F#: Testing whether two strings are anagrams - f#

I am new to programming and F# is my first language.
Here is my code:
let areAnagrams (firstString: string) (secondString: string) =
let countCharacters (someString: string) =
someString.ToLower().ToCharArray() |> Array.toSeq
|> Seq.countBy (fun eachChar -> eachChar)
|> Seq.sortBy (snd >> (~-))
countCharacters firstString = countCharacters secondString
let testString1 = "Laity"
let testString2 = "Italy"
printfn "It is %b that %s and %s are anagrams." (areAnagrams testString1 testString2) (testString1) (testString2)
This is the output:
It is false that Laity and Italy are anagrams.
What went wrong? What changes should I make?

Your implementation of countCharacters sorts the tuples just using the second element (the number of occurrences for each character), but if there are multiple characters that appear the same number of times, then the order is not defined.
If you run the countCharacters function on your two samples, you can see the problem:
> countCharacters "Laity";;
val it : seq<char * int> = seq [('l', 1); ('a', 1); ('i', 1); ('t', 1); ...]
> countCharacters "Italy";;
val it : seq<char * int> = seq [('i', 1); ('t', 1); ('a', 1); ('l', 1); ...]
One solution is to just use Seq.sort and sort the tuples using both the letter code and the number of occurrences.
The other problem is that you are comparing two seq<_> values and this does not use structural comparison, so you'll need to turn the result into a list or an array (something that is fully evaluated):
let countCharacters (someString: string) =
someString.ToLower().ToCharArray()
|> Seq.countBy (fun eachChar -> eachChar)
|> Seq.sort
|> List.ofSeq
Note that you do not actually need Seq.countBy - because if you just sort all the characters, it will work equally well (the repeated characters will just be one after another). So you could use just:
let countCharacters (someString: string) =
someString.ToLower() |> Seq.sort |> List.ofSeq

Sorting the characters of the two strings gives you an easy solution but this could be a good example of recursion.
You can immediately exclude strings of different length.
You can also filter out all the occurrences of a char per iteration, by replacing them with an empty string.
let rec areAnagram (x:string) (y:string) =
if x.Lenght <> t.Lenght
then false else
if x.Lenght = 0
then true else
let reply = x.[0].ToString ()
areAnagram
(x.Replace (reply,""))
(y.Replace (reply,""))
The above should be faster than sorting for many use cases.
Anyway we can go further and transform it into a fast Integer Sorting without recursion and string replacements
let inline charToInt c =
int c - int '0'
let singlePassAnagram (x:string) =
let hash : int array = Array.zeroCreate 100
x |> Seq.iter (fun c->
hash.[charToInt c] <- (hash.[charToInt c]+1)
)
let areAnagramsFast
(x:string) (y:string) =
if x.Length <> y.Length
then false else
(singlePassAnagram x) =
(singlePassAnagram y)
Here is a fiddle

Related

Second Taxicab Number Generator

I am attempting to generate a series of guesses for the second Taxicab number. What I want to do is is call the Attempt function on a series of integers in a finite sequence. I have my two questions about implementation in the comments.
A taxi cab number, in case your wondering, is the least number that satisfied the sum of 2 unique cubes in for n unique sets of 2 unique cubes. Ta(2) is 1729.
[<EntryPoint>]
let main argv =
let Attempt (start : int) =
let stop = start+20
let integerList = [start..stop]
let list = List.init 3 (fun x -> integerList.[x])
//Is there a simple way to make initialize the list with random indices of integerList?
let Cube x = x*x*x
let newlist = list |> List.map (fun x -> Cube x)
let partitionList (x : List<int>) (y : int) = List.sum [x.[y];x.[y+1]]
let intLIST = [0..2]
let partitionList' = [for i in intLIST do yield partitionList newlist i]
let x = Set.ofList partitionList'
let y = Set.ofList partitionList'
//I was going to try to use some kind of equality operator to determine whether the two sets were equal, which could tell me whether we had actually found a Taxicab number by the weakened definition.
System.Console.Write(list)
System.Console.Write(newlist)
let rnd = System.Random()
//My primary question is how can I convert a random to an integer to use in start for the function Attempt?
System.Console.ReadKey() |> ignore
printfn("%A") argv
0
Dirty way to initialize list with random indexes of another list:
let randomIndexes count myList =
let rand = System.Random()
seq {
for n = 1 to count do
yield rand.Next(List.length myList) }
|> Seq.distinct
//|> Seq.sort // if you need them sorted
|> List.ofSeq
let result = randomIndexes 5 [3;2;4;5]
printfn "%A" result

