I'm working on a game in which I have a objects that are "static" on screen so they don't react to gravity and at the same time, objects can fall from the top and collide with them. That part is all good. However, I want the collision to result in the static objects rotating based off speed/angle of the collision but not respond in any other way like flying off the screen.
Is there a way to stop the static objects bouncing away and instead just rotate in position?
Your static objects still have collision events. So you can catch those events and rotate you objects by yourself.
The other way is: use dynamic body. But when add body to them set bounce to 0; so they won't bounce. And about Gravity, you can set gravityScale to 0 to make them don't react to gravity
Remember: static objects can't move or rotate by physics. You must do it yourself. And you can stop dynamic objects from bouncing or falling with gravity by setting 'gravityScale' and 'bounce' attributes
And more, if you don't want it to get pushed, catch collision event with right phase ( belongs to yours situation ) and set it linearVelocity to (0,0)
I haven't tried it before, but maybe you can make it a dynamic object but link to a static object ( likes a wheel link to a post ). So it can't move but still rotate when collision
P/S: I did a test and it worked. Make your objects like dynamic-balls and link them to static objects. They now can't move but rotate when collision.
Related
Hello I have a physics body created within sprite kit editor, here are the settings I've set for it:
The problem is, it isn't acting "static". If another physics body bumps into it "weirdly" (for lack of a better description) it often glitches, flying all over the screen, or when I had it pinned, rotating around the pinned location. -Shouldn't this act static and never move, unless it is explicitly moved in code? I need it to have an alpha mask physics body and stand completely still (it is the ground in my scene).
I have a ship that everything is centered around and everything moves relative to it. It is a first person shooter. Right now when I fire, and the ship speeds up, it catches up to the bullets. I would like the physics world to move relative to the ship's speed so that the bullet is essentially unaffected by ship speed.
The physics engine is doing the right thing, but not the right thing for my game.
I have other elements that move relative to the ship as it moves, which move correctly now, so don't want make ship stationary and move everything else in world around it. I don't see a direct way to do this maybe there is an indirect way? Perhaps I can manually take over the positioning of the bullets. I would like to use the other parts of the physics engine for doing collisions etc so don't want to completely manually do it, but will if that is the only option.
Anyone else have any suggestions?
It sounds like your bullets are receiving air friction. This is controlled by the physics bodies "damping" property. A value of 1.0 will make it static without movement. A value of 0 will allow it to move continuously without ever stoping. The default value is 0.1 as per the Apple documents. Assign your node like so to remove the damping(air friction)...
yourNode.physicsBody.damping = 0
I'm working on a game in which the user should be able to trigger 'rods' that come out from the edge of the screen to displace elements on screen (balls). These projectiles roughly resemble pool-cues. Or perhaps pinball plungers, except that they start from the 'loaded' position (mostly offscreen), and when triggered, they eject out, then quickly retreat.
I'm unclear how I should build these with Sprite Kit.
The game uses the PhysicsEngine, and the onscreen balls should be effected both by gravity AND they should be displaced when they collide with the rods. However the rods should neither be effected by gravity, not displaced when they collide with the balls -- they should simply retreat regardless of whether they've made contact with the balls.
I realize I can set the affectedByGravity property for the rods. However because they will still displace slightly when they collide with the balls. How can I 'fix' or 'peg' them in place? Do I need to use an SKPhysicsSlidingJoint? If so, has anyone encountered any examples online? Is there a simpler way to do this?
A related physics engine, Box2D distinguishes static, kinematic, and dynamic bodies.
Kinematic bodies can move and will collide with other objects, but they are themselves not affected by dynamic bodies or forces like gravity. Thus, consider setting rod.dynamic = NO; but animate it with actions. See also here in the reference for SKPhysicsBody.
I have working implementation of drag and drop feature written in Cocos2d + Box2d for iOS. I need to port it to Sprite Kit. The logic is pretty basic:
when user touching the screen, find sprite under the finger
create mouse joint between found sprite and the scene's physics body, set joint's target to position of touch
when touches moved, update joint's target to new position
when touches ended, remove the joint
Everything is working quite well. I like the way physics is simulated when touches ends - the dragged shape has velocity dependent on dragging speed and direction, so when I left my finger from the screen while moving the sprite, it will continue moving in the same direction, but now affected by gravity and damping.
Unfortunately, I'm not able to reproduce the same effect using Sprite Kit. There is no such joint like mouse joint, but I have tried using other joint types. I almost succeeded with SKPhysicsJointFixed - I'm creating new sprite and joint between it and dragged sprite, when touches moving I'm moving the newly created sprite. Unfortunately it doesn't work like mouse joint in Cocos2d + Box2d - while dragging the sprite, its velocity always equals zero. So, every time I left my finger from the screen, the dragged sprite stops immediately and start falling affected by gravity. No matter how fast I move the finger when dragging, after releasing dragged shape, it behaves exactly the same way.
My question is how to implement mouse joint in Sprite Kit, or how to implement drag and drop feature that works like described above?
Update:
This is a box2d mouse joint example that could give you more clear view on what I am trying to implement using Sprite Kit:
http://blog.allanbishop.com/wp-content/uploads/2010/09/Box2DJointTutorial1.swf
I'm pretty new to iOS development so I guess this might not be the best way, but this is how I solved it and it seems to work pretty smooth actually.
