if I set a search bar to the navigation titleView, like
navigationController?.navigationBar.topItem?.titleView = self.searchBar
, but I set it's frame by using autolayout like:
self.searchBar.snp_makeConstraints { make in
make.left.equalTo(leftSpace)
make.right.equalTo(-leftSpace)
make.top.equalTo(10)
make.height.equalTo(44)
}
, and then it will cause broken if I push to another view controller.
And if I set it's frame by using this way:
self.searchBar.frame = CGRectMake(leftSpace, 0, screenSize.width - 2 * leftSpace, 44)
it runs well...
Anyone can tell me why? Thx...
TitleView's layout is managed by navigation controller. The constraints you've added to your view will be ignored when added to titleView. If you want to fully customized the navigation bar, I suggest to create your own view.
Related
I'm building an application for iOS, which is using a navigation controller. I want to put a view in the titleView, and have it fill the whole width of the navigation bar.
I'm calling setupNavBar in viewDidLoad of the view controller that is embedded in the navigation controller. Here is how I do:
func setupNavBar() {
let navBar = navigationController?.navigationBar
// navBar!.translatesAutoresizingMaskIntoConstraints = false
// navBar!.frame.size.height = CGFloat(100)
let searchBar = UIView(frame: navBar!.frame)
searchBar.bounds = CGRectMake(0, 0, navBar!.frame.width, navBar!.frame.height)
searchBar.backgroundColor = UIColor.brownColor()
navigationItem.titleView = searchBar
}
But the view (brown - "searchBar"), doesn't cover the full navigation bar:
So I figured out that the problem was related to Autoresizing and Constraints, because if I call navBar!.translatesAutoresizingMaskIntoConstraints = false, I can freely set the sizes of views frame, so there must be some constraints that change the view's bounds. But I would like to keep as much of the autolayout behaviour as possible.
Is there a way to only change the contraints on the titleView?
I'm doing everything programmatically, I don't use the storyboard or xib's!
EDIT:
But it doesn't seem like there is any constraints on either navigationItem or navBar:
for someObject in navigationItem.titleView!.constraints {
print(someObject)
}
It doesn't print any constraints. neither if I use navBar.constraints!
EDIT 2:
I have a screenshot from "View UI Hierarchy" from the debug navigator:
It seems that the view(brown) alligns with the Navigation Bar Back Indicator View, maybe this is a clue to what causes the problem?
How come the view is resized?
Two different suggestions here:
1. You can try the
navigationItem.titleView.sizeToFit()
Otherwise you could set the background colour of the navbar to brown as it appears you wish the brown bar to cover the entire width of the navbar. If you want to add other views on top of that you then can.
You could also try to make an outlet to the title view and add an NSLayoutConstraint using
navigationItem.titleView.addConstraint(NSLayoutConstraint: NSLayoutConstraint)
I am not entirely sure whether that will work, however.
I started building a TableView in my app by using a TableViewController in a storyboard. When you do this, you have a very cool effect when you scroll down your list : the cells moving behind the nav bar get blurred.
Some time later, I had to move from this TableViewController to a ViewController with a TableView inside (I had to add other views at the bottom of the table).
In order to avoid having the first cells hidden by the navigation bar (being over it), I added constraints to the Top and Bottom Layout Guides, and to the left and right edges of the view.
This works fine, but I lost the cool blurred scrolling effect : the cells seem to be disappearing before going behind the navigation bar.
I've seen workarounds with people not using constraints and putting magic numbers in interface builder. I cannot do this, first because I dislike it, and second because I have to be iOS 6 compatible.
What did I miss to be able to benefit again from the blurred navigation bar effect ?
You have to manually adjust the contentInset of the table view and make sure the table view frame origin is 0, 0.
In this way the table view will be below the navigation bar, but there will be some margin between the content and the scroll view edges (the content gets shifted down).
I advise you to use the topLayoutGuide property of the view controller to set the right contentInsets, instead of hard coding 64 (status bar + navigation bar).
There's also bottomLayoutGuide, which you should use in case of UITapBars.
Here is some sample code (viewDidLoad should be fine):
// Set edge insets
CGFloat topLayoutGuide = self.topLayoutGuide.length;
tableView.contentInset = UIEdgeInsetsMake(topLayoutGuide, 0, 0, 0);
By the way, this properties of UIViewController might help you (you should not need to change their default values, but I don't know what your view hierarchy is):
automaticallyAdjustsScrollViewInsets
edgesForExtendedLayout
extendedLayoutIncludesOpaqueBars
The tableView needs to be full screen. That is underneath the top and bottom bars. Note don't use the top and bottom layout guides as they are used for positioning relative to the bars not underneath.
