We had performed the migration of our whole repository from TFS to VSTS using OpsHub. It seemed to go ok except for some projects that it just couldn't handle. Everything looked ok, until developers were going into projects and find all the files that had been deleted from the projects. This has left all the projects and folders a mess. If you look in the history of those projects you can see the actual deletes in the changesets reflected by the file being displayed with a strike-through going over name. But looking in the folders the files are there. If this was an existing issue, was it part of some disclaimer that we missed?
Is there any way to cause those deletes to occur? We don't want to have to migrate everything again because it took weeks to get everything migrated before. I just need to find out if there are any other options.
Related
I have a big problem! I made lots of changes to my c# project on my local machine. I added, deleted, modified, etc. It's been about a week since I've checked anything in to TFS so when I did a check-in, TFS threw some errors saying it couldn't find some files (ones that I had deleted, ok that's fine).
So now what I did was really stupid!
I undid all pending changes in TFS for that project and it totally wiped everything on my local machine back to some earlier version that I had checked in last week. All my files that I had worked on this last week were gone! What do I do!? is there any way to get my recent stuff back or am I screwed?
You should be checking in frequently to avoid mistakes like this. If the files are gone from your file system, they're gone. You can see if you can use a file recovery utility to undelete them, but past that, there's no way to get them back.
I am using Visual Studio Online. I have projects which have common code that I use across a number of different solutions in different TFS projects and I also have some files which are linked from other TFS projects in some of them. In order to be able to access them all, I've changed the Workspace config so that I have just mapped $/ to a particular folder.
The problem is that I just checked in a change in one project and noticed that it also checked in a change in a completely unrelated one that wasn't part of the solution at all! How can I configure things to be able to access everything that I need to without cross-checking-in files from unrelated projects (and without having to manually exclude/include files in every check in)!?
EDIT: I've noticed that this doesn't seem to have happened again on my last couple of check ins when I also had items from other projects checked out. Wondering what caused it.
You should look at a NuGet solution for this. If you are using VSO you can use the new MyGet integration with an automated build process. If you create an automated build for the shared project output that is packaged in a NuGet package you can create a NuGet repository ion MyGet to provide it to your other solutions.
Once you have that, if you then change the shared code and check in, the build and package will kick off and deploy your new version of the package. Your other solutions will then prompt you to update automatically. You don't even need to check in the dependent assemblies as you can use NuGet Package Restore to make sure your local and build server get the right versions.
It sounds like a lot of work but once you get up to speed it only takes a few hours of investment to configure for anything you want to share or deploy in this way.
In the Pending Changes section of Team Explorer, in the Included Changes section there is a drop down. If it's set to "Show All" you'll see changes pending for all your solutions. If it's set to "Show Solution Changes" you'll just see changes pending for the current solution. (My guess is that it was set to "Show All" when you checked in your changes and that's why you got changes from other solutions checked in.)
I have a solution with a few SSIS projects, which is in TFS. I was helping a guy fix some project names to be consistent with the other projects in the solution. After updating the names, we checked in the project and the solution files. When I got latest (I tried both GetLatest and GetSpecific), TFS kept asking me to checkout those project files and it got pretty annoying and I ended up checking them out and then undid my changes on the project files.
Does anyone know why it keeps doing that?
I started work a lone developer last year and I found VSS is no longer a good option for source control so I decided to use TFS 2010 instead.
I have had to learn everything from a book - of which there are few.
I am currently creating a new build and in my workspaces I see a have 4. I want to delete one of them and rename another.
However I do not know what the consequences of doing this are. If I delete a workspace, will that remove the associated files under source control? How do I check which files these are? What happens if I change a status from active to cloaked?
As you can see, I am a beginner in all this.
Workspaces are only a mapping from SourceSontrol folders onto your local file system. Also workspace contains information about versions of the files you have locally, so when you hit 'Get Latest Version' only recent changes are sent from server to you, not the whole files. Information on what files are checked out is stored in workspace too, so if you have pending changes in the workspace and delete it then there'll be a bit of a challenge to check these changes in. Renaming of the workspace will not break anything as far as I know.
