I just wanted to know if there is or will be a standalone installer for fsi.exe to run on machines (Windows) that are not connected to the internet?
I have managed to get fsi working by downloading the nuget package, unzipping and then manually adding the "tools" folder to the PATH environment variable.
This seems to work because I can get into the repl, but I was wondering if there is a better way to do this.
This is a client server that we access over a tightly controlled VPN and it is not an option to do a full Visual Studio installation.
Related
I have a private server that I've been slowly setting up for personal projects, but I've run into a bit of a roadblock. My server is running Arch linux [I like bleeding edge and minimalistic installs in situations like this] and I have Jenkins running on it so that I can have it automatically build projects. I have a project that I've been working on that is currently targeting the Win32/64 platform using MSVC, but I can't seem to find any info anywhere about setting up a job on Jenkins for this situation. I was hoping that I could maybe setup a Docker instance that would be able to provide the MSVC toolchain, especially since Visual Studio Code is available for Linux, and that I could use that as part of my Jenkins setup to generate Win binaries for me to test on my main machine. I mention this because naturally, Visual Studio is not a command line utility, and currently my server is a pure headless setup that only provides cli interaction, so if possible, I would like to avoid directly adding GUI packages to the server, but if it is the only way, I'd be willing to do so. Is there really no way to achieve what I'm going for with this?
Sorry if this lacks important details or is formatted poorly, this is my first time asking a question here as it's very rare for me to not be able to find the info I'm looking for in an already existing question.
After research, this is not currently possible as it stems from a misunderstanding of exactly what docker provides. Docker simply uses the underlying OS to provide everything and does not provide any virtualization of foreign OSs. Without a version of the MSVC toolchain that can run on linux, or possibly the use of WINE, there is not a way to achieve this short of a VM. Since WINE is not perfect, the most reliable solution as it appears to me is the VM, but YMMV. The other advantage to using a VM is that I can keep the server headless.
I can't answer this question completely, but this topic is interesting to me too.
Note: Visual Studio Code is open-source, but that's an Electron-based editor. Visual Studio IDE and MSVC are proprietary Windows-only apps.
The website https://blog.sixeyed.com/how-to-dockerize-windows-applications/ suggests it's possible to dockerize Windows apps, including Visual Studio.
Docker images for Windows apps need to be based on microsoft/nanoserver or microsoft/windowsservercore, or on another image based on one of those.
Once you get that working, I'd use Visual Studio command-line builds, like devenv /build file.sln [optionally /project file.vcxproj ]. (https://learn.microsoft.com/en-us/visualstudio/ide/reference/devenv-command-line-switches?view=vs-2017 ).
Note that the VS2017 installer does not function on Wine. I recently filed a bug for this (https://bugs.winehq.org/show_bug.cgi?id=45749 followed by https://bugs.winehq.org/show_bug.cgi?id=45757 ).
I personally use Appveyor for auto-building MSVC apps. Appveyor is a Windows-based centralized cloud service, not a self-hosted CI system.
I am working on .Net core Microservices. I installed Docker Toolbox containing docker cli and kitematics. After that i created a simple (.Net core) web api project in visual studio 2017 and also enable docker support.
But when i hit F5 to run the program it shows following error and doesn't run.
Visual Studio Container Tools requires Docker to be running before building, debugging or running a containerized project.
Please review the attached image.
Visual studio error on running the project
If i build and run the project using docker cli, it's working. The problem is with visual studio 2017.
In my case I had an erroneous reference in Dependencies > Packages to Microsoft.VisualStudio.Azure.Containers.Tools.Targets
Removing the reference fixed the error.
The problem occurs because Visual studio container is unable to connect to docker for windows and solution for this is to open the visual studio 2017 from Docker CLI using following command.
/c/Program\ Files\ \(x86\)/Microsoft\ Visual\ Studio/2017/Community/Common7/IDE/devenv.exe C:\\PATH\\TO\\MY\\SOLUTION.sln
Here:
C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\Common7\IDE\devenv.exe
is the location of my devenv.exe file and 2nd parameter
C:\\PATH\\TO\\MY\\SOLUTION.sln
shows the path of solution file.
For further details of this solution, click Here.
In my case, this issue was caused by a disabled BIOS Virtualization. To enable Virtualization, see here. In order to check whether Virtualization is already enabled, start Task Manager > Performance > find Virtualization. If you are hosting your docker container application in full feature IIS, make sure you start Visual Studio as an Administrator.
I was getting the same error when I was trying to rebuild my solution after changing my .Net Core 2.0 application to .Net Core 2.2. As I reset my windows, there was no docker installed on my machine. To fix this all I had to do is to install the docker for desktop as I wanted to containerize my applications.
Once you install the Docker, it will ask you to enable Hyper-V and Container features. By clicking the Ok button in the pop up as preceding, will enable this features for you.
