I have been using open-EDX (LMS) - (Juniper Version) Devstack Installation for Ubuntu 18.04 (which uses Docker Containers). I recently git cloned edx-proctoring into the place where I am using Devstack such that my folder structure would be like:
openEDX/credentials (or) devstack (or) edx-platform (or) edx-proctoring ....etc......
Now, I need to Install the cloned folder into my pre-existing devstack development. I am using these instructions:
https://github.com/edx/edx-proctoring/blob/master/docs/developing.rst
I am stuck in the Sub-section: Install the proctoring package into edx-platform in the container, for both LMS and Studio
Under Section:
How do I develop on edx-proctoring?
I provided the correct path for the git-cloned folder inside private.txt file.
Now, after entering into make lms-shell, when I am trying to call paver install_prereqs
it is giving me this error:
ERROR: /folder-path/ is not a valid editable requirement. It should either be a path to a local project or a VCS URL (beginning with svn+, git+, hg+, or bzr+).
No matter what path I give (like via root folder, via absolute path) the same error is repeating.
I am out of solutions. I would really appreciate suggestions and help.
Thank You.
I need to convert my iOS project to 64-bit friendly (to get rid of compiler warnings, as in this question. The solution apparently is to run ConvertCocoa64.
I've managed to locate ConvertCocoa64 (which is no longer included in /Developer/Extras/64BitConversion/ConvertCocoa64) as the Apple docs suggest, but here (search for Auxiliary Tools)
So I've download the script. But my question is, how do I run this on my project? Please assume a total newbie level of knowledge here when it comes to the terminal and running scripts. Do I drop the script inside my project folder and just double click it? Or do I access it from the terminal? The docs say run this command:
/Developer/Extras/64BitConversion/ConvertCocoa64 `find . -name '*.[hm]' | xargs`
But since that folder doesn't exist, where do I run it?. I tried dropping the script in the Developer folder, but when I type ConvertCocoa64 it says command not found.
Find where the command is located now. You'll want to run it in the terminal using the full path to the command, as in your example, just with the real path.
A good way to get the full path is to locate the command in the Finder and drag it to an open terminal window - this also "escapes" any spaces in the path for you. The easiest way to hit all your files as arguments to the command is to cd (change directory) to your project first (in the terminal).
This should get you set up to follow the directions you have.
If I'm not mistaking, to run script, you should place dot . before command. Doesn't really matters, where script is situated as long, as it doesn't rely on it heavily
> cd ~/path/to/script/dir/
> ./ConvertCocoa64 ...
error while loading shared libraries: libopencv_core.so.3.0: cannot open shared object file: No such file or directory.
I am using eclipse c/c++ ide on ubuntu 14.04. Tried everything which I got from google
You are trying to run in Eclipse so the solution provided (The export part) in openCV program compile error "libopencv_core.so.2.4: cannot open shared object file: No such file or directory" in ubuntu 12.04 May not work.
I suppose you have installed open cv following the instructions provided in open cv documentation. If so, you can get rid of this problem by adding the following environment variables to the eclipse runtime.
Name - LD_LIBRARY_PATH
Value - $LD_LIBRARY_PATH:/usr/local/lib
Steps
Click on Run As -> Run Configurations
On the window on the right hand side you see the Environment tab.
Here click on New, you'll see a New Environment Variable pop up.
Here, for Name enter LD_LIBRARY_PATH, for Value enter $LD_LIBRARY_PATH:/usr/local/lib. click ok and Apply
Now run again, you shouldn't see the issue.
I had the same problem too. Upgrading to the latest Eclipse version solved it.
I’ve added a GRAILS_HOME environment variable, which points to the folder in which I extracted the Grails distribution zip, and I’ve added %GRAILS_HOME%\bin to my path. Yet after I open a new command prompt, the “grails” command is still not found. Does anyone have any clue as to why this is happening?
I’m running Grails 2.2 on Windows 7.
I have the same problem on Windows 7 64 bit and Grails version 2.*
By removing local neither maven repository nor installed plugins repository doesn't help.
I found - just set properties of %GRAILS_HOME%/bin/grails.bat and startGrails.bat as Run in compatibility mode: Windows XP (Service Pack 3).
