I have a Visual Studio Solution that I've been working with. This solution has a console app in it. Notably, I've been running Windows within a Bootcamp partition on my MacBook Pro.
A developer on my team wanted to use Docker. I agreed, thinking it wouldn't impact the console app itself. However, I can no longer compile the console app since Docker has been added. When I attempt to compile the solution, I see:
Visual Studio Container Tools requires Docker CE for Windows. To get it, see https://go.microsoft.com/fwlink/?linkid=847268
For more info, please see: http://aka.ms/DockerToolsTroubleshooting
Here's the problem, since I'm running Windows via a Bootcamp Partition, I can't run Docker (from my understanding). Is there a way to disable Docker just for my myself? If so, how? I don't want to undo what the other dev has done. However, I can't setup a brand new environment at this time.
My need is similar: disable Docker completely, but without uninstalling it.
So, this may help. But
My use case is different: I want to as nimbly as possible switch between VMWare and Docker.
My environment is different: I have a non-macbook PC and I'm only running Windows.
So YMMV.
This worked for my use case:
In the services control panel, disable the Docker for Windows Service or set it to manual start.
On the task manager startup tab, disable Docker for Windows.
For my use case only, there additional changes for VMWare. Disable DeviceGuard and CredentialsGuard per article at https://learn.microsoft.com/en-us/windows/security/identity-protection/credential-guard/credential-guard-manage.
Hope this helps for you.
Related
it is possible to install docker desktop on virtual machine (vmware) windows 10 on a VMWARE ESXI ?
i am trying to install desktop docker on my vmware virtual machine with windows 10.
I installed the wsl2 support but at the end of the installation docker crashes with the following error:
Docker desktop 4.0.1
Installation failed
Component CommunityIstaller.ServiceAction failed to start services: The service did not respond to the start or control request in a timely fashion
I have done several tests but I cannot avoid this crash in any way.
The Operating System is a build that meets the minimum requirements to install Docker.
However, I noticed that Hyper-V is not enabled in the windows features. can this be a problem?
I think maybe it's a grafted virtualization problem because I install docker inside a VM. it's possible?
How can I solve? (or do you think that i will fix this problem with linux virtual machines?)
Does your host machine have all the advanced flags for 'efficient' nested virtualization? I wouldnt really recommend a third layer install of docker (as the final container is then virtual , on paravirtual (wsl2) on virtual (HyperV), on virtual (Esxi). I heavily assume the performance will be terrible.
And yes: You need Hyper-V, it's a requirement still. I assume, as you say its not available on the features, youre running a windows 10 home? Then sorry, you need at least Windows 10 Pro for Hyper-V support.
But as youre running a ESXI host, go the better performing way: Install any Linux distro of your choise, install docker there - if you wanna use it for Visual Studio etc. , you can still remotely debug etc. - and its performing better than on an a even deeper nested virtualized windows-wsl2. And btw: if its because of GUI, simply install the free Visual Studio Code, it offers Docker Tools which offer you many configiruation and monitoring options in a GUI , without enforcing you to do such a super deep nesting.
Yes, it's definitely possible. I'd probably check the hardware assisted virtualization (if available) is enabled. If so, you might want to make sure you've satisfied the rest of the requirements for the WSL2 backend deployment. If you're still having issues, try an older version and try upgrading from there.
I have a bunch of containers running .Net Framework Apps on Windows Containers. Apps work great, containers work perfectly. I need to debug some code on one of the containers using VS2019 and according to this article it should be easy https://learn.microsoft.com/en-us/visualstudio/debugger/attach-to-process-running-in-docker-container?view=vs-2019
Unfortunately, I only see "Docker (Linux Container)". I do not see an option for "Docker (Windows Container)" and I don't see any additional steps needed in the articles or any other to enable this.
I can confirm that my Docker Desktop is switched to Windows Container and everything is working perfectly I just don't see this option but seems like I should be able to. Has anyone come across this and found a solution? I saw some stuff for installing a remote debugger on the container but again the article does not say this is a prerequisite. Any help will be much appreciated.
Thanks,
To anyone facing the same issue, the answer is to upgrade your visual studio 2019 instance to the latest. I noticed I was on 16.4.x. I upgraded to 16.8.3 and the options all appeared and worked as expected. Apparently the options for Windows containers and the new WSL 2 based engine are only available in 16.5.x and above. Hope this helps someone out.
I have a problem with my divio app.
setting up my divio application for the first time, I managed to get a check mark for "docker client", "docker compose", "docker machine" and "virtual box" by installing docker toolbox, however, when trying to install "docker server connection" it seems that Divio app gets stuck at "installing" and nothing actually happens. I left it for hours and nothing happened. What am I getting wrong here? Is it permission issues or something else?
