Related
I am trying to upload a new build to iTunesConnect from xCode, but every time I encounter this issue:
What is the problem? and how can I fix this?
Recently I started facing issues during upload progress and Xcode used to get stuck a lot and would eventually fail with the second error which you are seeing. Having fed up for a while, I switched to use Application Loader in XCode.
Way to use would be, first archive your app, once that is finished, you can spot Export option on the right hand side panel just below Upload to App Store option. After you select Export You will see different options. Select Save for iOS App Deployment. This will create a .ipa file and save it in your desired location.
Now, go to XCode -> Developer Tools -> Application Loader -> Deliver Your App -> Select the .ipa file where you had saved before.
This method has been helping me a lot and failed not even once for quite sometime. Hope it helps you as well.
This happens due to Apple server is not working correctly for now, try to upload it later or 1 day after, it will be uploaded successfully, it happens due to Apple's app server internal problem.
Also you can try to upload it through App Loader. but if apple's server is in trouble then uploaded binary may not shown in iTunesconnect.
It would only work if I used Application Loader, like this:
First, export the application Archive from Xcode's Organizer window (it saves this into a directory on the Desktop).
Then, from Xcode:
Xcode > Open Developer Tool > Application Loader
Like I said in the title, I keep getting the error "This Action Could Not Be Completed. Try Again. (-22421)" when trying to upload my app to iTunes connect. I did it a few weeks ago and it worked fine. Since then I only made a few small text changes, nothing major, and not it won't work.
I looked around and people were saying it could be an issue with Apples servers but its been 4 days now since I've been trying.
I've also noticed when I archive my app I get the error "section "__const_coal" is deprecated" in Xcode 8.2.1. This doesn't show up when I build or run on my phone, but only when I archive. I tried this on stack overflow and tried it but it didn't work and other than that I've found no solutions.
I really need to push this update but I'm completely lost on what to try next.
If anyone can help me fix this I will be forever grateful!
I had the same issue a couple of days ago.
You need to manually update the iTMSTransporter.
To do it just open a terminal and run the following code:
cd ~
mv .itmstransporter/ .old_itmstransporter/
"/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/itms/bin/iTMSTransporter"
It should show something like:
<main> INFO: Transporter is searching for updated software components.
It took about 10 minutes to finish in my case, but I was on a really slow connection.
Tell me if it worked for you too!
You can try following solutions:
Use Application Loader to upload your app, as Xcode organizer can't upload file (rejects IPA) sometimes, without genuine reason and it's frequently occurring issue, with Xcode Organizer, that apple could not resolve permanently.
Solution for error code: 22421
Apple app upload server is not working properly (not in
connection or lost connection during file upload). Just wait and try
again later (may be after a day).
Fluctuation in your network
connection, during file upload.
You may not have added privacy
statements in your info.plist file.
Cocoa Keys: Here, is list of keys (with privacy statements) that you should consider to add in your info.plist file, if you have used that service in your application.
Nowadays, you may also face, this error code: 90186 (with app loader)
Outdated application loader can be reason of this error. Use latest Xcode tool and use application loader from Xcode Tool.
Incorrect/invalid provisioning profile, associated with your build. Ensure, your have used correct provisioning profile (A provisioning
profile with Distribution/Production mode is require. A Development mode provisioning profile won't allow your to upload app on store.)
You can find latest Application Loader Tool from latest Xcode Tool: Xcode -> Open Developer Tool -> Application Loader
I've had an iOS project in fairly stable condition up until Xcode 8's public release. After a bit of confusion with the Migrator, I finally convinced the compiler that I did not want to go Swift 3 yet, and that my code was indeed valid Swift 2.3. Not sure if this at all relates to what the Organizer does in validating my long-awaited archive with some long-overdue fixes for iOS 10, but we'll see...
