Seq.initInfinite((+) 1))
|> Map.ofSeq
let calc (input : string) =
let s = input.ToUpper()
match s with
| _ when Seq.forall System.Char.IsLetter s ->
Some (Seq.sumBy (fun c -> table.[c]) s)
| _ -> None

let sumOfChar name = // F# functional answer
name
|> List.ofSeq // to char array
|> List.map (fun c -> int (System.Char.ToUpper c) - int 'A' + 1) // to value
|> List.fold (+) 0 // sum
sumOfChar "Herb" // 33
// Or simply this version:
let sumOfCharBy name =
let value c = int (System.Char.ToUpper c) - int 'A' + 1
List.sumBy value (List.ofSeq name)
sumOfCharBy "HerbM" // 46
// or simply:
let sumOfCharBy name =
name |> Seq.sumBy (fun c -> int (System.Char.ToUpper c) - int 'A' + 1)
sumOfCharBy "HMartin" // 83

Related

Convert integer to base 4 in F#

I want to convert a given integer into a base 4 string. For eg : In scala,
var str: String = Integer.toString(10, 4)
gives the output "22" ie 2*(4^1) + 2*(4^0) = 10
Im having difficulty doing this in F#. Any help is appreciated
let intToDigits baseN value : int list =
let rec loop num digits =
let q = num / baseN
let r = num % baseN
if q = 0 then
r :: digits
else
loop q (r :: digits)
loop value []
254
|> intToDigits 16
|> List.fold (fun acc x -> acc + x.ToString("X")) ""
|> printfn "%s"
254
|> intToDigits 4
|> List.fold (fun acc x -> acc + x.ToString()) ""
|> printfn "%s"
This outputs FE for the base-16 conversion and 3332 for the base-4 conversion. Note that ToString("X") works for up to base 16, so it could be used for the base-4 conversion too.
I adapted this int based solution from Stuart Lang's bigint example (which uses bigint.DivRem rather than integer operators).

F# problems calling a function that takes a integer and return a string

I'm pretty new to programming in F#, and I am working on a project at the moment, with a function that takes an integer and returns a string value.
My problem (se my code below) is that no matter what I do, I cant return the values of my str, calling my function.
let mulTable (n:int):string = string n
let mutable m = 1
let mutable str = ""
while m < 10 do
str <- "m\t" + str
m <- m + 1
printfn "%A" (mulTable str)
My idea here is that I want to store the value of m, in str, så that str in the end of my while loop contains the values of "1 2 3 4 5 6 7 8 9". But no matter what I try my printfn "%A" mulTable str, returns "this expressions was exspected to have type int, but here has type string". I have tried converting my str to a string in my mutable value like:
let mutable str = ""
let mutable str1 = str |> int
and then I try to call my str1 using function mulTable instead of calling str. But still it does not work.
What am I missing here? I've been trying every single possible solution I can think of, without being able to solve my problem.
A fix of your own algorithm could be:
let getSequenceAsString max =
let concat s x = sprintf "%s\t%i" s x
let mutable m = 1
let mutable str = ""
while m < max do
str <- concat str m
m <- m + 1
str
printfn "%A" (getSequenceAsString 10)
But as others have shown it's a lot of work that can be done more easily:
open System
let getSequenceAsString max =
String.Join("\t", [1..max-1])
If you want each number reverted as you ask for in a comment it could be done this way:
let getSequenceAsString min max =
let revert x =
let rec rev y acc =
match y with
| 0 -> acc
| _ -> rev (y / 10) (sprintf "%s%i" acc (y % 10))
rev x ""
String.Join("\t", ([min..max-1] |> List.map revert))
printfn "%A" (getSequenceAsString 95 105)
Gives:
"59 69 79 89 99 001 101 201 301 401"
You can easily join an array of strings into a string array, and then print it out if necessary.
open System
let xs = [1..9] |> List.map string
//you should avoid using mutable variables, and instead generate your list of numbers with an list comprehension or something similar.
String.Join("\t", xs)
//A little exploration of the List/Array/String classes will bring this method up: "concatenates the members of a collection using the separator string.
This gives me:
val it : string = "1 2 3 4 5 6 7 8 9"
I've adjusted the code to make it produce results similar to what you wanted:
let mulTable (n:int):string = string n
let mutable m = 1
let mutable str = ""
while m < 10 do
str <- mulTable m+ "\t" + str
m <- m + 1
printfn "%A" (str)
I've used your mulTable to convert m to string, but for printfn you don't need to use that, because str is already a string.
