i count the require lable size using below code
CGSize expectedLabelSize = [text sizeWithFont:instructions.font
constrainedToSize:instructions.frame.size
lineBreakMode:UILineBreakModeWordWrap];
i count the number ofline of lable using below code
int numberofline = ceil(lable.frame.size.height / font.lineHeight);
in my case i require only 3 line on the button click the hole text display in tableview...due to modifing the cell height...
//please help me to check how to get number of characters for given font family....
![this is demo image][1]
see image on following link
[click to view image demo][1]
set property of UILable noOfLines = 0 which is by default 1. this will automatically increase your number of line .
Related
I have a single line UILabel. It has width = screen width and the content now is (the content of UILabel can change)
You have 30 seconds to make an impression during an interview
Currently, my UILabel is truncated tail and the word "duration" is not complete
self.nameLabel.lineBreakMode = NSLineBreakByTruncatingTail;
What I want is I want my UILabel still truncating tail and only display complete word.
Like the image below
Any help or suggestion would be great appreciated.
You can do something like this:
let labelWidth = CGRectGetWidth(label.bounds)
let str = "You will have 30 seconds till you give us a good impression" as NSString
let words = str.componentsSeparatedByString(" ")
var newStr = "" as NSString
for word in words{
let statement = "\(newStr) \(word) ..." as NSString
let size = statement.sizeWithAttributes([NSFontAttributeName:label.font])
if size.width < labelWidth {
newStr = "\(newStr) \(word)"
}
else{
break
}
}
newStr = newStr.stringByAppendingString(" ...")
self.label.text = newStr as String
Idea is: we split words and try check the width while appending from the beginning + the string "..." till we found the a word that will exceed the size, in the case we stop and use this new string
Ideally this is not possible,with default UILabel, when you set lineBreakMode to TruncatingTail, depending on the space required by the letter/word the OS will truncate it, one solution to fix the issue you can use following properties depending on your match.
Minimum Font Scale -- Use this property to specify the smallest multiplier for the current font size that yields an acceptable font size to use when displaying the label’s text. If you specify a value of 0 for this property, the current font size is used as the smallest font size.
Minimum Font Size -- When drawing text that might not fit within the bounding rectangle of the label, you can use this property to prevent the receiver from reducing the font size to the point where it is no longer legible.
i am not sure but try it:
nameLabel.adjustsFontSizeToFitWidth = NO;
nameLabel.lineBreakMode = NSLineBreakByWordWrapping;
OR
If you are using storyboard follow these steps i tried this and it working fine
Open Attribute Inspector
Change Line Breaks to Truncate Tail then
Change AutoShrink to Minimum Font Size
here are my screenshots of label after and before applying these properties
new output
I have a UILabel carefully laid out in Interface Builder with proper height and width constraints. The number of lines is set to 4. The wrapping is set to word wrap. The text is "CHECKED". The font size is very large and thus it only fits "CHECKE" and the "D" is on the second line. Writing "Checked" instead of "CHECKED" lets the font shrink (as intended) so that the whole word fits. But (the text is user given and it can be expected that the user writes fully uppercase words) having uppercase words the label does not break it/shrink the font as expected.
Do you have a suggestion as to what I might have missed? Capitalising the words (thusly only having the first letter uppercase) does work, but is not what the client wants.
Updated question
The problem seems to be unrelated to having uppercase or lowercase text. My problem could be solved by an answer to the following question:
How to make (ideally with the help of only Interface Builder) the UILabel text shrink trying to fit full words within all available lines without wrapping the text mid-word?
If the text "CHECKED" is too wide for a label (with more than 1 line available) it should shrink the font size instead of breaking the "D" and wrapping the single letter to the next line.
If the text is "one CHECKED two" and the single word "CHECKED" is already too wide for a label (with more than 1 line available) it should break between all words and shrinking the font size so that "CHECKED" still fits the middle line.
Avoiding:
one
CHECKE
D two
Thank you very much!
Here is a UILabel subclass that will find the largest word in the labels text, use the boundingRect function of NSString to see how large that one word will be with the current font, and drop the font size until it fits the width.
class AutosizingMultilineLabel: UILabel {
override func layoutSubviews() {
super.layoutSubviews()
self.adjustFontToFitWidth()
}
func adjustFontToFitWidth() {
guard let currentFont = self.font else { return }
let minimumFontSize: CGFloat = floor(self.minimumScaleFactor * currentFont.pointSize)
var newFontSize = currentFont.pointSize
var theNewFont = currentFont
if let text = self.text, let longestWord = text.components(separatedBy: " ").max(by: {$1.count > $0.count})?.replacingOccurrences(of: "\n", with: "") {
let nsString = longestWord as NSString
while newFontSize > minimumFontSize {
theNewFont = currentFont.withSize(newFontSize)
let boundingRect = nsString.boundingRect(with: CGSize(width: CGFloat.greatestFiniteMagnitude, height: CGFloat.greatestFiniteMagnitude),
options: NSStringDrawingOptions.usesLineFragmentOrigin,
attributes: [.font: theNewFont],
context: nil)
if ceil(boundingRect.size.width) <= self.bounds.size.width {
break
}
newFontSize -= 1
}
self.font = theNewFont
}
}
}
When the word is bigger than the line, word wrap doesn't work. If it doesn't fit on this line, it won't fit on the next line. (same word, same size, same line size). To make it fit, the label will start putting letters on the next line.
If you allow multiple lines on your label, the OS will try to fill the lines before adjusting the font size.
I think you're just running into a limitation on Autoshrink.