Anyway, I got Xcode to archive my latest build (which runs fine on my iPhone 5s by the way). I tell Organizer to "Validate..." in preparation for an upload to iTunes Connect. After a good deal of doing its thing, it finally spits this at me:
Been at this for three days now. Application Loader gives me something similar, but not much more helpful:
Following the suggestions in this answer, I find that every single one of my compiled assets read as sRGB, not 16-bit, or P3. Aside: When does an API analysis file get "too large"? I mean, sure I use Apple's APIs a lot, but I can't be alone in that. That's what they're for, right?
I've tried (almost) everything I can think of. I've redone my code signing a dozen different ways, read and recombobulated the build settings wherever I thought could be relevant, and tried every combination of bitcode and symbol inclusion available to me. Just about everything I could come up with short of migrating to Swift 3! Could that really be my solution? It's a rather big jump, and with the time I have, I'd prefer to get this working build out to my users before I'm slammed too hard to shore up the updated codebase.
I can't seem to find anything on "ITunesSoftwareServiceAuthenticationErrorDomain", or this mysterious "error 434". The only reference I've found so far leads to a dead StackOverflow question. Really wish the author hadn't removed it... Wonder if he found his answer?
So my question is as follows: What am I doing wrong to get these errors, and how can I fix them? I'd rather not have to upload without symbols or bitcode, so if that's the workaround, I'd like to know why, so I'm not limiting myself for something dumb.
Cheers!
I had the same problem with Xcode 8.2 while submitting my application:
ITunesSoftwareServiceAuthenticationErrorDomain error 434.
Solution: I switched to different network and it worked for me.
Bump the build number and validate again.
Had the exact same problem. I tried upgrading to Sierra which seemed to update bits of Xcode etc. The new error message was formatted differently, so I could not see the "434"
(With 1 success in 15 attempts (I had to tweak a version number in a string in the app, so didn't choose to upload after that brief moment of joy), i just uploaded the archive anyway, and after 2 hours of processing, it was accepted. I will update when my new app version is live to verify this error can be safely ignored, at least in some cases (e.g. I checked all my graphics' color profiles, etc.).
Do the below steps :-
1. Analyze the project. (From Product Menu)
2. Click on Archive. (From Product Menu)
3. Select the development team for provisioning.
4. From summary window unselect "Include bitcode" and click on Validate button.
Now, It will working fine.
I solved it by uploading my app through Application Loader.
Archive app Export ipa iOS Deployment
Xcode-> open developer tool -> Application loader
I had the same problem while I was trying to submit the app to client's iTunesConnect account. I've signed in with new apple id, downloaded the certificates and provisionin profiles but still got this error:
(ITunesSoftwareServiceAuthenticationErrorDomain error 434.)
How to fix this error?
Try to remove Provisioning Profiles files at ~/Library/MobileDevice/Provisioning Profiles/
Make new Build and Archive the app. Xcode will create new Provisioning Profiles and submit the app to iTunesConnect.
Just to share this.
Quit xcode and re-login as suggested by members does not work for me. I solved it by using "Application Loader"
Steps: 1) change the version and build in your App 2) archive again for new file submission and export file to desktop 3) goto top menu: Open Developer Tool > Application Loader (if you don't have this , search, download and install this plug init) 4) upload the new version archived file. Done
You will find them in iTune Connect. From here process to My Apps > choose the rejected app > change the version and click on the new uploaded archive file, file will be processing..
5) time to resubmit :) cheers
Clicked Valid until it succeeded, 3rd time.
Since there seem to be many solutions to this problem, it may just be an issue not related to anything developers have control over and the "solutions" seem to be "solutions" because after some action was taken, it succeeded. The action I took was the non-action... and it was successful.
Hope this helps, as this is a stressful problem to have when you cannot upload your app and muddling around in Xcode to fix it you might break something else.
I fixed it by upload using Application Loader.
Besides, after upload the app i receive the warning about Privacy - Photo Library Usage Description and Privacy - Camera Usage Description, so that, please make sure you have them in your info
Hope it help!