Then you need to manually set the content inset of the tableview. This sets the initial scroll position to under the top bar.
Something like:
CGSize statusBarSize = [[UIApplication sharedApplication] statusBarFrame].size;
CGFloat h=MIN(statusBarSize.width, statusBarSize.height);
UIEdgeInsets e = UIEdgeInsetsMake(self.navigationController.navigationBar.bounds.size.height + h,
0.0f,
0.0f,
0.0f);
self.tableView.contentInset = e;
Not you get this functionality for free when using a tableView controller and the "Automatically Adjust content inset" settings
You probably have the coordinates of your tableView not set to (0, 0) to map to those of the viewController.view.frame or viewController.view.bounds. If you have done that, try setting
self.navigationController.navigationBar.translucent = YES;
UIViewController property edgesForExtendedLayout does the trick. If you are using storyboards just make sure Extended Edges Under Top Bars is on (and it is by default).
If you are creating your view controller programmatically try this:
- (void)viewDidLoad
{
[super viewDidLoad];
self.edgesForExtendedLayout = UIRectEdgeAll;
}
And of course, your table view needs to have proper autoresizing mask/layout constraints
edgesForExtendedLayout is not what you want here, as this will limit the table view underneath the navigation bar. In iOS 7, the view controllers uses fullscreen by default, and the property controlling where the tableview content starts is automaticallyAdjustsScrollViewInsets. This should be YES by default, so check if it is somehow set to NO, or try setting it explicitly.
Check this answer for a good explanation on how this works:
https://stackoverflow.com/a/19585104/1485715
In my storyboard, I have a View controller (embedded in a navigation controller).
Inside the view controller I have a tab bar controller, and inside a tab a table view controller. My problem is that the last row of the table view goes "under" the tab bar of the tab bar controller. This didn't happen if i build my app for iOS 6.
How can I solve this? Thank you!
Try setting your tabbar translucent property.
self.navigationController.navigationBar.translucent= NO; // Set transparency to no and
self.tabBar.translucent= NO; //Set this property so that the tab bar will not be transparent
The accepted and upvoted answers don't work for my setup:
UITabBarController -> UINavigationController -> UIViewController -> UITableView
My app's root view controller is a UITabBarController. Every tab is a UINavigationController, and in one tab, the navigation controller's root is a UIViewController with a table view as the main view.
So here's what worked for me: When alloc-initing the UITableView, I compute for the height and set it in the table view's frame. The general formula is screen height - (status bar height + nav bar height + tab bar height).
This, as said, will work perfectly. I've just tested it.
self.tabBar.translucent = NO;
I think it has to do with automaticallyAdjustsScrollViewInsets not being applied (or applied correctly) due to the nested structure of your view controller hierarchy.
Try and copy your table into a new UIViewController and make sure the checkmark in the UIViewController's identity inspector called "Adjust Scroll View Insets" is turned on.
I had the same problem, and the up-voted answers did not solve it. See my answer to a similar question, Tab Bar covers TableView cells in iOS7.
I solved the issue by manually setting the table view's frame in the table view controller's viewWillAppear: method (as suggested by Matt Quiros) to the height of the screen - (status bar height + nav bar height + tab bar height).
- (void)viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
// Adjust height of tableview (does not resize correctly in iOS 7)
CGRect tableViewFrame = self.tableView.frame;
tableViewFrame.size.height = [self heightForTableView];
self.tableView.frame = tableViewFrame;
}
- (CGFloat)heightForTableView
{
return CGRectGetHeight([[UIScreen mainScreen] bounds]) -
(CGRectGetHeight([[UIApplication sharedApplication] statusBarFrame]) +
CGRectGetHeight(self.navigationController.navigationBar.frame) +
CGRectGetHeight(self.tabBarController.tabBar.frame));
}
If anyone finds a better solution to this problem, please share!
I have been reading a lot about iOS7 UI transition.
I am not able to get what these three properties automaticallyAdjustsScrollViewInsets, extendedLayoutIncludesOpaqueBars, edgesForExtendedLayout??
For example I am trying to make my view controllers start below the status bar but I am not able to achieve it.
Starting in iOS7, the view controllers use full-screen layout by default. At the same time, you have more control over how it lays out its views, and that's done with those properties:
edgesForExtendedLayout
Basically, with this property you set which sides of your view can be extended to cover the whole screen. Imagine that you push a UIViewController into a UINavigationController. When the view of that view controller is laid out, it will start where the navigation bar ends, but this property will set which sides of the view (top, left, bottom, right) can be extended to fill the whole screen.
