Currently I'm experiencing a strange behavior. I removed the auto resizing mask from a view for viewForHeaderInSection. When I'm doing this the app crashes because I tried to remove a constraint which is nil.
I'm creating the concerned constraints in viewDidLoad in my parent controller. In debug mode I found out that when the system tries to create a constraint where my child view controller is involved (which has the removed auto resizing mask from the section header view) it directly jumps to updateViewConstraints. Of course the constraints are nil because the weren't created yet.
If I add again the auto resizing mask the app works, but I can't do what I'm trying to do (to layout my views correctly).
If I create my constraints in updateViewConstraints the app also works.
I don't understand why this is happening. On a similar view controller it is working without problems. Sometimes I think auto layout is more a pain than a gain. On a server error an alert was displayed. Here the view could be correctly loaded. Seems that this is a kind of timing problem.
I want to know why this is happening and how should I proceed in future that such an error doesn't happen anymore. Am I doing something wrong?
Edit:
Don't know if it helps but if I call setNeedsLayout and layoutIfNeeded on the view of my child view controller in viewDidLoad of my parent then also the app crashes.
Edit 2:
Seems that it occurs when I add multiple views with constraints on different places to my view controller. For my table I add an empty message if there are currently no entries. If I don't add the label as subview to my table everything works fine.
So when I'm allowed to add my constraints? Currently I add them right after the view was added as subview. For the empty message it is in viewDidLoad and for the section header it is viewForHeaderInSection. Do I have to use something like setNeedsLayout?
Edit 3:
Adding a subview to the table view isn't a good idea at all (especially when using auto layout). For now I'm using the background view, but that's not the solution I'm looking for.
You do not need to change the value of translatesAutoresizingMaskIntoConstraints unless you actually have set the autoresizingMask to something other than 0. If you are using constraints, the solution is to completely ignore autoresizingMask and translatesAutoresizingMaskIntoConstraints.
Now I got the same problem again. My workaround didn't worked:
// on iOS 7 this would bring "Auto Layout still required after executing -layoutSubviews. UITableView's implementation of -layoutSubviews needs to call super." and the app crashes
// on iOS 8 this is needed, otherwise "Unable to simultaneously satisfy constraints."
// bug?
if (UIDevice.CurrentDevice.CheckSystemVersion (8, 0)) {
sectionHeader.TranslatesAutoresizingMaskIntoConstraints = false;
}
What I've found out so far is that it has to do with the headerview and the empty message (view). When both are used I get this problem. Either the app crashes or I get
Unable to simultaneously satisfy constraints
depending if I have the autoresizing mask turned off or not. Interestingly, only iOS 8 made this problem with my workaround. A solution would be to set a boolean variable in viewDidLoad if the constraints have been set up and check for this in updateViewConstraints. But I wanted to know the real cause for this and not using a workaround for a workaround ...
Every time I retrieve new data for my table I checked if the number of records is zero or not. If they were zero I showed my empty message. The problem seems to be caused by the reloadData, which I called before this check. Than UITableViewHeaderFooterContentView got a height of zero from the NSAutoresizingMaskLayoutConstraint. Restructuring my code to this variant
if (myList.Count == 0) {
this.TableView.BackgroundView = emptyMessage;
this.TableView.SeparatorStyle = UITableViewCellSeparatorStyle.None;
} else {
this.TableView.BackgroundView = null;
this.TableView.SeparatorStyle = UITableViewCellSeparatorStyle.SingleLine;
if (emptyMessage != null) {
emptyMessage.RemoveFromSuperview ();
}
}
// call this afterwards!
TableView.ReloadData();
seems to solve my issue.
Related
I need to load a UIView from Nib and render it to a PDF (it's an Invoice). So I load the custom UIView invoiceView from a Nib and set it up (set various labels in it).
After setting the labels, I have to force the view to layout itself so that various UI elements resize/reposition themselves correctly.
Calling:
invoiceView.updateConstraints()
doesn't do anything.
Calling:
invoiceView.layoutSubviews()
messes everything up.
Here's what I have already tried:
Setting frame of the invoiceView (doesn't have any effect).
Setting the frame and adding the invoiceView to the current view hierarchy:
self.view.addSubview(invoiceView)
sets up everything correctly. However I do not want to do it. I want to force the view to layout itself correctly (using the layout constraints). What am I doing wrong? What methods should I call on invoiceView so that it is laid out correctly without adding it to the current view hierarchy?