Unpack tuple into another tuple

Suppose I need to construct a tuple of length three:
(x , y, z)
And I have a function which returns a tuple of length two - exampleFunction and the last two elements of the tuple to be constructed are from this tuple.
How can I do this without having to call the exampleFunction two times:
(x, fst exampleFunction , snd exampleFunction)
I just want to do / achieve something like
(x, exampleFunction)
but it complains that the tuples have unmatched length ( of course )
Not looking at doing let y,z = exampleFunction()
There may be a built in function, but a custom one would work just as well.
let repack (a,(b,c)) = (a,b,c)
repack (x,exampleFunction)
I'm not sure it if worth a separate answer, but both answers provided above are not optimal since both construct redundant Tuple<'a, Tuple<'b, 'c>> upon invocation of the helper function. I would say a custom operator would be better for both readability and performance:
let inline ( +# ) a (b,c) = a, b, c
let result = x +# yz // result is ('x, 'y, 'z)
The problem you have is that the function return a*b so the return type becomes 'a*('b*'c) which is different to 'a*'b*'c the best solution is a small helper function like
let inline flatten (a,(b,c)) = a,b,c
then you can do
(x,examplefunction) |> flatten
I have the following function in my common extension file.
You may find this useful.
let inline squash12 ((a,(b,c) ):('a*('b*'c) )):('a*'b*'c ) = (a,b,c )
let inline squash21 (((a,b),c ):(('a*'b)*'c )):('a*'b*'c ) = (a,b,c )
let inline squash13 ((a,(b,c,d)):('a*('b*'c*'d))):('a*'b*'c*'d) = (a,b,c,d)
let seqsquash12 (sa:seq<'a*('b*'c) >) = sa |> Seq.map squash12
let seqsquash21 (sa:seq<('a*'b)*'c >) = sa |> Seq.map squash21
let seqsquash13 (sa:seq<'a*('b*'c*'d)>) = sa |> Seq.map squash13
let arrsquash12 (sa:('a*('b*'c) ) array) = sa |> Array.map squash12
let arrsquash21 (sa:(('a*'b)*'c ) array) = sa |> Array.map squash21
let arrsquash13 (sa:('a*('b*'c*'d)) array) = sa |> Array.map squash13

F# Basics: Folding 2 lists together into a string

a little rusty from my Scheme days, I'd like to take 2 lists: one of numbers and one of strings, and fold them together into a single string where each pair is written like "{(ushort)5, "bla bla bla"},\n". I have most of it, i'm just not sure how to write the Fold properly:
let splitter = [|","|]
let indexes =
indexStr.Split(splitter, System.StringSplitOptions.None) |> Seq.toList
let values =
valueStr.Split(splitter, System.StringSplitOptions.None) |> Seq.toList
let pairs = List.zip indexes values
printfn "%A" pairs
let result = pairs |> Seq.fold
(fun acc a -> String.Format("{0}, \{(ushort){1}, \"{2}\"\}\n",
acc, (List.nth a 0), (List.nth a 1)))
Your missing two things. The initial state of the fold which is an empty string and you can't use list comprehension on tuples in F#.
let splitter = [|","|]
let indexes =
indexStr.Split(splitter, System.StringSplitOptions.None) |> Seq.toList
let values =
valueStr.Split(splitter, System.StringSplitOptions.None) |> Seq.toList
let pairs = List.zip indexes values
printfn "%A" pairs
let result =
pairs
|> Seq.fold (fun acc (index, value) ->
String.Format("{0}{{(ushort){1}, \"{2}\"}},\n", acc, index, value)) ""
fold2 version
let result =
List.fold2
(fun acc index value ->
String.Format("{0}{{(ushort){1}, \"{2}\"}},\n", acc, index, value))
""
indexes
values
If you are concerned with speed you may want to use string builder since it doesn't create a new string every time you append.
let result =
List.fold2
(fun (sb:StringBuilder) index value ->
sb.AppendFormat("{{(ushort){0}, \"{1}\"}},\n", index, value))
(StringBuilder())
indexes
values
|> string
Fold probably isn't the best method for this task. Its a lot easier to map and concat like this:
let l1 = "a,b,c,d,e".Split([|','|])
let l2 = "1,2,3,4,5".Split([|','|])
let pairs =
Seq.zip l1 l2
|> Seq.map (fun (x, y) -> sprintf "(ushort)%s, \"%s\"" x y)
|> String.concat "\n"
I think you want List.fold2. For some reason the List module has a fold2 member but Seq doesn't. Then you can dispense with the zip entirely.
The types of your named variables and the type of the result you hope for are all implicit, so it's difficult to help, but if you are trying to accumulate a list of strings you might consider something along the lines of
let result = pairs |> Seq.fold
(fun prev (l, r) ->
String.Format("{0}, \{(ushort){1}, \"{2}\"\}\n", prev, l, r)
"" pairs
My F#/Caml is very rusty so I may have the order of arguments wrong. Also note your string formation is quadratic; in my own code I would go with something more along these lines:
let strings =
List.fold2 (fun ss l r ->
String.format ("\{(ushort){0}, \"{1}\"\}\n", l, r) :: ss)
[] indexes values
let result = String.concat ", " strings
This won't cost you quadratic time and it's a little easier to follow. I've checked MSDN and believe I have the correct order of arguments on fold2.
Keep in mind I know Caml not F# and so I may have details or order of arguments wrong.
Perhaps this:
let strBuilder = new StringBuilder()
for (i,v) in Seq.zip indexes values do
strBuilder.Append(String.Format("{{(ushort){0}, \"{1}\"}},\n", i,v))
|> ignore
with F# sometimes is better go imperative...
map2 or fold2 is the right way to go. Here's my take, using the (||>) operator:
let l1 = [| "a"; "b"; "c"; "d"; "e" |]
let l2 = [| "1"; "2"; "3"; "4"; "5" |]
let pairs = (l1, l2) ||> Seq.map2 (sprintf ("(ushort)%s, \"%s\""))
|> String.concat "\n"

Handy F# snippets [closed]

