I run a successful Minecraft Tekkit modded server with computer craft on it.
I'm fairly new to lua and only know the basics, I'm trying to make a menu with pages to display the banned items list and rules list on. I've made a program with arrows that's optimized for advanced computers and monitors.
The code runs properly on my advanced computer but doesn't run on the monitor, when it shows and someone clicks the arrows it doesn't work either.
I just started using stack so I'm not sure on what to do, if you need any info please ask for it :)
The code: http://pastebin.com/gVtPeBCE
By the way I already tried using Mon.write and Mon = peripheral.wrap("top")
For those who don't have tekkit here is a computercraft emulator: https://goo.gl/J0dPq0
I'm sorry to inform you that I haven't read through all of your code. But judging based on your description, I would say that it's likely one of three issues, not including incorrect syntax as a possibility.
Note: Your question is exclusively asking about the programs ability to run on a monitor while the emulator you link to only provides the desktop ComputerCraft computers.
Peripheral
Although you already stated:
By the way I already tried using Mon.write and Mon = peripheral.wrap("top")
I would like to clarify that you can, as a way to simplify the code transition, set the peripheral function table equal to the term variable. For example: term = peripheral.wrap(string_side).
Note: When you use this method, you shouldn't execute the program with the command:
> monitor side program.
You should instead run it as a normal program with no special treatment.
I.e. > program.
Incorrect Mouse Event Detection
Simply put, when using a monitor, you're not supposed to pull for a mouse_click event. You have to pull for a monitor_touch event instead.
while true do
type, side, x, y = os.pullEvent()
if type == "monitor_touch" then
print("Monitor '"..side.."' has been pressed at "..x..", "..y.."!")
end
end
Monitor Size
This just simply means that the program you're trying to execute on the monitor takes up to much space and is therefore unusable when displayed on that size of monitor.
Suggestion: Either update your code for the monitor size or build the monitor to fit the program.
Please remember that all of these ideas might not answer your question, as the code you have provided to look over is too large and I haven't been able to find the time to experiment with it. Therefore, these are only general suggestions.
if i had to guess, it's because term is short for terminal and will auto work with computers so if you set term to be the monitor at the top of the file it should work correctly.
term = peripheral.wrap("SIDE OF MONITOR")
Put that at the top of your code and it should work. but this what i think it is after taking a look at your code (also its not that long of a code sample...)
Related
I am transmitting and receiving data using aux cable and GNU RADIO between two laptops.
I have implemented DQPSK using PSK mod block.
The problem is that while receiving I have to provide a delay, some integer value e.g 0,1,2 etc.
It is different every time.
Is there a way to dynamically check for the right delay value or any other workaround to this situation?
I have written 'start.' at the start of data being transmitted and 'end.' at the end.
I have to give a demo for this project and I dont want to manually change the delay at runtime.
I cannot find the .cc file of file sink in GNU RADIO, I can change the C++ code according my requirement but there is no such file.
Below is the screenshot of the grc file on the receive side.
Any help will be appreciated.
Since there's no way for the receiver to know when the transmitter started transmitting, it decodes stuff before there's actually anything to decode.
In essence, you need some kind of preamble or so to tell your receiver when to start – side effect of having something like that would be that you could correct some things (the two sound cards don't share the same oscillator, which leads to a symbol rate offset, and a center frequency offset).
You basically added that framing - your start. and end. strings.
I cannot find the .cc file of file sink in GNU RADIO, I can change the C++ code according my requirement but there is no such file.
It's in gr-blocks/lib; however, you shouldn't modify the file sink. Really,
I'd recommend you take the time to go through the guided tutorials, use gr_modtool to generate a general block which has a state machine that looks for the bits of your start string and drops everything before and including those, and then passes everything till it sees the stop string. That all can be done with a single state machine, and a bit of python or C++ code.
I have 3 monitors, but I don't need them all turned on all the time. I can just shut them down with power button, but I want to use their standby mode, like Windows does when we let PC idle for a while - it shuts down monitors, HDD, etc.
But of course, I wanna keep using PC and let just that monitor on standby. Others must remain on and that one doesn't wake up even with me using PC.
