For years I've been running a Docker container on my local machine and using it as a remote Python interpreter via SSH in PyCharm. This works great (though 2022.2.1 brought a lot of new bugs that have been slowly being ironed out) for running my code! I'm now on 2022.2.3.
However, I'm having issues running unit tests. In the past (i.e. before version 2022.2.1), I could simply right click my tests directory (a direct child of my main project directory) and click Run Python tests in test... and it would all work as expected.
Now, though, when I click this, I receive an error message about "No such file or directory."
I've tried everything I can think of- I've setup my path mappings in the Python test run config to exactly match those shown in my Python run config, and have tried every version of directory and subdirectory in the mappings and working directory, but I always receive an error about either having an empty test suite (no tests found), or that the directory "must be in the project."
It seems like no matter what I do, PyCharm is trying to create a temp directory somewhere, or is trying to read from some temp directory that I never specified, because I see errors this like:
AssertionError: /tmp/pycharm_project_405/docker/tests: No such file or directory
Yet I never created, specified, or requested a temp directory of any sort, let alone one named /tmp/pycharm_project_405/; this is a mystery to me.
PyCharm with an SSH interpreter is rapidly becoming unusable for me and my team because we cannot figure out how to set this up. Can anybody please offer some guidance on what we need to do?
Thank you all so very much!
I tried:
Changing run config for Python tests to match the working directory and path mapping of Python run configs (which work)
Directly specifying the path to the tests from the container's perspective
Setting up run config templates
Specifying one directory up/down from the actual tests
Expected:
Unit tests to be found and run as they were in previous versions of PyCharm
Answer
Create a run config for testing
In the testing run config, set Target: to Custom
Set the correct remote interpreter
Set Working directory to the test folder
Set TWO path mappings: 1) Map the code directory (in my case, the parent directory of the tests folder) and 2) Map the test directory itself
Voila!!!
Related
recently i have been trying to run a script in lua that through os.execute() will execute a script in C# compiled into an executablethat is in the same directory as my script.
In my first attempt adding the entire directory until the executable worked:
os.execute("C:\\ServerTest\\test\\tex\\testcode.exe")
however I need this script to work on other computers, which means I can't add the entirely path to the file.I tried countless methods to execute the .exe file inside the same directory without using the entire path and none of the methods worked
os.execute("./testcode")
os.execute [[".\testcode.exe"]]
os.execute(".\\testcode.exe")
os.execute "testcode.exe"
I even tried to create an environment variable and run the entire directory from it xD
os.execute("set wTest=%cd%")
os.execute("%wTest%\\testcode.exe")
but nothing worked. I also tried to use io.popen() but didn't get results either (because the executable will close a computer process, it does not give any output :V)
does anyone know how I can do this?????
I have just created a .env file to separate my environment variables from my main docker-compose file. I can run this document on my local machine fine with no errors or issues but when I try run it through my CD pipeline I get the following error.
[error]Top level object in 'C:\BuildAgent_work\r38\a\"Myproject Name"\drop\ .env' needs to be an object not 'class 'str'.
I first thought this was because I had set up my build/CI process wrong but I have played around with it and have had no luck.
I have also done some research online to find others with the same problem but none relate to DevOps in anyway so it has been unhelpful
I am not sure how to reproduce this problem but if anyone knows I can try provide some of my code if needed
Edit:
Here is a snippet of my .env file. Check comment below for my thoughts
ContainerInfrastructure_Version=6.7.93-beta.1
ContainerInfrastructureCore_Version=6.7.41-beta.1
AuthenticationWebService_Version=6.7.52-beta.1
CRM_Version=6.7.52-beta.1
Expected result:
Deploys successfully
What I'm getting during the docker-compose task:
[error]Top level object in 'C:\BuildAgent_work\r38\a\Goldpine.ReleaseManagement\drop.env' needs to be an object not 'class 'str'.