Your computer will be restarted automatically and once it is done, you should be able to see that the Virtualization is enabled in the task bar.
After this I was not facing this error.
Check shared folders inside the default virtual machine setting in Virtual box to make sure you shared the disk where you project located. By default shared only C:\Users. So alternatively you can move your project somewhere inside C:\Users folder (for example in Desktop folder)
I was facing the same issue and I resolved it by switching to IIS Express instead of Docker in debug menue on visual studio 2017
I am very new with electron application. I need some help with election installation.
I have an Electron desktop application and a windows service.
I can start and stop my pre installed services by using sudo-prompt package.
I am creating windows installer by using electron-winstaller package.
But I want to bundle my windows service along with my electron application. My requirement is when I install my electron package then it should install my service also, when I uninstall my package then that service should be uninstalled.
Please help me out. Any clue, Any suggestions will be appreciated.
If you think this should be achieved with something else then please do suggest me.
Electron's windows installer packager strikes me a specific case tool that would likely hit limitations in scenarios like this. I would use a general case tool instead such as the Free and Open Source Windows Installer XML Toolset aka WiX. I would also use with that another FOSS application called Industrial Strength Windows Installer XML aka IsWiX.
WiX allows you to describe and build MSI databases using an XML/XSD domain specific language. It supports MSBuild for easy integration with your CI/CD pipeline. IsWiX* is a set of project templates and graphical designers that provide an opinionated project structuring (scaffolding) and greatly speeds up the learning curve and implementation. For example, this installer you describe could be done without writing a single line of XML.
For more information see: https://github.com/iswix-llc/iswix-tutorials
The desktop-application and windows-service tutorials should** show you everything you need to know to author this installer. Basically follow the desktop-application all the way through and then skip to the final portion of the windows-service tutorial where you define the windows service.
I'm the maintainer of IsWiX
** This assumes your service exe is a proper Windows service that interfaces with the windows service control manager. If it's really just a console app that runs as a service you will need to include a program such as srvany.exe. This will require one line of hand crafted XML to extended the service definition in the registry with the proper command line value to be passed to your exe. An example can be found here: Wix installer to replace INSTSRV and SRVANY for user defined service installation
this is my first post I am having some trouble with an app, in Visual Studio I can run it on Debug without any issue and everything works correctly, but when I deploy it using IIS I can access any page except of the ones where there is an interaction with an access database. If I search through virtual directory I can download the file without an issue.
Do you have any recommendation?
Are you running x32 or x64 iis? (Usually it x64).
Of course on your desktop, then Visual Studio defaults to x32, and that would explain why the Access database engine (ACE) works. You likely should force your project to x32 or x64 (and then ensure that you have a x64 bit version of the ACE (Access) istalled on your developer machie. You then want to ensure that you launching the x64 bit version of IIS.
You don’t need Access installed on your server, but you will need the ACE database engine – and the most easy way to ensure that data engine is installed is simply installing the Access runtime on that server.
Give that the standard ACE database engine download is x32, then I would look into this issue. You could (should) be able to resolve the issue by installing a x64 bit Access runtime on that server – this would also suggest a possible update to your connection strings. And I would check/test the connection string you are using once you resolve the x64 bit version of Access. The path name in your connection string will ALWAYS be a absolute path (not a relative one).
I'm experimenting with the new Windows Subsystem for Linux as a way to develop Rails applications in Windows. I have WSL installed and I have Ruby in it but how do I use that Ruby from a Windows GUI application, specifically, RubyMine:
This is so I can easily start rails, run tests, etc.
If anyone is wondering how this can be done at this time with the latest version of Ruby, there is a WSL connector for the remote repo of ruby.
[Update 2020-10-30]
Updating the response below as a lot has changed and improved since my initial reply in 2017 😜
The awesome team at JetBrains have enabled RubyMine to talk to WSL via SSH and to use the "remote" Ruby interpreter, and even debug Ruby code running in WSL! :)
Also, in Windows 10 1903, WSL provides the ability to access Linux distros' filesystems from Windows via the \\wsl$\ pseudo-UNC path.
In Windows 10 2004, WSL added a Linux icon to File Explorer making it easier to discover this pseudo-UNC path.
So, in Windows 10 >= 1903, Windows apps, editors, IDEs, etc. can also access files stored in, for example, \\wsl$\Ubuntu\...!
👉 Notes:
Accessing files in Linux via \\wsl$\... will be slower than accessing files locally because file IO requests have to be marshalled back and forth via a 9P fileserver. If you intend on accessing files intensively, we recommend storing the files in the filesystem closest to whatever you'll be using to access those files most intensively.
Thus ... while you can access files directly via the pseudo-path, using WSL integrations built-in to tools like RubyMine, VSCode, Visual Studio, etc. should be preferred if available.