In Interface Builder:
add a new UILabel with Width: 230 and Height: 280
set the Font to System 44.0
set Line Break: Truncate Tail
set Autoshrink: Minimum Font Scale at 0.15
set the text of the label to test CHECKED lines
Now, drag the handle on the right edge of the label left and right... when it gets too narrow, the word CHECKED will break onto the next line.
Change CHECKED to checked and do the same thing. You should see the same behavior.
Now, try dragging the Bottom edge up and down. With either CHECKED or checked, you should see the Font Size auto shrink.
So... to do what you're trying to do, you might have to skip Autoshrink and instead do some code calculations.
Edit: further visual of what goes on...
Start with above values, but set the Height of the label to 170 - gives it just a little vertical padding.
Now, drag the left edge to make it narrower.
When you reach the end of the word CHECKED, and keep going, you will see the font shrink until it gets small enough that there is space for it to wrap to a 4th line.
I think you're going to need some code to get exactly what you need.
I have a single line UILabel. It has width = screen width and the content now is (the content of UILabel can change)
You have 30 seconds to make an impression during an interview
Currently, my UILabel is truncated tail and the word "duration" is not complete
self.nameLabel.lineBreakMode = NSLineBreakByTruncatingTail;
What I want is I want my UILabel still truncating tail and only display complete word.
Like the image below
Any help or suggestion would be great appreciated.
You can do something like this:
let labelWidth = CGRectGetWidth(label.bounds)
let str = "You will have 30 seconds till you give us a good impression" as NSString
let words = str.componentsSeparatedByString(" ")
var newStr = "" as NSString
for word in words{
let statement = "\(newStr) \(word) ..." as NSString
let size = statement.sizeWithAttributes([NSFontAttributeName:label.font])
if size.width < labelWidth {
newStr = "\(newStr) \(word)"
}
else{
break
}
}
newStr = newStr.stringByAppendingString(" ...")
self.label.text = newStr as String
Idea is: we split words and try check the width while appending from the beginning + the string "..." till we found the a word that will exceed the size, in the case we stop and use this new string
Ideally this is not possible,with default UILabel, when you set lineBreakMode to TruncatingTail, depending on the space required by the letter/word the OS will truncate it, one solution to fix the issue you can use following properties depending on your match.
Minimum Font Scale -- Use this property to specify the smallest multiplier for the current font size that yields an acceptable font size to use when displaying the label’s text. If you specify a value of 0 for this property, the current font size is used as the smallest font size.
Minimum Font Size -- When drawing text that might not fit within the bounding rectangle of the label, you can use this property to prevent the receiver from reducing the font size to the point where it is no longer legible.
i am not sure but try it:
nameLabel.adjustsFontSizeToFitWidth = NO;
nameLabel.lineBreakMode = NSLineBreakByWordWrapping;
OR
If you are using storyboard follow these steps i tried this and it working fine
Open Attribute Inspector
Change Line Breaks to Truncate Tail then
Change AutoShrink to Minimum Font Size
here are my screenshots of label after and before applying these properties
new output
Right now, I'm using the following code to display my table cell. It is displaying text properly. However, there are some texts which are too long, so I want to display the first 5 lines of the text and then if the user expands the cell, it will display the whole text. I'm stuck because I am not so familiar with the new method in ios 7, boundRectWithSize.
CGSize size = CGSizeMake(self.reviewComments.width,999);
CGSize textRect =[self.reviewComments.text boundingRectWithSize: size options: NSStringDrawingUsesLineFragmentOrigin
attributes: #{NSFontAttributeName:self.reviewComments.font} context: nil].size ;
float height = textRect.height;
self.reviewComments.height = height;
I tried:
if (height > 150) {
height = 150;
}
But this way just cuts off the text, even after when I expand it.
UPDATE/EDIT:
I want my cell so that it only displays maybe the first 5 lines of the text if it exceeds 5 lines. The entire text will appear if the cell is expanded.
Try this:
float height = ceilf(textRect.height);
I'm developing an iOS 4 application with latest SDK and XCode 4.2.
I use a web service to retrieve some text data. I don't know its length so I will need to split that strings to fit inside a custom UITableViewCell.
This custom UITableViewCell will have an UILabel. And this label will be filled up with the text retrieved from web service.
The text will be country names: Spain, France, USA, Italy, etc. I will process this names to append them to a unique string. I will do it this way: "Spain - France - USA - ...".
One of my problems was that this line could be so long, and I need to split it into lines to fits UILabel width. I have solve this problem, checking every time I add a ' - ' if the string will get bigger than UILabel width. So, I will have a string like this: "Spain - France\nUSA - ...".
Ok. Now, I have a string with \n that will fit inside UILabel. So, I will need to modify UITableViewCell height to fits with UILabel height.
But, when I use [NSString sizeWithFont:[UIFont systemFontOfSize:kFontSize]]; I'm not getting the real height, I'm always getting 21.0f.
I've found this tutorial about UITableView Dynamic Height, but I don't know how to use it with my code.
In a nutshell, I need to append ' - ' character to country names, but it there is a return carried (because the string will be rendered in another line by UILabel), I don't have to append ' - '. And, when I get this string, I will have to resize custom UITableViewCell to UILabel height.
Any clue?
Is that something you are looking for?
//create a CGFloat variable
CGFloat _height = 0;
//find out the size for your text. Instead of 255 insert the width of your label
CGSize _textSize = [yourString sizeWithFont:[UIFont systemFontOfSize:kFontSize] constrainedToSize:(CGSize) { 255, 9999 }];
//add the height of that CGSize variable to your height in case you will need to add more values
_height += _textSize.height;
//eventually some other calculations
Hope it helps