Ok so I figured it out. I'm not sure how to explain this briefly but I'll do my best.
So the problem was within DevOps itself not my code. It turns out a .env file only works/gets picked up if you run the docker-compose command from within the working directory that the docker-compose.yml file exists.
When it went into DevOps it was not running the command from within the downloaded artefact directory but by creating a path to it using the -f command.
So long story short, If you use a .env file you need to set the working directory within the CD pipeline to your artefact folder for it to be able to see the .env file correctlly.
I hope this is clear enough if not just let me know and I'll try change it accordingly :)
My question is, how should my Erlang app reliably find a binary in the priv directory, not just in production; when installed properly, but during common test?
I realised today when I added a travis-ci configuration to an old Erlang app and pushed it to git-hub, that the process by which it works locally for me, is a little more fragile than I thought. The travis-ci build failed because it, not unreasonably, checked out my repo into a directory named after the repo, which is of the form erlang-APP. Locally my app is in a directory called APP-VSN though.
The result of this is that a call to code:lib_dir(APP) returns a correct result during the common test run locally, but if I rename my current directory to erlang-APP instead of APP-VSN (or just APP works too) my local build fails, just like it does for travis-ci, because code:lib_dir(APP) returns {error,bad_name}. The behaviour as though .. is added to the library path for rebar ct.
Renaming my github repo from erlang-APP to APP resolves the travis-ci build failure... but knowing the build tests only pass depending on the name of the directory the repo is checked out into doesn't sit right with me.
One way could be to use a soft link (either in the repo under version control, or created when initializing the tests), and make your Erlang code path go via the link. E.g., "./APP" -> ".", or "./lib/APP" -> "..".
I have a project which for its tests runs:
./node_modules/.bin/mocha tests/**/*.coffee -r coffee-script/register -c
tests/ looks like this:
_helper.coffee
database-tests.coffee
routers/
index-router-tests.coffee
team-router-tests.coffee
On my windows dev machine it works fine running _helper.coffee first and then the rest of the files.
On my CI server running debian it only tries to run routers/* missing out anything in the root folder.
I am assuming that tests/**/*.coffee isnt right for unix?
Moving Comments to an Answer for others since it appears to have fixed your problem.
I have had the same problems on Windows where it is not returning the files in the same order that you see them listed on the drive. I have therefore used tests/*.coffee and then tests/**/*.coffee.
I found that Windows will retrieve the files in the order they were likely written to the hard drive, while a directory or other list will have them sorted for display. This seemed to be the problem I was encountering.
The parent directory ('tests') does not seem to be included when using tests/** which seams to mean directories under the tests folder, and does not include the tests folder itself.
I'm running a multi-program projects using ACE TAO. I set the Environment Variables and compiled ACE_TAO environment. Then I copied the tao_cosnaming.exe to my project run directory and use a .bat to start the naming service.
The programs run well if I start them directly, but they could not get the "NameService" correctly when I invoke obj = orb->resolve_initial_references("NameService") in debug mode. (I could not run obj->_non_existent(), it throws an error).
It seemed because the Naming Service is implemented as a remote one. When I invoke obj = orb->invoke resolve_initial_references("RootPOA"), things are fine, because RootPOA is local object so obj->_non_existent() return immediately.
The .bat file is like:
cd /D %DTAX_RUN_DIR%
tao_cosnaming -ORBEndPoint iiop://%DTAX_NAME_SERVICE_HOST%
The DTAX_RUN_DIR and DTAX_NAME_SERVICE_HOST are Environment Variables. DTAX_RUN_DIR is project run directory and DTAX_NAME_SERVICE_HOST=169.254.51.81:10493
Could anybody share some ideas on what is going wrong? Thanks!
It's hard to give a definite solution with just the information you provided, but in my projects I need to pass "-c" (without the quotes) as a command argument so that I can debug it, maybe you need to do the same.
In Visual Studio in the project properties you can find the Command arguments field in Properties/Debugging.