When I try to run wsl.exe or wslcofig.exe they are running perfect, but when I try to add options or arguments I am receiveing the following error message "The system cannot find the path specified." , hence I can't start Docker-Desktop because it is running wsl with some options automatically .
If I disable WSL2 Integration , the docker is starting successfully, unfortunately I need to run Docker with WSL2 integration enabled.
Here is the error log:
System.InvalidOperationException:
Failed to deploy distro docker-desktop to C:\Users\Abdelrahman\AppData\Local\Docker\wsl\distro: exit code: -1
stdout: The system cannot find the path specified.
stderr:
at Docker.ApiServices.WSL2.WslShortLivedCommandResult.LogAndThrowIfUnexpectedExitCode(String prefix, ILogger log, Int32 expectedExitCode) in C:\workspaces\PR-15387\src\github.com\docker\pinata\win\src\Docker.ApiServices\WSL2\WslCommand.cs:line 146
at Docker.Engines.WSL2.WSL2Provisioning.<DeployDistroAsync>d__17.MoveNext() in C:\workspaces\PR-15387\src\github.com\docker\pinata\win\src\Docker.Desktop\Engines\WSL2\WSL2Provisioning.cs:line 169
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.WSL2Provisioning.<ProvisionAsync>d__8.MoveNext() in C:\workspaces\PR-15387\src\github.com\docker\pinata\win\src\Docker.Desktop\Engines\WSL2\WSL2Provisioning.cs:line 78
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.LinuxWSL2Engine.<DoStartAsync>d__26.MoveNext() in C:\workspaces\PR-15387\src\github.com\docker\pinata\win\src\Docker.Desktop\Engines\WSL2\LinuxWSL2Engine.cs:line 104
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.TaskExtensions.<WrapAsyncInCancellationException>d__0.MoveNext() in C:\workspaces\PR-15387\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\TaskExtensions.cs:line 29
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__5.MoveNext() in C:\workspaces\PR-15387\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 67
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__5.MoveNext() in C:\workspaces\PR-15387\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 92
wsl.exe and bash.exe are exists in C:\Windows\System 32
My windows version is Windows 10 Enterprise with Ubuntu 16.0.4
Your help is highly appreciated
Related
I've a clean installation of Docker Desktop and I did move data to secondary disk using this guide: https://dev.to/kimcuonthenet/move-docker-desktop-data-distro-out-of-system-drive-4cg2
I was using normally with a small application, then I decided to restore a .sql file (6GB backup file of a database with approximately 60GB - I have plenty space). It was 2 containers simultaneously. After some hours restoring, both containers exited with code 1.
After that, Docker Desktop crashed and when I try to start, I get a Docker Desktop dialog stating "An error occurred":
Complete error message:
Docker.Core.HttpBadResponseException:
{"message":"2 errors occurred:\n\t* starting keep alive in the data distro: waiting for wsl-keepalive to be ready: running wsl-keepalive in \"docker-desktop-data\": exit status 0xffffffff\n\t* checking if isocache exists: CreateFile \\\\wsl$\\docker-desktop-data\\isocache\\: The network name cannot be found.\n\n"}
at Docker.Core.GoBackend.GoBackendClient.<PostNoBodyWithError>d__19.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Core\GoBackend\GoBackendClient.cs:line 226
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.LinuxWSL2Engine.<DoStartAsync>d__11.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\LinuxWSL2Engine.cs:line 54
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.TaskExtensions.<WrapAsyncInCancellationException>d__0.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\TaskExtensions.cs:line 29
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__6.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 91
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__6.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 118
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.EngineStateMachine.<StartAsync>d__15.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\EngineStateMachine.cs:line 72
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.Engines.<StartAsync>d__23.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Engines\Engines.cs:line 109
Apparently, I could just restore to factory defaults, but then I'd lose data from the small application that I already had running and I don't want that.
I've rebooted and tried to execute with admin privileges but nothing. I don't know how to access .vhdx file, so no clue on how to proceed.
You guys have any ideas on how can I debug this correctly?
I tried installing Docker in windows 10; I activated WSL and virtualization in windows features too, and also installed the latest ubuntu distro.
But when starting docker it holds on for little bit longer than usual and says "failed to start docker".
