I'm trying to get the Hello World app running on a iPhone, but have been getting a confusing error. I've tried this 4-5 times over the last 4 days with the same results. Here are the steps I have followed:
1- I started with a fresh NetBeans install (NetBeans 8.2 Patch 1 under Windows 7), installed the plugin (v3.6.0), and created a new CodenameOne Project named 'Hello' from the Flat Blue theme and the template 'Hello World (Bare Bones). I set the package name to something unique as required.
2- Then I went to developer.apple.com and revoked any certificates that were there, and deleted all of the appIDs and Provisioning Profiles. There is one iPhone5 device specified. I believe this should give CodenameOne a clean slate to work with.
3- Back with NetBeans and CodenameOne, I invoked the 'iOS Certificate Wizard', specified my AppleID/pswd when requested (yes they are valid!), and selected my iPhone device. The next screen summarized the certs (2 of them) and an AppID to be used to generate the provisioning profiles. On the next step, I get the error: "Could not create the appstore profile." with accompanying messages to the effect that "The Apple Developer website is undergoing maintenance", etc. I've included the screen capture:
When I check https://developer.apple.com/system-status, everything looks like it should be ok. If I look at my Apple Developer Account, Codename One has generated an iOS Development Certificate and an iOS Distribution Certificate, but not any App IDs or Provisioning Profiles.
FWIW, the plugin is version 3.6.0 from the default update site (https://codenameone.googlecode.com/svn/trunk/CodenameOne/repo/netbeans/updates.xml)
Has anyone else had this problem? I'm at a loss as to what to try next.
Any help would be appreciated.
Thanks,
Terry
On trying to generate a certificate on my side, I experienced the same issue.
It's a generic 'come back later' message from Apple.
Contact Apple and I will do the same to let them know about the issue.
Their system status is an idle dashboard which is unreliable.
Edit:
On trying again, I clicked Ok on that message and proceeded. The certificates and Provisioning Profiles were generated successfully and the app works fine with the certificates.
Related
I see that this question has been asked many times but I see no solution that works for me so I'm hoping that providing more info might shed some light.
We use appcenter.ms to test iOS apps. Until our iOS certificate expired this method worked fine. We generated a new enterprise certificate and ad hoc provisioning profile for new releases of the iOS app. Which led to the first curiosity.
I see how to upload a certificate on appcenter.ms but not a provisioning profile. I thought there was an option to do this in the past but perhaps I am mistaken. However, the app is signed with a provisioning profile before upload, so perhaps this is not needed now.
Once the app is uploaded, it can't be installed. It remains grey and when you tap it, you get the "this app cannot be installed because its integrity could not be verified" error. Again, that the .ipa is created with an ad hoc certificate and profile in Xamarin (VS for Mac).
Also, I can't install the provisioning profile on a device from appcenter.ms. You basically get stuck in a loop where you seem to successfully install the profile but have to keep doing it because it never actually installs.
I hope this is enough info for some insight and thanks in advance for any feedback.
We were able to solve this by redoing and downloading development certs and via
And also downloading and double clicking the apple development certificate here
After that our keychain showed both as trusted and we could build to the iPhone again.
The issue can be the your device is simply not registered on the developer portal and/or that ad-hoc provisioning profiles have not been regenerated.
You need to register your device, regenerate a provisioning profile with this device in it and rebuild your app using this profile.
This can also happen because of
Developer ID Notary Service - Outage
which can be checked on https://developer.apple.com/system-status/
Notarization is well explained here:
Notarization gives users more confidence that the Developer ID-signed
software you distribute has been checked by Apple for malicious
components. Notarization is not App Review. The Apple notary service
is an automated system that scans your software for malicious content,
checks for code-signing issues, and returns the results to you
quickly. If there are no issues, the notary service generates a ticket
for you to staple to your software.
Work around fix:
Select your app.
Navigate to TextFlight tab
Create External Testing group
Add one tester
Add build which you want to download using TestFlight
Open TestFlight and download an app.
In my case this was caused by trying to include an entitlement for aps-environment "development" when using an Ad-Hoc provisioning profile. The value for this environment in Entitlements.plist must match what is hard coded into the provisioning profile file - if you open an Ad-Hoc profile in a text editor you will see it expects the "production" environment.
