I cannot get my swift files imported into my Obj-C project. I know, there’s a lot already on this topic on stack overflow, and I’ve tried all answers in this thread on importing Swift code to Objective-C, but I've still got the same error in spite of what I've tried for my project called Plantasia:
When at the top of the script of the .m file of a pre-existing project I do
import "Plantasia-Swift.h"
I get file not found error.
What I've tried:
I've set for both project and example
"Defines Module" : YES
"Always Embed Swift Standard Libraries" : YES
"Install Objective-C Compatibility Header" : YES
Changed the Project Module Name to Plantasia
I’ve cleaned my build folder and tried a bunch of unlikely solutions like #import "Plantasia/Plantasia-Swift.h" , which don't work either.
I’ve tried prepending #objc to class declaration in the .swift file.
I’ve tried manually adding another bridging header, and specifying the "Swift Compiler – Code Generation" to my header.
I've tested starting from a blank Objective-C project, by creating a Swift file, and referenced it successfully within .m file. This shows that it's at least working normally for me in a clean project
I've been trying for hours, and I think there must be one incorrect setting somewhere that I'm unaware of. I've tried basically most of what I could find on the forums. Any additional ideas of things I should still check? Or is there a way of manually creating this "Plantasia-Swift.h" header file?
I have a project with mixed Swift and Objective-C in Xcode 8 that uses the generated "ModuleName-Swift.h" header file to import swift into Objective-c classes, but the preprocessor is not able to find the generated header file and throws an error on the import.
"Lexical or Preprocessor issue : 'ModuleName-Swift.h file not found'"
The project compiles just fine, but the preprocessor throws errors for the header not being found and for any Swift classes called inside the class there is no syntax highlighting or code completion. It's a struggle working with Swift classes in Objective-c that are unrecognized by Xcode 8, but yet compile just fine.
Any ideas on how to appease the preprocessor in Xcode 8?
I had exactly the same issue. Found the solution after adding a new file aiming to only one target (by mistake) and noticing that it had no problem reading the Swift classes. So, if you have multiple targets, and since the migration you didn't have the need to build and run them, suggest you to do that.
Have this problem when we have multiple targets. If the Objective-c Generated Interface Header Name variable in Swift compiler of newly created targets is different than the original target's value. Change it to the same value with original target. See the following:
change, newtargetname-Swift.h to originaltargetname-Swift.h for new target
To fix this issue Xcode 9.2, After long research i came to known my "Objective-c Generated Interface Header Name" is named after Product Name "productname-Swift.h"
You need to add this in your build settings.
There might be an issue while migrating to Xcode 8, where you will have unspecified in the build setting Swift header file.
This if from killerz
Go to
Build Settings->Objective-C Generated Interface Header Name
and set the value to YourModule-Swift.h (this is usually already set, this is the filename you need to import on .m file #import "YourModule-Swift.h"
If
your product's normal targets run fine, but
you get the error when running your test targets…
note that each target uses (and should use) a different filename for the Objective-C Generated Interface Header Name.
This means you cannot import the generated header file in your Objective-C .h files, because they won't be found in the test target:
Instead, you should move these #import statements into your Objective-C .m (implementation files), where they'll build successfully.
If you need to refer to Swift classes in a .h file, use the #class directive, e.g.:
//
// ViewController.h
// import-example
//
#import <UIKit/UIKit.h>
#class SomeSwiftClass;
#interface ViewController : UIViewController
- (NSString *) titleFromGenerator:(SomeSwiftClass *)generator;
#end
I have recently added a Swift file to my Objective-C only project. Xcode created the necessary header files, including the Objective-C Generated Interface Header. Everything works fine if I #import this header file "myProject-Swift.h" to the .m file where I am accessing the Swift class I have added.
However I will want to eventually use this Swift class throughout my project, and to avoid importing it every single time, I wanted to add this myProject-Swift.h import file to my .pch prefix file.
However when I try to build my app after having added this, I get a 'myProject-Swift.h' file not found error and the build fails.
Does this mean it is not possible to import this myProject-Swift.h in a .pch file?
Is it really only possible to do it in each .m file individually?
I have a project that was started in Objective-C, and I am trying to import some Swift code into the same class files that I have previously written Objective-C in.
I have consulted the Apple docs on using Swift and Objective-C in the same project, as well as SO question like this, but still no avail: I continue to get the file not found error after putting in #import "NewTestApp-Swift.h" (NewTestApp is the name of the Product and module).
Here is what I have done so far:
In Define Modules, selected YES for the app.
Ensured that the Product Module name did not have any space in it (see screenshot below question)
I have tried using #import "NewTestApp-Swift.h" inside ViewController.m, ViewController.h and AppDelegate.m but none of them has worked.
