Hi I am trying to get acronyms in my document but I am continuously failing in doing that.
\documentclass{scrbook}
\usepackage[acronym]{glossaries}
\makeglossaries
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\include{ch1}
end{document}
and my acronym code is in the chapter file
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\newacronym{wlan}{WLAN}{Wireless Local Area Network}
You're defining the acronym wlan, but you are using the acronym WLAN. Decide on which of the two you want and the be consistent:
\documentclass{scrbook}
\usepackage[acronym]{glossaries}
\makeglossaries
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\newacronym{WLAN}{WLAN}{Wireless Local Area Network}
\end{document}
Related
How can I make my acronyms such that if someone clicks on acronyms then gets redirected to the actual list where all the acronyms are listed?
\documentclass{scrbook}
\usepackage[acronym]{glossaries}
\makeglossaries
\input{acronyms}
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\chapter{ch2}
\acrfull{LAN} is used as a trial for my example and problem
\arcshort{LAN}
\end{document}
with acronyms.tex:
\newacronym{WLAN}{WLAN}{Wireless Local Area Network}
\newacronym{LAN}{LAN}{Local Area Network}
Adding the hyperref package will give you cross-references between your acronyms and the list of acronyms:
\documentclass{scrbook}
\usepackage{hyperref}
\usepackage[acronym]{glossaries}
\makeglossaries
\newacronym{WLAN}{WLAN}{Wireless Local Area Network}
\newacronym{LAN}{LAN}{Local Area Network}
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\chapter{ch2}
\acrfull{LAN} is used as a trial for my example and problem
\end{document}
Hi I'm using Overleaf for my dissertation and this warning started popping up recently:
Citation 'objprogen' on page 1 undefined on input line 8.
This citation is already created as seen below in the 'sources.bib' file:
#article{objprogen,
author={Guo, Wenzhong and Lin, Renjie and Wang, Shiping and Xiong, Neal},
booktitle={2018 9th International Symposium on Parallel Architectures, Algorithms and
Programming (PAAP)},
title={Object Proposal Generation for Unsupervised Object Localization},
year={2018},
volume={},
number={},
pages={235-242},
doi={10.1109/PAAP.2018.00046}}
This is my main.tex file:
\documentclass[a4paper]{article}
\usepackage{blindtext, graphicx}
\usepackage{csquotes}
\usepackage[hidelinks]{hyperref}
\usepackage{url}
\usepackage[style=authoryear-ibid,backend=biber]{biblatex}
\hyphenation{op-tical net-works semi-conduc-tor}
\bibliography{sources.bib}
\begin{document}
\title{Can image recognition systems be successfully integrated with existing VIN databases
irrespective of the vehicle manufacturer}
\author{myname}
\maketitle{}
\input{includes/01-Abstract}
\input{includes/02-Introduction}
\input{includes/03-Literature}
\input{includes/04-Methodology}
\input{includes/05-Findings}
\input{includes/06-Conclusion}
\input{includes/07-Appendix}
\end{document}
I had the same problem and solved it by adding \bibliographystyle{plain} (of course you could in principle use other styles). For me the structure of the tex file is the following
\documentclass[oneside, a4paper, onecolumn, 11pt]{article}
%%some packages%%
\begin{document}
%%% some stuff
\bibliographystyle{plain}
\bibliography{bibfile} %bibfile name without the .bib extension
\end{document}
So contrary to you the \bibliography is also inside the document environment.
Hi I'm using LaTeX to write a literature review and BibLaTeX to print my sources and bibliography.
I would like to get an overview of all the keywords used in the articles I have gathered so far.
Since I have them all in a .bib file I figured that there probably is some easy way to get all the keywords from there that utilises BibLaTeX and the BibTeX-format of the file with the info.
From what I can gather BibLaTeX has the support for using keywords to sort the bibliography, or include/exclude certain sources based on keywords, but I can't find if or how I can print other information from the .bib than the full source. I've found \printfield in the documentation but it's not recognised when I use it in my document, even though the \textcite and the \printbibliography works fine so I'm guessing I'm using it wrong. Here's how I've tried to use it:
\documentclass[a4paper]{article}
\usepackage[english]{babel}
\usepackage[utf8]{inputenc}
\usepackage{csquotes}
\usepackage[style=authoryear,backend=biber]{biblatex}
\addbibresource{sample.bib}
\title{Test}
\author{Me}
\begin{document}
\maketitle
\section*{Citation examples}
\parencite{Smith:2012qr}.