As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
There are already two questions about F#/functional snippets.
However what I'm looking for here are useful snippets, little 'helper' functions that are reusable. Or obscure but nifty patterns that you can never quite remember.
Something like:
open System.IO
let rec visitor dir filter=
seq { yield! Directory.GetFiles(dir, filter)
for subdir in Directory.GetDirectories(dir) do
yield! visitor subdir filter}
I'd like to make this a kind of handy reference page. As such there will be no right answer, but hopefully lots of good ones.
EDIT Tomas Petricek has created a site specifically for F# snippets http://fssnip.net/.
Perl style regex matching
let (=~) input pattern =
System.Text.RegularExpressions.Regex.IsMatch(input, pattern)
It lets you match text using let test = "monkey" =~ "monk.+" notation.
Infix Operator
I got this from http://sandersn.com/blog//index.php/2009/10/22/infix-function-trick-for-f go to that page for more details.
If you know Haskell, you might find yourself missing infix sugar in F#:
// standard Haskell call has function first, then args just like F#. So obviously
// here there is a function that takes two strings: string -> string -> string
startsWith "kevin" "k"
//Haskell infix operator via backQuotes. Sometimes makes a function read better.
"kevin" `startsWith` "K"
While F# doesn't have a true 'infix' operator, the same thing can be accomplished almost as elegantly via a pipeline and a 'backpipeline' (who knew of such a thing??)
// F# 'infix' trick via pipelines
"kevin" |> startsWith <| "K"
Multi-Line Strings
This is pretty trivial, but it seems to be a feature of F# strings that is not widely known.
let sql = "select a,b,c \
from table \
where a = 1"
This produces:
val sql : string = "select a,b,c from table where a = 1"
When the F# compiler sees a back-slash followed by a carriage return inside a string literal, it will remove everything from the back-slash to the first non-space character on the next line. This allows you to have multi-line string literals that line up, without using a bunch of string concatenation.
Generic memoization, courtesy of the man himself
let memoize f =
let cache = System.Collections.Generic.Dictionary<_,_>(HashIdentity.Structural)
fun x ->
let ok, res = cache.TryGetValue(x)
if ok then res
else let res = f x
cache.[x] <- res
res
Using this, you could do a cached reader like so:
let cachedReader = memoize reader
Simple read-write to text files
These are trivial, but make file access pipeable:
open System.IO
let fileread f = File.ReadAllText(f)
let filewrite f s = File.WriteAllText(f, s)
let filereadlines f = File.ReadAllLines(f)
let filewritelines f ar = File.WriteAllLines(f, ar)
So
let replace f (r:string) (s:string) = s.Replace(f, r)
"C:\\Test.txt" |>
fileread |>
replace "teh" "the" |>
filewrite "C:\\Test.txt"
And combining that with the visitor quoted in the question:
let filereplace find repl path =
path |> fileread |> replace find repl |> filewrite path
let recurseReplace root filter find repl =
visitor root filter |> Seq.iter (filereplace find repl)
Update Slight improvement if you want to be able to read 'locked' files (e.g. csv files which are already open in Excel...):
let safereadall f =
use fs = new FileStream(f, FileMode.Open, FileAccess.Read, FileShare.ReadWrite)
use sr = new StreamReader(fs, System.Text.Encoding.Default)
sr.ReadToEnd()
let split sep (s:string) = System.Text.RegularExpressions.Regex.Split(s, sep)
let fileread f = safereadall f
let filereadlines f = f |> safereadall |> split System.Environment.NewLine
For performance intensive stuff where you need to check for null
let inline isNull o = System.Object.ReferenceEquals(o, null)
if isNull o then ... else ...
Is about 20x faster then
if o = null then ... else ...
Active Patterns, aka "Banana Splits", are a very handy construct that let one match against multiple regular expression patterns. This is much like AWK, but without the high performance of DFA's because the patterns are matched in sequence until one succeeds.
#light
open System
open System.Text.RegularExpressions
let (|Test|_|) pat s =
if (new Regex(pat)).IsMatch(s)
then Some()
else None
let (|Match|_|) pat s =
let opt = RegexOptions.None
let re = new Regex(pat,opt)
let m = re.Match(s)
if m.Success
then Some(m.Groups)
else None
Some examples of use:
let HasIndefiniteArticle = function
| Test "(?: |^)(a|an)(?: |$)" _ -> true
| _ -> false
type Ast =
| IntVal of string * int
| StringVal of string * string
| LineNo of int
| Goto of int
let Parse = function
| Match "^LET\s+([A-Z])\s*=\s*(\d+)$" g ->
IntVal( g.[1].Value, Int32.Parse(g.[2].Value) )
| Match "^LET\s+([A-Z]\$)\s*=\s*(.*)$" g ->
StringVal( g.[1].Value, g.[2].Value )
| Match "^(\d+)\s*:$" g ->
LineNo( Int32.Parse(g.[1].Value) )
| Match "^GOTO \s*(\d+)$" g ->
Goto( Int32.Parse(g.[1].Value) )
| s -> failwithf "Unexpected statement: %s" s
Maybe monad
type maybeBuilder() =
member this.Bind(v, f) =
match v with
| None -> None
| Some(x) -> f x
member this.Delay(f) = f()
member this.Return(v) = Some v
let maybe = maybeBuilder()
Here's a brief intro to monads for the uninitiated.
Option-coalescing operators
I wanted a version of the defaultArg function that had a syntax closer to the C# null-coalescing operator, ??. This lets me get the value from an Option while providing a default value, using a very concise syntax.
/// Option-coalescing operator - this is like the C# ?? operator, but works with
/// the Option type.