Let see it with an example:
UIViewController *viewController = [[UIViewController alloc] init];
viewController.view.backgroundColor = [UIColor redColor];
UINavigationController *mainNavigationController = [[UINavigationController alloc] initWithRootViewController:viewController];
Here you are not setting the value of edgesForExtendedLayout, therefore the default value is taken (UIRectEdgeAll), so the view extends its layout to fill the whole screen.
This is the result:
As you can see, the red background extends behind the navigation bar and the status bar.
Now, you are going to set that value to UIRectEdgeNone, so you are telling the view controller to not extend the view to cover the screen:
UIViewController *viewController = [[UIViewController alloc] init];
viewController.view.backgroundColor = [UIColor redColor];
viewController.edgesForExtendedLayout = UIRectEdgeNone;
UINavigationController *mainNavigationController = [[UINavigationController alloc] initWithRootViewController:viewController];
And the result:
automaticallyAdjustsScrollViewInsets
This property is used when your view is a UIScrollView or similar, like a UITableView. You want your table to start where the navigation bar ends, because you wont see the whole content if not, but at the same time you want your table to cover the whole screen when scrolling. In that case, setting edgesForExtendedLayout to None won't work because your table will start scrolling where the navigation bar ends and it wont go behind it.
Here is where this property comes in handy, if you let the view controller automatically adjust the insets (setting this property to YES, also the default value) it will add insets to the top of the table, so the table will start where the navigation bar ends, but the scroll will cover the whole screen.
This is when is set to NO:
And YES (by default):
In both cases, the table scrolls behind the navigation bar, but in the second case (YES), it will start from below the navigation bar.
extendedLayoutIncludesOpaqueBars
This value is just an addition to the previous ones. By default, this parameter is set to NO. If the status bar is opaque, the views won't be extended to include the status bar, even if you extend your view to cover it (edgesForExtendedLayout to UIRectEdgeAll).
If you set the value to YES, this will allow the view to go underneath the status bar again.
If something is not clear, write a comment and I'll answer it.
How does iOS know what UIScrollView to use?
iOS grabs the first subview in your ViewController's view, the one at index 0, and if it's a subclass of UIScrollView then applies the explained properties to it.
Of course, this means that UITableViewController works by default (since the UITableView is the first view).
Not sure if you are using storyboards, but if you are, to make your view controllers start below the status bar (and above the bottom bar):
Select the view controller in IB,
In the attributes inspector, deselect 'Extend Edges - Under Top Bars' and 'Extend Edges - Under Bottom Bars'.
I am using storyboards and using the above advice worked however I wasn't exactly sure how to implement it. Below is a short example in swift of how it cleared up the problem by putting the recommended solution into the ViewController.
import Foundation
import UIKit
// This ViewController is connected to a view on a storyboard that
// has a scrolling sub view.
class TheViewController: UIViewController {
// Prepares the view prior to loading. Putting it in viewDidAppear didn't work.
override func viewWillAppear(animated: Bool) {
// this method is an extension of the UIViewController
// so using self works as you might expect.
self.automaticallyAdjustsScrollViewInsets = false
// Default is "true" so this sets it to false tells it to use
// the storyboard as you have it placed
// and not how it thinks it should place it.
}
}
My Problem:
Auto Adjust set to true by default causing a difference between storyboard design and simulator
Resolved:
Code above applied, turning off the auto-adjust.
I solved this problem by adding this line, but my problem was related to a UIView, not UIScrollView
self.navigationController.navigationBar.translucent = NO;
Just bare in mind that
automaticallyAdjustsScrollViewInsets
property works only if some kind of scroll view (table view, collection view,...) is either
The view of VC, or
First subview of this view
Other suggested, that it doest work even if it is the first subview, but there are other scroll views in the view hierarchy.
EDIT (extension DIY)
If you want similar behaviour even if you can't fulfil these conditions (e.g. you have a background image below the scroll view), you can adjust the scroll view insets manually. But please don't set it to constant like 44 or 64 or even 20 like many suggest around SO. You can't know the size ever. There can be the incall/gps/audio notification, navigation bar doesn't have to be always 44 pts etc.
I think the best solution is to use layoutGuide length in didLayoutSubviews:
override func viewDidLayoutSubviews() {
super.viewDidLayoutSubviews()
scrollView.contentInset = UIEdgeInsets(top: topLayoutGuide.length, left: 0, bottom: 0, right: 0)
scrollView.scrollIndicatorInsets = scrollView.contentInset
}
You can use the bottomLayoutGuide in the same way.
