How can I make my acronyms such that if someone clicks on acronyms then gets redirected to the actual list where all the acronyms are listed?
\documentclass{scrbook}
\usepackage[acronym]{glossaries}
\makeglossaries
\input{acronyms}
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\chapter{ch2}
\acrfull{LAN} is used as a trial for my example and problem
\arcshort{LAN}
\end{document}
with acronyms.tex:
\newacronym{WLAN}{WLAN}{Wireless Local Area Network}
\newacronym{LAN}{LAN}{Local Area Network}
Adding the hyperref package will give you cross-references between your acronyms and the list of acronyms:
\documentclass{scrbook}
\usepackage{hyperref}
\usepackage[acronym]{glossaries}
\makeglossaries
\newacronym{WLAN}{WLAN}{Wireless Local Area Network}
\newacronym{LAN}{LAN}{Local Area Network}
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\chapter{ch2}
\acrfull{LAN} is used as a trial for my example and problem
\end{document}
Related
Hi I am trying to get acronyms in my document but I am continuously failing in doing that.
\documentclass{scrbook}
\usepackage[acronym]{glossaries}
\makeglossaries
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\include{ch1}
end{document}
and my acronym code is in the chapter file
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\newacronym{wlan}{WLAN}{Wireless Local Area Network}
You're defining the acronym wlan, but you are using the acronym WLAN. Decide on which of the two you want and the be consistent:
\documentclass{scrbook}
\usepackage[acronym]{glossaries}
\makeglossaries
\begin{document}
\mainmatter
\printglossary[type=\acronymtype]
\chapter{ch1}
\acrfull{WLAN} is used as a trial for my example and problem
\newacronym{WLAN}{WLAN}{Wireless Local Area Network}
\end{document}
Hi I'm using LaTeX to write a literature review and BibLaTeX to print my sources and bibliography.
I would like to get an overview of all the keywords used in the articles I have gathered so far.
Since I have them all in a .bib file I figured that there probably is some easy way to get all the keywords from there that utilises BibLaTeX and the BibTeX-format of the file with the info.
From what I can gather BibLaTeX has the support for using keywords to sort the bibliography, or include/exclude certain sources based on keywords, but I can't find if or how I can print other information from the .bib than the full source. I've found \printfield in the documentation but it's not recognised when I use it in my document, even though the \textcite and the \printbibliography works fine so I'm guessing I'm using it wrong. Here's how I've tried to use it:
\documentclass[a4paper]{article}
\usepackage[english]{babel}
\usepackage[utf8]{inputenc}
\usepackage{csquotes}
\usepackage[style=authoryear,backend=biber]{biblatex}
\addbibresource{sample.bib}
\title{Test}
\author{Me}
\begin{document}
\maketitle
\section*{Citation examples}
\parencite{Smith:2012qr}.
\printfield{keywords}
\printbibliography
\end{document}
I hope my question is clear enough.
Thank you.
Based on this question https://tex.stackexchange.com/questions/332292/listing-indexing-and-linking-keywords-in-biblatex you could use one of the packages for index creation, e.g. imakeidx:
\documentclass{article}
\begin{filecontents*}[overwrite]{\jobname.bib}
#article{Padial2010,
title={The Integrative Future Of Taxonomy},
author={Padial, J.M. and Miralles, A. and la Riva, I.D. and Vences, M.},
journal={Frontiers in Zoology},
year={2010},
volume={7},
number={16},
pages={1--14},
note={Cited by 4},
abstract={Text},
publisher={Some Publishing},
doi={10.1186/1742-9994-7-16},
issn={1742-9994},
file={./2004_Jensen_Homecoming.pdf},
keywords={biology, taxonomy},
}
#article{Padissal2010,
title={The Integrative Future Of Taxonomy},
author={Padial, J.M. and Miralles, A. and la Riva, I.D. and Vences, M.},
journal={Frontiers in Zoology},
year={2010},
volume={7},
number={16},
pages={1--14},
note={Cited by 4},
abstract={Text},
publisher={Some Publishing},
doi={10.1186/1742-9994-7-16},
issn={1742-9994},
file={./2004_Jensen_Homecoming.pdf},
keywords={math, taxonomy},
}
\end{filecontents*}
\usepackage{biblatex}
\addbibresource{\jobname.bib}
\usepackage{imakeidx}
\makeindex[name=keywords, title=List of Keywords]
\DeclareIndexFieldFormat{keywords}{\forcsvfield{\index[keywords]}{keywords}}
\AtEveryBibitem{\indexfield{keywords}}
\begin{document}
\nocite{*}
\printbibliography
\printindex[keywords]
\end{document}
I am trying to use the LaTeX article document class to create a simple paper with the authors listed on the title page with their (potentially multiple repeating) affiliations as numeric footnotes and other author comments as symbolic footnotes. For example, I want something like
However, I haven't been able to make this happen despite trying multiple different solutions. Is there a simple way to do this?