Article An introduction to TFS Workspaces may be interesting to you.
Like the others have said, the workspace only says what local files you have checked out, and the status, etc. Workspaces are pretty granulal (i.e. per user and per machine) so you could have mutliple workspaces with the same username in the same project. E.g. if you have a copy of Visual Studio at work and one at home, you could have different files checked out and you wouldn't run into any conflicts like you would have in VSS or something based on VSS Like like VSSConnect.
We've had a couple of people leave out project and have had to go in and remove their workspaces after the fact. This hasn't been a big deal in terms of any code losses but if you don't have access to the machine anymore you will have to use the TFS tools.
Try TFS Sidekicks, it provides a nice GUI to manage all the nitty-gritty back-end stuff in TFS
We've lost at least one changeset in TFS (we don't know yet if there's more, could be none). We noticed a changeset that was at the top of the list is now gone. We think there might be two at least because the symptoms below also exists for at least one other file we've discovered. Additionally, we can see a hole in the changeset numbering sequence, and we don't believe the changeset with the file described below is that one.
The single file involved had one line changed, and the version in TFS has the file before the change.
Doing a get latest or get specific version gives me the old file, before the change.
After doing the "Get specific version", in Source Explorer, in the column that shows workspace status, it says "No" indicating that the file is outdated. Nothing I've tried so far gives me the file with the change that was checked in.
If I try to view the file from the Source Explorer, it says my file is out of date and asks if I want to view the server version or the workspace version. Selecting the workspace version gives me the file before the change (probably because I did the get specific version above), selecting the server version gives me nothing, dialog just goes away.
If I check out the file, and redo the change, and try to check in, it says that a newer version exists on the server and asks me how to resolve. I can pick discard local changes or discard server changes. Since I want to check in my changes, I select to discard the server changes, but when I try to check in again (conflicts in TFS stops the checkin process), it just repeats the conflict and asks what to do.
Basically:
Changeset is gone, verified with the developer that checked it in
File does not have the change on the server
Server is confused regarding version of this file, complains about outdated version if I try to view it
Won't let me check in changes, just repeats a conflict with a newer version, presumably the file the developer checked in that for some reason is no longer available through a changeset
So... anyone had this problem? This is TFS 2008 with everything I know of updates applied, including all service packs on the developer machines, running Visual Studio 2008 Professional with Team Explorer 2008.
What do I do? Is my only recourse reverting to the nightly backup?
Edit: Things I'm trying after posting the question:
Checking disk space on server hosting the SQL Server (same as the TFS server): Plenty, 6GB free on one disk and 9GB free on another. Perhaps not plenty enough for the future, but easy to increase (virtual machines), but should not have anything to do with our current problem.
No change: Recreating a fresh workspace in a different folder on disk (I deleted them all before adding a new one), doing a "Get specific" version on root folder of project and checking the bottom two checkboxes (overwrite writeable and overwrite all), afterwards says that I have the latest file (Yes in that column I mentioned above). Viewing the file shows me file before the change. Doing a "Get specific" version on that particular file makes it turn to "No", same problem with checkin.
Solved??
I did another checkin on a totally different file, not including the file we had trouble with above, but that file was "attached" to that changeset, even though it was definitely not checked in by me when I tried this.
In other words, it looks like the part of the changeset that related to the file was still in TFS, with the right changeset id, so when another changeset appeared with the same id, that file became a part of it.
Has anyone experienced anything like this? It doesn't really improve my trust towards TFS if things like this can happen.
We still have another file that misbehaves, I will have to see if it has all of the same problems or not and what, if anything, we can do with that. If that file is related to the other changeset we seem to be missing, I don't think we can get that changeset into the database unless we fire up a SQL tool (which I'm really not going to do.)