I have 3 monitors, but I don't need them all turned on all the time. I can just shut them down with power button, but I want to use their standby mode, like Windows does when we let PC idle for a while - it shuts down monitors, HDD, etc.
But of course, I wanna keep using PC and let just that monitor on standby. Others must remain on and that one doesn't wake up even with me using PC.
Is it possible to do that? It would be great to have a shortcut like Winkey+1, 2, 3 etc to shut down and wake up each monitor.
An existing app with this feature is not likely to exist, but is there a Windows API function that can control monitor state, for each monitor in a MultiMonitor system?
The display control panel applet calls SetDisplayConfig to start or stop forced projection on a particular target
You can probably use MS Detours or some other API hooking tool to inspect the usage pattern of the API while using the applet to adjust display settings.
You'll want to try Display Fusion. You should be able to do what you're asking for using Monitor configurations.
I know I'm late on this but use DDC to control your display. You can easily create hotkeys that send a command via DDC to the display to turn-off. This would be equivalent to turning off the display using the button. Works like a charm for me. The only trick is that DDC command specs vary across monitor manufacturers but its not hard to find the right codes to send with the help of google.
Ready made tools also exist for this; search for anything that is related to DDC or EDID and you should find.
Be aware though that this does not remove the display from Windows which means that apps may find their way onto displays that are off and you will be looking for them.
Related
I need to build a web based interface for a quick personal project and I'd like to use electron.
It's essentially a kind of gaming Zoom app with lots of bells and whistles.
The problem is, I need to have a main window that will run in fullscreen, which I capture with OBS and broadcast to a popular streaming service.
I also need another window, what I refer to as the Control Panel, to control elements in the main window that I work with behind-the-scenes, for showing graphics, playing sound effects, controlling video settings etc.
If I were to code this app for a web browser, I would have absolutely no problem, as I can create the secondary window from my main window (window.open) and the 2 windows can easily refer to one another and their documents.
In electron however, windows are essentially contained boxes. Communication between 2 windows has to be channelled via ipc essentially as encoded commands and interpreted by the main process...
So to control loads of elements and entities from my control panel, I'd either have to implement a complex messaging system, which frankly seems MASSIVELY unnecessary, or to be hacky I could simply issue javascript commands as strings to the other window with BrowserWindow.webContents.executeJavaScript()... but yuck.
I could also contain all the logic-y stuff in the main process, but again, this still requires a messaging system that I don't have the time to implement.
I guess I want to know if there's a better way.
I'm just imagining a scenario win which a developer has written a web-app that uses multiple windows and lots of direct window-to-window communication, and now they need to migrate it to electron... how would they best go about it without re-writing a ton of code?
Found my answer, 'nativeWindowOpen':
main_window = new electron.BrowserWindow({
webPreferences: {
nativeWindowOpen: true
}
});
I can now use window.open() from my main window and refer directly back and forth.
So now I can do this:
control_panel = window.open("./control_panel.html", "Control Panel", "width=720,height=480")
console.log(control_panel.document)
And from the opened window:
console.log(window.opener.document)
And I can refer to variables and document elements.
I couldn't find anyone mentioning this useful 'nativeWindowOpen' option when I was scouring stackoverflow et al earlier, only found it by reading documentation.
I run a successful Minecraft Tekkit modded server with computer craft on it.
I'm fairly new to lua and only know the basics, I'm trying to make a menu with pages to display the banned items list and rules list on. I've made a program with arrows that's optimized for advanced computers and monitors.
The code runs properly on my advanced computer but doesn't run on the monitor, when it shows and someone clicks the arrows it doesn't work either.
I just started using stack so I'm not sure on what to do, if you need any info please ask for it :)
The code: http://pastebin.com/gVtPeBCE
By the way I already tried using Mon.write and Mon = peripheral.wrap("top")
For those who don't have tekkit here is a computercraft emulator: https://goo.gl/J0dPq0
I'm sorry to inform you that I haven't read through all of your code. But judging based on your description, I would say that it's likely one of three issues, not including incorrect syntax as a possibility.
Note: Your question is exclusively asking about the programs ability to run on a monitor while the emulator you link to only provides the desktop ComputerCraft computers.
Peripheral
Although you already stated:
By the way I already tried using Mon.write and Mon = peripheral.wrap("top")
I would like to clarify that you can, as a way to simplify the code transition, set the peripheral function table equal to the term variable. For example: term = peripheral.wrap(string_side).
Note: When you use this method, you shouldn't execute the program with the command:
> monitor side program.
You should instead run it as a normal program with no special treatment.
I.e. > program.
