I did install Opennms in a VM Ubuntu on PROXMOX. Everything went well until I did change the interface IP address because the VM must work in a LAN without Internet access. Since then the opennms start correctly but the browser give me the error:
Jetty: HTTP ERROR: 503
Problem accessing /opennms/. Reason:
Service Unavailable
The problem seems to be related with the connection to Internet at the starting of opennms. When I start opens without Internet connection the server do to start correctly.
OpenNMS has a bugfix that may take care of it.
http://issues.opennms.org/browse/NMS-7683
Related
i've changed nothing within my setup and ngrok seems to have stopped working for me.
Running ngrok http -host-header=rewrite launch.localhost:80 would usually work just fine.
This is my error:
The connection to http://d678207f86ae.ngrok.io was successfully tunneled to your ngrok client, but the client failed to establish a connection to the local address launch.localhost:80.
Make sure that a web service is running on launch.localhost:80 and that it is a valid address.
The error encountered was: dial tcp: lookup launch.localhost: no such host
If I navigate to launch.localhost the docker server is running just fine.
Not too sure what kind of other information you'd need to help?
For me, it was never running before, but I was getting the same error for
ngrok http -host-header=rewrite launch.local:80
It helped when I changed it to
ngrok http -host-header=launch.local 80
I currently have a Firebird 2.5 database at a client premises, installed on a Windows 7 Pro machine (32 bit), that has multiple stations in their local network that can connect to the database, along with the local machine being able to connect with our application and IBExpert.
However, for some of our software packages, a remote connection is required (outside of the local network). This previously was working but no longer works.
When I connect with FlameRobin from my office (I'm located in a different city / different network), I receive the following error message:
IBPP::SQLException
Context: Database::Connect
Message: isc_attach_database failed
SQL Message: -923
Connection not established
Engine Code : 335544421
Engine Message :
connection rejected by remote interface.
Performing this connection attempt with IBExpert, both from my office and from other external networks fail with a same message.
However, I am getting TCP/IP communication from what I can see. Here are the details of my troubleshooting steps for the last week:
Originally, I was receiving the following error when connecting from outside the network:
"Connection not established
Connection refused by remote interface"
Since that time, we have done a restart of the router and now have the current "connection rejected by remote interface." error message.
I can telnet to the public IP through port 3050 from my office and other outside networks.
I tested port 3050 on sites like YouGetSignal.com or CanYouSeeMe.org and they appear as open.
Other ports that we communicate on publicly are open and communicating.
The site has Kaspersky antivirus installed but all tests to connect via IBExpert while Kaspersky was in sleep mode behaved the same.
Installation of Firebird 2.5 to another workstation in the same local network, pointing to port 3051 (both in Firebird.conf and in the Windows Firewall and Router) show up as being open through Telnet and CanYouSeeMe.org but again, cannot be communicated on from outside via port 3051.
IBExpert works from a workstation in the network to the server
The server currently has no entry for RemoteBindAddress in the Firebird.conf
Wireshark shows that when a connecting from outside, there are packets coming through.
The TCP/IP test in IBexpert under Communication Diagnostics for the public IP as the host and the Service show the following Test Results:
Attempt connecting to XX.YY.ZZ.AAA.
Socket for connection obtained.
Found service 'GDS_DB' at port '3050'
Connection established to host 'XX.YY.ZZ.AAA',
on port 3050.
TCP/IP Communication Test Passed!
Database path, username, and password have all been checked multiple times.
locally on the server, I've changed security of the database.FDB and the security2.FDB to have Everyone, Full Control
At this point, we have a scheduled restart of the ISP's modem happening soon, although the fact that we have full TCP/IP communication over the port makes me doubtful that this is the issue.
If anyone can lead me down any recommended next steps to debug or to any tools that are available to help in this situation, that would be greatly appreciated.
This turns out to be a networking issue. We performed the following tests:
We performed a power cycle on the ISP's modem which showed no change in behavior
We connected a laptop directly to the ISP's modem but couldn't communicate to FB even with proper port forwarding rules in place on the machine and firewall.
We ran wireshark on both sides and on connection attempts, we found many attempts to connect with retransmissions that failed.
The technical team at the client side decided to install a VPN capable router and now we're good to go. From what we found there may be some kind of ISP blocking occurring as many of the tech teams remote services were failing to connect with similar behavior.
Hopefully this post helps people in the future with remote connectivity debugging, and all of the places you can look at when you're running into this problem.
I am trying to setup Neo4j version 3.2.0 in the ubuntu server 14.04.2 LTS
Downloaded the tar and extracted the folder, edited the config file to update the port to 4444, for the time being disabled the bolt connector, listen_address to 0.0.0.0 for the http connector, authentication also disabled just to get started.
bolt connector is updated with the port 7687 even though it is disabled as i was trying earlier with it enabled.
Now when i try to connect to the http://serverip:4444/browser, it says Database access not available and shows me the login screen with host prefilled bolt://serverip:7687
Also I see this error on the console window
WebSocket connection to ws://serverip:7687/
failed: Error in connection establishment:
net::ERR_CONNECTION_TIMED_OUT
Dont understand the issues here, please help me out. I am not sure why is it trying to do a WS to the port assigned to the bolt, when it is disabled at the first place.
Regards
There's a bit of juggling going on for HTTP connector support between the browser and the driver being used, a handoff which isn't complete, and the state of things is the browser is only supporting bolt connections right now.
The javascript bolt driver is being upgraded to handle http connections, I think, so you may need to wait until the next 3.2.x release to use the http connector again.
I think this issue should be tracking it.
I'm currently running Neo4j on Google Cloud with in a Compute Engine VM running Ubuntu. The 7474 port works as expected, however I'm receiving the following message when trying to connect to server:
WebSocket connection to 'ws://<ip>:7687/' failed: Error in connection establishment: net::ERR_CONNECTION_TIMED_OUT
I checked the conf/neo4j.conf for dbms.connector.bolt.address=0.0.0.0:7687 and it's not commented out.
I checked the firewall, and there is a rule for port 7687, so what else could cause this?
Thanks in advance for the help
Update:
I was able to use the cypher-shell from the VM's command line, which connects to bolt://localhost:7687
It turns out the issue was with neither GCP nor neo4j. The company where I work for has a firewall blocking the port, and that's why I wasn't able to connect to the database using the browser. Dataflow in Compute Engine had no problem connecting to neo4j.
I have some problem with my WAMP server and I downloaded from the official website. I wanted to use only for the local server (for Chrome), without WordPress, only for HTML/CSS/JS files. The servers (Apache, PHP and MySql) and the localhost webpage has оpen, but when I try to open my projects it's giving me the error:
This webpage is not available ERR_NAME_NOT_RESOLVED: and in details:
The server at problem%201 can't be found, because the DNS lookup
failed. DNS is the network service that translates a website's name to
its Internet address. This error is most often caused by having no
connection to the Internet or a misconfigured network. It can also be
caused by an unresponsive DNS server or a firewall preventing Google
Chrome from accessing the network.
P.S. OS: Windows 8.1 Pro N