I had the same problem. In my case it was caused by following. I had a lot of png-files in assets.xcassets and some of them had AdobeRGB Color profile. I changed the profiles to sRGB and xcode validated the archive with no error.
Frankly speaking, when I changed the profiles some other strange errors occured, but they dissapeared by themselves when I tried to re-validate the acrchive several hours later (I did nothing just waited).
If this occurred randomly, try to delete that archive and make sure you have "Generic iOS Device" selected as target when you run Product > Archive again. This solved it for me.
I Got the same issues when i try first time.Next time it Validated successfully. Please check network once before trying second time.
1.Cmd+Shift+K
2.Close Xcode
3.Open Xcode
4.Cmd+B
5.Product->Archive
Just Clear all file in Path ~/Library/MobileDevice/Provisioning Profiles
Go to Xcode Select Provisioning profile again and then it auto-generate again.
So It will be working fine.
In my case it was the following:
my account had been logged out and I had to enter the password again
Xcode v8.0 had to be updated to 9.x to be able to publish to the App Store (as of July 2018)
I fixed this problem by updating Xcode from 8.2 to 9.
Apparently there was a compatibility issue with an SDK used internally. Xcode was not helping with it's error message. I discovered it by using the Application Loader to upload the archive. Application Loader's error message made some sense.
When I try to upload my app to iTC, after validate my app, I begin to submit it .
But there is an Error that said "iTunes Store operation failed
Error Description not available"
When I upload with Application Loader 3.0, same error happened.
I had this error once, too. Then I realized the provisioning profile (Project Targets -> Code Signing) was set to 'Ad-Hoc' profile instead of 'Production' profile. Setting it back to 'Production' did the trick for me.
I've got the Answer,
just upload the ipa with Application Loader 2.9.1, even thought the apple tell you that you should upload the ipa with xcode 5.1.1 or Application Load 3.0.0, but , my solution works well
download Application Loader 2.9.1 or here
The "Error description not available" sub-error message recently became "You are not authorized to use this service".
Removing the Apple ID from XCode preferences and re-adding it fixed the problem.
I'm a Chinese user and meet the same issue, I tried all these and fail:
Regenerate provisioning profile manually or via Xcode.
Use Application Loader (I didn't use 2.9.1 because I think it's a workaround).
Make sure your developer account are the same as iTunes Connect account.
Make sure bundle ID, version and build string in iTunes Connect and Xcode and the same.
Finally I googled and someone said it depends on network, so I opened VPN, and it success! I guess China's special firewall block something?
If you're in China and you've tried all the steps above, you can try to connect a VPN and upload your app. Wish it helps.
As the error says, There is problem in uploading to iTunes Store and not in code signing. Code signing step is prior to uploading to iTunes Store. Once the ipa is created successfully it should be uploaded to iTunes Store.
I faced the problem and without changing anything It successfully uploaded after some time. I guess if we are doing some operation on iTunes Connect, in my case I was removing the build which was set for TestFlight beta testing. After I perform some changes there the issue occurred.
Not the definite solution.
I had this error, and I found that it was because of the version number in my app. It had too many revision levels. You're allowed a maximum of 2. For example, 1.2.3 will pass validation, but 1.2.3.4 will generate the above error in Xcode 6.
I was getting the same error and I tried for like 15-20 times but was out of luck. Then suddenly it stuck with me what if the network is causing this. Since I was on WiFi, I sat next to the router and it worked in the first go itself. Since there is no proper message by the Apple I tried even this and it worked.
Note: If the size of the binary is quiet large then probably good internet connection is required too.
If you are in china use vpn. I fixed by use a vpn! The gfw block the upload api. you can check this.
This is also workaround but you could upload app with Xcode 5.1.1, if you still have one. Generated with Xcode 6.1 *.xcarchive files are available from older Xcode so there is no need to generate *.ipa file.