What else am I doing incorrectly? Thanks for your help.
Screenshot of settings:
Errors that I am presently encountering:
I was running into the same issue and couldn't get my project to import swift into obj-c classes. Using Xcode 6, (should work for Xcode 6+) and was able to do it in this way....
Any class that you need to access in the .h file needs to be a forward declaration like this
#class MySwiftClass;
In the .m file ONLY, if the code is in the same project (module) then you need to import it with
#import "ProductModuleName-Swift.h"
Link to the apple documentation about it
https://developer.apple.com/documentation/swift/imported_c_and_objective-c_apis/importing_swift_into_objective-c
If the Swift code is inside a Module (like in your case):
#import <ProductName/ProductModuleName-Swift.h>
If the Swift code is inside the project (mixed Swift and ObjC):
#import <ProductModuleName-Swift.h>
In your case, you have to add this line in the *.m file:
#import <NewTestApp/NewTestApp-Swift.h>
IMPORTANT: look at the "<" in the import statement
https://developer.apple.com/library/content/documentation/Swift/Conceptual/BuildingCocoaApps/MixandMatch.html
How I managed to import swift into objective-c:
Defines Module set to YES (on project - not on target)
Product Module Name set (on target - not on project)
In your ViewController.m import the swift code with:
#import "MyProductModuleName-Swift.h"
Add a swift file to your objective-c project (File -> New -> Swift) and Xcode will create the bridging header from objective-c to Swift but this is crucial for making it work the other way around too - apparently.
For the last piece in this puzzle thanks to Swiftoverload for making me aware of actually adding a Swift file via Xcode GUI and not just dragging and dropping existing swift-files into my project for making it work:
http://nikolakirev.com/blog/using-swift-in-objective-c-project
Using Xcode 8.2.1 and if you look at Project > Build Settings > Objective-C Generated Interface Header Name, there it shows only one header file named like Product-Swift.h
This means that instead of importing each modules separately from Objective-C .m file, using individual -Swift.h file, you just import one Product-Swift.h which aggregated all Swift modules.
I encountered the same problem by looking for traditional way of importing modules separately, but the current version of Xcode and Swift 3 changed it to use only one header for all module importing.
Spent an hour on this issue, following these steps will help you to understand what's missing:
Open Xcode preference and navigate to DerivedData folder
Search for "swift.h" in finder
If you can not find any project-swift.h file, this file haven't been generated. You usually need to add #objc to one of your swift class and successfully build the app, only then will Xcode generate this file
If you found "xxx-swift.h" file, make sure your import statement contains the correct name.
I was having problems importing Swift into an Objective-C project. In the end I looked into the Derivied Data folder to check what Xcode 7 was generating. The filename was completely different to the one I was expecting.
Once I had the actual filename I imported that and the project could build.
iOS - Swift.h file not found
[Mixing Objective-C and Swift]
<name>-Swift.h should be created by Xcode automatically if Swift code expose an API via #objc or #objcMembers[About]
Usually a location looks like
~/Library/Developer/Xcode/DerivedData/
ProductModuleName-foo/
Build/
Intermediates.noindex/
ProductModuleName.build/
Debug-iphoneos/
ProductModuleName.build/
DerivedSources/
ProductModuleName-Swift.h
It can be changed by
Project editor -> select a target -> Build Settings -> Per-configuration Intermediate Build Files Path
By default the value is $(PROJECT_TEMP_DIR)/$(CONFIGURATION)$(EFFECTIVE_PLATFORM_NAME)
Importing the header file, i.e.
#import "<ProjectName>-Swift.h"
within the .h file generated an error, stating:
-Swift.h' file not found
and the build failed.
Instead use:
#import "<ProjectName>-Swift.h"
within the .m file, and even though the same error appears, running the project anyway suppresses the error.
The swift classes are then available within the .m file.
If Your App name have any special character then use _ for special character.
For Example if your App name is Name "Test App®"
Then you can import swift file by "Test_App_-Swift.h".
Space and ® is replace by _ while you are import.
Make sure your swift class has the public declaration, and extends NSObject:
public class MySwiftClass: NSObject {
//...
}
The import should work with quotes, not brackets, if the swift class is in the same project.
if you add a Swift File first, rememeber to add swift file to your target..., in the left column
Had faced the same problem with my team when was working on project using git. One developer hasn't updated Xcode to the last version (7.3) which was required for latest Swift 2.2 version. So, compiler hasn't recognized new Swift syntax and couldn't generate interface for Swift library (projectname-swift.h).
Check if Xcode version is the latest one!
DEFINE MODULES: YES
and import "ProjectName-Swift.h" in .m file of Obj-C class
This worked for me to access Swift classes in Obj-c.
