i'm trying to update imagick module version from version 3.5.1 https://ibb.co/3hJXmtW to latest 3.6
For doing this i start reading documentation "Install Howto" here https://centos.pkgs.org/7/remi-x86_64/php-pecl-imagick-im6-3.6.0-1.el7.remi.5.4.x86_64.rpm.html
Here the result of first step: https://ibb.co/TcwjYR3
This is the result of second step: https://ibb.co/xFN1wN3
I'm following the correct documentation?
Thanks
For a proper configuration of the repository, simply follow the Wizard instructions.
In your 1st step, you download the repository home page, which does not make sense.
Notice: you have the choice between
php-pecl-imagick-im6 which use ImageMagick version 6
php-pecl-imagick-im7 which use ImageMagick version 7
Provided APIs are slightly different
some methods are deprecated with IM6 and removed with IM7
additional methods available with IM7
P.S. yum install php-imagick (as explained by the wizard for all extensions) will work and install the better candidate.
Related
Why can't I install this aqueduct?
Although I have installed dart before as shown in the picture:
It's important to ensure that the dart SDK is in the PATH. You can easily test it by trying to use pub or dart.
One way to ensure it's in the PATH is by creating a .bashrc file in your user's folder.
Then add the following:
export PATH="$PATH:/path/to/dart/installation/bin/folder"
First of all check if dart is installed using dart --version if it gives a command not found error that means it is not installed (hence why you cannot install aqueduct since it requires pub which is shipped with the dart sdk).
To install dart on macOS first install brew and the follow the instruction here https://dart.dev/get-dart (don't run brew switch dart 2.1.0 as shown in the screenshot since it makes no sense because current the latest stable is 2.9.1 and 2.1.0 is pretty old).
If you don't want to install brew you can download the sdk here (for your system) extract it, and update your path variable as #gabriel-octávio says.
I have some problems following the tutorial "http://wiki.ros.org/Industrial/Tutori...". I have installed ROS Melodic and i want to use an slave ethercat like the "IO rack: EtherCAT Couper, 8 DI, & 8DO (all Beckhoff)" but different brand (Omron), and when i try to follow the step 1: Install OROCOS toolchain for ROS it return a error when i follow the tutorial "http://wiki.ros.org/orocos_toolchain" and execute the command "rosdep install orocos_toolchain" the error is the next: ERROR: Rosdep cannot find all required resources to answer your query Missing resource orocos_toolchain.
I use ROS 1 Distro: melodic SO: Ubuntu 18:04
Someone can i help me, please. I was searching another ways to install OROCOS toolchain but i didn't have success.
Most of the readily available documentation for installing / using Orocos is out of date. For example, that page you were at is (at timeof writing) 6 years old, for an end-of-life distro.
The up-to-date info is on their github and website (The website, for you right now, is probably less useful, but this page still is). Respectively, you should now install that fat stack as sudo apt install ros-melodic-rtt-ros-integration, aka install from binary sources. Make sure to pay careful attention to Building ROS-Based Orocos Components, because they have their own system which changes the CMake process. There's also other packages that they/others keep from other stacks, you can see the whole list by trying to autocomplete apt install ros-melodic-rtt-
I've created a new MeanJS project using Yeoman. It installs just fine. When I want to add a new module using yo meanjs:angular-module mymodule, it tries to create a new project ("Which mean.js version would you like to generate") instead of just adding the new module.
Where should I look for errors?
I'm using node v0.12.7 and npm v2.11.3.
Yeah, I know this could be confusing, at least when you starting with Meanjs. You probably used a version greater than 0.3.0 (stable) and sub-generators like yo meanjs:angular-module are only available (by that time of writing this) with version 0.3.0 (stable). Look at the red message top at this page: http://meanjs.org/generator.html What's confusing here is that they recommended on their page to install the application using the yeoman but after you did that you expect to be able to use sub-generators... If you want use subs, please use 0.3.0. and I suggest you to use supported Node.js and npm versions (http://meanjs.org/docs/0.3.x/#troubleshooting):
MongoDB
MongoDB version 2.4.x is supported.
Node.js
Node version 0.10.x is supported.
npm
npm version 1.3.x is supported.
I'm trying to use luagraph, a binding to the graphviz library:
http://luagraph.luaforge.net/index.html
To install, I'm using luarocks in Mac OS X. The following command is executed in bash:
luarocks install luagraph
The output is the following:
Installing https://luarocks.org/luagraph-1.0.4-1.src.rock... Using
https://luarocks.org/luagraph-1.0.4-1.src.rock... switching to 'build'
mode
Error: Could not find expected file graphviz/graph.h, or
graphviz/graph.h for GRAPHVIZ -- you may have to install GRAPHVIZ in
your system and/or pass GRAPHVIZ_DIR or GRAPHVIZ_INCDIR to the
luarocks command. Example: luarocks install luagraph
GRAPHVIZ_DIR=/usr/local
I have been installed graphviz using homebrew, but I can't figure out how to pass GRAPHVIZ_DIR or GRAPHVIZ_INCDIR properly.
How can I install luagraph?
I've updated LuaGRAPH a couple of weeks ago. It now supports the newest version of Graphviz based on the cgraph library instead of the old graph library.
There is one drawback: I couldn't get luagraph to run on Windows using mingw because of some runtime library issues (compiler and dll compatibility probably). Please look at the README file for more details.
I personally never produced a rockspec for this module. This was created by someone else based on a fork of my luagraph library.
Installation without Luarocks is simple. Download from
https://github.com/hleuwer/luagraph
and follow the instruction in the documentation and the README file. You need adopt a simple config file which is included by make.
Herbert
Well, luaGRAPH is still the top result when searching for lua and graph. So the question is still standing.
And, unfortunately, the answer is: luagraph is OLD, the last update happened before the ubuntu 14.04 was released. And there seem to be some notable changes in the system itself, the flags the error message show do not seem to work. On top of that, graphviz is now about 20 releases newer than the luarock recommends.
There now is a bare bone alternative lua package: graphviz
It is extremely basic, and documentation in not at all informative, but at least it works.
update: Luagraph may be working again, but not through rocks. See the other answer.
I already have part of a program running in Python 3 but I need OpenCV (or SimpleCV), for a robotic vehicle, but I haven't found any install commands that seem to work, other than for Python 2.7.
If it is compatible could you please include instructions (/links to) for installation of the module?
I am using Ubuntu 14.
Maybe a little late to answer, but it's actually supported on OpenCV version 3 (in alpha state nowadays). I have successfully managed to install it, on MacOS, but I guess it would be similar on Ubuntu.
Now you have separated options for python2 and python3 when using Cmake. So you'll have to set those to make it work. That's all I needed to set:
BUILD_opencv_python3
PYTHON3_LIBRARY
PYTHON3_INCLUDE_DIR
PYTHON3_INCLUDE_DIR2
PYTHON3_NUMPY_INCLUDE_DIRS
...
Here you can find more detailed description: Link
Luigolas is correct that OpenCV 3.0 supports Python 3.x bindings. It was in release candidate status since April and the production version was released on 4 June 2015. Unfortunately for some reason the downloadable installation program on the OpenCV site does not contain a Python 3.x-compatible cv2.pyd file.
OP asked about Ubuntu but for those requiring a Windows installer, use Christoph Gohlke's site, which maintains Windows binaries for many Python packages, including OpenCV 3.0 with Python 3.x bindings. Visit:
http://www.lfd.uci.edu/~gohlke/pythonlibs/#opencv
To install, just download the 64-bit or 32-bit .whl file appropriate for your system, then run pip install [filename]. Then the instruction import cv2 should work in your Python 3.x interpreter.