Related
I was entirely amazed by how Coq's parser is implemented. e.g.
https://softwarefoundations.cis.upenn.edu/lf-current/Imp.html#lab347
It's so crazy that the parser seems ok to take any lexeme by giving notation command and subsequent parser is able to parse any expression as it is. So what it means is the grammar must be context sensitive. But this is so flexible that it absolutely goes beyond my comprehension.
Any pointers on how this kind of parser is theoretically feasible? How should it work? Any materials or knowledge would work. I just try to learn about this type of parser in general. Thanks.
Please do not ask me to read Coq's source myself. I want to check the idea in general but not a specific implementation.
Indeed, this notation system is very powerful and it was probably one of the reasons of Coq's success. In practice, this is a source of much complication in the source code. I think that #ejgallego should be able to tell you more about it but here is a quick explanation:
At the beginning, Coq's documents were evaluated sentence by sentence (sentences are separated by dots) by coqtop. Some commands can define notations and these modify the parsing rules when they are evaluated. Thus, later sentences are evaluated with a slightly different parser.
Since version 8.5, there is also a mechanism (the STM) to evaluate a document fully (many sentences in parallel) but there is some special mechanism for handling these notation commands (basically you have to wait for these to be evaluated before you can continue parsing and evaluating the rest of the document).
Thus, contrary to a normal programming language, where the compiler will take a document, pass it through the lexer, then the parser (parse the full document in one go), and then have an AST to give to the typer or other later stages, in Coq each command is parsed and evaluated separately. Thus, there is no need to resort to complex contextual grammars...
I'll drop my two cents to complement #Zimmi48's excellent answer.
Coq indeed features an extensible parser, which TTBOMK is mainly the work of Hugo Herbelin, built on the CAMLP4/CAMLP5 extensible parsing system by Daniel de Rauglaudre. Both are the canonical sources for information about the parser, I'll try to summarize what I know but note indeed that my experience with the system is short.
The CAMLPX system basically supports any LL1 grammar. Coq exposes to the user the whole set of grammar rules, allowing the user to redefine them. This is the base mechanism on which extensible grammars are built. Notations are compiled into parsing rules in the Metasyntax module, and unfolded in a latter post-processing phase. And that really is AFAICT.
The system itself hasn't changed much in the whole 8.x series, #Zimmi48's comments are more related to the internal processing of commands after parsing. I recently learned that Coq v7 had an even more powerful system for modifying the parser.
In words of Hugo Herbelin "the art of extensible parsing is a delicate one" and indeed it is, but Coq's achieved a pretty great implementation of it.
I am trying to create a simple script for a resource API. I have a resource API mainly creates game resources in a structured manner. What I want is dealing with this API without creating c++ programs each time I want a resource. So we (me and my instructor from uni) decided to create a simple script to create/edit resource files without compiling every time. There are also some other irrelevant factors that I need a command line interface rather than a GUI program.
Anyway, here is script sample:
<path>.<command> -<options>
/Graphics[3].add "blabla.png"
I didn't design this script language, the owner of API did. The part before '.' as you can guess is the path and part after '.' is actual command and some options, flags etc. As a first step, I tried to create grammar of left part because I thought I could use it while searching info about lexical analyzers and parser. The problem is I am inexperienced when it comes to parsing and programming languages and I am not sure if it's correct or not. Here is some more examples and grammar of left side.
dir -> '/' | '/' path
path -> object '/' path | object
object -> number | string '[' number ']'
Notation if this grammar can be a mess, I don't know. There is 5 different possibilities, they are:
String
"String"
Number
String[Number]
"String"[Number]
It has to start with '/' symbol and if it's the only symbol, I will accept it as Root.
Now my problem is how can I lexically analyze this script? Is there a special method? What should my lexical analyzer do and do not(I read some lexical analysers also do syntactic analysis up to a point). Do you think grammar, etc. is technically appropriate? What kind of parsing method I should use(Recursive Descent, LL etc.)? I am trying to make it technically appropriate piece of work. It's not commercial so I have time thus I can learn lexical analysis and parsing better. I don't want to use a parser library.
What should my lexical analyzer do and not do?
It should:
recognize tokens
ignore ignorable whitespace and comments (if there are such things)
optionally, keep track of source location in order to produce meaningful error messages.
