Hello I am using here UIWebView and load request for map . Now I have all done successfully but when I run app first time then Pop up show, I am attaching image here
Now I want to ask how to access this pop up actions (Don't allow and oK) ,because this is by default generated first time when we app run. I don't know how to access "Ok" button I want to write some code on "Ok" button.
So please anyone tell me how to access these pop up buttons in my case.
Implement CLLocationManagerDelegate Protocol to get call back event for that alert button pressed by authorization status.
locationManager:didChangeAuthorizationStatus:
Tells the delegate that the authorization status for the application changed.
- (void)locationManager:(CLLocationManager *)manager didChangeAuthorizationStatus:(CLAuthorizationStatus)status
There are various authorization status provided mention as follows :
typedef enum {
kCLAuthorizationStatusNotDetermined = 0,
kCLAuthorizationStatusRestricted,
kCLAuthorizationStatusDenied,
kCLAuthorizationStatusAuthorized,
} CLAuthorizationStatus;
kCLAuthorizationStatusNotDetermined
The user has not yet made a choice regarding whether this app can use location services.
kCLAuthorizationStatusRestricted
This app is not authorized to use location services. The user cannot change this app’s status, possibly due to active restrictions such as parental controls being in place.
kCLAuthorizationStatusDenied
The user explicitly denied the use of location services for this app or location services are currently disabled in Settings.
kCLAuthorizationStatusAuthorized
This app is authorized to use location services.
You can edit the message that is shown on UIAlertView, but you can not access the control of ok button, because iOS don't provide a delegate to access this button.
The alert is only shown for the first time, you launch the app and not after that.
You can only control the condition to present this alert but you cannot control the ok button
Related
I do have a situation where I need to get current location of iPhone 5 running iOS8. When the location services is off, the default location service alert open up. This alert has 'Cancel' and 'Settings' button. Please find below the screenshot of the alert.
I need to handle the situation when user pressed cancel on the alert. I can handle it when I override the alert. But that alert isn't working for me, as settings of that custom alert takes me to the app level location settings and not device level location settings.
Set the delegate for your CLLocationManager and implement the delegate's method
- locationManager:didChangeAuthorizationStatus:
This method is called whenever the application’s ability to use location services changes. Changes can occur because the user allowed or denied the use of location services for your application or for the system as a whole.
If the authorization status is already known when you call the requestWhenInUseAuthorization or requestAlwaysAuthorization method, the location manager does not report the current authorization status to this method. The location manager only reports changes to the authorization status. For example, it calls this method when the status changes from kCLAuthorizationStatusNotDetermined to kCLAuthorizationStatusAuthorizedWhenInUse.
Link to Apple doc
When my app is launched it requests to use location services.
If a user selects 'Don't Allow' I prompt again letting them know that Location Services are required for the best experience and they can enable in the settings app.
If a user does not allow and still creates an account, the main screen will not fully function without the location feature part.
From this point, if I manually enable in the Settings app I'm still not getting the main page to pick up the current location.
How do I detect that location services have been enabled from the Settings App?
Is there a method I need to enforce again from the AppDelegate?
You can tell if location has been enabled for your app using CLLocationManager.AuthorizationStatus, which returns a member of the CLAuthorizationStatus enum. If location is disabled completely, your app won't be authorized, so you know everything you need to know.
let authorization = CLLocationManager.authorizationStatus()
if authorization == .AuthorizedWhenInUse || authorization == .Authorized {
...
}
If you request authorization using CLLocationManager and the user denies it, you can't cause the window to come up again.
From a UX point of view, be careful about nags as well. Communicate clearly that your app benefits from using location, but try to avoid browbeating the user about it.
See also how to determine when settings change on ios to have your app retry location access right after a user (hopefully) enabled it.
When the user launches the app for the first time and attempts to login, they are prompted with the iOS dialog - "Turn On Location Services".
I need to capture when the user clicks "cancel". Is there a Notification sent? If so, what is its name? I've been unable to locate it.
The CLAUthorizationStatus is kCLAuthorizationDenied when Location Services are Disabled OR the user clicked "Don't allow". When the user clicks "Cancel", it does not fire the authorizationChange event. When user clicks "Cancel", the app just hangs.
Short answer: You can't catch that notification. You can infer about the user choice and act consequently by using CLLocationManager methods (the longer answer below).
Longer answer:
Firstly, welcome on Stack Overflow. Before kindly posing your question, and trying to be collaborative with people that are here to help, it's a good idea to search if somebody else previously posed the same question.
A brief search gave (just to mention some of them):
How to handle “Cancel” button on Alert pop up for Location services
How to get location services to reprompt the user for location permission if they accidentally refused it?
locationManager:didFailWithError: not called if user Location Services are off
How to prompt user to turn on Location Services…again
How can I prompt the user to turn on location services after user has denied their use
How to ask permission from user for second time to allow to access the current location?