/// Warning: Unlike the C# ?? operator, the second parameter will always be
/// evaluated.
/// Example: let foo = someOption |? default
let inline (|?) value defaultValue =
defaultArg value defaultValue
/// Option-coalescing operator with delayed evaluation. The other version of
/// this operator always evaluates the default value expression. If you only
/// want to create the default value when needed, use this operator and pass
/// in a function that creates the default.
/// Example: let foo = someOption |?! (fun () -> new Default())
let inline (|?!) value f =
match value with Some x -> x | None -> f()
'Unitize' a function which doesn't handle units
Using the FloatWithMeasure function http://msdn.microsoft.com/en-us/library/ee806527(VS.100).aspx.
let unitize (f:float -> float) (v:float<'u>) =
LanguagePrimitives.FloatWithMeasure<'u> (f (float v))
Example:
[<Measure>] type m
[<Measure>] type kg
let unitize (f:float -> float) (v:float<'u>) =
LanguagePrimitives.FloatWithMeasure<'u> (f (float v))
//this function doesn't take units
let badinc a = a + 1.
//this one does!
let goodinc v = unitize badinc v
goodinc 3.<m>
goodinc 3.<kg>
OLD version:
let unitize (f:float -> float) (v:float<'u>) =
let unit = box 1. :?> float<'u>
unit * (f (v/unit))
Kudos to kvb
Scale/Ratio function builder
Again, trivial, but handy.
//returns a function which will convert from a1-a2 range to b1-b2 range
let scale (a1:float<'u>, a2:float<'u>) (b1:float<'v>,b2:float<'v>) =
let m = (b2 - b1)/(a2 - a1) //gradient of line (evaluated once only..)
(fun a -> b1 + m * (a - a1))
Example:
[<Measure>] type m
[<Measure>] type px
let screenSize = (0.<px>, 300.<px>)
let displayRange = (100.<m>, 200.<m>)
let scaleToScreen = scale displayRange screenSize
scaleToScreen 120.<m> //-> 60.<px>
Transposing a list (seen on Jomo Fisher's blog)
///Given list of 'rows', returns list of 'columns'
let rec transpose lst =
match lst with
| (_::_)::_ -> List.map List.head lst :: transpose (List.map List.tail lst)
| _ -> []
transpose [[1;2;3];[4;5;6];[7;8;9]] // returns [[1;4;7];[2;5;8];[3;6;9]]
And here is a tail-recursive version which (from my sketchy profiling) is mildly slower, but has the advantage of not throwing a stack overflow when the inner lists are longer than 10000 elements (on my machine):
let transposeTR lst =
let rec inner acc lst =
match lst with
| (_::_)::_ -> inner (List.map List.head lst :: acc) (List.map List.tail lst)
| _ -> List.rev acc
inner [] lst
If I was clever, I'd try and parallelise it with async...
F# Map <-> C# Dictionary
(I know, I know, System.Collections.Generic.Dictionary isn't really a 'C#' dictionary)
C# to F#
(dic :> seq<_>) //cast to seq of KeyValuePair
|> Seq.map (|KeyValue|) //convert KeyValuePairs to tuples
|> Map.ofSeq //convert to Map
(From Brian, here, with improvement proposed by Mauricio in comment below. (|KeyValue|) is an active pattern for matching KeyValuePair - from FSharp.Core - equivalent to (fun kvp -> kvp.Key, kvp.Value))
Interesting alternative
To get all of the immutable goodness, but with the O(1) lookup speed of Dictionary, you can use the dict operator, which returns an immutable IDictionary (see this question).
I currently can't see a way to directly convert a Dictionary using this method, other than
(dic :> seq<_>) //cast to seq of KeyValuePair
|> (fun kvp -> kvp.Key, kvp.Value) //convert KeyValuePairs to tuples
|> dict //convert to immutable IDictionary
F# to C#
let dic = Dictionary()
map |> Map.iter (fun k t -> dic.Add(k, t))
dic
What is weird here is that FSI will report the type as (for example):
val it : Dictionary<string,int> = dict [("a",1);("b",2)]
but if you feed dict [("a",1);("b",2)] back in, FSI reports
IDictionary<string,int> = seq[[a,1] {Key = "a"; Value = 1; } ...
Tree-sort / Flatten a tree into a list
I have the following binary tree:
___ 77 _
/ \
______ 47 __ 99
/ \
21 _ 54
\ / \
43 53 74
/
39
/
32
Which is represented as follows:
type 'a tree =
| Node of 'a tree * 'a * 'a tree
| Nil
let myTree =
Node
(Node
(Node (Nil,21,Node (Node (Node (Nil,32,Nil),39,Nil),43,Nil)),47,
Node (Node (Nil,53,Nil),54,Node (Nil,74,Nil))),77,Node (Nil,99,Nil))
A straightforward method to flatten the tree is:
let rec flatten = function
| Nil -> []
| Node(l, a, r) -> flatten l # a::flatten r
This isn't tail-recursive, and I believe the # operator causes it to be O(n log n) or O(n^2) with unbalanced binary trees. With a little tweaking, I came up with this tail-recursive O(n) version:
let flatten2 t =
let rec loop acc c = function
| Nil -> c acc
| Node(l, a, r) ->
loop acc (fun acc' -> loop (a::acc') c l) r
loop [] (fun x -> x) t
Here's the output in fsi:
> flatten2 myTree;;
val it : int list = [21; 32; 39; 43; 47; 53; 54; 74; 77; 99]
LINQ-to-XML helpers
namespace System.Xml.Linq
// hide warning about op_Explicit
#nowarn "77"
[<AutoOpen>]
module XmlUtils =
/// Converts a string to an XName.
let xn = XName.op_Implicit
/// Converts a string to an XNamespace.
let xmlns = XNamespace.op_Implicit
/// Gets the string value of any XObject subclass that has a Value property.
let inline xstr (x : ^a when ^a :> XObject) =
(^a : (member get_Value : unit -> string) x)
/// Gets a strongly-typed value from any XObject subclass, provided that
/// an explicit conversion to the output type has been defined.
/// (Many explicit conversions are defined on XElement and XAttribute)
/// Example: let value:int = xval foo
let inline xval (x : ^a when ^a :> XObject) : ^b =
((^a or ^b) : (static member op_Explicit : ^a -> ^b) x)