It should not attempt to parse the input, although that will be very tempting with such a simple language.
From what I can see, you have the following tokens:
punctuation: /, ., linear-white-space, new-line
numbers
unquoted strings (often called "atoms" or "ids")
quoted strings (possibly the same token type as unquoted strings)
I'm not sure what the syntax for -options is, but that might include more possibilities.
Choosing to return linear-white-space (that is, a sequence consisting only of tabs and spaces) as a token is somewhat questionable; it complicates the grammar considerably, particularly since there are probably places where white-space is ignorable, such as the beginning and end of a line. But I have the intuition that you do not want to allow whitespace inside of a path and that you plan to require it between the command name and its arguments. That is, you want to prohibit:
/left /right[3] .whimper "hello, world"
/left/right[3].whimper"hello, world"
But maybe I'm wrong. Maybe you're happy to accept both. That would be simpler, because if you accept both, then you can just ignore linear-whitespace altogether.
By the way, experience has shown that using new-line to separate commands can be awkward; sooner or later you will need to break a command into two lines in order to avoid having to buy an extra monitor to see the entire line. The convention (used by bash and the C preprocessor, amongst others) of putting a \ as the last character on a line to be continued is possible, but can lead to annoying bugs (like having an invisible space following the \ and thus preventing it from really continuing the line).
From here down is 100% personal opinion, offered for free. So take it for what its worth.
I am trying to make it technically appropriate piece of work. It's not commercial so I have time thus I can learn lexical analysis and parsing better. I don't want to use a parser library.
There is a contradiction here, in my opinion. Or perhaps two contradictions.
A technically appropriate piece of work would use standard tools; at least a lexical generator and probably a parser generator. It would do that because, properly used, the lexical and grammatical descriptions provided to the tools document precisely the actual language, and the tools guarantee that the desired language is what is actually recognized. Writing ad hoc code, even simple lexical recognizers and recursive descent parsers, for all that it can be elegant, is less self-documenting, less maintainable, and provides fewer guarantees of correctness. Consequently, best practice is "use standard tools".
Secondly, I disagree with your instructor (if I understand their proposal correctly, based on your comments) that writing ad hoc lexers and parsers aids in understanding lexical and parsing theory. In fact, it may be counterproductive. Bottom-up parsing, which is incredibly elegant both theoretically and practically, is almost impossible to write by hand and totally impossible to read. Consequently, many programmers prefer to use recursive-descent or Pratt parsers, because they understand the code. However, such parsers are not as powerful as a bottom-up parser (particularly GLR or Earley parsers, which are fully general), and their use leads to unnecessary grammatical compromises.
You don't need to write a regular expression library to understand regular expressions. The libraries abstract away the awkward implementation details (and there are lots of them, and they really are awkward) and let you concentrate on the essence of creating and using regular expressions.
In the same way, you do not need to write a compiler in order to understand how to program in C. After you have a good basis in C, you can improve your understanding (maybe) by understanding how it translates into machine code, but unless you plan a career in compiler writing, knowing the details of obscure optimization algorithms are not going to make you a better programmer. Or, at least, they're not first on your agenda.
Similarly, once you really understand regular expressions, you might find writing a library interesting. Or not -- you might find it incredibly frustrating and give up after a couple of months of hard work. Either way, you will appreciate existing libraries more. But learn to use the existing libraries first.
And the same with parser generators. If you want to learn how to translate an idea for a programming language into something precise and implementable, learn how to use a parser generator. Only after you have mastered the theory of parsing should you even think of focusing on low-level implementations.
I encountered a problem while doing my student research project. I'm an electrical engineering student, but my project has somewhat to do with theoretical computer science: I need to parse a lot of pascal sourcecode-files for typedefinitions and constants and visualize all occurrences. The typedefinitions are spread recursively over various files, i.e. there is type a = byte in file x, in file y, there is a record (struct) b, that contains type a and then there is even a type c in file z that is an array of type b.
My idea so far was to learn about compiler construction, since the compiler has to resolve all typedefinitions and break them down to the elemental types.
So, I've read about compiler construction in two books (one of which is even written by the pascal inventor), but I'm lacking so many basics of theoretical computer science that it took me one week alone to work my way halfway through. What I've learned so far is that for achieving my goal, lexer and parser should be sufficient. Since this software is only a really smart part of the whole project, I can't spend so much time with it, so I started experimenting with flex and later with antlr.