PS: the code has been typed from memory. please ignore typos.
try
invoiceView.setNeedsLayout()
invoiceView.layoutIfNeeded()
In my xib file, I have a constraint for height for the label in my xib file.
And in my objective c, I tried to change it using
self.heightConstraint.constant = newHeight;
But nothing is changed when I run it in simulator. I have used debugger and make sure that line is executed. And in Spark tool, I see the label height is the old height.
How can I adjust the height dynamically?
Updated:
I have changed my code to add a nil check.
if (self.heightConstraint != nil) {
self.heightConstraint.constant = newHeight;
}
My code still get executed, but nothing get changed.
There's nothing wrong with your code itself:
self.heightConstraint.constant = newHeight;
But the reason this changes nothing in your interface, even though it is being executed, is that self.heightConstraint is not a reference to a constraint in your interface. (It is probably nil.)
I agree with Matt. The likely reason your code isn't working is that you have a broken outlet link. In general, when code that tries to do something with an outlet or action doesn't work, the most likely cause is a broken outlet or action connection.
Rule of thumb: When debugging stereo or computer hardware, check the cables.
Corollary for for iOS or Mac OS apps in Xcode: When debugging UI code, check your IBOutlet and IBAction connections.
At what part of the view controller lifecycle are you changing the constraints? You may need to call setNeedsLayout on the parent view.
I've set up multiple sets of constraints in IB, and I'd like to programmatically toggle between them depending on some state. There's a constraintsA outlet collection all of which are marked as installed from IB, and a constraintsB outlet collection all of which are uninstalled in IB.
I can programmatically toggle between the two sets like so:
NSLayoutConstraint.deactivateConstraints(constraintsA)
NSLayoutConstraint.activateConstraints(constraintsB)
But... I can't figure out when to do that. It seems like I should be able to do that once in viewDidLoad, but I can't get that to work. I've tried calling view.updateConstraints() and view.layoutSubviews() after setting the constraints, but to no avail.
I did find that if I set the constraints in viewDidLayoutSubviews everything works as expected. I guess I'd like to know two things...
Why am I getting this behavior?
Is it possible to activate/deactivate constraints from viewDidLoad?
I activate and deactivate NSLayoutConstraints in viewDidLoad, and I do not have any problems with it. So it does work. There must be a difference in setup between your app and mine :-)
I'll just describe my setup - maybe it can give you a lead:
I set up #IBOutlets for all the constraints that I need to activate/deactivate.
In the ViewController, I save the constraints into class properties that are not weak. The reason for this is that I found that after deactivating a constraint, I could not reactivate it - it was nil. So, it seems to be deleted when deactivated.
I do not use NSLayoutConstraint.deactivate/activate like you do, I use constraint.active = YES/NO instead.
After setting the constraints, I call view.layoutIfNeeded().
Maybe you could check your #properties, replace weak with strong.
Sometimes it because active = NO set self.yourConstraint = nil, so that you couldn't use self.yourConstraint again.
override func viewDidLayoutSubviews() {
// do it here, after constraints have been materialized
}
I believe the problem you are experiencing is due to constraints not being added to their views until AFTER viewDidLoad() is called. You have a number of options:
A) You can connect your layout constraints to an IBOutlet and access them in your code by these references. Since the outlets are connected before viewDidLoad() kicks off, the constraints should be accessible and you can continue to activate and deactivate them there.
B) If you wish to use UIView's constraints() function to access the various constraints you must wait for viewDidLayoutSubviews() to kick off and do it there, since that is the first point after creating a view controller from a nib that it will have any installed constraints. Don't forget to call layoutIfNeeded() when you're done. This does have the disadvantage that the layout pass will be performed twice if there are any changes to apply and you must ensure that there is no possibility that an infinite loop will be triggered.
A quick word of warning: disabled constraints are NOT returned by the constraints() method! This means if you DO disable a constraint with the intention of turning it back on again later you will need to keep a reference to it.
C) You can forget about the storyboard approach and add your constraints manually instead. Since you're doing this in viewDidLoad() I assume that the intention is to only do it once for the full lifetime of the object rather than changing the layout on the fly, so this ought to be an acceptable method.