Still the result would be 9 8 7 6 5 4 3 2 1
There are more then one way to revert the string, one of them would be to split the string into an array of characthers and then revert the array. From resulting array we will build a new string again. It would look something like:
printf "%A" (new System.String(str.ToCharArray() |> Array.rev ))
Edit
To achieve the same result, I would suggest to use more functional style, using recursion and avoiding mutating variables.
let getNumbersString upperLimit =
let rec innerRecursion rem acc=
match rem with
| 0 -> acc
| _ -> innerRecursion (rem-1) (sprintf "%i "rem::acc)
innerRecursion upperLimit [] |> String.concat ""
getNumbersString 9
Will result in
val it : string = "1 2 3 4 5 6 7 8 9 "

F#: Testing whether two strings are anagrams

I am new to programming and F# is my first language.
Here is my code:
let areAnagrams (firstString: string) (secondString: string) =
let countCharacters (someString: string) =
someString.ToLower().ToCharArray() |> Array.toSeq
|> Seq.countBy (fun eachChar -> eachChar)
|> Seq.sortBy (snd >> (~-))
countCharacters firstString = countCharacters secondString
let testString1 = "Laity"
let testString2 = "Italy"
printfn "It is %b that %s and %s are anagrams." (areAnagrams testString1 testString2) (testString1) (testString2)
This is the output:
It is false that Laity and Italy are anagrams.
What went wrong? What changes should I make?
Your implementation of countCharacters sorts the tuples just using the second element (the number of occurrences for each character), but if there are multiple characters that appear the same number of times, then the order is not defined.
If you run the countCharacters function on your two samples, you can see the problem:
> countCharacters "Laity";;
val it : seq<char * int> = seq [('l', 1); ('a', 1); ('i', 1); ('t', 1); ...]
> countCharacters "Italy";;
val it : seq<char * int> = seq [('i', 1); ('t', 1); ('a', 1); ('l', 1); ...]
One solution is to just use Seq.sort and sort the tuples using both the letter code and the number of occurrences.
The other problem is that you are comparing two seq<_> values and this does not use structural comparison, so you'll need to turn the result into a list or an array (something that is fully evaluated):
let countCharacters (someString: string) =
someString.ToLower().ToCharArray()
|> Seq.countBy (fun eachChar -> eachChar)
|> Seq.sort
|> List.ofSeq
Note that you do not actually need Seq.countBy - because if you just sort all the characters, it will work equally well (the repeated characters will just be one after another). So you could use just:
let countCharacters (someString: string) =
someString.ToLower() |> Seq.sort |> List.ofSeq
Sorting the characters of the two strings gives you an easy solution but this could be a good example of recursion.
You can immediately exclude strings of different length.
You can also filter out all the occurrences of a char per iteration, by replacing them with an empty string.
let rec areAnagram (x:string) (y:string) =
if x.Lenght <> t.Lenght
then false else
if x.Lenght = 0
then true else
let reply = x.[0].ToString ()
areAnagram
(x.Replace (reply,""))
(y.Replace (reply,""))
The above should be faster than sorting for many use cases.
Anyway we can go further and transform it into a fast Integer Sorting without recursion and string replacements
let inline charToInt c =
int c - int '0'
let singlePassAnagram (x:string) =
let hash : int array = Array.zeroCreate 100
x |> Seq.iter (fun c->
hash.[charToInt c] <- (hash.[charToInt c]+1)
)
let areAnagramsFast
(x:string) (y:string) =
if x.Length <> y.Length
then false else
(singlePassAnagram x) =
(singlePassAnagram y)
Here is a fiddle

F# - string to int list returns ASCII values

i'm new to F# so please take it easy on me :)
I wish to convert a string to a list of ints, however, the code i've written returns a list of ints in their ASCII representation.
let input = "123456"
|> Seq.map int
|> Seq.map(fun(x) -> x * 2)
returns
98
100
102
104
106
108
I can't seem to find an int.Parse alternative in F#. Any help would be great
Being a .NET language, you can use the Char.GetNumericValue method directly
open System
let input = "123456"
|> Seq.map Char.GetNumericValue
|> Seq.map(fun(x) -> x * 2)
EDIT:
Apparently Int32.Parse does not accept a single Char. Updated my answer accordingly.
Yet another way:
"123456"
|> Seq.map (string >> int)
|> Seq.map ((*) 2)
Whenever you need to map a set of characters to their integer index in an ordered set, you can simply subtract the index of the first value in the set (in this case '1'), and thus avoid any library functions:
"123456"
|> Seq.map (fun c -> int c - int '1')
|> Seq.map (fun(x) -> x * 2);;
val it : seq<int> = seq [0; 2; 4; 6; ...]
The second mapped function can also be made point-free as:
"123456"
|> Seq.map (fun c -> int c - int '1')
|> Seq.map ((*) 2);;

Handy F# snippets [closed]

As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
There are already two questions about F#/functional snippets.
However what I'm looking for here are useful snippets, little 'helper' functions that are reusable. Or obscure but nifty patterns that you can never quite remember.
Something like:
open System.IO
let rec visitor dir filter=
seq { yield! Directory.GetFiles(dir, filter)
for subdir in Directory.GetDirectories(dir) do
yield! visitor subdir filter}
I'd like to make this a kind of handy reference page. As such there will be no right answer, but hopefully lots of good ones.