Just a tip:
Before you start to change and installing things, try to:
set the Provision profile to another one
update your Provision profiles in your account
close Xcode
open Xcode
set the Provision profile to the right one
Archive again
it worked for me!
In my case i user a wrong account with wrong password !
when i relogin, i fixed the problem, holp it will help you!
I have got this error when I tried to validate a build.
It seems just a few minutes ago I could at least validate and got a different error (with version number, I must increase it to 3.4.1 since 3.4.0 is already approved).
But it may be because I had a Pending Developer Release (v 3.4.0) . May be I have to release that version or cancel the binary. Otherwise I cannot validate the current archive.
I shall come back if that is the reason.
In my case what helped was... to wait. I had just deleted a version of the app and while itunes-connect appeared as I could upload another versione it takes some times to the servers to actually acknolegde this.
Waited until I got an email saying "App changed status to Ready for upload"
This always works for me:
Download the correct profile and certificate from member center;
Quit XCode (Not just close the project);
Try archive and validate again.
I usually get over this with a simple workaround.I get this error when I try to upload archive from Xcode 7.So I archive my project with Xcode 7 but I handle upload process from Organizer of Xcode 6.3.Xcode keep organizer content same across different versions of Xcode.
In some cases it might be a notwork/firewall issue. Make sure your the needed ports are open.
Also iTunes Connect must be working. Currently it is showing "iTunes Connect is unavailable until December 29"....
Here is a blog post about it.
On week were no one will be able to update apps. Greate...
We have been trying to submit an app to the iTunes store using Application Loader for three days and keep getting stuck at the "Authenticating with the iTunes store" step.
We have read many forums (including stackoverflow) and tried what was suggested:
making a new provisioning profile
using different or multiple versions of Application Loader
changing proxy settings
rebooting the Mac
uploading at a different time of the day, etc.
We have even left it running overnight and have not had success with getting past this step. Unfortunately, no feedback is given about what the issue may be, and we have not gotten any error messages. We have submitted multiple apps without any difficulty in the past but are completely stuck this time!
How were you able to solve it?
This only started happening to me today (May 2017) and no answers in this thread solved my issue. The resolution for me was from here;
https://forums.developer.apple.com/thread/76803
Open Terminal. Change to home directory,
cd ~
Move the current transporter directory,
mv .itmstransporter/ .old_itmstransporter/
Invoke the following file to let Transporter update itself.
"/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/itms/bin/iTMSTransporter"
Wait till it updates, then open Xcode and attempt upload.
You have to agree to a new sign up in Application Loader. Select "Application Loader" under the "Xcode -> Open Developer Tool" menu (the first menu to the right of the Apple in the menu bar). Once you open Application Loader there will be a prompt to agree to new terms and then to login again into your iTunes account. After this any upload method will work.
Just wait. In a few minutes all will be ok.
Dec 10th 2019, Xcode Version 11.2.1, MacOS X 10.15.1
I was facing exactly same issue yesterday and I thought it might be network issues, at least it looks like so. But this morning I had tried couple different networks and several VPN connections, none of them is working!
The highest voted answer here asks me to reset a cache folder named .itmstransporter under my home dir, the run a program iTMSTransporter under a specific folder, but I can't find both of them.
But soon I figured that it is the cache folder for the people who uses the legacy uploader program: Application Loader, which is deprecated by Apple and can be no longer found in Xcode 11. Then I found that the latest Xcode has located iTMSTransporter here:
/Applications/Xcode.app/Contents/SharedFrameworks/ContentDeliveryServices.framework/itms/bin/iTMSTransporter
And its cache folder is here:
/Users/your_user_name/Library/Caches/com.apple.amp.itmstransporter/
I removed my existed cache folder, and run iTMSTransporter without any parameter, it soon started to output logs and download a bunch of files, and finished in 2 or 3 minutes. Then I tried again to upload my ipa file, it works!!!
CONCLUTION:
Either the old Application Loader, or the latest Xcode, uses a Java program iTMSTransporter to process the ipa file uploading.
