What is the windows equivalent of this code?
sudo docker pull ghcr.io/theislab/extended-single-cell-best-practices-container:latest
Link to docker
I have tried running this command already in windows cmd:
docker run ghcr.io/theislab/extended-single-cell-best-practices-container:latest
I can not reproduce your problem,
docker run ghcr.io/theislab/extended-single-cell-best-practices-container:latest
works fine for me. Without the error messages debugging will be impossible. I can just give some Assumptions.
Do you have docker desktop installed? if not -> Docker Desktop
Is the docker daemon running? to find out, try docker ps in the powershell. When the Answer to this is error during connect: This error may indicate that the docker daemon is not running.: Get "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/containers/json": open //./pipe/docker_engine: The system cannot find the file specified., your daemon is probably not running -> Start docker desktop. The file to do so should be in a directory like this : C:\Program Files\Docker\Docker\Docker Desktop.exe
For further debugging I would need more information on the error Message. This kind of message would have been better as a comment, but I'm not allowed to write some because of my low reputation, sorry for that
Related
I have just installed docker and I was following the getting started guide but there seems to be some error and I can not figure out what it is I am very new to this and I don't know what to do
I have attached the image of the error and docker desktop for your reference.
C:\Users\HP>docker run hello-world
docker: error during connect: This error may indicate that the docker daemon is not running.: Post "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/containers/create": open //./pipe/docker_engine: The system cannot find the file specified.
See 'docker run --help'.
so, it turns out that wsl2 was to be updated
I have posted the link a youtube tutorial which helped.
https://youtu.be/IMZY0nUYhcg
I am new to Docker and after writing docker version in cmd I got this error,
error during connect: This error may indicate that the docker daemon is not running.: Get "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/version": open //./pipe/docker_engine: The system cannot find the file specified.
The following steps solved this problem:
Open cmd as administrator
Launch command: "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchDaemon
some times docker might be disabled from starting on boot or login so in the windows search bar or when clicking the WinKey and starting to type Dock... like showen in the picture below, Then press Enter to start the Docker Daemon
Try running dockerd in a separate terminal and then try running this command.
To avoid doing this every time you can go to services -> find Docker -> select Startup Type as Automatic (Delayed) and reboot the machine.
Simple Solution: Just open Powershell and type dockerd which will start the daemon and you shall be able to use the docker now without errors.
On Windows, reason behind this issue is that Docker is not started. I tried couple of solution provided on multiple online portal to start it. What worked for me is:
In Docker Desktop if you are already logged in as a user, logout from there
Again login to docker desktop with docker account
When we login to docker account, it internally triggers the restart. So resulting if it's not started, it will start the docker for us.
I had this, but when I used a command shell elevated to Administrator, docker version was fine.
This error may indicate that the docker daemon is not running.: Get "http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.24/containers/json": open //./pipe/docker_engine: The system cannot find the file specified.
this error in windows 10
step 1
pls install (https://learn.microsoft.com/en-us/windows/wsl/install-manual#step-4---download-the-linux-kernel-update-package) Download the latest package:
this link WSL2 Linux kernel update package for x64 machines
then restart then automatically running
In my case,
I download the this github repo.MaxySpark
Closed all the application related to docker.
1.Click on docker.reg file in the downloaded repo.
2.Click on yes->yes->ok to merge.
3.Again open the Docker Toolbox and run docker run hello-world
Open cmd as administrator
Launch command: C:\Program Files\Docker\Docker\DockerCli.exe -SwitchDaemon
It simply means that your docker application is not running or you have not logged in to docker application, or docker desktop service is not running .
1: Just open Docker desktop application, login with docker credentials.
2: if already logged in and still getting this error, go to windows + r ==> and type 'services.msc', and restart the docker desktop service.
All done.
It can be kernel problem:
You need to update WSL2 Linux kernel update package for x64 machines
Follow this tutorial:
https://linuxhint.com/resolve-docker-daemon-not-running/
and before execute "docker run hello-world" command, dont forget restart docker
https://learn.microsoft.com/en-us/windows/wsl/install-manual
System info:
Windows 10 pro 64 bit
C:\WINDOWS\system32>docker --version
Docker version 18.06.1-ce, build e68fc7a
C:\WINDOWS\system32>docker info
error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
C:\WINDOWS\system32>docker pull hello-world
Using default tag: latest
Warning: failed to get default registry endpoint from daemon (error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.). Using system default: https://index.docker.io/v1/
error during connect: Post http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/images/create?fromImage=hello-world&tag=latest: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
You can powerShell as admin.
Run this code:
cd "C:\Program Files\Docker\Docker"
./DockerCli.exe -SwitchDaemon
Running Powershell with elevated access solved my issue.
Usually this error means the Docker daemon that is docker services is not up and running.
Make sure docker is running by issuing below command in power shell in elevated mode.
docker run hello-world
A response as hello from docker will be printed on console.