EDIT Tomas Petricek has created a site specifically for F# snippets http://fssnip.net/.
Perl style regex matching
let (=~) input pattern =
System.Text.RegularExpressions.Regex.IsMatch(input, pattern)
It lets you match text using let test = "monkey" =~ "monk.+" notation.
Infix Operator
I got this from http://sandersn.com/blog//index.php/2009/10/22/infix-function-trick-for-f go to that page for more details.
If you know Haskell, you might find yourself missing infix sugar in F#:
// standard Haskell call has function first, then args just like F#. So obviously
// here there is a function that takes two strings: string -> string -> string
startsWith "kevin" "k"
//Haskell infix operator via backQuotes. Sometimes makes a function read better.
"kevin" `startsWith` "K"
While F# doesn't have a true 'infix' operator, the same thing can be accomplished almost as elegantly via a pipeline and a 'backpipeline' (who knew of such a thing??)
// F# 'infix' trick via pipelines
"kevin" |> startsWith <| "K"
Multi-Line Strings
This is pretty trivial, but it seems to be a feature of F# strings that is not widely known.
let sql = "select a,b,c \
from table \
where a = 1"
This produces:
val sql : string = "select a,b,c from table where a = 1"
When the F# compiler sees a back-slash followed by a carriage return inside a string literal, it will remove everything from the back-slash to the first non-space character on the next line. This allows you to have multi-line string literals that line up, without using a bunch of string concatenation.
Generic memoization, courtesy of the man himself
let memoize f =
let cache = System.Collections.Generic.Dictionary<_,_>(HashIdentity.Structural)
fun x ->
let ok, res = cache.TryGetValue(x)
if ok then res
else let res = f x
cache.[x] <- res
res
Using this, you could do a cached reader like so:
let cachedReader = memoize reader
Simple read-write to text files
These are trivial, but make file access pipeable:
open System.IO
let fileread f = File.ReadAllText(f)
let filewrite f s = File.WriteAllText(f, s)
let filereadlines f = File.ReadAllLines(f)
let filewritelines f ar = File.WriteAllLines(f, ar)
So
let replace f (r:string) (s:string) = s.Replace(f, r)
"C:\\Test.txt" |>
fileread |>
replace "teh" "the" |>
filewrite "C:\\Test.txt"
And combining that with the visitor quoted in the question:
let filereplace find repl path =
path |> fileread |> replace find repl |> filewrite path
let recurseReplace root filter find repl =
visitor root filter |> Seq.iter (filereplace find repl)
Update Slight improvement if you want to be able to read 'locked' files (e.g. csv files which are already open in Excel...):
let safereadall f =
use fs = new FileStream(f, FileMode.Open, FileAccess.Read, FileShare.ReadWrite)
use sr = new StreamReader(fs, System.Text.Encoding.Default)
sr.ReadToEnd()
let split sep (s:string) = System.Text.RegularExpressions.Regex.Split(s, sep)
let fileread f = safereadall f
let filereadlines f = f |> safereadall |> split System.Environment.NewLine
For performance intensive stuff where you need to check for null
let inline isNull o = System.Object.ReferenceEquals(o, null)
if isNull o then ... else ...
Is about 20x faster then
if o = null then ... else ...
Active Patterns, aka "Banana Splits", are a very handy construct that let one match against multiple regular expression patterns. This is much like AWK, but without the high performance of DFA's because the patterns are matched in sequence until one succeeds.
#light
open System
open System.Text.RegularExpressions
let (|Test|_|) pat s =
if (new Regex(pat)).IsMatch(s)
then Some()
else None
let (|Match|_|) pat s =
let opt = RegexOptions.None
let re = new Regex(pat,opt)
let m = re.Match(s)
if m.Success
then Some(m.Groups)
else None
Some examples of use:
let HasIndefiniteArticle = function
| Test "(?: |^)(a|an)(?: |$)" _ -> true
| _ -> false
type Ast =
| IntVal of string * int
| StringVal of string * string
| LineNo of int
| Goto of int
let Parse = function
| Match "^LET\s+([A-Z])\s*=\s*(\d+)$" g ->
IntVal( g.[1].Value, Int32.Parse(g.[2].Value) )
| Match "^LET\s+([A-Z]\$)\s*=\s*(.*)$" g ->
StringVal( g.[1].Value, g.[2].Value )
| Match "^(\d+)\s*:$" g ->
LineNo( Int32.Parse(g.[1].Value) )
| Match "^GOTO \s*(\d+)$" g ->
Goto( Int32.Parse(g.[1].Value) )
| s -> failwithf "Unexpected statement: %s" s
Maybe monad
type maybeBuilder() =
member this.Bind(v, f) =
match v with
| None -> None
| Some(x) -> f x
member this.Delay(f) = f()
member this.Return(v) = Some v
let maybe = maybeBuilder()
Here's a brief intro to monads for the uninitiated.