To function correctly, iTMSTransporter requires a set of jar files downloaded from Internet and cached in your local folder.
If your cache is somehow broken, or doesn't exist at all, directly invoking iTMSTransporter with functional parameters such as --upload-app in our case, iTMSTransporter DOES NOT WARN YOU, NOR FIX CACHE BY ITSELF, it just gets stuck there, SAYS NOTHING AT ALL! (Whoever wrote this iTMSTransporter, you seriously need to improve your programming sense).
Invoking iTMSTransporter without any parameter fixes the cache.
A functional cache is about 65MB, at Dec 10th 2019 with Xcode Version 11.2.1 (11B500)
I was stuck at "Authenticating with the iTunes Store" today. I had used the same version and build number as a previous submission. After I updated the build number, the upload went fine. I don't know if it's related, or if it was a coincidence.
I had the same issue for months, I just removed hotspot shield and private tunnel applications from my computer and tried to upload my app and everything worked just fine. so I suggest if you have installed any VPN application on your computer, remove the application and then try uploading your app from either application loader or xcode's organizer.
Try answer mentioned in this Reference Link, it really worked for me and for others as well.
Mentioning answer here as well.
Open Terminal and run:
cd ~
mv .itmstransporter/ .old_itmstransporter/
"/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/itms/bin/iTMSTransporter"
iTMSTransporter will then update itself, then you can try uploading in XCode again or via application loader.
There is no magic fix. Itunes is just working bad. Lately is having more and more issues and it takes more and more to update and send an ipa to the store.
I had this issue with AppLoader and Xcode organiser too and after trying multiple times it just went through.
Changing network connection helped.
Turned off wifi on my phone
Enabled 3G
Created HotSpot
Connected my mac to the hotspot and got through the authetication issue
In my case, I hadn't agreed to the newest Developer Agreement. Just run Application Loader once, click on [Accept] to agree, then quit the Application Loader and the Upload to App Store should work fine.
Following worked for me.
Open another instance of Application Loader.
( Select "Application Loader" under the "Xcode -> Open Developer Tool" menu)
"Agree" to the terms.
After completing Step 2. First instance of Application Loader proceeded to the next step and build got submitted.
I have also encounter the same issue. One possible solution is to go to Xcode -> Preferences -> Accounts and from the left menu select on App ID then click on the View Details and tap on the refresh button. while reloading you will get following error
The selected team's agent, 'ADMIN NAME' must agree to the latest
Program License Agreement.
If you will not get above error, Following solution will not work.
It means that you need to login into the developer account using Admin login and accept that latest agreement.
Then you will be able to upload binary on the app store.
The updated answer for Xcode 11.x.x and Transporter application, open terminal:
rm -rf ~/.itmstransporter/
"/Applications/Transporter.app/Contents/itms/bin/iTMSTransporter"
Wait a while
Problem solved!
I'm running MacOS Mojave 10.14.6, Xcode 11.3.1 and Transporter 1.1.1, and always got stuck at the Authentication with App Store stage, no matter how long I wait, I tried uploading using Xcode, using xcrun altool, Transporter, nada.
Finally I got it working by exporting the ipa file to a new Macbook (10.15.3, Xcode 11.3.1, Transporter 1.1.1), and used the Transporter app to upload it there.
The key difference is the Transporter tool on my new Macbook asked for a 6-digit code as authentication while the old Macbook did not, I suspect the authentication token on my old device expired but the system didn't ask for a new one when trying to upload the app. I had 2-FA enabled.
So I think forcing a manual re-authentication when you upload the app is the answer, the only other difference is the MacOS version, but I didn't test if it'll make a difference.
I solved the problem by removing ~/Library/Caches/com.apple.amp.itmstransporter.
For safety, renaming will be better,
cd ~/Library/Caches
mv com.apple.amp.itmstransporter com.apple.amp.itmstransporter.old
Then, xcrun altool uploaded my ipa successfully.