/// Dynamic lookup operator for getting an attribute value from an XElement.
/// Returns a string option, set to None if the attribute was not present.
/// Example: let value = foo?href
/// Example with default: let value = defaultArg foo?Name "<Unknown>"
let (?) (el:XElement) (name:string) =
match el.Attribute(xn name) with
| null -> None
| att -> Some(att.Value)
/// Dynamic operator for setting an attribute on an XElement.
/// Example: foo?href <- "http://www.foo.com/"
let (?<-) (el:XElement) (name:string) (value:obj) =
el.SetAttributeValue(xn name, value)
OK, this has nothing to do with snippets, but I keep forgetting this:
If you are in the interactive window, you hit F7 to jump back to the code window (without deselecting the code which you just ran...)
Going from code window to F# window (and also to open the F# window) is Ctrl Alt F
(unless CodeRush has stolen your bindings...)
Weighted sum of arrays
Calculating a weighted [n-array] sum of a [k-array of n-arrays] of numbers, based on a [k-array] of weights
(Copied from this question, and kvb's answer)
Given these arrays
let weights = [|0.6;0.3;0.1|]
let arrs = [| [|0.0453;0.065345;0.07566;1.562;356.6|] ;
[|0.0873;0.075565;0.07666;1.562222;3.66|] ;
[|0.06753;0.075675;0.04566;1.452;3.4556|] |]
We want a weighted sum (by column), given that both dimensions of the arrays can be variable.
Array.map2 (fun w -> Array.map ((*) w)) weights arrs
|> Array.reduce (Array.map2 (+))
First line: Partial application of the first Array.map2 function to weights yields a new function (Array.map ((*) weight) which is applied (for each weight) to each array in arr.
Second line: Array.reduce is like fold, except it starts on the second value and uses the first as the initial 'state'. In this case each value is a 'line' of our array of arrays. So applying an Array.map2 (+) on the first two lines means that we sum the first two arrays, which leaves us with a new array, which we then (Array.reduce) sum again onto the next (in this case last) array.
Result:
[|0.060123; 0.069444; 0.07296; 1.5510666; 215.40356|]
Performance testing
(Found here and updated for latest release of F#)
open System
open System.Diagnostics
module PerformanceTesting =
let Time func =
let stopwatch = new Stopwatch()
stopwatch.Start()
func()
stopwatch.Stop()
stopwatch.Elapsed.TotalMilliseconds
let GetAverageTime timesToRun func =
Seq.initInfinite (fun _ -> (Time func))
|> Seq.take timesToRun
|> Seq.average
let TimeOperation timesToRun =
GC.Collect()
GetAverageTime timesToRun
let TimeOperations funcsWithName =
let randomizer = new Random(int DateTime.Now.Ticks)
funcsWithName
|> Seq.sortBy (fun _ -> randomizer.Next())
|> Seq.map (fun (name, func) -> name, (TimeOperation 100000 func))
let TimeOperationsAFewTimes funcsWithName =
Seq.initInfinite (fun _ -> (TimeOperations funcsWithName))
|> Seq.take 50
|> Seq.concat
|> Seq.groupBy fst
|> Seq.map (fun (name, individualResults) -> name, (individualResults |> Seq.map snd |> Seq.average))
DataSetExtensions for F#, DataReaders
System.Data.DataSetExtensions.dll adds the ability to treat a DataTable as an IEnumerable<DataRow> as well as unboxing the values of individual cells in a way that gracefully handles DBNull by supporting System.Nullable. For example, in C# we can get the value of an integer column that contains nulls, and specify that DBNull should default to zero with a very concise syntax:
var total = myDataTable.AsEnumerable()
.Select(row => row.Field<int?>("MyColumn") ?? 0)
.Sum();
There are two areas where DataSetExtensions are lacking, however. First, it doesn't support IDataReader and second, it doesn't support the F# option type. The following code does both - it allows an IDataReader to be treated as a seq<IDataRecord>, and it can unbox values from either a reader or a dataset, with support for F# options or System.Nullable. Combined with the option-coalescing operator in another answer, this allows for code such as the following when working with a DataReader:
let total =
myReader.AsSeq
|> Seq.map (fun row -> row.Field<int option>("MyColumn") |? 0)
|> Seq.sum
Perhaps a more idiomatic F# way of ignoring database nulls would be...
let total =
myReader.AsSeq
|> Seq.choose (fun row -> row.Field<int option>("MyColumn"))
|> Seq.sum
Further, the extension methods defined below are usable from both F# and from C#/VB.
open System
open System.Data
open System.Reflection
open System.Runtime.CompilerServices
open Microsoft.FSharp.Collections
/// Ported from System.Data.DatasetExtensions.dll to add support for the Option type.
[<AbstractClass; Sealed>]
type private UnboxT<'a> private () =
// This class generates a converter function based on the desired output type,
// and then re-uses the converter function forever. Because the class itself is generic,
// different output types get different cached converter functions.
static let referenceField (value:obj) =
if value = null || DBNull.Value.Equals(value) then
Unchecked.defaultof<'a>
else
unbox value
static let valueField (value:obj) =
if value = null || DBNull.Value.Equals(value) then
raise <| InvalidCastException("Null cannot be converted to " + typeof<'a>.Name)
else
unbox value
static let makeConverter (target:Type) methodName =
Delegate.CreateDelegate(typeof<Converter<obj,'a>>,
typeof<UnboxT<'a>>
.GetMethod(methodName, BindingFlags.NonPublic ||| BindingFlags.Static)
.MakeGenericMethod([| target.GetGenericArguments().[0] |]))
|> unbox<Converter<obj,'a>>
|> FSharpFunc.FromConverter
static let unboxFn =
let theType = typeof<'a>