Option-coalescing operators
I wanted a version of the defaultArg function that had a syntax closer to the C# null-coalescing operator, ??. This lets me get the value from an Option while providing a default value, using a very concise syntax.
/// Option-coalescing operator - this is like the C# ?? operator, but works with
/// the Option type.
/// Warning: Unlike the C# ?? operator, the second parameter will always be
/// evaluated.
/// Example: let foo = someOption |? default
let inline (|?) value defaultValue =
defaultArg value defaultValue
/// Option-coalescing operator with delayed evaluation. The other version of
/// this operator always evaluates the default value expression. If you only
/// want to create the default value when needed, use this operator and pass
/// in a function that creates the default.
/// Example: let foo = someOption |?! (fun () -> new Default())
let inline (|?!) value f =
match value with Some x -> x | None -> f()
'Unitize' a function which doesn't handle units
Using the FloatWithMeasure function http://msdn.microsoft.com/en-us/library/ee806527(VS.100).aspx.
let unitize (f:float -> float) (v:float<'u>) =
LanguagePrimitives.FloatWithMeasure<'u> (f (float v))
Example:
[<Measure>] type m
[<Measure>] type kg
let unitize (f:float -> float) (v:float<'u>) =
LanguagePrimitives.FloatWithMeasure<'u> (f (float v))
//this function doesn't take units
let badinc a = a + 1.
//this one does!
let goodinc v = unitize badinc v
goodinc 3.<m>
goodinc 3.<kg>
OLD version:
let unitize (f:float -> float) (v:float<'u>) =
let unit = box 1. :?> float<'u>
unit * (f (v/unit))
Kudos to kvb
Scale/Ratio function builder
Again, trivial, but handy.
//returns a function which will convert from a1-a2 range to b1-b2 range
let scale (a1:float<'u>, a2:float<'u>) (b1:float<'v>,b2:float<'v>) =
let m = (b2 - b1)/(a2 - a1) //gradient of line (evaluated once only..)
(fun a -> b1 + m * (a - a1))
Example:
[<Measure>] type m
[<Measure>] type px
let screenSize = (0.<px>, 300.<px>)
let displayRange = (100.<m>, 200.<m>)
let scaleToScreen = scale displayRange screenSize
scaleToScreen 120.<m> //-> 60.<px>
Transposing a list (seen on Jomo Fisher's blog)
///Given list of 'rows', returns list of 'columns'
let rec transpose lst =
match lst with
| (_::_)::_ -> List.map List.head lst :: transpose (List.map List.tail lst)
| _ -> []
transpose [[1;2;3];[4;5;6];[7;8;9]] // returns [[1;4;7];[2;5;8];[3;6;9]]
And here is a tail-recursive version which (from my sketchy profiling) is mildly slower, but has the advantage of not throwing a stack overflow when the inner lists are longer than 10000 elements (on my machine):
let transposeTR lst =
let rec inner acc lst =
match lst with
| (_::_)::_ -> inner (List.map List.head lst :: acc) (List.map List.tail lst)
| _ -> List.rev acc
inner [] lst
If I was clever, I'd try and parallelise it with async...
F# Map <-> C# Dictionary
(I know, I know, System.Collections.Generic.Dictionary isn't really a 'C#' dictionary)
C# to F#
(dic :> seq<_>) //cast to seq of KeyValuePair
|> Seq.map (|KeyValue|) //convert KeyValuePairs to tuples
|> Map.ofSeq //convert to Map
(From Brian, here, with improvement proposed by Mauricio in comment below. (|KeyValue|) is an active pattern for matching KeyValuePair - from FSharp.Core - equivalent to (fun kvp -> kvp.Key, kvp.Value))
Interesting alternative
To get all of the immutable goodness, but with the O(1) lookup speed of Dictionary, you can use the dict operator, which returns an immutable IDictionary (see this question).
I currently can't see a way to directly convert a Dictionary using this method, other than
(dic :> seq<_>) //cast to seq of KeyValuePair
|> (fun kvp -> kvp.Key, kvp.Value) //convert KeyValuePairs to tuples
|> dict //convert to immutable IDictionary
F# to C#
let dic = Dictionary()
map |> Map.iter (fun k t -> dic.Add(k, t))
dic
What is weird here is that FSI will report the type as (for example):
val it : Dictionary<string,int> = dict [("a",1);("b",2)]
but if you feed dict [("a",1);("b",2)] back in, FSI reports
IDictionary<string,int> = seq[[a,1] {Key = "a"; Value = 1; } ...