The possible solutions depending on your requirements are to either use the Development profile/certificate, or change the aps-environment to "production" to continue using an Ad-Hoc provisioning profile.
It can also happen if you have other incorrect entitlements - worth checking what entitlements are enabled under the Identifier in Apple Developer portal and removing unnecessary ones.
I had this issue because when building the app on xCode for distribution (Product->Archive then Distribute App), I chose automatic signing. After manually signing the app and choosing my own generated certificate and profile, everything worked again fine.
I removed the Entitlements file from the Addition Resources in iOS Bundle Signing and it worked.
I think the MSAL configuration was set to debug in entitlements.plist
I have also face this issue before but for me the reason was little different
First the build was enterprise one and the build was made on the earlier Xcode version on which the iOS version you are using on the device was not supported by the Xcode.
All I did was to update my Xcode and make a new build and shared the build. After that we were able to install that build over device Hope it works for you as well
This is how I solved for myself.
In you iPhone Settings > General > VPN & Device Management you should see your company name (if an app from it is installed), and if you click on it, you will see a button like "Verify" above the list of apps installed provided by the company. Just click on "Verify".
I'm trying to submit an app but I'm stuck. I can't get a the iOS Distribution signing identity to show up as valid under my account in Xcode 6.
It always shows up as revoked, never valid. I've made sure to connect it to my provisioning account on the dev site.
I also went to the developer site, revoked it there, recreated it, then went back to xcode to try to submit my app but I get this message:
When I check my account in preferences after getting this message, the iOS distribution doesn't even show up:
And when I try to add one it says:
I've tried:
Deleting the iOS Distribution cert and regenerating it on xcode (generates as revoked)
Deleting it and creating it on developer.apple.com
Linked my provisioning profile to the correct app id
Using Xcode 5 to submit my build instead
I don't know what to import or where to find a developer profile from. I've checked the dev documentation and it says the Your account already has a valid iOS Distribution certificate error happens when switching mac computers, but this is all on the same machine. I am using a VMWare to run this on an virtual image of iOS Mavericks, could that be culprit?
Make sure the time settings on your Mac are correct.
When you use a virtual machine and pause it, it pauses the time on the Mac as well. Your time settings are probably pushed back because of it, making your certificates invalid valid until a time later in the future.
For more info, see: Distribution certificate error:"This certificate is not yet valid."
I am working on xamarin for ios.
Its was working on my older machine. But, then i had to switch to new machine and recreate all the certificates and everything for the new machine.
I have created the app ID. Then created the aps certificates and then created the provisioning profile.
In Debug I have provided the downloaded provisioning profile. But still I am getting this same error. And my app is unable to get the device token.
I am searching a lot since last night. And have done the following things with no success:
Regenerating provisioning profile and trying with the new one
I also deleted the app id itself. Recreated everything from start. All Certificates, app id, provisioning profile
Deleted all the provisioning profile from my system and device. Created new profiles and installed them.
Above are three most common solutions i found in my searches, but to my dismay nothing is working for me.
If you have any idea please throw at me. I am in a great need for that. Its holding me from submitting the app.
Please help.
The problem was xamarin studio itself. It seems that after updating form stable 5.2/5.1 version to 5.3 this issue surfaces. So i deleted the app and installed it again which game me v5.2. Now i am not udpating till i publish my app.
This link is full of people facing this problem:
http://forums.xamarin.com/discussion/22502/xamarin-studio-5-3-push-notification-error
did you add the App's Development SSL Certificate to your keychain? when enabling push notifications for the App ID you should generate a Development SSL Certificate for the App, download it and add it to your key chain.
When I ran into this issue, my first thought was to search Stack Overflow for solution. I did the search, found several topics. But, unlike my issue, those posters got some clue from the error such as,
App Store error: The binary you uploaded was invalid
Invalid iPhone Application Binary
Uploading Binary iPhone App "The signature was invalid" again again and again
The binary you uploaded was invalid. The signature was invalid, or it was not signed with an Apple submission certificate
Or this one:
"The binary you uploaded was invalid. the file was not a valid zip file" Error message uploading app to iTunes Connect
The binary you upload was invalid. the file was not a valid zip file
Or this one
CFBundleVersion in the Info.plist Upload Error
The binary you uploaded was invalid. The key CFBundleVersion in the Info.plist file must contain a higher version than that of the previously uploaded version.
