Hi I an integrating my python code for time series forecasting with tableau using tabpy. While executing the code as calculated field it giving this erro: "User defined script timed out. Timeout is set to 30.0 s.". I have increased timeout in default.config already. Please suggest some sulution.
It looks like the value of TABPY_EVALUATE_TIMEOUT is hard coded somewhere in the python code used for tabpy server.
check in the tabpy\tabpy_server\app\app.py file, if you find out any hard coded value there just change the number to your required value or else check in other python files in the folder for the hard coded value and change it.
Incase you didn't find that path check in the log file of the tabpy, you will get to know that path.
According to the documentation you can set this parameter in your configuration file and when you launch Tabpy from the command line, just specify absolute to your configuration file like this: tabpy --config=absolute/path/to/your/config/file.conf
You can find a configuration file example under the link above. The parameter which you need to set is TABPY_EVALUATE_TIMEOUT, so in your case configuration file could look like this(if you want to extend timeout time to 2 minutes, for example):
[TabPy]
TABPY_EVALUATE_TIMEOUT = 120
All other parameters will be taken from default configuration file.
Related
I am attempting to send a file from IFS to an outq on our AS/400 system. Whenever I do, I get exactly what I send, as well as a line of "#" symbols of varying lengths appended to the end.
Here's the command I'm using:
qsh cmd('cat -c /path/test.txt | Rfile -wbQ -c "ovrprtf file(qprint)
outq(*LIBL/ABCD) devtype(*USERASCII) rplunprt(*no) splfname(test) hold(*no)"
qprint')
The contents of test.txt is just Hello World!
The output I get when I send the command is
Hello World!####################################################################
I have not found any posts online about a similar problem, and have tried changing values and looking for additional switches to get it to work. Nothing I'm doing seems to fix the issue.
Is there a command or switch that I am missing, or is something I have in there already causing this?
EDIT:
I found this documentation which is the first time I've seen this issue mentioned, but it's not very helpful:
“Messages for a Take Action command might consist of a long string of "at" symbols (#) in a pop-up message. (The Reflex automation Take Action command, which is configured in situations, does not have this problem.) A resolution for this problem is under construction. This problem might be resolved by the time of the product release. If you see this problem, contact IBM Software Support.”
The only differences are: 1) this is not a pop-up message, it's printed. 2) I don't believe we use Tivoli Monitoring, although I could be wrong.
Assuming we do use Tivoli Monitoring, what would the solution be? There's no additional documentation past that, and I am not a system administrator, so I can't really make the call to IBM Software Support myself. And assuming we DON'T use it, what else could cause this issue?
I get different results, yet similar. I created a test.txt with Windows Explorer, put in Hello, world!, saved it and tried the script. I got gibberish for the 'Hello, world!' and then the line of # symbols.
My system is 7.3 TR5, CCSID 37 (US English) and my IFS file is CCSID 1252 (Windows English). Results did not change if I used a stream file of CCSID 819 (US ASCII).
I didn't have any luck modifying Rfile switches.
I found that removing devtype(*userascii) produced printed output in plain English without the # symbols. Do you really need *USERASCII? I would think that would be more for a pre-formatted 'print-ready' file like Postscript or the like.
EDIT: some more things to try
I don't understand why *USERASCII is adding those # symbols; it looks like a translation issue.
I tried this and still got the extra ###... You might have to play with the TOCCSID() parameter. Although a failure, it did give me an idea: what if those # symbols are EBCDIC spaces being sent as-is to the *USERASCII print stream? All we'd need is a way to send only the number of bytes in the stream file, without any padding.
CRTPF FILE(QTEMP/PRTSTMF) RCDLEN(132)
CPY OBJ('/path/test.txt') TOOBJ('/qsys.lib/qtemp.lib/prtstmf.file/prtstmf.mbr') replace(*yes)
ovrprtf file(qprint) outq(*LIBL/prt3812) devtype(*USERASCII) rplunprt(*no) splfname(test) hold(*no)
cpyf prtstmf qprint
The data in QTEMP/PRTSTMF is in ASCII; DSPPFM shows that much. It also shows a bunch of spaces: after all, it is a fixed length file. My next step was to write an RPG program to read the stream file and print it, but Scott Klement already did that: http://www.scottklement.com/PrtStmf.zip
This works on my system:
ovrprtf file(qsysprt) outq(*LIBL/abcd) devtype(*USERASCII) rplunprt(*no) splfname(test) hold(*no)
prtstmf stmf('/path/test.txt') outq(abcd)
Since our test agents are slow some times- i am trying to add some additional time outs for some commands
I did it like using time out value on command as shown below.But its not respecting the value given
My understanding is cypress will wait for "10000" MS for getting the #Addstory element?
Can any one advice is this is the correct way please?
Thank you so much
cy.get('#addstory > .ng-scope').click({ timeout: 10000 })
In cypress.json file, increase the timeout to 10 seconds or what ever timeout you want like this: "defaultCommandTimeout": 10000 and save the file. Now close the app and open it again. Navigate to Settings > Configuration you should be able to see the new value set for defaultCommandTimeout.