Tree-sort / Flatten a tree into a list
I have the following binary tree:
___ 77 _
/ \
______ 47 __ 99
/ \
21 _ 54
\ / \
43 53 74
/
39
/
32
Which is represented as follows:
type 'a tree =
| Node of 'a tree * 'a * 'a tree
| Nil
let myTree =
Node
(Node
(Node (Nil,21,Node (Node (Node (Nil,32,Nil),39,Nil),43,Nil)),47,
Node (Node (Nil,53,Nil),54,Node (Nil,74,Nil))),77,Node (Nil,99,Nil))
A straightforward method to flatten the tree is:
let rec flatten = function
| Nil -> []
| Node(l, a, r) -> flatten l # a::flatten r
This isn't tail-recursive, and I believe the # operator causes it to be O(n log n) or O(n^2) with unbalanced binary trees. With a little tweaking, I came up with this tail-recursive O(n) version:
let flatten2 t =
let rec loop acc c = function
| Nil -> c acc
| Node(l, a, r) ->
loop acc (fun acc' -> loop (a::acc') c l) r
loop [] (fun x -> x) t
Here's the output in fsi:
> flatten2 myTree;;
val it : int list = [21; 32; 39; 43; 47; 53; 54; 74; 77; 99]
LINQ-to-XML helpers
namespace System.Xml.Linq
// hide warning about op_Explicit
#nowarn "77"
[<AutoOpen>]
module XmlUtils =
/// Converts a string to an XName.
let xn = XName.op_Implicit
/// Converts a string to an XNamespace.
let xmlns = XNamespace.op_Implicit
/// Gets the string value of any XObject subclass that has a Value property.
let inline xstr (x : ^a when ^a :> XObject) =
(^a : (member get_Value : unit -> string) x)
/// Gets a strongly-typed value from any XObject subclass, provided that
/// an explicit conversion to the output type has been defined.
/// (Many explicit conversions are defined on XElement and XAttribute)
/// Example: let value:int = xval foo
let inline xval (x : ^a when ^a :> XObject) : ^b =
((^a or ^b) : (static member op_Explicit : ^a -> ^b) x)
/// Dynamic lookup operator for getting an attribute value from an XElement.
/// Returns a string option, set to None if the attribute was not present.
/// Example: let value = foo?href
/// Example with default: let value = defaultArg foo?Name "<Unknown>"
let (?) (el:XElement) (name:string) =
match el.Attribute(xn name) with
| null -> None
| att -> Some(att.Value)
/// Dynamic operator for setting an attribute on an XElement.
/// Example: foo?href <- "http://www.foo.com/"
let (?<-) (el:XElement) (name:string) (value:obj) =
el.SetAttributeValue(xn name, value)
OK, this has nothing to do with snippets, but I keep forgetting this:
If you are in the interactive window, you hit F7 to jump back to the code window (without deselecting the code which you just ran...)
Going from code window to F# window (and also to open the F# window) is Ctrl Alt F
(unless CodeRush has stolen your bindings...)
Weighted sum of arrays
Calculating a weighted [n-array] sum of a [k-array of n-arrays] of numbers, based on a [k-array] of weights
(Copied from this question, and kvb's answer)
Given these arrays
let weights = [|0.6;0.3;0.1|]
let arrs = [| [|0.0453;0.065345;0.07566;1.562;356.6|] ;
[|0.0873;0.075565;0.07666;1.562222;3.66|] ;
[|0.06753;0.075675;0.04566;1.452;3.4556|] |]
We want a weighted sum (by column), given that both dimensions of the arrays can be variable.
Array.map2 (fun w -> Array.map ((*) w)) weights arrs
|> Array.reduce (Array.map2 (+))
First line: Partial application of the first Array.map2 function to weights yields a new function (Array.map ((*) weight) which is applied (for each weight) to each array in arr.
Second line: Array.reduce is like fold, except it starts on the second value and uses the first as the initial 'state'. In this case each value is a 'line' of our array of arrays. So applying an Array.map2 (+) on the first two lines means that we sum the first two arrays, which leaves us with a new array, which we then (Array.reduce) sum again onto the next (in this case last) array.