But for me, I got nothing, it just says ERROR ITMS-9000: "The binary you uploaded was invalid"
I try to resolve this issue by the following attempts, all of them failed
Test on simulator make sure the app works ... Check!
Test on device (iPhone 5S, iOS 7 and iPhone 4s iOS 6) to make sure the app works ... Check!
Clean and build ... Done!
Make sure that I'm using distribution profile (not ad hoc, dev) ... Check!
Redo the whole process of certificate and provisioning profile ... Done!
Check my code signing identity ... Check!
Check bundle id, there are matches (Xcode == App ID in Apple Developer == App in iTunes Connect) ... Check!
App ID case sensitive check .... Check! (lower case, com.companyname.productname)
Delete target in project and then create a new one (I have one project, multiple targets) ... Done!
Delete scheme and then create new one ... Done!
Check icon size, check loading image size, check pixels per inch ... Check!
Check Localizable.strings for typo ... Check!
Delete build foler ... Done!
Restart Xcode, restart computer ... Done!
Connect to another wifi router ... Done!
Submit from my colleague Macbook ... Done!
Create new App ID, new certificate, new provisioning profile and update iTunes Connect Bundle ID ... Done!
Take a break for an hour, try again ... Done!
I really have no idea what did I do wrong. I've been submit app since iOS 4, hundreds of updates. But never ran into anything like this. In fact, I've just update another app yesterday which share the same codebase with this one, no issue at all.
Is there a way I can gather more information about "the invalid binary" Xcode is telling me? Or is there anything else I should try?
For everyone who found this topic (18 July 2014), maybe your best shot might be, taking a break for few hours (or a day) and try again.
--- Last Update ---
It turns out to be Apple Server issue
Says, I have an application called "Sample App"
This app has an app id of com.tartw45.sampleapp
This app use an App Store Distribution profile called "Simple App App Store Distribution Profile"
Back to last Friday (18 July 2014), everything seems ok, no indicator of any error but I couldn't publish the app as I stated above
Today (21 July 2014), I tried again with archive from last week, still no success.
I decide to redo the archive process and I found that "Simple App App Store Distribution Profile" is no longer valid
I login to developer.apple.com and found that "Simple App App Store Distribution Profile" also no longer there in the list of all provisioning profile. **
Then I try to create a new provisioning profile with the same name (Simple App App Store Distribution Profile) but there is an error says that this profile is already exist, please choose another name **
So, I create a new provisioning profile with slightly different name, refresh the provisioning profile in XCode, archive again and then publish .... Works!
So, It's definitely Apple Server issue and your provisioning profile (**), it has nothing to do with your XCode version or project setting (if you successfully submitted your app once before running into this issue with no reason). So, anyone who found this topic, please try to validate your provisioning profile and try to publish again.
I was having the same issue since last night and finally got it to work just now. Had to go through this process
Logged in on https://developer.apple.com> > Certificates, Identifiers & Profiles > Provisioning Profiles and revoked my company's Distribution Certificate.
Then Xcode > Preferences > Accounts > Apple IDs > (my company) > View Details and refreshed the certificates and Provisioning Profiles. It prompted that no Distribution Certificate was found on the Developer Profile and offered to request one on my behalf, which it did.
Launched Keychain Access > Certificates and removed all of the expired Certificates (somehow I had a few of them)
I went back to https://developer.apple.com> > Certificates, Identifiers & Profiles > Provisioning Profiles and edited all of my manually managed Provisioning Profiles (Development — which had to be re-generated — and Distribution — which had to be linked to the newly created Distribution Certificate and generated again)
Once again Xcode > Preferences > Accounts > Apple IDs > (my company) > View Details and refreshed the certificates and Provisioning Profiles.
Credit to Rodrigo on the apple dev forums
iTunes connect (or at least some services that iTunes Connect uses) are down for the moment, so "Take a break for an hour, try again ..." is your best shot. Apple of course doesn't update their status page until tomorrow or so.
https://developer.apple.com/system-status/
It's on Apple's side. I tried to validate a couple of apps that worked last night, no changes in code, credentials, or Xcode and this is what I get.
