I have just installed docker and I was following the getting started guide but there seems to be some error and I can not figure out what it is I am very new to this and I don't know what to do
I have attached the image of the error and docker desktop for your reference.
C:\Users\HP>docker run hello-world
docker: error during connect: This error may indicate that the docker daemon is not running.: Post "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/containers/create": open //./pipe/docker_engine: The system cannot find the file specified.
See 'docker run --help'.
so, it turns out that wsl2 was to be updated
I have posted the link a youtube tutorial which helped.
https://youtu.be/IMZY0nUYhcg
Related
What is the windows equivalent of this code?
sudo docker pull ghcr.io/theislab/extended-single-cell-best-practices-container:latest
Link to docker
I have tried running this command already in windows cmd:
docker run ghcr.io/theislab/extended-single-cell-best-practices-container:latest
I can not reproduce your problem,
docker run ghcr.io/theislab/extended-single-cell-best-practices-container:latest
works fine for me. Without the error messages debugging will be impossible. I can just give some Assumptions.
Do you have docker desktop installed? if not -> Docker Desktop
Is the docker daemon running? to find out, try docker ps in the powershell. When the Answer to this is error during connect: This error may indicate that the docker daemon is not running.: Get "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/containers/json": open //./pipe/docker_engine: The system cannot find the file specified., your daemon is probably not running -> Start docker desktop. The file to do so should be in a directory like this : C:\Program Files\Docker\Docker\Docker Desktop.exe
For further debugging I would need more information on the error Message. This kind of message would have been better as a comment, but I'm not allowed to write some because of my low reputation, sorry for that
System info:
Windows 10 pro 64 bit
C:\WINDOWS\system32>docker --version
Docker version 18.06.1-ce, build e68fc7a
C:\WINDOWS\system32>docker info
error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
C:\WINDOWS\system32>docker pull hello-world
Using default tag: latest
Warning: failed to get default registry endpoint from daemon (error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.). Using system default: https://index.docker.io/v1/
error during connect: Post http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/images/create?fromImage=hello-world&tag=latest: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
You can powerShell as admin.
Run this code:
cd "C:\Program Files\Docker\Docker"
./DockerCli.exe -SwitchDaemon
Running Powershell with elevated access solved my issue.
Usually this error means the Docker daemon that is docker services is not up and running.
Make sure docker is running by issuing below command in power shell in elevated mode.
docker run hello-world
A response as hello from docker will be printed on console.
Else start the docker by double clicking the docker app from start menu.
Below is the snapshot of graphically up and running docker daemon.
On Windows, go to the folder %homepath%\.docker, open daemon.json and if debug is set to true then set it to false.
I had the same error as in the question and after I changed the above it worked again for me. After I got the error, I had been looking at the various docker settings and decided to set debug to false because I don't need any daemon debug info for what I'm doing. I don't know why it was set to true originally.
In my case, although I had the docker service running as admin and the service was shown as running, it was not.
Open the docker desktop app, click on the 'troubleshoot' icon. Check if the service is effectively running (bottom left). If it's not, try to 'clean/purge data', and then restart the service. It worked for me!
Verify it by running docker run hello-world
Fow Windows:
Launch command: "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchDaemon
This error is because of organisation network certificates which are installed in local machine. Beacuse some companies restricted network by installing certificates.
docker daemon service is not running on my machine and when I start the service, this error us resolved.
I had faced the same error, the following worked for me:
In the windows taskbar, the docker icon was red in color saying Out of Memory...
In the Docker Desktop App, goto
Settings -> Resources -> Disk Image Size -> decrease the space allocated -> Apply & Restart
This did happen to me while i was using docker today for the first time. I fixed by opening up the docker app in the PC and signing and selecting the necessary subscription plan.
Open docker with docker <homepath>. Simply upgrade docker and then run this command
docker-compose up -d
you will be able to solve the specified path error.
docker.errors.DockerException: Error while fetching server API version: (2, 'CreateFile', 'The system cannot find the file specified.')
[14620] Failed to execute script docker-compose
Doing the above solved the error.
Yo,
open docker app > settings > Docker engine > "debug": true,
debug was false initially, after changing it to "true" it worked.