Result:
[|0.060123; 0.069444; 0.07296; 1.5510666; 215.40356|]
Performance testing
(Found here and updated for latest release of F#)
open System
open System.Diagnostics
module PerformanceTesting =
let Time func =
let stopwatch = new Stopwatch()
stopwatch.Start()
func()
stopwatch.Stop()
stopwatch.Elapsed.TotalMilliseconds
let GetAverageTime timesToRun func =
Seq.initInfinite (fun _ -> (Time func))
|> Seq.take timesToRun
|> Seq.average
let TimeOperation timesToRun =
GC.Collect()
GetAverageTime timesToRun
let TimeOperations funcsWithName =
let randomizer = new Random(int DateTime.Now.Ticks)
funcsWithName
|> Seq.sortBy (fun _ -> randomizer.Next())
|> Seq.map (fun (name, func) -> name, (TimeOperation 100000 func))
let TimeOperationsAFewTimes funcsWithName =
Seq.initInfinite (fun _ -> (TimeOperations funcsWithName))
|> Seq.take 50
|> Seq.concat
|> Seq.groupBy fst
|> Seq.map (fun (name, individualResults) -> name, (individualResults |> Seq.map snd |> Seq.average))
DataSetExtensions for F#, DataReaders
System.Data.DataSetExtensions.dll adds the ability to treat a DataTable as an IEnumerable<DataRow> as well as unboxing the values of individual cells in a way that gracefully handles DBNull by supporting System.Nullable. For example, in C# we can get the value of an integer column that contains nulls, and specify that DBNull should default to zero with a very concise syntax:
var total = myDataTable.AsEnumerable()
.Select(row => row.Field<int?>("MyColumn") ?? 0)
.Sum();
There are two areas where DataSetExtensions are lacking, however. First, it doesn't support IDataReader and second, it doesn't support the F# option type. The following code does both - it allows an IDataReader to be treated as a seq<IDataRecord>, and it can unbox values from either a reader or a dataset, with support for F# options or System.Nullable. Combined with the option-coalescing operator in another answer, this allows for code such as the following when working with a DataReader:
let total =
myReader.AsSeq
|> Seq.map (fun row -> row.Field<int option>("MyColumn") |? 0)
|> Seq.sum
Perhaps a more idiomatic F# way of ignoring database nulls would be...
let total =
myReader.AsSeq
|> Seq.choose (fun row -> row.Field<int option>("MyColumn"))
|> Seq.sum
Further, the extension methods defined below are usable from both F# and from C#/VB.
open System
open System.Data
open System.Reflection
open System.Runtime.CompilerServices
open Microsoft.FSharp.Collections
/// Ported from System.Data.DatasetExtensions.dll to add support for the Option type.
[<AbstractClass; Sealed>]
type private UnboxT<'a> private () =
// This class generates a converter function based on the desired output type,
// and then re-uses the converter function forever. Because the class itself is generic,
// different output types get different cached converter functions.
static let referenceField (value:obj) =
if value = null || DBNull.Value.Equals(value) then
Unchecked.defaultof<'a>
else
unbox value
static let valueField (value:obj) =
if value = null || DBNull.Value.Equals(value) then
raise <| InvalidCastException("Null cannot be converted to " + typeof<'a>.Name)
else
unbox value
static let makeConverter (target:Type) methodName =
Delegate.CreateDelegate(typeof<Converter<obj,'a>>,
typeof<UnboxT<'a>>
.GetMethod(methodName, BindingFlags.NonPublic ||| BindingFlags.Static)
.MakeGenericMethod([| target.GetGenericArguments().[0] |]))
|> unbox<Converter<obj,'a>>
|> FSharpFunc.FromConverter
static let unboxFn =
let theType = typeof<'a>
if theType.IsGenericType && not theType.IsGenericTypeDefinition then
let genericType = theType.GetGenericTypeDefinition()
if typedefof<Nullable<_>> = genericType then
makeConverter theType "NullableField"
elif typedefof<option<_>> = genericType then
makeConverter theType "OptionField"
else
invalidOp "The only generic types supported are Option<T> and Nullable<T>."
elif theType.IsValueType then
valueField
else
referenceField
static member private NullableField<'b when 'b : struct and 'b :> ValueType and 'b:(new:unit -> 'b)> (value:obj) =
if value = null || DBNull.Value.Equals(value) then
Nullable<_>()
else
Nullable<_>(unbox<'b> value)
static member private OptionField<'b> (value:obj) =
if value = null || DBNull.Value.Equals(value) then
None
else
Some(unbox<'b> value)
static member inline Unbox =
unboxFn
/// F# data-related extension methods.
[<AutoOpen>]
module FsDataEx =
type System.Data.IDataReader with
/// Exposes a reader's current result set as seq<IDataRecord>.
/// Reader is closed when sequence is fully enumerated.
member this.AsSeq =
seq { use reader = this
while reader.Read() do yield reader :> IDataRecord }
/// Exposes all result sets in a reader as seq<seq<IDataRecord>>.
/// Reader is closed when sequence is fully enumerated.
member this.AsMultiSeq =
let rowSeq (reader:IDataReader) =
seq { while reader.Read() do yield reader :> IDataRecord }
seq {
use reader = this
yield rowSeq reader
while reader.NextResult() do
yield rowSeq reader
}
/// Populates a new DataSet with the contents of the reader. Closes the reader after completion.
member this.ToDataSet () =
use reader = this
let dataSet = new DataSet(RemotingFormat=SerializationFormat.Binary, EnforceConstraints=false)
dataSet.Load(reader, LoadOption.OverwriteChanges, [| "" |])
dataSet
type System.Data.IDataRecord with
/// Gets a value from the record by name.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
member this.Field<'a> (fieldName:string) =
this.[fieldName] |> UnboxT<'a>.Unbox
/// Gets a value from the record by column index.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
member this.Field<'a> (ordinal:int) =
this.GetValue(ordinal) |> UnboxT<'a>.Unbox
type System.Data.DataRow with
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnName:string) =
this.[columnName] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnIndex:int) =
this.[columnIndex] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (column:DataColumn) =
this.[column] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnName:string, version:DataRowVersion) =
this.[columnName, version] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnIndex:int, version:DataRowVersion) =
this.[columnIndex, version] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (column:DataColumn, version:DataRowVersion) =
this.[column, version] |> UnboxT<'a>.Unbox
/// C# data-related extension methods.