I have tried using the bigfoot package to create multiple different types of footnotes combined with footmisc with the multiple option to get multiple footnote markers with commas between them, but I end up with superposed markers and no footnotes. My minimal latex document is:
\documentclass{article}
\title{My title}
\usepackage[multiple]{footmisc}
\usepackage{bigfoot}
\DeclareNewFootnote{AAffil}[arabic]
\DeclareNewFootnote{ANote}[fnsymbol]
\author{
David Kaplan\footnoteAAffil{A University}\footnoteAAffil{Another University}\footnoteANote{Corresponding author}\footnoteANote{Equal contributors}
\and
Prince Charming\FootnotemarkAAffil{2}\FootnotemarkANote{2}
}
\date{\today}
\begin{document}
\maketitle
\end{document}
And the output I get is:
One possibility is to switch to the amsart class and then using the amsaddr package:
\documentclass{amsart}
\title{My title}
\author{David Kaplan $^{1,2,\ast,\dagger}$}
\address{$^1$A University}
\address{$^2$Another University}
\address{$^{\ast}$Corresponding author}
\address{$^{\dagger}$Equal contributors}
\author{Prince Charming $^{1,\dagger}$}
\usepackage[foot]{amsaddr}
\begin{document}
\maketitle
\end{document}
With help from others, I posted a solution to this question here. For completeness, I am copying the solution below:
\documentclass{article} % <---- No titlepage
\title{My title}
%\usepackage[dont-mess-around]{fnpct} % <---- I decided not to use fnpct, but rather put in the commas by hand
\usepackage{bigfoot}
\DeclareNewFootnote{AAffil}[arabic]
\DeclareNewFootnote{ANote}[fnsymbol]
\usepackage{etoolbox}
\makeatletter
\patchcmd\maketitle{\def\#makefnmark{\rlap{\#textsuperscript{\normalfont\#thefnmark}}}}{}{}{}
\makeatother
% Hook into the \thanks command for the article class to print the footnotes
\makeatletter
\def\thanksAAffil#1{% <--- These %'s are necessary for spacing
\footnotemarkAAffil\protected#xdef\#thanks{\#thanks%
\protect\footnotetextAAffil[\the \c#footnoteAAffil]{#1}}%
}
\def\thanksANote#1{%
\footnotemarkANote%
\protected#xdef\#thanks{\#thanks%
\protect\footnotetextANote[\the \c#footnoteANote]{#1}}%
}
\makeatother
\author{% <---- Not sure if these %'s are necessary, but can't hurt
David Kaplan%
\thanksAAffil{A University}$^{,}$\thanksAAffil{Another University}$^{,}$%
\thanksANote{Corresponding author}$^{,}$\thanksANote{Equal contributors}%
, %
Prince Charming%
\footnotemarkAAffil[2]$^{,}$\thanksAAffil{Still another university}$^{,}$\footnotemarkANote[2]$^{,}$%
\thanksANote{Another note}%
, %
Mohamed Ali%
\thanksAAffil{I am the greatest U.}%
}
\date{\today}
\begin{document}
\maketitle
\begin{abstract}
This is the abstract.
\end{abstract}
\section{Introduction}
More Text
\end{document}
I am trying to make a .tex template for a book of abstracts for the conference. I want the template to be compilable, so the participants are able to see their abstracts separately before submitting. Moreover I want to use the files to compile the book of abstracts with table of contents and titles.
So, I have master file
\documentclass[12pt]{combine}
\usepackage{authblk}
\begin{document}
\tableofcontents
\begin{papers}
\coltocauthor{Crist\'{o}bal Josevich Junta, Fyodor Simeonovich Kivrin}
\coltoctitle{Title of the first abstract}
\import{first}
\coltocauthor{Roman Oyra-Oyra}
\coltoctitle{Title of the second abstract}
\import{second}
\end{papers}
\end{document}
And two imported files are:
\documentclass{article}
\usepackage{authblk}
\title{Title of the first abstract}
\author[1]{Crist\'{o}bal Josevich Junta}
\author[2]{Fyodor Simeonovich Kivrin}
\affil[1]{Department of the Meaning of Life}
\affil[2]{Department of Linear Happiness}
\begin{document}
\maketitle
Text of the first abstract.
\end{document}
and
\documentclass{article}
\usepackage{authblk}
\title{Title of the second abstract}
\author[1]{Roman Oyra-Oyra}
\affil[1]{Laboratory of the most unexpected sciences}
\begin{document}
\maketitle
Text of the second abstract.
\end{document}
The problem is the second \maketitle does not print authors names and their affiliation.
I have tried using redefined \settitle instead of \maketitle
\makeatletter
\newcommand{\settitle}{\#maketitle}
\makeatother
it did not help.
Also, I tried titling package, which led to no change.
I want \maketitle to print the names and affiliations or to find out the better way to automatically make titles for each abstract.
Let's say I have some labels in a part of the document that I exclude using pagesel. However, I want to reference them in the part that I am including. How is that possible?
Below is a minimum example which should print "This is reference 1", but instead prints "This is reference ??".
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[files,2-]{pagesel}
\title{Pagesel problem}
\begin{document}
\maketitle
\section{Introduction}
This is label \label{ref:label1}.
\cleardoublepage
This is reference \ref{ref:label1}
\end{document}
You can retain the labels from pages not shown by first compiling your whole document without the pagesel package and then, in a second step, use the pagesel package with the default nofile option:
\documentclass{article}
\usepackage[utf8]{inputenc}
\usepackage[
%files,
2-]{pagesel}
\title{Pagesel problem}
\begin{document}
\maketitle
\section{Introduction}
This is label \label{ref:label1}.
\cleardoublepage
This is reference \ref{ref:label1}
\end{document}
Other possible approach: compile the complete document and then use a tool like pdftk to extract the pages you like.