To do that You need to have local PC Administrators rights.
/igors
have you create JAVA_HOME in there?
Maybe you are experiencing [STS-2530] Problem deploying Grails App if workspace path has a space. Jira shows the issue as resolved but it would not hurt to check that you do not have a space in your workspace path as it my trip up grails.
Do the following.
Go to your command prompt, execute the Path command. If everything has been set right your paths should show up as complete paths starting with C:... If the paths show up with the % sign that means your paths need to be set correctly. I did noticed that in your example you have used the forward slash - I am assuming that is a typo, because that will be a problem.
Another way to trouble shoot the issue is CD to the location C:\Grails\bin, execute the command grails.bat, if it executes you are in a good place that means you have to tweak your paths - following this path might give you a clue about other issues....
You might want to check the bin folder of your grails installation. The grails.bat file could be missing. I had this problem today and solved it by downloading the zip file again.
I'm ask/answering this question because it hung me up & it's likely someone else will have the same problem.
Install of RabbitMQ x64 v2.8.6 on Windows Server 2008 x64.
After Erlang install using default install location to C:\Program Files\erl5.9.2, I'm attempting to start the server via running the rabbitmq-service.bat. Fail:
Please either set ERLANG_HOME to point to your Erlang installation
or place the RabbitMQ server distribution in the Erlang lib folder.
Problem is the .bat file does not have the correct subpath. with 5.9.2 (R15B02) version of erlang. My ERLANG_HOME directory is set correctly, but the script does not use it correctly for this version of Erlang, which, it appears to this Erlang noob to have a new subdirectory called "erts-5.9.2" which is causing the problems. Maybe someone intimate with these scripts can describe how to make this work correctly without the hack workaround I'm about to describe?
1- Set environment variable:
Variable name : ERLANG_HOME
Variable value: C:\Program Files (x86)\erl6.4
note: don't include bin on above step.
2- Add %ERLANG_HOME%\bin to the PATH environmental variable:
Variable name : PATH
Variable value: %ERLANG_HOME%\bin
This works well.
There are several RabbitMQ control .bat files on windows. Every one you use needs to get changed to reflect the Erlang path correctly. In this example, I'm editing the rabbitmq-server.bat because it's one of the easier ones... any of the .bat files you want to run will need this hack to get them to work, with the rabbitmq_service.bat file being the most involved to adjust.
editing that rabbitmq_server.bat file, you can see on about line 48 or so there's a check to see if the erl.exe is found, but the path isn't correct:
if not exist "!ERLANG_HOME!\bin\erl.exe" (
that path does not match the file structure for the 5.9.2 version of Erlang. I fixed this by simply removing this path check from about line 48 to 58, then, where the .bat actually makes a call to the erl.exe on about line 129 which reads:
"!ERLANG_HOME!\bin\erl.exe"
I simply hardcoded the path to my erl.exe:
"C:\Program Files\erl5.9.2\erts-5.9.2\bin\erl.exe"
With the pathing correct, the rabbitmq .bat files will run.
I had the similar issue, modifying ERLANG_HOME in .bat files did not work. Then I tried echo %ERLANG_HOME% in command prompt, that did not print the environment variable value(I could see that ERLANG_HOME environment variable has been created under advance system settings), that lead me to believe that I need to restart server for 64 bit installation of Erlang. After rebooting server, It worked like a charm. I hope this helps someone.
Just to share an up-to-date answer as of 2019: On Windows Server 2019, after setting up the environment variable, a restart is required to solve the problem.
I got into same kind of problem.
I solved it by doing three changes as given below.
Update Path variable "ERLANG_HOME" : "C:\Program Files\erl8.0" in Environment Variables.
Upadte "Path" variable "Path" : ";%ERLANG_HOME%\bin;"
Give urself FULL CONTROL permissions over "Program Files" in C drive.
It worked for me in this way.
This problem still occurs in Erlang 18.3 (erl7.3) and RabbitMQ 3.6.9 on Windows when upgrading from any older version of RabbitMQ to version 3.6.9. The solution as already stated here is to manually set ERLANG_HOME with 'setx -m ERLANG_HOME "C:\Program Files\erl7.3"' before starting the service.