if theType.IsGenericType && not theType.IsGenericTypeDefinition then
let genericType = theType.GetGenericTypeDefinition()
if typedefof<Nullable<_>> = genericType then
makeConverter theType "NullableField"
elif typedefof<option<_>> = genericType then
makeConverter theType "OptionField"
else
invalidOp "The only generic types supported are Option<T> and Nullable<T>."
elif theType.IsValueType then
valueField
else
referenceField
static member private NullableField<'b when 'b : struct and 'b :> ValueType and 'b:(new:unit -> 'b)> (value:obj) =
if value = null || DBNull.Value.Equals(value) then
Nullable<_>()
else
Nullable<_>(unbox<'b> value)
static member private OptionField<'b> (value:obj) =
if value = null || DBNull.Value.Equals(value) then
None
else
Some(unbox<'b> value)
static member inline Unbox =
unboxFn
/// F# data-related extension methods.
[<AutoOpen>]
module FsDataEx =
type System.Data.IDataReader with
/// Exposes a reader's current result set as seq<IDataRecord>.
/// Reader is closed when sequence is fully enumerated.
member this.AsSeq =
seq { use reader = this
while reader.Read() do yield reader :> IDataRecord }
/// Exposes all result sets in a reader as seq<seq<IDataRecord>>.
/// Reader is closed when sequence is fully enumerated.
member this.AsMultiSeq =
let rowSeq (reader:IDataReader) =
seq { while reader.Read() do yield reader :> IDataRecord }
seq {
use reader = this
yield rowSeq reader
while reader.NextResult() do
yield rowSeq reader
}
/// Populates a new DataSet with the contents of the reader. Closes the reader after completion.
member this.ToDataSet () =
use reader = this
let dataSet = new DataSet(RemotingFormat=SerializationFormat.Binary, EnforceConstraints=false)
dataSet.Load(reader, LoadOption.OverwriteChanges, [| "" |])
dataSet
type System.Data.IDataRecord with
/// Gets a value from the record by name.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
member this.Field<'a> (fieldName:string) =
this.[fieldName] |> UnboxT<'a>.Unbox
/// Gets a value from the record by column index.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
member this.Field<'a> (ordinal:int) =
this.GetValue(ordinal) |> UnboxT<'a>.Unbox
type System.Data.DataRow with
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnName:string) =
this.[columnName] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnIndex:int) =
this.[columnIndex] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (column:DataColumn) =
this.[column] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnName:string, version:DataRowVersion) =
this.[columnName, version] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (columnIndex:int, version:DataRowVersion) =
this.[columnIndex, version] |> UnboxT<'a>.Unbox
/// Identical to the Field method from DatasetExtensions, but supports the F# Option type.
member this.Field2<'a> (column:DataColumn, version:DataRowVersion) =
this.[column, version] |> UnboxT<'a>.Unbox
/// C# data-related extension methods.
[<Extension; AbstractClass; Sealed>]
type CsDataEx private () =
/// Populates a new DataSet with the contents of the reader. Closes the reader after completion.
[<Extension>]
static member ToDataSet(this:IDataReader) =
this.ToDataSet()
/// Exposes a reader's current result set as IEnumerable{IDataRecord}.
/// Reader is closed when sequence is fully enumerated.
[<Extension>]
static member AsEnumerable(this:IDataReader) =
this.AsSeq
/// Exposes all result sets in a reader as IEnumerable{IEnumerable{IDataRecord}}.
/// Reader is closed when sequence is fully enumerated.
[<Extension>]
static member AsMultipleEnumerable(this:IDataReader) =
this.AsMultiSeq
/// Gets a value from the record by name.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
[<Extension>]
static member Field<'T> (this:IDataRecord, fieldName:string) =
this.Field<'T>(fieldName)
/// Gets a value from the record by column index.
/// DBNull and null are returned as the default value for the type.
/// Supports both nullable and option types.
[<Extension>]
static member Field<'T> (this:IDataRecord, ordinal:int) =
this.Field<'T>(ordinal)
Handling arguments in a command line application:
//We assume that the actual meat is already defined in function
// DoStuff (string -> string -> string -> unit)
let defaultOutOption = "N"
let defaultUsageOption = "Y"
let usage =
"Scans a folder for and outputs results.\n" +
"Usage:\n\t MyApplication.exe FolderPath [IncludeSubfolders (Y/N) : default=" +
defaultUsageOption + "] [OutputToFile (Y/N): default=" + defaultOutOption + "]"
let HandlArgs arr =
match arr with
| [|d;u;o|] -> DoStuff d u o
| [|d;u|] -> DoStuff d u defaultOutOption
| [|d|] -> DoStuff d defaultUsageOption defaultOutOption
| _ ->
printf "%s" usage
Console.ReadLine() |> ignore
[<EntryPoint>]
let main (args : string array) =
args |> HandlArgs
0
(I had a vague memory of this technique being inspired by Robert Pickering, but can't find a reference now)
A handy cache function that keeps up to max (key,reader(key)) in a dictionary and use a SortedList to track the MRU keys
let Cache (reader: 'key -> 'value) max =
let cache = new Dictionary<'key,LinkedListNode<'key * 'value>>()
let keys = new LinkedList<'key * 'value>()
fun (key : 'key) -> (
let found, value = cache.TryGetValue key
match found with
|true ->
keys.Remove value
keys.AddFirst value |> ignore
(snd value.Value)
|false ->
let newValue = key,reader key
let node = keys.AddFirst newValue
cache.[key] <- node
if (keys.Count > max) then
let lastNode = keys.Last
cache.Remove (fst lastNode.Value) |> ignore
keys.RemoveLast() |> ignore