Following is first error I got:
Docker.Core.HttpBadResponseException:
{"message":"1 error occurred:\n\t* starting WSL integration service: synchronising agents: starting added distros: 1 error occurred:\n\t* waiting for WSL integration for Ubuntu: timed out while polling for WSL distro integration to become ready in \"Ubuntu\"\n\n\n\n"}
at Docker.Core.GoBackend.GoBackendClient.<PostNoBodyWithError>d__19.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Core\GoBackend\GoBackendClient.cs:line 226
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.LinuxWSL2Engine.<DoStartAsync>d__11.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\LinuxWSL2Engine.cs:line 54
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.TaskExtensions.<WrapAsyncInCancellationException>d__0.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\TaskExtensions.cs:line 29
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__6.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 91
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__6.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 118
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.EngineStateMachine.<StartAsync>d__15.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\EngineStateMachine.cs:line 72
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.Engines.<StartAsync>d__23.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Engines\Engines.cs:line 109
And then on later tries the error I got was different:
Docker.Core.HttpBadResponseException:
{"message":"1 error occurred:\n\t* starting WSL integration service: integration service is already running\n\n"}
at Docker.Core.GoBackend.GoBackendClient.<PostNoBodyWithError>d__19.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Core\GoBackend\GoBackendClient.cs:line 226
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.LinuxWSL2Engine.<DoStartAsync>d__11.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\LinuxWSL2Engine.cs:line 54
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.TaskExtensions.<WrapAsyncInCancellationException>d__0.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\TaskExtensions.cs:line 29
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__6.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 91
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__6.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 118
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.EngineStateMachine.<StartAsync>d__15.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\EngineStateMachine.cs:line 72
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.Engines.<StartAsync>d__23.MoveNext() in C:\workspaces\4.16.x\src\github.com\docker\pinata\win\src\Docker.Engines\Engines.cs:line 109
I have tried most of the things I searched online. I uninstalled, shut down the pc and installed again as admin; all in vein. And yes, I also enabled WSL2.
Then I again uninstalled and cleared all docker folders on the system and re-installed, shutting down and installing. No difference.
I was facing the same issue in Windows 11 home.
The below commands fixed it:
stop docker desktop
wsl --shutdown
wsl
start docker desktop
Make sure you are using WSL 2 version. You can update version with below command.
wsl --set-default-version 2
After updating version restart system, issue should be resolved.
Similar to previous answers. In my case, after shutting Docker service and Docker desktop and then wsl --shutdown.
I then updated wsl with wsl --update which installed version 2 and started Docker service and then Docker Desktop and all worked fine again.
I installed docker and ran it, it was ok. but after a restart i have this problem:
System.InvalidOperationException:
job failed with message: 'DockerDesktopVM' failed to start. (Virtual machine ID 4160C5EC-02BD-46FA-99E3-3B99203D966A)
'DockerDesktopVM' Synthetic SCSI Controller (Instance ID 7DF00258-64CD-42EE-9C46-40C402778132): Failed to Power on with Error 'The file or directory is corrupted and unreadable.' (0x80070570). (Virtual machine ID 4160C5EC-02BD-46FA-99E3-3B99203D966A)
'DockerDesktopVM': Attachment 'F:\Docker_data\DockerDesktop\DockerDesktop.vhdx' failed to open because of error: 'The file or directory is corrupted and unreadable.' (0x80070570). (Virtual machine ID 4160C5EC-02BD-46FA-99E3-3B99203D966A)
at Docker.Backend.HyperVInfrastructure.HandleUpdatedJob(CIMConcreteJob updatedJob) in C:\workspaces\PR-18003\src\github.com\docker\pinata\win\src\Docker.Backend\HyperV\HyperVInfrastructure.cs:line 772
at Docker.Backend.HyperVInfrastructure.d__40.MoveNext() in C:\workspaces\PR-18003\src\github.com\docker\pinata\win\src\Docker.Backend\HyperV\HyperVInfrastructure.cs:line 706
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.Backend.HyperVInfrastructure.d__32.MoveNext() in C:\workspaces\PR-18003\src\github.com\docker\pinata\win\src\Docker.Backend\HyperV\HyperVInfrastructure.cs:line 554
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Backend.HyperV.d__6.MoveNext() in C:\workspaces\PR-18003\src\github.com\docker\pinata\win\src\Docker.Backend\HyperV\HyperV.cs:line 105
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Backend.HttpAPI.HyperVController.d__7.MoveNext() in C:\workspaces\PR-18003\src\github.com\docker\pinata\win\src\Docker.Backend\HttpAPI\HyperVController.cs:line 49
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Threading.Tasks.TaskHelpersExtensions.d__1`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Web.Http.Controllers.ApiControllerActionInvoker.d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Web.Http.Controllers.ActionFilterResult.d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Web.Http.Dispatcher.HttpControllerDispatcher.d__15.MoveNext()
I reinstalled docker and again in first it was ok but after restart the problem reappeared.
My windows is serever 2019.
when i delete DockerDesktop.vhdx file, docker will run.