Incorrect Mouse Event Detection
Simply put, when using a monitor, you're not supposed to pull for a mouse_click event. You have to pull for a monitor_touch event instead.
while true do
type, side, x, y = os.pullEvent()
if type == "monitor_touch" then
print("Monitor '"..side.."' has been pressed at "..x..", "..y.."!")
end
end
Monitor Size
This just simply means that the program you're trying to execute on the monitor takes up to much space and is therefore unusable when displayed on that size of monitor.
Suggestion: Either update your code for the monitor size or build the monitor to fit the program.
Please remember that all of these ideas might not answer your question, as the code you have provided to look over is too large and I haven't been able to find the time to experiment with it. Therefore, these are only general suggestions.
if i had to guess, it's because term is short for terminal and will auto work with computers so if you set term to be the monitor at the top of the file it should work correctly.
term = peripheral.wrap("SIDE OF MONITOR")
Put that at the top of your code and it should work. but this what i think it is after taking a look at your code (also its not that long of a code sample...)
I'm looking to make an app be able to print out a stick on name tag based on some fields that the user has filled out. The catch is that I don't want the user to have to interact with any sort of system print dialog, I just want it to go straight to the printer and print out after they submit.
The other catch here is that this will most likely be run on an iPad, so I will need to try to send this print job over the air either on wifi, somehow to a computer that is usb connected to the printer or over airprint if I can find one that is small enough and supports the right paper.
I've seen some solutions here and there that require the app to run on windows, or to be connected to the printer some how.
I'm not sure if this feat is possible with this setup, but the most important part is being able to print in the background, if the iPad is going to hinder that, there is a case we can make to our client for getting a small, cheap, windows 8 touch tablet instead of an iPad since I know it has a few more capabilities in this area as it seems through my research.
It doesn't matter what version of ruby or rails it's in and I don't care if it's 2 steps or 200, if the user experience is there, I can make a case for the increased work load needed to make something work.
I'm not a very experienced rails developer, but this project is my first big project that is simple enough that I can tackle it. If more information about how their name tag info is being collected I can shed some light on that as well but I don't think it matters. Whatever I'm printing I need the experience to be the above.
Have a look here: http://support.vendhq.com/hc/en-us/articles/201378390-Enable-kiosk-silent-printing-for-Google-Chrome-on-Windows-Video- under 2) Kiosk printing for Google Chrome
Basically this is using Chrome's Kiosk printing mode. So you would have to get a PC for it to work.
The "print dialog" will pop up shortly but then automatically disappear the the document will print.
sorry for this little bit strange title, didn't found a better one..
I've got the following situation:
I have a PC with an RFID reader connected via USB.
I now need a program which pops up when ab transponder was scanned the the RFID reader and shows the scanned value. (The reader just simulates keystrokes)
Problem: the value of the transponder is something like 0001230431, and I can't change it. (To prefix a hotkey combination or so)
So I have thought about using a global keyboard hook, check if three zeros where typed in, capture rest of data and when the 10 digits are complete, call the application through an automation object and show the number.
But I'm not very exalted about using a global keyboard hook. Many AV programs don't like them very much, they are not so easy to handle with Delphi and I guess that's not very resource-friendly for such a little task...
So I'm looking for an alternative solution...maybe somebody has an idea?
Big thx!
ben, you can use the RegisterRawInputDevices and GetRawInputData functions.
first you must use the RegisterRawInputDevices function to register the input device to monitor and then you can retrieves the data from the input device using the GetRawInputData function.
Check theses functions too
GetRawInputDeviceList retrieves the list of input devices attached to the system.
GetRawInputDeviceInfo retrieves information on a device.
Why not make sure the Delphi app with a text edit control has focus before the scan is done? Then the keystrokes will go straight into your Delphi app.
hallo,
I have a common question, I hope it is ok to ask it here.
I have a project, where I should develop a small appliation for BlackBerry. I know Java ME is the platform to do that (Browser and Widget are other opstion).
What I need to do is a samll application which pops-up after every call and asks the user if he wants to save(assign) this conversation (only the duration in minutes of the phone call is important) in his time-tracking database. He can click NO, but after it, he can start my application and see all unassigned phone calls and still he can assign them in the time-tracking db. This should happen offline and than be synchronized with the server via online connection.
My question now:
What APIs are to be used, for handling with the phone-calls?
Are there some downsides in this kind of application, which I newby can not see at first?
What about the different devices?
Thanks for any information you share with me, to help me avoid common newby mistakes!
Thnaks a lot.
That should definitely be doable, look at the PhoneListener interface to check when the phone call disconnects. What I would do is write the application as a system module, that will run in the background on startup. You can use an alternate entry point so that when the user clicks on your icon the application will create a GUI.
Edit: By the way BlackBerry uses an extended version of J2ME. You can ignore all the RIM specific extensions if you want and develop an app that will (theoretically) work on any J2ME device but you won't be able to use a lot of nice features including the PhoneListener interface. I doubt you'll be able to create this specific application with J2ME alone.