(snd newValue))
Creating XElements
Nothing amazing, but I keep getting caught out by the implicit conversion of XNames:
#r "System.Xml.Linq.dll"
open System.Xml.Linq
//No! ("type string not compatible with XName")
//let el = new XElement("MyElement", "text")
//better
let xn s = XName.op_Implicit s
let el = new XElement(xn "MyElement", "text")
//or even
let xEl s o = new XElement(xn s, o)
let el = xEl "MyElement" "text"
Pairwise and pairs
I always expect Seq.pairwise to give me [(1,2);(3;4)] and not [(1,2);(2,3);(3,4)]. Given that neither exist in List, and that I needed both, here's the code for future reference. I think they're tail recursive.
//converts to 'windowed tuples' ([1;2;3;4;5] -> [(1,2);(2,3);(3,4);(4,5)])
let pairwise lst =
let rec loop prev rem acc =
match rem with
| hd::tl -> loop hd tl ((prev,hd)::acc)
| _ -> List.rev acc
loop (List.head lst) (List.tail lst) []
//converts to 'paged tuples' ([1;2;3;4;5;6] -> [(1,2);(3,4);(5,6)])
let pairs lst =
let rec loop rem acc =
match rem with
| l::r::tl -> loop tl ((l,r)::acc)
| l::[] -> failwith "odd-numbered list"
| _ -> List.rev acc
loop lst []
Naive CSV reader (i.e., won't handle anything nasty)
(Using filereadlines and List.transpose from other answers here)
///Given a file path, returns a List of row lists
let ReadCSV =
filereadlines
>> Array.map ( fun line -> line.Split([|',';';'|]) |> List.ofArray )
>> Array.toList
///takes list of col ids and list of rows,
/// returns array of columns (in requested order)
let GetColumns cols rows =
//Create filter
let pick cols (row:list<'a>) = List.map (fun i -> row.[i]) cols
rows
|> transpose //change list of rows to list of columns
|> pick cols //pick out the columns we want
|> Array.ofList //an array output is easier to index for user
Example
"C:\MySampleCSV"
|> ReadCSV
|> List.tail //skip header line
|> GetColumns [0;3;1] //reorder columns as well, if needs be.
Date Range
simple but useful list of dates between fromDate and toDate
let getDateRange fromDate toDate =
let rec dates (fromDate:System.DateTime) (toDate:System.DateTime) =
seq {
if fromDate <= toDate then
yield fromDate
yield! dates (fromDate.AddDays(1.0)) toDate
}
dates fromDate toDate
|> List.ofSeq
toggle code to sql
More trivial than most on this list, but handy nonetheless:
I'm always taking sql in and out of code to move it to a sql environment during development. Example:
let sql = "select a,b,c "
+ "from table "
+ "where a = 1"
needs to be 'stripped' to:
select a,b,c
from table
where a = 1
keeping the formatting. It's a pain to strip out the code symbols for the sql editor, then put them back again by hand when I've got the sql worked out. These two functions toggle the sql back and forth from code to stripped:
// reads the file with the code quoted sql, strips code symbols, dumps to FSI
let stripForSql fileName =
File.ReadAllText(fileName)
|> (fun s -> Regex.Replace(s, "\+(\s*)\"", ""))
|> (fun s -> s.Replace("\"", ""))
|> (fun s -> Regex.Replace(s, ";$", "")) // end of line semicolons
|> (fun s -> Regex.Replace(s, "//.+", "")) // get rid of any comments
|> (fun s -> printfn "%s" s)
then when you are ready to put it back into your code source file:
let prepFromSql fileName =
File.ReadAllText(fileName)
|> (fun s -> Regex.Replace(s, #"\r\n", " \"\r\n+\"")) // matches newline
|> (fun s -> Regex.Replace(s, #"\A", " \""))
|> (fun s -> Regex.Replace(s, #"\z", " \""))
|> (fun s -> printfn "%s" s)
I'd love to get rid of the input file but can't even begin to grok how to make that happen. anyone?
edit:
I figured out how to eliminate the requirement of a file for these functions by adding a windows forms dialog input/output. Too much code to show, but for those who would like to do such a thing, that's how I solved it.
Pascal's Triangle (hey, someone might find it useful)
So we want to create a something like this:
1
1 1
1 2 1
1 3 3 1
1 4 6 4 1
Easy enough:
let rec next = function
| [] -> []
| x::y::xs -> (x + y)::next (y::xs)
| x::xs -> x::next xs
let pascal n =
seq { 1 .. n }
|> List.scan (fun acc _ -> next (0::acc) ) [1]
The next function returns a new list where each item[i] = item[i] + item[i + 1].
Here's the output in fsi:
> pascal 10 |> Seq.iter (printfn "%A");;
[1]
[1; 1]
[1; 2; 1]
[1; 3; 3; 1]
[1; 4; 6; 4; 1]
[1; 5; 10; 10; 5; 1]
[1; 6; 15; 20; 15; 6; 1]
[1; 7; 21; 35; 35; 21; 7; 1]
[1; 8; 28; 56; 70; 56; 28; 8; 1]
[1; 9; 36; 84; 126; 126; 84; 36; 9; 1]
[1; 10; 45; 120; 210; 252; 210; 120; 45; 10; 1]
For the adventurous, here's a tail-recursive version:
let rec next2 cont = function
| [] -> cont []
| x::y::xs -> next2 (fun l -> cont <| (x + y)::l ) <| y::xs
| x::xs -> next2 (fun l -> cont <| x::l ) <| xs
let pascal2 n =
set { 1 .. n }
|> Seq.scan (fun acc _ -> next2 id <| 0::acc)) [1]
Flatten a List
if you have something like this:
let listList = [[1;2;3;];[4;5;6]]
and want to 'flatten' it down to a singe list so the result is like this:
[1;2;3;4;5;6]
it can be done thusly:
let flatten (l: 'a list list) =
seq {
yield List.head (List.head l)
for a in l do yield! (Seq.skip 1 a)
}
|> List.ofSeq
List comprehensions for float
This [23.0 .. 1.0 .. 40.0] was marked as deprecated a few versions backed.
But apparently, this works:
let dl = 9.5 / 11.
let min = 21.5 + dl
let max = 40.5 - dl
let a = [ for z in min .. dl .. max -> z ]
let b = a.Length
(BTW, there's a floating point gotcha in there. Discovered at fssnip - the other place for F# snippets)
Parallel map
let pmap f s =
seq { for a in s -> async { return f s } }
|> Async.Parallel
|> Async.Run