Thanks.
I'm new to using Docker (never used it before) and I'm running into these errors:
I installed the Docker for Windows and following the steps on this
tutorial, but Docker Desktop doesn't load up for me at all.
I tried to run the docker pull hello-world command but I'm getting the error: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
How do I fix this? Thanks
System info:
Windows 10 pro 64 bit
C:\WINDOWS\system32>docker --version
Docker version 18.06.1-ce, build e68fc7a
C:\WINDOWS\system32>docker info
error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
C:\WINDOWS\system32>docker pull hello-world
Using default tag: latest
Warning: failed to get default registry endpoint from daemon (error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.). Using system default: https://index.docker.io/v1/
error during connect: Post http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/images/create?fromImage=hello-world&tag=latest: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
You can powerShell as admin.
Run this code:
cd "C:\Program Files\Docker\Docker"
./DockerCli.exe -SwitchDaemon
Running Powershell with elevated access solved my issue.
Usually this error means the Docker daemon that is docker services is not up and running.
Make sure docker is running by issuing below command in power shell in elevated mode.
docker run hello-world
A response as hello from docker will be printed on console.
Else start the docker by double clicking the docker app from start menu.
Below is the snapshot of graphically up and running docker daemon.
On Windows, go to the folder %homepath%\.docker, open daemon.json and if debug is set to true then set it to false.
I had the same error as in the question and after I changed the above it worked again for me. After I got the error, I had been looking at the various docker settings and decided to set debug to false because I don't need any daemon debug info for what I'm doing. I don't know why it was set to true originally.
In my case, although I had the docker service running as admin and the service was shown as running, it was not.
Open the docker desktop app, click on the 'troubleshoot' icon. Check if the service is effectively running (bottom left). If it's not, try to 'clean/purge data', and then restart the service. It worked for me!
Verify it by running docker run hello-world
Fow Windows:
Launch command: "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchDaemon
This error is because of organisation network certificates which are installed in local machine. Beacuse some companies restricted network by installing certificates.
docker daemon service is not running on my machine and when I start the service, this error us resolved.
I had faced the same error, the following worked for me:
In the windows taskbar, the docker icon was red in color saying Out of Memory...
In the Docker Desktop App, goto
Settings -> Resources -> Disk Image Size -> decrease the space allocated -> Apply & Restart
This did happen to me while i was using docker today for the first time. I fixed by opening up the docker app in the PC and signing and selecting the necessary subscription plan.
Open docker with docker <homepath>. Simply upgrade docker and then run this command
docker-compose up -d
you will be able to solve the specified path error.
docker.errors.DockerException: Error while fetching server API version: (2, 'CreateFile', 'The system cannot find the file specified.')
[14620] Failed to execute script docker-compose
Doing the above solved the error.
Yo,
open docker app > settings > Docker engine > "debug": true,
debug was false initially, after changing it to "true" it worked.
Thanks.
I am new to DOCKER. I am using Community Edition, stable version on Windows 10 64bit OS.
Docker is installed successfully and it is showing status as running. However when i try below command i get error :
C:\Program Files\Docker\Docker>docker run hello-world
docker: error during connect: Post http://C:2375/Program%20Files/Docker/Docker/v1.27/containers/create: dial tcp: lookup C: getaddrinfow: No such host is known..
See 'docker run --help'.
Docker version is
C:\Program Files\Docker\Docker>docker --version
Docker version 17.03.1-ce, build c6d412e
can anyone please help?
I recommend you to go for docker tool box if it is for development purpose. I too faced few issues when i was trying to install docker on my Windows 10.
Before go for further investigation about your problem, i want you to check the following;
Make sure Virtualization enabled. you can check it in BIOS configuration.
In final completion wizard of docker window, you must check "Launch Docker" (it will check by default)
If you think you installed properly, you should able to see the docker icon in the status bar.
If all the above criteria's seems fine, you can run the hello-world program and could able to see the output from docker hub.
For more information on how to install docker tool box on you windows. you can refer the docker tool box for windows
If you still have any issues, please type the below command on your terminal and send the result
"docker info"
Hope this will help for you!