[<Extension; AbstractClass; Sealed>]
type CsDataEx private () =
/// Populates a new DataSet with the contents of the reader. Closes the reader after completion.
[<Extension>]
static member ToDataSet(this:IDataReader) =
this.ToDataSet()
/// Exposes a reader's current result set as IEnumerable{IDataRecord}.
/// Reader is closed when sequence is fully enumerated.
[<Extension>]
static member AsEnumerable(this:IDataReader) =
this.AsSeq
/// Exposes all result sets in a reader as IEnumerable{IEnumerable{IDataRecord}}.
/// Reader is closed when sequence is fully enumerated.
[<Extension>]
static member AsMultipleEnumerable(this:IDataReader) =
this.AsMultiSeq
/// Gets a value from the record by name.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
[<Extension>]
static member Field<'T> (this:IDataRecord, fieldName:string) =
this.Field<'T>(fieldName)
/// Gets a value from the record by column index.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
[<Extension>]
static member Field<'T> (this:IDataRecord, ordinal:int) =
this.Field<'T>(ordinal)
Handling arguments in a command line application:
//We assume that the actual meat is already defined in function
// DoStuff (string -> string -> string -> unit)
let defaultOutOption = "N"
let defaultUsageOption = "Y"
let usage =
"Scans a folder for and outputs results.\n" +
"Usage:\n\t MyApplication.exe FolderPath [IncludeSubfolders (Y/N) : default=" +
defaultUsageOption + "] [OutputToFile (Y/N): default=" + defaultOutOption + "]"
let HandlArgs arr =
match arr with
| [|d;u;o|] -> DoStuff d u o
| [|d;u|] -> DoStuff d u defaultOutOption
| [|d|] -> DoStuff d defaultUsageOption defaultOutOption
| _ ->
printf "%s" usage
Console.ReadLine() |> ignore
[<EntryPoint>]
let main (args : string array) =
args |> HandlArgs
0
(I had a vague memory of this technique being inspired by Robert Pickering, but can't find a reference now)
A handy cache function that keeps up to max (key,reader(key)) in a dictionary and use a SortedList to track the MRU keys
let Cache (reader: 'key -> 'value) max =
let cache = new Dictionary<'key,LinkedListNode<'key * 'value>>()
let keys = new LinkedList<'key * 'value>()
fun (key : 'key) -> (
let found, value = cache.TryGetValue key
match found with
|true ->
keys.Remove value
keys.AddFirst value |> ignore
(snd value.Value)
|false ->
let newValue = key,reader key
let node = keys.AddFirst newValue
cache.[key] <- node
if (keys.Count > max) then
let lastNode = keys.Last
cache.Remove (fst lastNode.Value) |> ignore
keys.RemoveLast() |> ignore
(snd newValue))
Creating XElements
Nothing amazing, but I keep getting caught out by the implicit conversion of XNames:
#r "System.Xml.Linq.dll"
open System.Xml.Linq
//No! ("type string not compatible with XName")
//let el = new XElement("MyElement", "text")
//better
let xn s = XName.op_Implicit s
let el = new XElement(xn "MyElement", "text")
//or even
let xEl s o = new XElement(xn s, o)
let el = xEl "MyElement" "text"
Pairwise and pairs
I always expect Seq.pairwise to give me [(1,2);(3;4)] and not [(1,2);(2,3);(3,4)]. Given that neither exist in List, and that I needed both, here's the code for future reference. I think they're tail recursive.
//converts to 'windowed tuples' ([1;2;3;4;5] -> [(1,2);(2,3);(3,4);(4,5)])
let pairwise lst =
let rec loop prev rem acc =
match rem with
| hd::tl -> loop hd tl ((prev,hd)::acc)
| _ -> List.rev acc
loop (List.head lst) (List.tail lst) []
//converts to 'paged tuples' ([1;2;3;4;5;6] -> [(1,2);(3,4);(5,6)])
let pairs lst =
let rec loop rem acc =
match rem with
| l::r::tl -> loop tl ((l,r)::acc)
| l::[] -> failwith "odd-numbered list"
| _ -> List.rev acc
loop lst []
Naive CSV reader (i.e., won't handle anything nasty)
(Using filereadlines and List.transpose from other answers here)
///Given a file path, returns a List of row lists
let ReadCSV =
filereadlines
>> Array.map ( fun line -> line.Split([|',';';'|]) |> List.ofArray )
>> Array.toList
///takes list of col ids and list of rows,
/// returns array of columns (in requested order)
let GetColumns cols rows =
//Create filter
let pick cols (row:list<'a>) = List.map (fun i -> row.[i]) cols
rows
|> transpose //change list of rows to list of columns
|> pick cols //pick out the columns we want
|> Array.ofList //an array output is easier to index for user
Example
"C:\MySampleCSV"
|> ReadCSV
|> List.tail //skip header line
|> GetColumns [0;3;1] //reorder columns as well, if needs be.