My hope was, that parsing for typedefinitions only was such an easy task, that I could manage to do it with only using a scanner and let it do some parser's work: The pascal-files consist of 5 main-parts, each one being optional: A header with comments, a const-section, a type-section, a var-section and (in least cases) a code-section. Each section has a start-identifier but no clear end-identifier. So I started searching for the start of the type- and const-section (TYPE, CONST), discarding everything else. In flex, this is fairly easy, because it allows "start conditions". They can be used as various states like "INITIAL", "TYPE-SECTION", "CONST-SECTION" and "COMMENT" with different rules for each state. I wanted to get back a string from the scanner with following syntax " = ". There was one thing that made this task difficult: Some type contain comments like in this example: AuEingangsBool_t {PCMON} = MAX_AuEingangsFeld;. The scanner can not extract such type-definition with a regular expression.
My next step was to do it properly with scanner AND parser, so I searched for a parsergenerator and found antlr. Since I write the tool in C# anyway, I decided to use its scannergenerator, too, so that I do not have to communicate between different programs. Now I encountered following Problem: AFAIK, antlr does not support "start conditions" as flex do. That means, I have to scan the whole file (okay, comments still get discarded) and get a lot of unneccessary (and wrong) tokens. Because I don't use rules for the whole pascal grammar, the scanner would identify most keywords of the pascal syntax as user-identifiers and the parser would nag about all those series of tokens, that do not fit to type- and constant-defintions
Now, finally my question(s): Can anyone of you tell me, which approach leads anywhere for my project? Is there a possibility to scan only parts of the source-files with antlr? Or do I have to connect flex with antlr for that purpose? Can I tell antlr's parser to ignore every token that is not in the const- or type-section? Are those tools too powerful for my task and should I write own routines instead?
You'd be better off to find a compiler for Pascal, and simply modify to report the information you want. Presumably there is such a compiler for your Pascal, and often the source code for such compilers is available.
Otherwise you essentially need to build a parser. Building lexer, and then hacking around with the resulting lexemes, is essentially building a bad parser by ad hoc methods. ANTLR is a good way to go; you can define the lexemes (including means to pick up and ignore comments) pretty easily, especially for older dialects of Pascal. You'll need good BNF rules for the type information that you want, and translate those rules to the parser generator. What you can do to minimize work, is to cheat on rules for the parts of the language you don't care about. For instance, you could write an accurate subgrammar for assignment statements. Since you don't care about them, you can write a sloppy subgrammar that treats assignment statements as anything that begins with an identifier, is followed by arbitrary other tokens, and ends with semicolon. This kind of a grammar is called an "island grammar"; it is only accurate where it needs to be accurate.
I don't know about the recursive bit. Is there a reason you can't just process each file separately? The answer may depend on what information you want to know about each type declaration, and if you go deep enough, you may need a symbol table as well as an island parser. Parser generators offer you no help for this.
First, there can be type and const blocks within other blocks (procedures, in later Delphi versions also classes).
Moreover, I'm not entirely sure that you can actually simply scan for a const token, and then start parsing. Const is also used for other purposes in most common (Borland) Pascal dialects. Some keywords can be reused in a different context, and if you don't parse the global blockstructure, and only look for const and type in specific places you will erroneously start parsing there.
A base problem of course is the comments. Scanners cut out comments as early as possible, and don't regard them further. You probably have to setup the scanner so that comments are attached to the adjacent tokens as field (associate with token before or save them up till a certain token follows).
As far antlr vs flex, no clue. The only parsergenerator I have some minor experience in parsing Pascal with is Coco/R (a parsergenerator popular by Wirthians), but in general I (and many pascalians) prefer handcoded.
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 6 years ago.
Improve this question
I am a college student getting my Computer Science degree. A lot of my fellow students really haven't done a lot of programming. They've done their class assignments, but let's be honest here those questions don't really teach you how to program.
I have had several other students ask me questions about how to parse things, and I'm never quite sure how to explain it to them. Is it best to start just going line by line looking for substrings, or just give them the more complicated lecture about using proper lexical analysis, etc. to create tokens, use BNF, and all of that other stuff? They never quite understand it when I try to explain it.
What's the best approach to explain this without confusing them or discouraging them from actually trying.