I issue was i was adding time out on click not for getting the element when i changed like below -All good waiting for add story to be visible as i expected before click
cy.get('#addstory > .ng-scope',{ timeout: 10000 }).click()
I want all my jenkins logs of my current build in groovy
env.logs = currentBuild.rawBuild.getLog(1000).join('\n')
This works, but the problem here is I have to specify the amount of lines.
When I use:
env.logs = currentBuild.rawBuild.getLog().join('\n')
env.logs is empty. What is the right command to get all the logs without specifying the amount of lines. Is this possible?
currentBuild.rawBuild.log seems to work but is deprecated?
You can use the getLog method with a max value getLog(Integer.MAX_VALUE)
This is working for me - it reads the actual log file instead of using the API:
logFileContent = new File("${JENKINS_HOME}/jobs/${JOB_NAME}/builds/${BUILD_NUMBER}/log").collect {it}
I'm working on a Jenkins plugin where we make a call out to a remote service using Spring's RestTemplate. To configure the timeout values, I'm setting up some fields in the global configuration using the global.jelly file for Jenkins plugins using a number field as shown here:
<f:entry title="Read Timeout" field="readTimeout" description="Read timeout in ms.">
<f:number default="3000"/>
</f:entry>
Now, this works to save the values and retrieve the values no problem, so it looks like everything is setup correctly for my BuildStepDescriptor. However, when I first install the update to a Jenkins instance, instead of getting 3000 in the field by default as I would expect, instead I am getting 0. This is the same for all the fields that I'm using.
Given that the Jelly tag reference library says this attribute should be the default value, why do I keep seeing 0 when I first install the plugin?
Is there some more Java code that needs to be added to my plugin to tie the default in Jelly back to the global configuration?
I would think that when Jenkins starts, it goes to get the plugin configuration XML and fails to find a value and sets it to a default of 0.
I have got round this in the past by setting a default in the descriptor (in groovy) then this value will be saved into the global config the first time in and also be available if the user never visits the config page.
#Extension
static class DescriptorImpl extends AxisDescriptor {
final String displayName = 'Selenium Capability Axis'
String server = 'http://localhost:4444'
Boolean sauceLabs = false
String sauceLabsName
Secret sauceLabsPwd
String sauceLabsAPIURL =
'http://saucelabs.com/rest/v1/info/platforms/webdriver'
String sauceLabsURL = 'http://ondemand.saucelabs.com:80'
from here
For some specific purpose, I need to install some fonts on the instances. It comes as no surprise when I choose StartUp Task to accomplish that goal. I've configured the Service Definitions as below:
<Startup>
<Task commandLine="Fonts\InstallFonts.vbs" executionContext="elevated" taskType="simple" />
</Startup>
Nothing special here. Click and run, it failed. However, if I changed the commandLine into a cmd file including just nonsense, namely "echo test", the instance would run without ado. So there must be some issue with my scripting:
Const FONTS = &H14&
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(CreateObject("Scripting.FileSystemObject").GetAbsolutePathName("."))
Set fontFolder = objShell.Namespace(FONTS)
Set rxTTF = New RegExp
rxTTF.IgnoreCase = True
rxTTF.Pattern = "\.ttf$"
Set fso = CreateObject("Scripting.FileSystemObject")
FOR EACH FontFile IN objFolder.Items()
IF rxTTF.Test(FontFile.Path) THEN
IF NOT fso.FileExists(fontFolder.Self.Path+"\\"+FontFile.Name) THEN
FontFile.InvokeVerb("Install")
END IF
END IF
NEXT
The script should come with no error because I've tested it either locally or on Azure via RDP.
Weirdly, when I put it in the startup, the role just won't start. The instance just keeps recycling and at last says "I'm unhealthy". Even if I deprecate the vbs into just one line of code - the first line Const FONTS = &H14&, it just won't start. Even if I wrap the invocation of the vbs into a cmd file, namely to put something like "cscript /B file.vbs", it won't run either.
So I'm concluding that there must be some issue regarding the communication between the script and the Windows Azure monitor. I'm not sure but I think the monitor might take the running script as a failed task. Besides, I'm wondering if there is any timeout for the startup task, which should be the problem though, because the script can guarantee that no UI interaction block the process.
Any idea would be greatly appreciated.
I am sure you must have but just for the sake of confirmation, have you checked that the InstallFonts.vbs file is exported with the package? I mean is the "Copy To Output Directory" is set to "Copy Always/Copy if newer"?
This is pretty much possible that it is not able to locate your file.
You need to write a cmd file as a start up task. In your cmd file, you can call the vbs file using the command line tool cscript.
Azure start up can compile only command line tools.
Oh god, I finally solved the problem.
Although the compiler does quite a good job usually, it allows to use subfolder as a source of command, I mean something like "Subfolder\command.cmd", which will not work always. I've seen examples in which people put whatever we do in cmd in commandLine property, such as "copy fileA fileB" and it really works. But as for vbs, you need to be cautious. Until now I still don't know what's under the cover, but there should be some problem with the path. And the solution is definitely simple, instead of doing the subfolder work for tidiness, just leave the command file in the root folder like most people do:
<Startup>
<Task commandLine="InstallFonts.vbs" executionContext="elevated" taskType="simple" />
</Startup>
And thank you all the same, Kunal. :)