Char value in F#

Lets say I have a string "COLIN".
The numeric value of this string would is worth:
3 + 15 + 12 + 9 + 14 = 53.
So
A = 1, B = 2, C = 3, and so on.
I have no idea how to even start in F# for this.
let mutable nametotal = 0
let rec tcalculate name =
name.ToString().ToCharArray()
|> Seq.length
Here is what I have so far. The seq.length is just there for testing to see if the toCharArray actually worked.
What you have is decent; here's another version:
#light
let Value (c:char) =
(int c) - (int 'A') + 1
let CalcValue name =
name |> Seq.sum_by Value
printfn "COLIN = %d" (CalcValue "COLIN")
// may be of interest:
printfn "%A" ("COLIN" |> Seq.map Value |> Seq.to_list)
It assumes the original input is uppercase. "int" is a function that converts a char (or whatever) to an int; Seq.sum_by is perfect for this.
I also show an example of using map, not sure what you're interested in.
If the 'mapping' is more arbitrary, you could use a strategy like the code below, where you can specify a data structure of what value each letter maps to.
#light
let table = [
'C', 3
'O', 15
'L', 12
'I', 9
'N', 14
]
let dictionary = dict table
let Value c =
match dictionary.TryGetValue(c) with
| true, v -> v
| _ -> failwith (sprintf "letter '%c' was not in lookup table" c)
let CalcValue name =
name |> Seq.sum_by Value
printfn "COLIN = %d" (CalcValue "COLIN")
I've found a hackish way to do this using the ascii value of the character, and getting the number from there but i think there might be a better way.
let tcalculate name =
name.ToString().ToLower().ToCharArray()
|> Seq.map (fun char -> Convert.ToInt32 char - 96)
|> Seq.sum
work's beautifully and maybe even more efficient then "mapping" but I'd like to view the solution I asked for
thanks all.
all you need to do, is make the string lowercase, turn it into a char array like you have done, loop through each letter, take the value of each char and subtract the value of 'a' and add one. that will make each letter have the value of its position in the alphabet.
I realize this is very old but I am recently learning F# and playing with the ideas in this question. Maybe someone will find it useful:
let table =
Seq.zip ['A'..'Z'] (Seq.initInfinite((+) 1))
|> Map.ofSeq
let calc (input : string) =
let s = input.ToUpper()
match s with
| _ when Seq.forall System.Char.IsLetter s ->
Some (Seq.sumBy (fun c -> table.[c]) s)
| _ -> None
let sumOfChar name = // F# functional answer
name
|> List.ofSeq // to char array
|> List.map (fun c -> int (System.Char.ToUpper c) - int 'A' + 1) // to value
|> List.fold (+) 0 // sum
sumOfChar "Herb" // 33
// Or simply this version:
let sumOfCharBy name =
let value c = int (System.Char.ToUpper c) - int 'A' + 1
List.sumBy value (List.ofSeq name)
sumOfCharBy "HerbM" // 46
// or simply:
let sumOfCharBy name =
name |> Seq.sumBy (fun c -> int (System.Char.ToUpper c) - int 'A' + 1)
sumOfCharBy "HMartin" // 83

Resources