You can also adjust the priority property to "enable" and "disable" them (750 value to enable and 250 to disable for example). For some reason changing the active BOOL didn't had any effect on my UI. No need for layoutIfNeeded and can be set and changed at viewDidLoad or any time after that.
The proper time to deactivate unused constraints:
-(void)viewWillLayoutSubviews{
[super viewWillLayoutSubviews];
self.myLittleConstraint.active = NO;
}
Keep in mind that viewWillLayoutSubviews could be called multiple times, so no heavy calculations here, okay?
Note: if you want to reactive some of the constraints later, then always store strong reference to them.
When a view is being created the following life cycle methods are called in order:
loadView
viewDidLoad
viewWillAppear
viewWillLayoutSubviews
viewDidLayoutSubviews
viewDidAppear
Now to your questions.
Why am I getting this behavior?
Answer: Because when you try to set the constraints on the views in viewDidLoad the view does not have its bounds, hence constraints cannot be set. It's only after viewDidLayoutSubviews that the view's bounds are finalized.
Is it possible to activate/deactivate constraints from viewDidLoad?
Answer: No. Reason explained above.
I have found as long as you set up the constraints per normal in the override of - (void)updateConstraints (objective c), with a strong reference for the initiality used active and un-active constraints. And elsewhere in the view cycle deactivate and/or activate what you need, then calling layoutIfNeeded, you should have no issues.
The main thing is not to constantly reuse the override of updateConstraints and to separate the activations of the constraints, as long as you call updateConstraints after your first initialization and layout. It does seem to matter after that where in the view cycle.
I see different examples where constraints are set. Some set them in viewDidLoad / loadView (after the subview was added). Others set them in the method updateViewConstraints, which gets called by viewDidAppear.
When I try setting constraints in updateViewContraints there can be a jumpiness to the layout, e.g. slight delay before the view appears. Also, if I use this method, should I clear out existing constraints first i.e. [self.view [removeConstraints:self.view.constraints]?
I set up my constraints in viewDidLoad/loadView (I'm targeting iOS >= 6). updateViewConstraints is useful for changing values of constraints, e.g. if some constraint is dependent on the orientation of the screen (I know, it's a bad practice) you can change its constant in this method.
Adding constraints in viewDidLoad is showed during the session "Introduction to Auto Layout for iOS and OS X" (WWDC 2012), starting from 39:22. I think it's one of those things that are said during lectures but don't land in the documentation.
UPDATE: I've noticed the mention of setting up constraints in Resource Management in View Controllers:
If you prefer to create views programmatically, instead of using a
storyboard, you do so by overriding your view controller’s loadView
method. Your implementation of this method should do the following:
(...)
3.If you are using auto layout, assign sufficient constraints to each of
the views you just created to control the position and size of your
views. Otherwise, implement the viewWillLayoutSubviews and
viewDidLayoutSubviews methods to adjust the frames of the subviews in
the view hierarchy. See “Resizing the View Controller’s Views.”
UPDATE 2: During WWDC 2015 Apple gave a new explanation of updateConstraints and updateViewConstraints recommended usage:
Really, all this is is a way for views to have a chance to make changes to constraints just in time for the next layout pass, but it's often not actually needed.
All of your initial constraint setup should ideally happen inside Interface Builder.
Or if you really find that you need to allocate your constraints programmatically, some place like viewDidLoad is much better.
Update constraints is really just for work that needs to be repeated periodically.
Also, it's pretty straightforward to just change constraints when you find the need to do that; whereas, if you take that logic apart from the other code that's related to it and you move it into a separate method that gets executed at a later time, your code becomes a lot harder to follow, so it will be harder for you to maintain, it will be a lot harder for other people to understand.
So when would you need to use update constraints?
Well, it boils down to performance.
If you find that just changing your constraints in place is too slow, then update constraints might be able to help you out.
It turns out that changing a constraint inside update constraints is actually faster than changing a constraint at other times.
The reason for that is because the engine is able to treat all the constraint changes that happen in this pass as a batch.
I recommend creating a BOOL and setting them in the -updateConstraints of UIView (or -updateViewConstraints, for UIViewController).
-[UIView updateConstraints]: (apple docs)
Custom views that set up constraints themselves should do so by overriding this method.