\printfield{keywords}
\printbibliography
\end{document}
I hope my question is clear enough.
Thank you.
Based on this question https://tex.stackexchange.com/questions/332292/listing-indexing-and-linking-keywords-in-biblatex you could use one of the packages for index creation, e.g. imakeidx:
\documentclass{article}
\begin{filecontents*}[overwrite]{\jobname.bib}
#article{Padial2010,
title={The Integrative Future Of Taxonomy},
author={Padial, J.M. and Miralles, A. and la Riva, I.D. and Vences, M.},
journal={Frontiers in Zoology},
year={2010},
volume={7},
number={16},
pages={1--14},
note={Cited by 4},
abstract={Text},
publisher={Some Publishing},
doi={10.1186/1742-9994-7-16},
issn={1742-9994},
file={./2004_Jensen_Homecoming.pdf},
keywords={biology, taxonomy},
}
#article{Padissal2010,
title={The Integrative Future Of Taxonomy},
author={Padial, J.M. and Miralles, A. and la Riva, I.D. and Vences, M.},
journal={Frontiers in Zoology},
year={2010},
volume={7},
number={16},
pages={1--14},
note={Cited by 4},
abstract={Text},
publisher={Some Publishing},
doi={10.1186/1742-9994-7-16},
issn={1742-9994},
file={./2004_Jensen_Homecoming.pdf},
keywords={math, taxonomy},
}
\end{filecontents*}
\usepackage{biblatex}
\addbibresource{\jobname.bib}
\usepackage{imakeidx}
\makeindex[name=keywords, title=List of Keywords]
\DeclareIndexFieldFormat{keywords}{\forcsvfield{\index[keywords]}{keywords}}
\AtEveryBibitem{\indexfield{keywords}}
\begin{document}
\nocite{*}
\printbibliography
\printindex[keywords]
\end{document}
I am trying to make a .tex template for a book of abstracts for the conference. I want the template to be compilable, so the participants are able to see their abstracts separately before submitting. Moreover I want to use the files to compile the book of abstracts with table of contents and titles.
So, I have master file
\documentclass[12pt]{combine}
\usepackage{authblk}
\begin{document}
\tableofcontents
\begin{papers}
\coltocauthor{Crist\'{o}bal Josevich Junta, Fyodor Simeonovich Kivrin}
\coltoctitle{Title of the first abstract}
\import{first}
\coltocauthor{Roman Oyra-Oyra}
\coltoctitle{Title of the second abstract}
\import{second}
\end{papers}
\end{document}
And two imported files are:
\documentclass{article}
\usepackage{authblk}
\title{Title of the first abstract}
\author[1]{Crist\'{o}bal Josevich Junta}
\author[2]{Fyodor Simeonovich Kivrin}
\affil[1]{Department of the Meaning of Life}
\affil[2]{Department of Linear Happiness}
\begin{document}
\maketitle
Text of the first abstract.
\end{document}
and
\documentclass{article}
\usepackage{authblk}
\title{Title of the second abstract}
\author[1]{Roman Oyra-Oyra}
\affil[1]{Laboratory of the most unexpected sciences}
\begin{document}
\maketitle
Text of the second abstract.
\end{document}
The problem is the second \maketitle does not print authors names and their affiliation.
I have tried using redefined \settitle instead of \maketitle
\makeatletter
\newcommand{\settitle}{\#maketitle}
\makeatother
it did not help.
Also, I tried titling package, which led to no change.
I want \maketitle to print the names and affiliations or to find out the better way to automatically make titles for each abstract.
Let's say I have some labels in a part of the document that I exclude using pagesel. However, I want to reference them in the part that I am including. How is that possible?
Below is a minimum example which should print "This is reference 1", but instead prints "This is reference ??".
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[files,2-]{pagesel}
\title{Pagesel problem}
\begin{document}
\maketitle
\section{Introduction}
This is label \label{ref:label1}.
\cleardoublepage
This is reference \ref{ref:label1}
\end{document}
You can retain the labels from pages not shown by first compiling your whole document without the pagesel package and then, in a second step, use the pagesel package with the default nofile option:
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[
%files,
2-]{pagesel}
\title{Pagesel problem}
\begin{document}
\maketitle
\section{Introduction}
This is label \label{ref:label1}.
\cleardoublepage
This is reference \ref{ref:label1}
\end{document}
Other possible approach: compile the complete document and then use a tool like pdftk to extract the pages you like.