This is a weird error that may just be an issue in Xcode for all I know. I have a tab bar controller where the first view is a UITableView with (obviously) a number of cells. When you select a cell, I've set up a segue on the MainStoryboard to go to a detail view controller. I want the tab bar to be hidden when I go to the detail view, so I went into the storyboard, chose my detail view, and clicked "Hides Bottom Bar on Push" in the editor screen that starts with "Simulated Metrics."
Everything works just fine, except that when I tap on a cell, a black bar flashes at the top of the UITableView screen, dropping the tableview cells down (as if the cells are falling down below the tab bar at the bottom), just before the screen pushes over to the detail view. The effect isn't harmful at all, but it's very disconcerting, and I'd like to smooth that out.
The only fix I've found is to uncheck the "Hides Bottom Bar when Pushed" option on the storyboard. That indeed does get rid of that black bar flash, but of course the tab bar stays on the screen when I go to the detail view, which is what I don't want.
Any ideas?
Just for completeness' sake, I went ahead and ran
[self.navigationController setToolbarHidden:YES animated: YES];
on the detail view controller's viewWillAppear method (and even tried it with the storyboard option both on and off), but there was no difference. The toolbar did indeed hide just fine, but I still got that black line at the top. So weird.
I know it is too late !!! I ran into same issue. It seems like the Auto resizing mask for the view was incorrect to be exact the UIViewAutoresizingFlexibleTopMargin. I checked this on in the xib file. If you are trying to do it in code make sure this flag -UIViewAutoresizingFlexibleTopMargin - is not included in the autoresizing mask.
Hope this will help some one in the future
I know it is a bit late, but I have same problem and I can't solve it with any of the previous answers. (I suppose this is the reason non was accepted).
The problem is that view size of the SecondViewController is same as view size of a previous ViewController, so too small to fit in a ViewController with Toolbar hidden. Thats why black background of a UITabBarController is visible at the top when transition is happening, and on a viewDidAppear view will stretch on right size.
For me it help to subclass root UITabBarController and set background color to same background color as SecondViewController has.
class RootViewController: UITabBarController {
override func viewDidLoad() {
super.viewDidLoad()
self.view.backgroundColor = Style.backgroundColor
}
}
Then you can leave checkbox checked inside storyboard and it will look ok.
P.S.
If you have some views, that is position on the bottom part of the view, you need to set bottom constraints so they are smaller by 49 (because this is the height of the toolbar), and then on viewDidAppear set the right constraint.
For example:
I have view that need to be position 44 px from bottom edge. Before, I have constraint set to 44 and I have some strange behaviour of that view. It was placed to height and then jump on the right place.
I fix this with setting constraint to -5 (44-49), and then in viewDidAppear set the constraint back to 44. Now I have normal behaviour of that view.
Wow I just had the same issue now, very painful, and no info on the net about it.
Anyway, a simple workaround for me was to change the current view's Frame moving the y coordinates up and making the height bigger by the height of the tab bar. This fixed the problem if done straight after pushing the new view onto the navigation controller. Also, there was no need to fix the Frame afterwards (it must be updated when the view is shown again).
MonoTouch code:
UIViewController viewControllerToPush = new MyViewController();
viewControllerToPush.HidesBottomBarWhenPushed = true; // I had this in the MyViewController's constructor, doesn't make any difference
this.NavigationController.PushViewController(viewControllerToPush, true);
float offset = this.TabBarController.TabBar.Frame.Height;
this.View.Frame = new System.Drawing.RectangleF(0, -offset, this.View.Frame.Width, this.View.Frame.Height + offset);
Objective C code (untested, just a translation of the monotouch code):
UIViewController *viewControllerToPush = [MyViewController new];
viewControllerToPush.hidesBottomBarWhenPushed = YES; viewControllerToPush.hidesBottomBarWhenPushed = YES;
float offset = self.tabBarController.tabBar.frame.size.height; float offset = self.tabBarController.tabBar.frame.size.height;
self.view.frame = CGRectMake(0, -offset, self.view.frame.width, self.view.frame.height + offset); self.view.frame = CGRectMake(0, -offset, self.view.frame.size.width, self.view.frame.size.height + offset);
Do this in viewWillAppear of detailViewController, it should work fine
subclass your navigation controller, or just find the navigation bar
override func viewDidAppear(animated: Bool) {
super.viewDidAppear(animated)
let backdropEffectView = navigationBar.subviews[0].subviews[0].subviews[0] //_UIBackdropEffectView
let visualEffectView: UIVisualEffectView = UIVisualEffectView(effect: UIBlurEffect(style: .Light))
visualEffectView.frame = backdropEffectView.frame
backdropEffectView.superview?.insertSubview(visualEffectView, aboveSubview: backdropEffectView)
backdropEffectView.removeFromSuperview()
}