I'd explain parsing as the process of turning some kind of data into another kind of data.
In practice, for me this is almost always turning a string, or binary data, into a data structure inside my Program.
For example, turning
":Nick!User#Host PRIVMSG #channel :Hello!"
into (C)
struct irc_line {
char *nick;
char *user;
char *host;
char *command;
char **arguments;
char *message;
} sample = { "Nick", "User", "Host", "PRIVMSG", { "#channel" }, "Hello!" }
Parsing is the process of analyzing text made of a sequence of tokens to determine its grammatical structure with respect to a given (more or less) formal grammar.
The parser then builds a data structure based on the tokens. This data structure can then be used by a compiler, interpreter or translator to create an executable program or library.
(source: wikimedia.org)
If I gave you an english sentence, and asked you to break down the sentence into its parts of speech (nouns, verbs, etc.), you would be parsing the sentence.
That's the simplest explanation of parsing I can think of.
That said, parsing is a non-trivial computational problem. You have to start with simple examples, and work your way up to the more complex.
What is parsing?
In computer science, parsing is the process of analysing text to determine if it belongs to a specific language or not (i.e. is syntactically valid for that language's grammar). It is an informal name for the syntactic analysis process.
For example, suppose the language a^n b^n (which means same number of characters A followed by the same number of characters B). A parser for that language would accept AABB input and reject the AAAB input. That is what a parser does.
In addition, during this process a data structure could be created for further processing. In my previous example, it could, for instance, to store the AA and BB in two separate stacks.
Anything that happens after it, like giving meaning to AA or BB, or transform it in something else, is not parsing. Giving meaning to parts of an input sequence of tokens is called semantic analysis.
What isn't parsing?
Parsing is not transform one thing into another. Transforming A into B, is, in essence, what a compiler does. Compiling takes several steps, parsing is only one of them.
Parsing is not extracting meaning from a text. That is semantic analysis, a step of the compiling process.
What is the simplest way to understand it?
I think the best way for understanding the parsing concept is to begin with the simpler concepts. The simplest one in language processing subject is the finite automaton. It is a formalism to parsing regular languages, such as regular expressions.
It is very simple, you have an input, a set of states and a set of transitions. Consider the following language built over the alphabet { A, B }, L = { w | w starts with 'AA' or 'BB' as substring }. The automaton below represents a possible parser for that language whose all valid words starts with 'AA' or 'BB'.
A-->(q1)--A-->(qf)
/
(q0)
\
B-->(q2)--B-->(qf)
It is a very simple parser for that language. You start at (q0), the initial state, then you read a symbol from the input, if it is A then you move to (q1) state, otherwise (it is a B, remember the remember the alphabet is only A and B) you move to (q2) state and so on. If you reach (qf) state, then the input was accepted.
As it is visual, you only need a pencil and a piece of paper to explain what a parser is to anyone, including a child. I think the simplicity is what makes the automata the most suitable way to teaching language processing concepts, such as parsing.
Finally, being a Computer Science student, you will study such concepts in-deep at theoretical computer science classes such as Formal Languages and Theory of Computation.
Have them try to write a program that can evaluate arbitrary simple arithmetic expressions. This is a simple problem to understand but as you start getting deeper into it a lot of basic parsing starts to make sense.
Parsing is about READING data in one format, so that you can use it to your needs.
I think you need to teach them to think like this. So, this is the simplest way I can think of to explain parsing for someone new to this concept.
Generally, we try to parse data one line at a time because generally it is easier for humans to think this way, dividing and conquering, and also easier to code.
We call field to every minimum undivisible data. Name is field, Age is another field, and Surname is another field. For example.
In a line, we can have various fields. In order to distinguish them, we can delimit fields by separators or by the maximum length assign to each field.
For example:
By separating fields by comma
Paul,20,Jones
Or by space (Name can have 20 letters max, age up to 3 digits, Jones up to 20 letters)
Paul 020Jones
Any of the before set of fields is called a record.
To separate between a delimited field record we need to delimit record. A dot will be enough (though you know you can apply CR/LF).
A list could be:
Michael,39,Jordan.Shaquille,40,O'neal.Lebron,24,James.
or with CR/LF
Michael,39,Jordan
Shaquille,40,O'neal
Lebron,24,James
You can say them to list 10 nba (or nlf) players they like. Then, they should type them according to a format. Then make a program to parse it and display each record. One group, can make list in a comma-separated format and a program to parse a list in a fixed size format, and viceversa.