Both -updateConstraints and -updateViewConstraints may be called multiple times during a view's lifetime. (Calling setNeedsUpdateConstraints on a view will trigger this to happen, for example.) As a result, you need to make sure to prevent creating and activating duplicate constraints -- either using a BOOL to only perform certain constraint setup only once, or by making sure to deactivate/remove existing constraints before creating & activating new ones.
For example:
- (void)updateConstraints { // for view controllers, use -updateViewConstraints
if (!_hasLoadedConstraints) {
_hasLoadedConstraints = YES;
// create your constraints
}
[super updateConstraints];
}
Cheers to #fresidue in the comments for pointing out that Apple's docs recommend calling super as the last step. If you call super before making changes to some constraints, you may hit a runtime exception (crash).
This should be done in ViewDidLoad, as per WWDC video from Apple and the documentation.
No idea why people recommend updateConstraints. If you do in updateConstraints you will hit issues with NSAutoresizingMaskLayoutConstraint with auto resizing because your views have already taken into account the auto masks. You would need to remove them in updateConstraints to make work.
UpdateConstraints should be for just that, when you need to 'update' them, make changes etc from your initial setup.
Do it in view did layout subviews method
override func viewDidLayoutSubviews() {
super.viewDidLayoutSubviews()
}
I have this solution to change constraints before those who are in the storyboard are loaded.
This solution removes any lags after the view is loaded.
-(void)updateViewConstraints{
dispatch_async(dispatch_get_main_queue(), ^{
//Modify here your Constraint -> Activate the new constraint and deactivate the old one
self.yourContraintA.active = true;
self.yourContraintB.active= false;
//ecc..
});
[super updateViewConstraints]; // This must be the last thing that you do here -> if! ->Crash!
}
You can set them in viewWillLayoutSubviews: too:
override func viewWillLayoutSubviews() {
if(!wasViewLoaded){
wasViewLoaded = true
//update constraint
//also maybe add a subview
}
}
This worked for me:
Swift 4.2
override func viewWillAppear(_ animated: Bool) {
super.viewWillAppear(animated)
// Modify your constraints in here
...
}
Although honestly I am not sure if it is worth it. It seems a bit slower to load than in viewDidLoad(). I just wanted to move them out of the latter, because it's getting massive.
Add your constraints in viewWillLayoutSubviews() to add constraints programmatically
See Apple Documentation in Custom Layout Section
If possible, use constraints to define all of your layouts. The
resulting layouts are more robust and easier to debug. You should only
override the viewWillLayoutSubviews or layoutSubviews methods when you
need to create a layout that cannot be expressed with constraints
alone.
Following example is to pass any view to another class. create my view from storyboard
Swift 5.0
override func viewWillAppear(_ animated: Bool) {
super.viewWillAppear(animated)
DispatchQueue.main.async {
self.abcInstance = ABC(frame: self.myView.frame)
}
}
If you miss DispatchQueue.main.async, it will take time to update constraints in viewWillAppear. Create myView in storyboard and give constraints same as screen width & height, then try printing frame of myView. It will give accurate value in DispatchQueue.main.async or in viewDidAppear but not give accurate value in viewWillAppear without DispatchQueue.main.async.
I'm sorry if I missed something here, but I thought UIView objects that were created in IB should have their frames created in viewDidLoad so you can do initial setup based off of this view in viewDidLoad or awakeFromNib or viewWillAppear. I logged the output in each method:
NSLog(#"%# %s", NSStringFromCGRect(self.zoomView.frame), __FUNCTION__);
And in all I get {0, 0, 0, 0}.
This is the first nib in my UIStoryboard, and I'm using Autolayout and iOS 6. I could have sworn on previous apps I have used the frame of other UIView objects created in IB to set things up. Is there something that has changed? Or do I just remember it incorrectly? Thanks!
I had the exact same issue. Yes, you remember correctly - it used to be different in iOS 5. I always set up my views in viewDidLoad: and the frame was already the way it was going to be when the view was actually on screen.
Now in iOS 6, you'll need to put your code into viewDidAppear: to have a valid frame to work with, if auto layout is enabled. Apparently the laying-out is done in between those two calls.
I think it has to do with the device you are using and possibly other things but the frames and bounds "could" sometimes be set by the time viewDidLoad is invoked and sometimes not (depends on ....) On the other hand, frames and bounds are guaranteed to have been set by the time "ViewDidAppear" has been called. And you want to put your code related to frames and bounds where it is guaranteed!