When i installed the docker desktop exe file version : 4.8.1,
i am unable to start the application settings and autometically one popup appearing
Error Image
The actual stack trace inside image is :
Failed to set version to docker-desktop: exit code: -1
stdout: Unsupported console settings. In order to use this feature, the legacy console must be disabled.
stderr:
at Docker.ApiServices.WSL2.WslShortLivedCommandResult.LogAndThrowIfUnexpectedExitCode(String prefix, ILogger log, Int32 expectedExitCode) in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\WSL2\WslCommand.cs:line 146
at Docker.Engines.WSL2.WSL2Provisioning.<ProvisionAsync>d__8.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\WSL2Provisioning.cs:line 81
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.LinuxWSL2Engine.<DoStartAsync>d__28.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\LinuxWSL2Engine.cs:line 178
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.TaskExtensions.<WrapAsyncInCancellationException>d__0.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\TaskExtensions.cs:line 29
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__5.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 67
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.ApiServices.StateMachines.StartTransition.<DoRunAsync>d__5.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 92
When i diagnosed with the command : & "C:\Program Files\Docker\Docker\resources\com.docker.diagnose.exe" check
Then i got the diagnosed issue
WSL Distribution docker-desktop-data is missing, it says.
When i ran the command : wsl -l -v
i got : description
If i am trying to run any docker command then : Issue
i am getting
I am not sure what to do next, i have already uninstalled WSL and then again installed it and set it to WSL2 then again installed the docker desktop after removing all the temp files from C drive and Appdata folder.
If anyone know the solution to this please respond.
Windows 11
Build : 22000.527
Image : Screenshot
Windows Subsystem for Linux : Checked
Hyper-V : Checked
System.InvalidOperationException:
Failed to deploy distro docker-desktop to C:\Users\MohNawawi\AppData\Local\Docker\wsl\distro: exit code: -1
stdout: Error: 0xffffffff
stderr:
at Docker.ApiServices.WSL2.WslShortLivedCommandResult.LogAndThrowIfUnexpectedExitCode(String prefix, ILogger log, Int32 expectedExitCode) in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\WSL2\WslCommand.cs:line 146
at Docker.Engines.WSL2.WSL2Provisioning.d__17.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\WSL2Provisioning.cs:line 168
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.WSL2Provisioning.d__8.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\WSL2Provisioning.cs:line 77
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.WSL2.LinuxWSL2Engine.d__28.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.Engines\WSL2\LinuxWSL2Engine.cs:line 178
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.TaskExtensions.d__0.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\TaskExtensions.cs:line 29
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.StartTransition.d__5.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 67
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.ApiServices.StateMachines.StartTransition.d__5.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\StartTransition.cs:line 92
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.StateMachines.EngineStateMachine.d__14.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\StateMachines\EngineStateMachine.cs:line 69
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.Engines.Engines.d__29.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.Engines\Engines.cs:line 339
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at Docker.Engines.Engines.d__29.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.Engines\Engines.cs:line 357
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Docker.ApiServices.Services.DesktopService.d__4.MoveNext() in C:\workspaces\PR-17296\src\github.com\docker\pinata\win\src\Docker.ApiServices\Services\DesktopService.cs:line 39
I hope someone can help me
Thank you so much.
I finally got this resolved after following these steps:
Uninstall Docker and WSL 2 kernel.
Go to the Control Panel -> Programs -> Turn Windows features on or
off Uncheck the following: Containers, Hyper-V, Windows Subsystem
for Linux
Restart the system
Install Docker without the WSL2 enabled/checked on the first screen
Go to the Control Panel -> Programs -> Turn Windows features on or off Turn on/check the Windows Subsystem for Linux Restart the
system.
Do not install the WSL2 Kernel when reinstalling Docker.
I was not able to launch the Ubuntu WSL initially (got the same error messages in the first post), I then ran "wsl --update" and was able to launch the Ubuntu WSL and got Docker started running again.
My system now has wsl kernel 4.19.128 and Build 20201.rs_prerelease.200822-1922, and the default wsl version is now version 2.
Hope this helps. Cheers.
We just had this issue and managed to fix it. Seems like it is because a key step in the install was skipped - you probably don't have a linux distribution locally installed. We did an uninstall of docker (v 4.5.1) and then a clean install of Docker version 4.3.0.. Then a restart of the computer. It then prompted us to go to this page and follow the steps from step 4 onwards.
https://learn.microsoft.com/en-us/windows/wsl/install-manual#step-4---download-the-linux-kernel-update-package
Follow those steps:
Uncheck Windows Subsystem for Linux in Windows Features
Reboot
Turn the feature back on
Re-apply the WSL2 update
Reboot
Source: https://github.com/docker/for-win/issues/8204#issuecomment-707389365