Parsing to me is breaking down something into meaningful parts... using a definable or predefined known, common set of part "definitions".
For programming languages there would be keyword parts, usable punctuation sequences...
For pumpkin pie it might be something like the crust, filling and toppings.
For written languages there might be what a word is, a sentence, what a verb is...
For spoken languages it might be tone, volume, mood, implication, emotion, context
Syntax analysis (as well as common sense after all) would tell if what your are parsing is a pumpkinpie or a programming language. Does it have crust? well maybe it's pumpkin pudding or perhaps a spoken language !
One thing to note about parsing stuff is there are usually many ways to break things into parts.
For example you could break up a pumpkin pie by cutting it from the center to the edge or from the bottom to the top or with a scoop to get the filling out or by using a sledge hammer or eating it.
And how you parse things would determine if doing something with those parts will be easy or hard.
In the "computer languages" world, there are common ways to parse text source code. These common methods (algorithims) have titles or names. Search the Internet for common methods/names for ways to parse languages. Wikipedia can help in this regard.
In linguistics, to divide language into small components that can be analyzed. For example, parsing this sentence would involve dividing it into words and phrases and identifying the type of each component (e.g.,verb, adjective, or noun).
Parsing is a very important part of many computer science disciplines. For example, compilers must parse source code to be able to translate it into object code. Likewise, any application that processes complex commands must be able to parse the commands. This includes virtually all end-user applications.
Parsing is often divided into lexical analysis and semantic parsing. Lexical analysis concentrates on dividing strings into components, called tokens, based on punctuationand other keys. Semantic parsing then attempts to determine the meaning of the string.
http://www.webopedia.com/TERM/P/parse.html
Simple explanation: Parsing is breaking a block of data into smaller pieces (tokens) by following a set of rules (using delimiters for example),
so that this data could be processes piece by piece (managed, analysed, interpreted, transmitted, ets).
Examples: Many applications (like Spreadsheet programs) use CSV (Comma Separated Values) file format to import and export data. CSV format makes it possible for the applications to process this data with a help of a special parser.
Web browsers have special parsers for HTML and CSS files. JSON parsers exist. All special file formats must have some parsers designed specifically for them.
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 7 years ago.
Improve this question
I'm building an application that receives source code as input and analyzes several aspects of the code. It can accept code from many common languages, e.g. C/C++, C#, Java, Python, PHP, Pascal, SQL, and more (however many languages are unsupported, e.g. Ada, Cobol, Fortran). Once the language is known, my application knows what to do (I have different handlers for different languages).
Currently I'm asking the user to input the programming language the code is written in, and this is error-prone: although users know the programming languages, a small percentage of them (on rare occasions) click the wrong option just due to recklessness, and that breaks the system (i.e. my analysis fails).
It seems to me like there should be a way to figure out (in most cases) what the language is, from the input text itself. Several notes:
I'm receiving pure text and not file names, so I can't use the extension as a hint.
The user is not required to input complete source codes, and can also input code snippets (i.e. the include/import part may not be included).
it's clear to me that any algorithm I choose will not be 100% proof, certainly for very short input codes (e.g. that could be accepted by both Python and Ruby), in which cases I will still need the user's assistance, however I would like to minimize user involvement in the process to minimize mistakes.
Examples:
If the text contains "x->y()", I may know for sure it's C++ (?)
If the text contains "public static void main", I may know for sure it's Java (?)
If the text contains "for x := y to z do begin", I may know for sure it's Pascal (?)
My question:
Are you familiar with any standard library/method for figuring out automatically what the language of an input source code is?
What are the unique code "tokens" with which I could certainly differentiate one language from another?
I'm writing my code in Python but I believe the question to be language agnostic.
Thanks
Vim has a autodetect filetype feature. If you download vim sourcecode you will find a /vim/runtime/filetype.vim file.
For each language it checks the extension of the file and also, for some of them (most common), it has a function that can get the filetype from the source code. You can check that out. The code is pretty easy to understand and there are some very useful comments there.
build a generic tokenizer and then use a Bayesian filter on them. Use the existing "user checks a box" system to train it.