Else start the docker by double clicking the docker app from start menu.
Below is the snapshot of graphically up and running docker daemon.
On Windows, go to the folder %homepath%\.docker, open daemon.json and if debug is set to true then set it to false.
I had the same error as in the question and after I changed the above it worked again for me. After I got the error, I had been looking at the various docker settings and decided to set debug to false because I don't need any daemon debug info for what I'm doing. I don't know why it was set to true originally.
In my case, although I had the docker service running as admin and the service was shown as running, it was not.
Open the docker desktop app, click on the 'troubleshoot' icon. Check if the service is effectively running (bottom left). If it's not, try to 'clean/purge data', and then restart the service. It worked for me!
Verify it by running docker run hello-world
Fow Windows:
Launch command: "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchDaemon
This error is because of organisation network certificates which are installed in local machine. Beacuse some companies restricted network by installing certificates.
docker daemon service is not running on my machine and when I start the service, this error us resolved.
I had faced the same error, the following worked for me:
In the windows taskbar, the docker icon was red in color saying Out of Memory...
In the Docker Desktop App, goto
Settings -> Resources -> Disk Image Size -> decrease the space allocated -> Apply & Restart
This did happen to me while i was using docker today for the first time. I fixed by opening up the docker app in the PC and signing and selecting the necessary subscription plan.
Open docker with docker <homepath>. Simply upgrade docker and then run this command
docker-compose up -d
you will be able to solve the specified path error.
docker.errors.DockerException: Error while fetching server API version: (2, 'CreateFile', 'The system cannot find the file specified.')
[14620] Failed to execute script docker-compose
Doing the above solved the error.
Yo,
open docker app > settings > Docker engine > "debug": true,
debug was false initially, after changing it to "true" it worked.
Thanks.
I'm new to using Docker (never used it before) and I'm running into these errors:
I installed the Docker for Windows and following the steps on this
tutorial, but Docker Desktop doesn't load up for me at all.
I tried to run the docker pull hello-world command but I'm getting the error: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
How do I fix this? Thanks
System info:
Windows 10 pro 64 bit
C:\WINDOWS\system32>docker --version
Docker version 18.06.1-ce, build e68fc7a
C:\WINDOWS\system32>docker info
error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
C:\WINDOWS\system32>docker pull hello-world
Using default tag: latest
Warning: failed to get default registry endpoint from daemon (error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/info: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.). Using system default: https://index.docker.io/v1/
error during connect: Post http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.38/images/create?fromImage=hello-world&tag=latest: open //./pipe/docker_engine: The system cannot find the file specified. In the default daemon configuration on Windows, the docker client must be run elevated to connect. This error may also indicate that the docker daemon is not running.
You can powerShell as admin.
Run this code:
cd "C:\Program Files\Docker\Docker"
./DockerCli.exe -SwitchDaemon
Running Powershell with elevated access solved my issue.
Usually this error means the Docker daemon that is docker services is not up and running.
Make sure docker is running by issuing below command in power shell in elevated mode.
docker run hello-world
A response as hello from docker will be printed on console.
Else start the docker by double clicking the docker app from start menu.
Below is the snapshot of graphically up and running docker daemon.
On Windows, go to the folder %homepath%\.docker, open daemon.json and if debug is set to true then set it to false.
I had the same error as in the question and after I changed the above it worked again for me. After I got the error, I had been looking at the various docker settings and decided to set debug to false because I don't need any daemon debug info for what I'm doing. I don't know why it was set to true originally.
In my case, although I had the docker service running as admin and the service was shown as running, it was not.
Open the docker desktop app, click on the 'troubleshoot' icon. Check if the service is effectively running (bottom left). If it's not, try to 'clean/purge data', and then restart the service. It worked for me!
Verify it by running docker run hello-world
Fow Windows:
Launch command: "C:\Program Files\Docker\Docker\DockerCli.exe" -SwitchDaemon
This error is because of organisation network certificates which are installed in local machine. Beacuse some companies restricted network by installing certificates.
docker daemon service is not running on my machine and when I start the service, this error us resolved.
I had faced the same error, the following worked for me:
In the windows taskbar, the docker icon was red in color saying Out of Memory...
In the Docker Desktop App, goto
Settings -> Resources -> Disk Image Size -> decrease the space allocated -> Apply & Restart
This did happen to me while i was using docker today for the first time. I fixed by opening up the docker app in the PC and signing and selecting the necessary subscription plan.
Open docker with docker <homepath>. Simply upgrade docker and then run this command
docker-compose up -d
you will be able to solve the specified path error.
docker.errors.DockerException: Error while fetching server API version: (2, 'CreateFile', 'The system cannot find the file specified.')
[14620] Failed to execute script docker-compose
Doing the above solved the error.
Yo,
open docker app > settings > Docker engine > "debug": true,
debug was false initially, after changing it to "true" it worked.
Thanks.