Is it possible to do that? It would be great to have a shortcut like Winkey+1, 2, 3 etc to shut down and wake up each monitor.
An existing app with this feature is not likely to exist, but is there a Windows API function that can control monitor state, for each monitor in a MultiMonitor system?
The display control panel applet calls SetDisplayConfig to start or stop forced projection on a particular target
You can probably use MS Detours or some other API hooking tool to inspect the usage pattern of the API while using the applet to adjust display settings.
You'll want to try Display Fusion. You should be able to do what you're asking for using Monitor configurations.
I know I'm late on this but use DDC to control your display. You can easily create hotkeys that send a command via DDC to the display to turn-off. This would be equivalent to turning off the display using the button. Works like a charm for me. The only trick is that DDC command specs vary across monitor manufacturers but its not hard to find the right codes to send with the help of google.
Ready made tools also exist for this; search for anything that is related to DDC or EDID and you should find.
Be aware though that this does not remove the display from Windows which means that apps may find their way onto displays that are off and you will be looking for them.
I have a PIC32MX340F512 board developed by another company for us, The board has a DS1338 RTCC and 24LC32A eeprom, and display unit on an I2C bus, on this bus i included a TSL2561 I2C light sensor, i wrote code in c to poll the light sensor continously , when the light sensor reaches a certain level i save the time and date and light sensor value on SD card. This all works fine but if i leave the system without exposure to light inside tunnel where incident light on one end of the tunnel is ought to be monitored the system becomes unresponsive no matter how much amount of light you apply and then if i switch power off and back on again everything starts to work normal. i am a one man development team and have been trying to find out the problem for months, i activated the watchdog timer to prevent the system from hanging but the problem still persisted. i then decided to find out if the problem is with the sensor by including a push button to activate light measurement but still when 4-5 hours elapse the PIC cant even detect a change in the the input pin. Under the impression that a hardware reset overrides anything going on i included a reset button and it also works ok for the first few hours after that the PIC doesn't seem to be responding to anything including a reset. I was getting convinced that there is nothing wrong with the firmware but also with all this happening the display unit (pic16f1933 and lcd) on the I2C shares power with the main unit and doesn't seem to be affected as it alternates between different messages constantly Does anybody have an idea what could be wrong (hardware/firmware or my sensor). I am using a 24v DC power supply purchased seperately. The PIC seems to go into a deep sleep although i dd not implement any kind of SLEEP mode in my code. Nb We use the same board for many other projects and i haven't come across such a problem . Thanks in advance.
I think you need to (if you haven't already) explore the wonderful world of in-circuit-debugging (such as with the ICD3 or PICkit 2/3). It allows you to run the processor in a special mode that lets you pause execution, see exactly which line of code is being executed, inspect variable values, and step through the code to see which parts are running and not running, or see exactly where execution takes a wrong turn. If the problem takes hours to reproduce, that's okay. You can just leave it overnight running in debug mode and hopefully it will be locked-up or 'sleeping' in the morning. At this point, you will be able to pause the processor and poke around to see if you got caught in some kind of infinite loop or something. This is often the only way to dig inside a running piece of code to see why things aren't working as you expect. But as you say, those bugs that take hours or days to manifest are the trickiest. Good luck!
It sounds like you can break up your design into two main parts, sd card interfacing, reading the rtc and reading the light sensor. If it were me I would upload a version of the code that mimics reading the light sensor but only returns fake data and see if that cures the problem. Additionally do the same with the other two modules separately and see if any of the three versions of your project not show this problem. From there just keep narrowing it down until you find the block of code thats causing problems.
if Two or more versions of your debug code show the same problem then my guess is it has to do with one of the communication protocols. I had a problem with a Pic32 silicon version blocking when using the DMA in conjunction with the SPI peripherals. So I would suggest checking the errata for your chip.
If you still cant find the problem, my only suggestion would be to check for memory leaks or arrays that are growing into reserved memory.
Hope that helps, good luck!
I've been looking at lua and lvm.c. I'd very much like to implement an interface to allow me to control the VM interpreter state.
Cooperative multitasking from within lua would not work for me (user contributed code)
The debug hook gets me only about 50% of the way there, instruction execution limits, but it raises an exception which just crashes the running lua code - but I need to be able to tweak it even further.