Date Range
simple but useful list of dates between fromDate and toDate
let getDateRange fromDate toDate =
let rec dates (fromDate:System.DateTime) (toDate:System.DateTime) =
seq {
if fromDate <= toDate then
yield fromDate
yield! dates (fromDate.AddDays(1.0)) toDate
}
dates fromDate toDate
|> List.ofSeq
toggle code to sql
More trivial than most on this list, but handy nonetheless:
I'm always taking sql in and out of code to move it to a sql environment during development. Example:
let sql = "select a,b,c "
+ "from table "
+ "where a = 1"
needs to be 'stripped' to:
select a,b,c
from table
where a = 1
keeping the formatting. It's a pain to strip out the code symbols for the sql editor, then put them back again by hand when I've got the sql worked out. These two functions toggle the sql back and forth from code to stripped:
// reads the file with the code quoted sql, strips code symbols, dumps to FSI
let stripForSql fileName =
File.ReadAllText(fileName)
|> (fun s -> Regex.Replace(s, "\+(\s*)\"", ""))
|> (fun s -> s.Replace("\"", ""))
|> (fun s -> Regex.Replace(s, ";$", "")) // end of line semicolons
|> (fun s -> Regex.Replace(s, "//.+", "")) // get rid of any comments
|> (fun s -> printfn "%s" s)
then when you are ready to put it back into your code source file:
let prepFromSql fileName =
File.ReadAllText(fileName)
|> (fun s -> Regex.Replace(s, #"\r\n", " \"\r\n+\"")) // matches newline
|> (fun s -> Regex.Replace(s, #"\A", " \""))
|> (fun s -> Regex.Replace(s, #"\z", " \""))
|> (fun s -> printfn "%s" s)
I'd love to get rid of the input file but can't even begin to grok how to make that happen. anyone?
edit:
I figured out how to eliminate the requirement of a file for these functions by adding a windows forms dialog input/output. Too much code to show, but for those who would like to do such a thing, that's how I solved it.
Pascal's Triangle (hey, someone might find it useful)
So we want to create a something like this:
1
1 1
1 2 1
1 3 3 1
1 4 6 4 1
Easy enough:
let rec next = function
| [] -> []
| x::y::xs -> (x + y)::next (y::xs)
| x::xs -> x::next xs
let pascal n =
seq { 1 .. n }
|> List.scan (fun acc _ -> next (0::acc) ) [1]
The next function returns a new list where each item[i] = item[i] + item[i + 1].
Here's the output in fsi:
> pascal 10 |> Seq.iter (printfn "%A");;
[1]
[1; 1]
[1; 2; 1]
[1; 3; 3; 1]
[1; 4; 6; 4; 1]
[1; 5; 10; 10; 5; 1]
[1; 6; 15; 20; 15; 6; 1]
[1; 7; 21; 35; 35; 21; 7; 1]
[1; 8; 28; 56; 70; 56; 28; 8; 1]
[1; 9; 36; 84; 126; 126; 84; 36; 9; 1]
[1; 10; 45; 120; 210; 252; 210; 120; 45; 10; 1]
For the adventurous, here's a tail-recursive version:
let rec next2 cont = function
| [] -> cont []
| x::y::xs -> next2 (fun l -> cont <| (x + y)::l ) <| y::xs
| x::xs -> next2 (fun l -> cont <| x::l ) <| xs
let pascal2 n =
set { 1 .. n }
|> Seq.scan (fun acc _ -> next2 id <| 0::acc)) [1]
Flatten a List
if you have something like this:
let listList = [[1;2;3;];[4;5;6]]
and want to 'flatten' it down to a singe list so the result is like this:
[1;2;3;4;5;6]
it can be done thusly:
let flatten (l: 'a list list) =
seq {
yield List.head (List.head l)
for a in l do yield! (Seq.skip 1 a)
}
|> List.ofSeq
List comprehensions for float
This [23.0 .. 1.0 .. 40.0] was marked as deprecated a few versions backed.
But apparently, this works:
let dl = 9.5 / 11.
let min = 21.5 + dl
let max = 40.5 - dl
let a = [ for z in min .. dl .. max -> z ]
let b = a.Length
(BTW, there's a floating point gotcha in there. Discovered at fssnip - the other place for F# snippets)
Parallel map
let pmap f s =
seq { for a in s -> async { return f s } }
|> Async.Parallel
|> Async.Run

Resources