I had the same problem with #import "myProj-Swift.h" not found, Xcode 12.3, the year is 2021.
It appears that unless a bridging header has been generated, it is not possible to import myProj-Swift.h.
My (reproducible) solution, when needing to add Swift to objective-C projects is to create (File - New File - Swift file) a dummy empty Swift file in my project. Xcode then asks whether to create a bridging header, to which I answer yes. This causes a "myProj-Bridging-Header.h" file to be added to my project, which is visible in the Project Navigator.
Once this is done, the error on #import "myProj-Swift.h" disappears.
After that I can delete the dummy file, and insert the needed Swift classes into the project.
The logic of generating a visible bridging header, but leaving the -Swift.h entirely invisible escapes me entirely. Never mind the challenge of trying to find out about this in the official documentation Importing Swift into Objective-C, which (to me inaccurately) states "You don’t need to do anything special to create the generated header".
It is probably a good idea to also mind the answer from #Sandeep Bhandari to this question - who says the -Swift.h file will only be generated if the project compiles successfully.
More info also in this and this question.
I ran into this problem after duplicating an existing target. When I tried to build with the duplicated target, the "ProductName-Swift.h file not found" error appears.
After going through the build settings in the new target, I found the value of the setting "Product Name" somehow is set as the same as the target name. After setting it with the correct one the error disappeared.
If your product name is TestApp-Dev then filename will TestApp_Dev-Swift.h
You can verify by going to the following location
~/Library/Developer/Xcode/DerivedData//Build/Intermediates.noindex/yourProjectbuild/Debug-iphonesimulator/MashreqMobileApp.build/DerivedSources
If you want same file name for each build schemes then go to
Build Settings to be the same across your modules/schemes. (set it to $(PROJECT_NAME)-Swift.h).
If project name is TestApp, then the file generated will TestApp-Swift.h and it will remain same across the schemes
During development, there might be a possibility that you would have any swift class that is not completely implemented due to which there might be some syntax errors.
The swift header file will be available for use only if all the swift files are error free.
Make sure there are no syntax errors in the swift files and then try to import the swift header in the objective - c file
I faced the problem with the name of project (target). It included symbol "-". So the decision was next: if name of project is "Test-App", then name of imported class is "Test_App-Swift.h"
If you have multiple target make sure that you have build all frameworks
Xcode 11
I ran into this problem when building on Xcode 11. Took me a bit to figure out what was wrong, but essentially, I had changed the "Display Name" setting on the Target's "General" tab instead of changing directly in the Info.plist file through the "Info" tab on the Target.
This resulted in Xcode 11.5 going through an rewriting/creating a bunch of brand new custom build settings and modifying the name of the app module and the built .app product. In this case the new display name also had a forward slash (/) character in it which may ultimately be why it wasn't building (see #Silversky Technology's answer).
Regardless, I resolved this by undoing all of Xcode 11.5's automatic changes to the project file and manually making the same change to the bundle display name in the Info.plist file and everything works perfectly.
I wish it would tell you that it was doing stuff like this before it just up and does it without your consent.
Target executable was missing a dependency on my (or any other in fact) framework.
Build Phases -> Dependencies must list the dependencies of a target to avoid intermittent errors: in my case debug
build was fine and automated Jenkins CI builds were failing.
A nightmare to debug considering Jenkins output produces
voluminous garbage that's a huge time pit to get through.
I'm working on an iOS project that contains Swift and Objective-C Classes.
To instantiate an object described in Objective-C, I've understand that I needed to have a Bridging-Header file that contains all the imports of the headers I will have to use on my Swift classes. And it works great on my project.
I made all classes I needed, I subclassed Objective-C classes in Swift, everything is OK.
My problem is when it comes to do the opposite: instantiate a swift object in an Objective-C file. So I read that I need to have those options:
Define Modules as Yes
add the line #import "<#YourProjectName#>-Swift.h" on the *.m file I'm working on.
And that is what I did:
I changed all the values on the Build Settings that needed to be changed. I added the import line, I even tried to create the header file, but I still have the "<#YourProjectName#>-Swift.h" file not found error.
Of course, I replaced the YourProjectName by the actual module name, the one I found under Product Module Name in Packaging section on Build Settings. Also, there is no spaces in the Project Name.
Did I forgot a step?
Make sure you are importing the -Swift.h file from a .m Objective-C file and not a .h header file. The docs only talk about importing from .m:
... import the Xcode-generated header file for your Swift code into any Objective-C .m file you want to use your Swift code from.
The -Swift.h file is generated during the build and I've found that importing it from a .h file always fails, even when I know the file exists. Since it's generated by the build, I'm guessing it's cleaned out when the compiler is sifting through the headers and regenerated once the .swift files are compiled.