I want to create a system where 10's of thousands of lua user scripts are running - individual threads would not work, and the execution limits would cause headache for beginning developers, I'm going to control execution speeds too. but ultimately
while true do
end
will execute forever, and I really don't care that it is.
Any ideas, help or other implementations that I could look at?
EDIT: This is not about sandboxing pretend I'm an expert in that field for this conversation
EDIT: I do not want to use an internally ran lua code coroutine based controller.
EDIT: I want to run one thread, and manage a large number of user contributed lua scripts, an external process level control mechansim would not scale at all.
You can search for Lua Sandbox implementations; for example, this wiki page and SO question provide some pointers. Note that most of the effort in sandboxing is focused on not allowing you to execute bad code, but not necessarily on preventing infinite loops. For better control you may need to combine Lua sandboxing with something like LXC or cpulimit. (not relevant based on the comments)
If you are looking for something Lua-based, lightweight, but not necessarily 100% foolproof, then you can try running your client code in a separate coroutine and set a debug hook on that coroutine that will be triggered every N-th line. In that hook you can check if the process you are running exceeded its quotes. You also need to take care of new coroutines started as those need to have their own hooks set (you either need to disable coroutine.create/wrap or to replace them with something that sets the debug hook you need).
The code in this case may look like:
local coro = coroutine.create(client_func)
debug.sethook(coro, debug_hook, "l", 1000) -- trigger hook on every 1000th line
It's not foolproof, because it may block on some IO operation and the debug hook will not help there.
[Edit based on updated question and comments]
Between "no lua code coroutine based controller" and "no external process control mechanism" I don't think you are left with much choice. It may be that your only option is to run one VM per user script and somehow give ticks to those VMs (there was a recent question on SO on this, but I can't find it). Before going this route, I would still try to do this with coroutines (which should scale to tens of thousands easily; Tir claims supporting 1M active users with coroutine-based architecture).
The mechanism would roughly look like this: you install the debug hook as I shown above and from that hook you yield back to your controller, which then decides what other coroutine (user script) to resume. I have this very mechanism working in the Lua debugger I've been developing (although it only does it for one client script). This doesn't protect you from IO calls that can block and for that you may still need to have a watchdog at the VM level to see if it's been blocked for longer than needed.
If you need to serialize and deserialize running code fragments that preserve upvalues and such, then Pluto is probably your only option.
Look at implementing lua_lock and lua_unlock.
http://www.lua.org/source/5.1/llimits.h.html#lua_lock
Take a look at lulu. It is lua VM written on lua. It's for Lua 5.1
For newer version you need to do some work. But it's then you really can make a schelduler.
Take a look at this,
https://github.com/amilamad/preemptive-task-scheduler-for-lua
I maintain this project. It,s a non blocking preemptive scheduler for running lua code. Suitable for long running game scripts.
sorry for this little bit strange title, didn't found a better one..
I've got the following situation:
I have a PC with an RFID reader connected via USB.
I now need a program which pops up when ab transponder was scanned the the RFID reader and shows the scanned value. (The reader just simulates keystrokes)
Problem: the value of the transponder is something like 0001230431, and I can't change it. (To prefix a hotkey combination or so)
So I have thought about using a global keyboard hook, check if three zeros where typed in, capture rest of data and when the 10 digits are complete, call the application through an automation object and show the number.
But I'm not very exalted about using a global keyboard hook. Many AV programs don't like them very much, they are not so easy to handle with Delphi and I guess that's not very resource-friendly for such a little task...
So I'm looking for an alternative solution...maybe somebody has an idea?
Big thx!
ben, you can use the RegisterRawInputDevices and GetRawInputData functions.
first you must use the RegisterRawInputDevices function to register the input device to monitor and then you can retrieves the data from the input device using the GetRawInputData function.
Check theses functions too
GetRawInputDeviceList retrieves the list of input devices attached to the system.
GetRawInputDeviceInfo retrieves information on a device.
Why not make sure the Delphi app with a text edit control has focus before the scan is done? Then the keystrokes will go straight into your Delphi app.