By the way, I'm using Xcode 11.x & 12.2, macOS Catalina.
In 2020 Dec, the fix did finally worked for me was restarting my mac.
Today I ran into this issue, on Xcode 11.2.1 I solved it by going to Xcode -> Preferences -> Accounts -> Tapped on the '-' next to my Apple ID, then signed in again. This fixed it for me!
In April 21, 2021, I followed #DawnSong's answer, outlined in the image below but I also restarted my Mac and voila it worked.
Spec
Xcode 12.4
macOS Big Sur 11.2.3
You may try to relogin your ITC account via Application Loader.
Just try a different Internet connection. I tried all the solutions above but none worked. However, when I tried using my cellular connection (instead of my DSL connection that stands behind a firewall), it worked immediately.
It might be a network issue. If you are running inside a virtual machine (e.g. VMWare or VirtualBox), try setting the network adapter mode from the default NAT to Bridged.
All i did was duplicate my Application Loader.app in /Applications and
ran both Application loaders at the same time.
this solution is out there, it used to work for me, but today not even that! what I did and worked is that (2 instances) + uploading with XCode (organizer). Had to try a couple of times and it worked.
hope this helps someone, this bug has been there for quite a lot of time now() an apple doesn't seem to care too much
Another reason could be that you have changed the machine from which you're submitting the app. Or the user account on the machine. The new machine may lack the private key and/or certificate for the App Store. Although a certificate with the correct name is displayed in Xcode.
In this case, go to https://developer.apple.com -> certificates, use the plus sign (+) to add a new certificate (distribution), and follow the steps to request a certificate for the private key on your current machine. After installing the certificate, authentication may work.
For me I tried almost all the suggestions given above but the problem still reoccurred after the first success in uploading to App store. Until I found this website. In summary, do the following
Open terminal
Run this command:
rm -rf ~/.itmstransporter/
“/Applications/Xcode.app/Contents/Applications/Application
Loader.app/Contents/itms/bin/iTMSTransporter”
Note: this command(which is different from others above) will delete your ITMSTansporter folder and create a new one and ensure that xcode is quitted before running this command.
3. Start Xcode and all should be well.
Using Xcode 12.3 Distribute App and xcodebuild both got stuck today at this point.
I finally was able to solve this. Peeking around my system I found 3 versions of iTMSTransporter.
Printing the version of each using ./iTMSTransporter -version gives the following results:
/Applications/Transporter.app/Contents/itms/bin/ has version 2.0.0
/Applications/Xcode.app/Contents/SharedFrameworks/ContentDeliveryServices.framework/Versions/A/itms/bin/ has version 2.1.0
/usr/local/itms/bin/ has version version 1.9.3
So it looks that old version in /usr/local/itms was used by Xcode. After deleting /usr/local/itms I was able to upload my binary within Xcode 12.2 and using the xcodebuild command line tool.
Check your firewall
Network settings - (Check with network admin, usually they have blocked apple services unknowingly)
Check your system data/time.
I had same sort of issue, I resolved it by getting direct access to internet.
Also check Application Loader logs to see at which point it gets stuck.
I think I followed all the approaches given, but none worked for me.
My own approach that seems to work for me is to go thru the initial steps to upload a binary, then, after selecting the binary, do NOT click Send; instead close the window, and in the new window that will appear, start anew: hopefully it will go thru.
Found the solution:
I was uploading the build, Every activity went well except “Authenticating with the iTunes store”.
I disconnected my LAN cable and Connected my MAC with my mobile hotspot. and authentication problem was solved. If you have a limited internet plan then as soon as you pass authentication stage, again connect your LAN so that it will upload the app from you LAN cable's internet connection.
my upload failed each time when I uncheck the "include bitcode" option when uploading. So I checked the "include bitcode" option and upload went well.
Check your Firewall, If it is "On" then just Off it, then try