I'm using a UIPanGestureRecognizer to handle the touch event. I set this one up in my didMoveToView: with this code:
UIPanGestureRecognizer *gestureRecognizer = [[UIPanGestureRecognizer alloc] initWithTarget:self action:#selector(handlePan:)];
An UIPanGestureRecognizer is passed to handlePan: and I check with recognizer.state == UIGestureRecognizerStateEnded if the touched stopped. This is where I want to "release" the object and "let it fly away". For doing so I needed to calculate a few things, first of all I get the velocity of the finger/touch with this code:
CGPoint velocity = [recognizer velocityInView:recognizer.view];
(I use the same method (handlePan:) with other statements for getting the right object when touch starts, and letting the object be under the finger all the time by setting the position of the object to the location of the touch when moving)
Now I know the velocity, but I still don't know how much force I need to apply to the object. You should be able to calculate the force by this formula: Force = mass * acceleration. We know the mass (object.physicsBody.mass) and we know the velocity. To get the acceleration we need the time as well because acceleration = velocity / time.
In my update: method that is called every time a new frame is to be rendered I calculate the difference between the last time a frame was about to be rendered by doing something like this:
self.delta = currentTime - self.lastTime;
self.lastTime = currentTime;
I now can calculate which force that is needed to get the object moving in the velocity I'm "dragging it in". To do this I do the following:
[self.currentNode.physicsBody applyForce:CGVectorMake(velocity.x/self.delta * self.currentNode.physicsBody.mass, -velocity.y/self.delta * self.currentNode.physicsBody.mass)];
I take velocity divided with the difference in time since last frame (self.delta) to get the acceleration, and then multiply it with the mass of the object to get the force needed to keep (or actually getting) the object moving in the same direction and in the same velocity as it was moved by my finger.
This is working for me at the moment and I hope it helps other people too, and please tell me if I got something wrong or if there is a better solution. So far I have not found any "native solution".
If the only issue is velocity, then that is simple to fix.
Subtract the current touch position from the previous touch position to get the velocity between the last and current touch. Use applyForce: to apply this velocity to the body.
In order to prevent the body from moving on its own while dragging, read out the new velocity from the body after calling applyForce: and keep it in an ivar and set the body's velocity to zero.
When the touch ends, set the body's velocity to the one you keep as an ivar.
If this doesn't work, try using applyImpulse: and/or setting the velocity before calling any of the two methods, ie:
sprite.physicsBody.velocity = bodyVelocity;
[sprite.physicsBody applyForce:touchVelocity];
bodyVelocity = sprite.physicsBody.velocity;
sprite.physicsBody.velocity = CGVectorMake(0, 0);
That way you can keep the body's velocity without losing control over it while dragging.
I'm pretty new to Box2D and cocos2d. I'm trying to do something which I thought would be pretty simple, but it is turning out to be more difficult than I had expected and I cannot find a working answer anywhere.
Basically, I want to move a b2body and rotate it to a certain point with animation.
I can get it to the correct position and rotation with:
targetBody->SetTransform(b2Vec2(10.0f,1.0f),10);
But I have no idea how to animate it there over time. I tried using cocos2d animation on the sprite used for the body, but that doesn't do anything. Any ideas?
There are a couple of ways you could do this.
You could use SetTransform every time step to update the position of the body gradually over time, in effect performing the animation yourself. The drawback with this method is that the body is 'teleporting' to the new position rather than moving, so it has no momentum, which means you can get odd results if it hits anything along the way. Still, if you know it will not hit anything or does not need to react to a collision this would be ok.
The other way is to SetLinearVelocity and SetAngularVelocity to give the body proper movement. This will keep the results of a collision realistic, and you don't need to keep updating anything every timestep. On the other hand, you will need to detect when the body has arrived at the desired position and then set the velocities back to zero, otherwise it will just keep moving. For dynamic bodies you will also need to counter gravity somehow, either by setting the gravity scale of the body to zero, or by applying an upwards force to balance gravity, or by changing the body type to kinematic during the move.
In general, you use Box2D to simulate the physical behavior of objects in relation to each other. The rules of mechanics implemented by Box2D dictate how your cocos2d CCSprites move if you continuously update the translation and rotation of your sprites according to their corresponding Box2d b2Body. You will have some kind of repeatedly invoked tick: method in which you step your Box2d world along in time, and in which you update your sprite positions according to simulation results of Box2d.
This pattern corresponds to b2Bodys of type b2_dynamicBody. Physical laws dictate the motion of the body in this case, and your sprites will follow these simulation results. This is why setting a conflicting position of a sprite by means of a CCAction or even directly will be undone almost instantaneously with the next tick:.
Solution 1: kinematic body type
However, there do exist other modes for a b2Body, and one of these is b2_kinematicBody in which the translation is no longer governed by the world but by the velocities or angular speeds you dictate through setters. So it would be one solution to work with body type b2_kinematicBody as in:
b2BodyDef bdef;
bdef.type = b2_kinematicBody;
With this you would manipulate the velocity and angular speed of a b2Body explicitly. In this case, Box2d is still responsible for moving bodies around, but according the velocities you dictate, and without any force effects of collision or gravity applied to this particular body. Also with this strategy, your CCSprites will follow b2Bodys. Setting conflicting positions for your sprites directly or by applying a CCAction would not make sense for the same reason as described above.
Solution 2: decouple sprites from Box2d
An alternative way to animating sprites would be to fully decouple those sprites from Box2d. In this case, you would simply not have any b2Body that governs the position of the sprite you are going to animate. Now, in this case, only you will dictate the position and rotation of your CCSprite, i.e. directly either through its position property or by applying a CCAction.