Here is a simple way to do it. Just run the parser on every language. Whatever language gets the farthest without encountering any errors (or has the fewest errors) wins.
This technique has the following advantages:
You already have most of the code necessary to do this.
The analysis can be done in parallel on multi-core machines.
Most languages can be eliminated very quickly.
This technique is very robust. Languages that might appear very similar when using a fuzzy analysis (baysian for example), would likely have many errors when the actual parser is run.
If a program is parsed correctly in two different languages, then there was never any hope of distinguishing them in the first place.
I think the problem is impossible. The best you can do is to come up with some probability that a program is in a particular language, and even then I would guess producing a solid probability is very hard. Problems that come to mind at once:
use of features like the C pre-processor can effectively mask the underlyuing language altogether
looking for keywords is not sufficient as the keywords can be used in other languages as identifiers
looking for actual language constructs requires you to parse the code, but to do that you need to know the language
what do you do about malformed code?
Those seem enough problems to solve to be going on with.
One program I know which even can distinguish several different languages within the same file is ohcount. You might get some ideas there, although I don't really know how they do it.
In general you can look for distinctive patterns:
Operators might be an indicator, such as := for Pascal/Modula/Oberon, => or the whole of LINQ in C#
Keywords would be another one as probably no two languages have the same set of keywords
Casing rules for identifiers, assuming the piece of code was writting conforming to best practices. Probably a very weak rule
Standard library functions or types. Especially for languages that usually rely heavily on them, such as PHP you might just use a long list of standard library functions.
You may create a set of rules, each of which indicates a possible set of languages if it matches. Intersecting the resulting lists will hopefully get you only one language.
The problem with this approach however, is that you need to do tokenizing and compare tokens (otherwise you can't really know what operators are or whether something you found was inside a comment or string). Tokenizing rules are different for each language as well, though; just splitting everything at whitespace and punctuation will probably not yield a very useful sequence of tokens. You can try several different tokenizing rules (each of which would indicate a certain set of languages as well) and have your rules match to a specified tokenization. For example, trying to find a single-quoted string (for trying out Pascal) in a VB snippet with one comment will probably fail, but another tokenizer might have more luck.
But since you want to perform analysis anyway you probably have parsers for the languages you support, so you can just try running the snippet through each parser and take that as indicator which language it would be (as suggested by OregonGhost as well).
Some thoughts:
$x->y() would be valid in PHP, so ensure that there's no $ symbol if you think C++ (though I think you can store function pointers in a C struct, so this could also be C).
public static void main is Java if it is cased properly - write Main and it's C#. This gets complicated if you take case-insensitive languages like many scripting languages or Pascal into account. The [] attribute syntax in C# on the other hand seems to be rather unique.
You can also try to use the keywords of a language - for example, Option Strict or End Sub are typical for VB and the like, while yield is likely C# and initialization/implementation are Object Pascal / Delphi.
If your application is analyzing the source code anyway, you code try to throw your analysis code at it for every language and if it fails really bad, it was the wrong language :)
My approach would be:
Create a list of strings or regexes (with and without case sensitivity), where each element has assigned a list of languages that the element is an indicator for:
class => C++, C#, Java
interface => C#, Java
implements => Java
[attribute] => C#
procedure => Pascal, Modula
create table / insert / ... => SQL
etc. Then parse the file line-by-line, match each element of the list, and count the hits.
The language with the most hits wins ;)
How about word frequency analysis (with a twist)? Parse the source code and categorise it much like a spam filter does. This way when a code snippet is entered into your app which cannot be 100% identified you can have it show the closest matches which the user can pick from - this can then be fed into your database.
Here's an idea for you. For each of your N languages, find some files in the language, something like 10-20 per language would be enough, each one not too short. Concatenate all files in one language together. Call this lang1.txt. GZip it to lang1.txt.gz. You will have a set of N langX.txt and langX.txt.gz files.
Now, take the file in question and append to each of he langX.txt files, producing langXapp.txt, and corresponding gzipped langXapp.txt.gz. For each X, find the difference between the size of langXapp.gz and langX.gz. The smallest difference will correspond to the language of your file.