P.S. I'm using windows 7 ultimate 64-bit. Any help is highly appreciated.
Docker, and therefore the Divio local development environment, will run natively on Windows 10 Professional and Enterprise.
On other versions (Windows 10 Home, and earlier versions) it cannot run natively and must be run in a virtual machine.
This is why your installation requires Docker Toolbox and VirtualBox. The best way to get past this is to upgrade to Windows 10 Professional, but that's not an option for everyone.
If the Divio app detects that your system does not support Docker natively, it will do its best to install Docker Toolbox and VirtualBox, but this set-up is more complex and fragile, and as you have seen, setting it up can sometimes fail.
Try these steps:
Quit the Divio application.
Make sure that VirtualBox on your system is fully up-to-date with the latest version. You can download and install it from the VirtualBox website.
Make sure that Docker Toolbox is fully up-to-date with the latest version. You can download and install it from the Docker Toolbox.
Make sure that both applications are able to run if you launch them manually.
Ensure that you are running as an administrator user.
Check that virtualisation is enabled in your PC's BIOS.
Finally, try again with the Divio app.
I have a private server that I've been slowly setting up for personal projects, but I've run into a bit of a roadblock. My server is running Arch linux [I like bleeding edge and minimalistic installs in situations like this] and I have Jenkins running on it so that I can have it automatically build projects. I have a project that I've been working on that is currently targeting the Win32/64 platform using MSVC, but I can't seem to find any info anywhere about setting up a job on Jenkins for this situation. I was hoping that I could maybe setup a Docker instance that would be able to provide the MSVC toolchain, especially since Visual Studio Code is available for Linux, and that I could use that as part of my Jenkins setup to generate Win binaries for me to test on my main machine. I mention this because naturally, Visual Studio is not a command line utility, and currently my server is a pure headless setup that only provides cli interaction, so if possible, I would like to avoid directly adding GUI packages to the server, but if it is the only way, I'd be willing to do so. Is there really no way to achieve what I'm going for with this?
Sorry if this lacks important details or is formatted poorly, this is my first time asking a question here as it's very rare for me to not be able to find the info I'm looking for in an already existing question.
After research, this is not currently possible as it stems from a misunderstanding of exactly what docker provides. Docker simply uses the underlying OS to provide everything and does not provide any virtualization of foreign OSs. Without a version of the MSVC toolchain that can run on linux, or possibly the use of WINE, there is not a way to achieve this short of a VM. Since WINE is not perfect, the most reliable solution as it appears to me is the VM, but YMMV. The other advantage to using a VM is that I can keep the server headless.
I can't answer this question completely, but this topic is interesting to me too.
Note: Visual Studio Code is open-source, but that's an Electron-based editor. Visual Studio IDE and MSVC are proprietary Windows-only apps.
The website https://blog.sixeyed.com/how-to-dockerize-windows-applications/ suggests it's possible to dockerize Windows apps, including Visual Studio.
Docker images for Windows apps need to be based on microsoft/nanoserver or microsoft/windowsservercore, or on another image based on one of those.
Once you get that working, I'd use Visual Studio command-line builds, like devenv /build file.sln [optionally /project file.vcxproj ]. (https://learn.microsoft.com/en-us/visualstudio/ide/reference/devenv-command-line-switches?view=vs-2017 ).
Note that the VS2017 installer does not function on Wine. I recently filed a bug for this (https://bugs.winehq.org/show_bug.cgi?id=45749 followed by https://bugs.winehq.org/show_bug.cgi?id=45757 ).
I personally use Appveyor for auto-building MSVC apps. Appveyor is a Windows-based centralized cloud service, not a self-hosted CI system.
Everytime I run any rails command on my windows vista dev box there is always something like a 30 second delay before the command does anything. I don't have the firewall enabled and the virus protection is disabled. Any thoughts on what could be causing this?
Thanks
I can't comment on this specific issue, but I can say I had nothing but problems trying to run Rails on Windows in the past. That said, after trying Ubuntu and MacOs, I still prefer to use Windows as my primary UI. My solution is to run Ubuntu Server on a VM, and use a Samba file share to access dev files, with putty as my primary console interface. The linux command line is far more powerful, and is where the Rails ecosystem is really geared to be running.
VirtualBox: http://virtualbox.com
Ubuntu: http://ubuntu.com
Samba: http://www.samba.org/
Putty: http://www.chiark.greenend.org.uk/~sgtatham/putty/
With these tools, you can run your Rails stack in a nice linux server environment, and still enjoy the utility and functionality of the Windows GUI. (Although I'd recommend you move from Vista to 7)