What happens is that the RabbitMQ 3.6.9 installer removes the environment variable ERLANG_HOME from the system while removing the older version of RabbitMQ. Then, when it proceeds to the installation step, it does not put back the ERLANG_HOME variable. Then, the batch files that start up RabbitMQ cannot find Erlang. They try to find Erlang's home directory using "where.exe" but it always fails after an upgrade.
RabbitMQ's installer also does not kill all of the Erlang background processes, causing many of its files to be undeletable due to the Windows "file in use" problem. This leaves behind "files in use" in %APPDATA%\RabbitMQ and "C:\Program Files\RabbitMQ." These processes are "erl.exe," "erlsrv.exe," and "epmd.exe." The RabbitMQ installer should taskkill these processes after shutting down the RabbitMQ Windows service.
RabbitMQ is rather clunky on Windows.
Download Erlang or OTP - Only one Version of OTP should be installed
Download RabbitMQ installer
Install both exe file as Administrator
Set class path for Erlang. (Setting classpath is a bit troublesome, so follow these steps)
Set a new path with name ERLANG_HOME and value C:\Program Files\erl-23.1 (do not copy bin folder here)
Edit System "path" and add %ERLANG_HOME%\bin
Go to Start - Open rabbitmq command promt and run
rabbitmq-plugins enable rabbitmq_management
Navigate to localhost:15672
Use guest/guest to login
Interesting that this worked for you. There is record of a two bugs in Erl5.9.2 that cause an incomplete installation where %ERLANG_HOME%\bin is not installed.
Either of
* Installed 64bit erlang on 32bit machine
* "The program can't start because MSVCR100.dll is missing from your computer."
https://groups.google.com/d/topic/erlang-programming/wGtFLzapiQ0/discussion
Try 5.9.1 or any other version. They also mention making the future versions of the installer alert you if it fails.
I just had the same problem mentioned here. I installed otp_win64_R15B02 on a Windows 7 machine and everything worked perfectly, but I used the same installer on a Windows 2008 server and the bin directory was not created. I then uninstalled otp_win64_R15B02 and downloaded the otp_win64_R15B02_with_MSVCR100_installer_fix and the bin directory was created.
I suspect the reason it worked on my Windows 7 system is that I have Visual Studio installed and the required libraries were already available which allowed the otp_win64_R15B02 installer to work correctly.
Oh, and if you're installing Erlang to run RabbitMQ the RabbitMQ install will succeed with the broken installer but installing otp_win64_R15B02_with_MSVCR100_installer_fix after RabbitMQ will not work, just un-install and re-install RabbitMQ to resolve this.
Just give C:\Program Files\erl10.6\ not C:\Program Files\erl10.6\bin\erl.exe in the environment variable. If you open the server.bat file I came to know the issueenter image description here
I think this is encoding issue on windows.I see a correct value but I write echo %ERLANG_HOME% on console the value come with question mark. These steps fix it.
1.go environment variable window
2.edit ERLANG_HOME item
3.copy the value, open notepad and paste there
4.copy again on notepad and paste to edit window
5.apply and exit window
6.close command line tools and reopen
7.run rabbitmq bat file.
I solved it in a quick and dirty way,without naming path variables
I've opened the bat file and replaced every occurrence of
!ERLANG_HOME!\bin\erl.exe
with hard coded path for example might be diffrent path for you because of diffrent version
C:\Program Files\erl10.3\erts-10.3\bin\erl.exe
and replaced
%RABBITMQ_HOME%\escript\rabbitmq-plugins
with
C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.14\escript\rabbitmq-plugins
Even I was this problem. The issue was the environment variable ERLANG_HOME=c:\Program Files\erl9.0 which was never existed.
I cross checked the path. The correct path was c:\Program Files\erl9.3.
After correcting the
ERLANG_HOME=c:\Program Files\erl9.3
the problem solved. So, definitely it is a path issue.
In my case, it should be installed erlang using admin role running
If above solutions doesn't work for you then you can try following
Find another compatible version of erlang for your rabbit mq e.g. for rabbit 3.7.x erlang version 20.3.x to 22.0.x all are compatible .
Right click newly downloaded erlang version and from properties select the option to unblock the file .
Run the erlang with admin persssion .
Re run rabbit mq exe