We found it wasn't necessary to revoke anything- when I went to Provisioning Profiles->Distribution, the two profiles for our two apps we were trying to release had been removed. I recreated those profiles (but I had to assign new names, using the old name led to a "profile already exists" message- so those identifiers are still out there- somewhere). Downloaded and installed the new profiles, resubmitted the archives we made on 7/18/14, and everything sailed right through.
Apple iTunes' Connect server is down at the moment. I have tried almost everything, but all failed.
I suggest as above to take some rest and try upload after an hour or so.
I ran into the same error when I tried validating my app. I got a message saying,
Unable to process app at this time due to general error
I searched on SO for this and only found a suggestion to wait for some time, as this is an error from Apple's servers. I tried all sorts of things, from playing with provisioning profiles to improving app performance and linking libraries, none of which resolved the issue. Unfortunately, I guess we don't have any other options than to wait and let Apple do its work.
Yesterday, I had to regenerate an expired distribution certificate and got errors each time. Now it works, but I got the invalid binary error. It looks like Apple have done some changes and missed up something.
There might be a link between a change in certificates yesterday and the invalid binary error today, which gives a possible explanation of this problem.
I've had the same issue and have found out that my Provisioning Profile for Distribution "somehow" disappeared from the Apple Developer Portal. But when I tried to re-create it, I received error message about the existing one (which I couldn't find at all).
Finally, I've just created a brand new Distribution Provisioning Profile, downloaded and installed it. In the end, I was able to validate the application package and upload was successful.
Just spent a while on this also, my upload previously worked and managed to get through validation.
However, once up Apple would fail/reject the uploaded binary due to something similar to the below
https://stackoverflow.com/questions/18952213/invalid-directory-name-your-app-contains-a-directory-name-that-is-already-rese#=
Upon retrying, later without making any modifications, rather then sucedding then failing after validation I started receiving an error exactly the same as the OP.
Fixing the framework reference issue, enabled me to succesfully upload.
So rather then uploading passing validation and then being rejected, it would not pass validation, and I give the same error, without any hints.
Hopefully this helps someone else.
In my case I updated my Mac version and it worked fine afterwards.
I know there are already several questions on the subject, but I am really desperate. I don't know what else to do than to look for an advice here.
So, I have an app ready to be uploaded.
I have checked all the pre-steps, before trying to upload:
Bundle ID matches in info.plist, iTunesConnect, Apple developer, Provisioning profile
Game works perfectly when I run it on the device, in app purchase works with a test user, and not a single issue appears
Here are some screenshots with some info:
What I have noticed is that there isn't any Provisioning Profile selected:
Yet, when I select the provisioning profile I made earlier, I get this error. When I clock "Fix" it changes it back to none provisioning profile selected.
I don't know if that's the cause of the trouble
All in all, this is the Error I get:
This is my first time that I'm uploading an app with in app purchase. So I might missed some obvious step. I really hope that somebody will see the problem here, because I've been trying to fight this for 2 days now :(
When you see "iPhone Developer" in the code signing identity, that means Xcode will automatically select a matching identity to sign the app (It doesn't mean that no profile is selected).
From what I can see it looks like "iPhone Developer" is chosen for both Debug and Release configurations which will likely cause a problem because you cannot submit a Developer signed app to the App Store, it must be signed with a Distribution certificate and Distribution profile.
You will need to ensure that you have created a Distribution Certificate and profile to sign your app with before archiving it and submitting it via Xcode.
I would recommend you read up on how app store distribution works from the Apple documentation here:
https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppDistributionGuide/Introduction/Introduction.html
Then if you still are having trouble, read the trouble shooting guide from the docs here:
https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppDistributionGuide/Troubleshooting/Troubleshooting.html
I have had a similar problem. We received an APP from an external provider and re-signed the APP ourselves using our own certificate and provisioning profile. When uploading the APP with Application Loader I received the error ITMS-90167: No .app bundles found in the package.
I have sierra installed on my Mac and I am using XCode 8.0 but had an old version of Application Loader (3.0) that was installed separately. Using this version of Application Loader I got the message. If I instead used the Application Loader that is part of Xcode (from the XCode/Open Developer Tool menu), ie version 3.6 everything worked out great and the ipa file was successfully uploaded to ITunesConnect.