Disclaimer: this will work reasonably well only for longer files. Also, it's not very efficient. But on the plus side you don't need to know anything about the language, it's completely automatic. And it can detect natural languages and tell between French or Chinese as well. Just in case you need it :) But the main reason, I just think it's interesting thing to try :)
The most bulletproof but also most work intensive way is to write a parser for each language and just run them in sequence to see which one would accept the code. This won't work well if code has syntax errors though and you most probably would have to deal with code like that, people do make mistakes. One of the fast ways to implement this is to get common compilers for every language you support and just run them and check how many errors they produce.
Heuristics works up to a certain point and the more languages you will support the less help you would get from them. But for first few versions it's a good start, mostly because it's fast to implement and works good enough in most cases. You could check for specific keywords, function/class names in API that is used often, some language constructions etc. Best way is to check how many of these specific stuff a file have for each possible language, this will help with some syntax errors, user defined functions with names like this() in languages that doesn't have such keywords, stuff written in comments and string literals.
Anyhow you most likely would fail sometimes so some mechanism for user to override language choice is still necessary.
I think you never should rely on one single feature, since the absence in a fragment (e.g. somebody systematically using WHILE instead of for) might confuse you.
Also try to stay away from global identifiers like "IMPORT" or "MODULE" or "UNIT" or INITIALIZATION/FINALIZATION, since they might not always exist, be optional in complete sources, and totally absent in fragments.
Dialects and similar languages (e.g. Modula2 and Pascal) are dangerous too.
I would create simple lexers for a bunch of languages that keep track of key tokens, and then simply calculate a key tokens to "other" identifiers ratio. Give each token a weight, since some might be a key indicator to disambiguate between dialects or versions.
Note that this is also a convenient way to allow users to plugin "known" keywords to increase the detection ratio, by e.g. providing identifiers of runtime library routines or types.
Very interesting question, I don't know if it is possible to be able to distinguish languages by code snippets, but here are some ideas:
One simple way is to watch out for single-quotes: In some languages, it is used as character wrapper, whereas in the others it can contain a whole string
A unary asterisk or a unary ampersand operator is a certain indication that it's either of C/C++/C#.
Pascal is the only language (of the ones given) to use two characters for assignments :=. Pascal has many unique keywords, too (begin, sub, end, ...)
The class initialization with a function could be a nice hint for Java.
Functions that do not belong to a class eliminates java (there is no max(), for example)
Naming of basic types (bool vs boolean)
Which reminds me: C++ can look very differently across projects (#define boolean int) So you can never guarantee, that you found the correct language.
If you run the source code through a hashing algorithm and it looks the same, you're most likely analyzing Perl
Indentation is a good hint for Python
You could use functions provided by the languages themselves - like token_get_all() for PHP - or third-party tools - like pychecker for python - to check the syntax
Summing it up: This project would make an interesting research paper (IMHO) and if you want it to work well, be prepared to put a lot of effort into it.
There is no way of making this foolproof, but I would personally start with operators, since they are in most cases "set in stone" (I can't say this holds true to every language since I know only a limited set). This would narrow it down quite considerably, but not nearly enough. For instance "->" is used in many languages (at least C, C++ and Perl).
I would go for something like this:
Create a list of features for each language, these could be operators, commenting style (since most use some sort of easily detectable character or character combination).
For instance:
Some languages have lines that start with the character "#", these include C, C++ and Perl. Do others than the first two use #include and #define in their vocabulary? If you detect this character at the beginning of line, the language is probably one of those. If the character is in the middle of the line, the language is most likely Perl.
Also, if you find the pattern := this would narrow it down to some likely languages.
Etc.
I would have a two-dimensional table with languages and patterns found and after analysis I would simply count which language had most "hits". If I wanted it to be really clever I would give each feature a weight which would signify how likely or unlikely it is that this feature is included in a snippet of this language. For instance if you can find a snippet that starts with /* and ends with */ it is more than likely that this is either C or C++.
The problem with keywords is someone might use it as a normal variable or even inside comments. They can be used as a decider (e.g. the word "class" is much more likely in C++ than C if everything else is equal), but you can't rely on them.
After the analysis I would offer the most likely language as the choice for the user with the rest ordered which would also be selectable. So the user would accept your guess by simply clicking a button, or he can switch it easily.
In answer to 2: if there's a "#!" and the name of an interpreter at the very beginning, then you definitely know which language it is. (Can't believe this wasn't mentioned by anyone else.)