Now, let's try to summarize them all, starting from iOS docs:
If your app relies on location services to function properly, you should include the UIRequiredDeviceCapabilities key in the app’s Info.plist file. You use this key to specify the location services that must be present in order for your app to run. The App Store uses the information in this key from preventing users from downloading apps to devices that do not contain the listed features.
Important: If your app uses location services but is able to operate successfully without them, do not include the corresponding strings in the UIRequiredDeviceCapabilities key.
So, if your app really needs to access the user's position you should add location-services and eventually gps to UIRequiredDeviceCapabilities.
Then, somewhere in your code - when needed, you have to check if the location services are enabled.
[CLLocationManager locationServicesEnabled]
they may be disallowed for three reasons:
The user can disable location services in the Settings app.
The user can deny location services for a specific app.
The device might be in Airplane mode and unable to power up the necessary hardware.
You are interested in the second case: the user refused to allow your app to use the location services.
Again, from the docs:
Important: In addition to hardware not being available, the user has the option of denying an application’s access to location service data. During its initial uses by an application, the Core Location framework prompts the user to confirm that using the location service is acceptable. If the user denies the request, the CLLocationManager object reports an appropriate error to its delegate during future requests. You can also check the application’s explicit authorization status using the authorizationStatus method.
[CLLocationManager authorizationStatus]
That may return:
kCLAuthorizationStatusNotDetermined if the user has not yet made a choice regarding whether this application can use location services.
kCLAuthorizationStatusRestricted this application is not authorized to use location services. The user cannot change this application’s status, possibly due to active restrictions such as parental controls being in place.
kCLAuthorizationStatusDenied The user explicitly denied the use of location services for this application or location services are currently disabled in Settings.
kCLAuthorizationStatusAuthorized This application is authorized to use location services.
If[CLLocationManager locationServicesEnabled] returns NO and you attempt to start location services anyway (i.e. calling [locationManager startUpdatingLocation]), the system prompts the user to confirm whether location services should be re-enabled. Given that location services are very likely to be disabled on purpose, the user might not welcome this prompt.
I suppose you know, and did all the previous steps (I'm only sure you checked the authorizationStatus). You refused to show us the significant code of your app so I can only suppose the overall logic behind. Now you said your app hangs. This should be because you didn't catch the error properly? Catching the error is the way to re-prompt the user, if you wish.
After calling [locationManager startUpdatingLocation], if not authorized, your delegate should define a locationManager:didFailWithError: in order to catch the kCLErrorDenied.
- (void)locationManager:(CLLocationManager *)manager didFailWithError:(NSError *)error
You may show, at this point, a UIAlert to insist asking the user to give you access to its position, or trigger a change in the UI or whatever you like.
Final notes
I hope you understand why I was asking for the code: the reason was to offer you an alternative solution instead of reply "You can't catch the 'Cancel' notification".
If this answer does not satisfy your question please elaborate why you need to catch the pushing of the "Cancel"/"Do not allow" button, so we can provide alternatives.
Clearly my advice is to not annoy people to death by continuously ask them for enabling location services if they don't want.
Post scriptum: Maybe that the answer looks pedantic and obvious in certain parts if not all to you, but we are here to provide answers also for future readers.
If we try to access the user's location, iOS will tell the user that our application wants to use their location.
If I do this
[locationManager startUpdatingLocation];
An alert will show.
However, that only happens once.
It looks like some variable or default must have been set up once that display pops out.
How do I reset those default so that next time my app wants to use location users will be asked again?
Google map can displays that again and again.
It's Apple that asks them for permission, not you
Translation: You don't have any control over that part of the process. The little popup:
is only shown by Apple when you first ask for it - so the user always feels in control. After they accept for the first time, Apple assumes they are OK with your app getting their location information from their device, and won't show it again*.
*Unless they specifically go into Settings and disable Location Services for you app.
It's only showed on the first time and there's nothing you can do to change that. What you can do is ask your users to allow it on settings.
You can check if your app has permissions by checking:
[CLLocationManager locationServicesEnabled]
From the docs:
The user can enable or disable location services from the Settings application by toggling the Location Services switch in General.
You should check the return value of this method before starting location updates to determine whether the user has location services enabled for the current device. If this method returns NO and you start location updates anyway, the Core Location framework prompts the user to confirm whether location services should be reenabled.
I have an application that uses the CoreLocation API. If the Location services is turned off , when i launch the application, It shows an alert saying that "Turn on Location Services " with "Settings" and "Cancel" Button. When the user Taps on Cancel , application should pop the current ViewController. Is there any way to handle when the user taps on "Cancel"?
Call +[CLLocationManager authorizationStatus]. It returns a value described here (under CLAuthorizationStatus). Also, check +[CLLocationManager locationServicesEnabled], which returns YES if location services are enabled.
You should use these methods before you call any CoreLocation method. Prompt the user accordingly.
You need to allocate CLLocationManager and handle +(CLAuthorizationStatus)authorizationStatus accordingly.
You can either call it from your AppDelegate or from you r ViewController.