Related
Before upgrading Xcode to 7.2, I was using Xcode 7.1.1 to build and distribute apps. I have upgraded to Xcode 7.2 and none of my provisioning profiles (matched to that particular app's bundle ID) match my installed certificates that were working in Xcode 7.1.1.
I only get:
Your build settings specify a provisioning profile with the UUID “some_number”, however, no such provisioning profile was found.
I have tried regenerating a .certSigningRequest to generate a new Certificate and Profile and made sure the Team in the General tab of the target is correct. Whenever I select a Provision Profile, all of my Code Signing Identities appear in the Identities in Keychain, but none of them will pair correctly.
It seems setting the Provision Profile to Automatic and the Code Signing Identity to iOS Developer will resolve this error, but the advantage of managing my Provisioning Profiles is gone as I believe Xcode then manages these.
Any thoughts on why setting my Provisioning Profiles and Code Signing Identities to anything but Automatic and iOS Developer produces this error?
I also had some problems after updating Xcode.
I fixed it by opening Xcode Preferences (⌘+,), going to Accounts → View Details. Then select all provisioning profiles and delete them with backspace (note: they can't be removed in Xcode 7.2). Restart Xcode, else the list doesn't seem to update properly.
Now click the Download all button, and you should have all provisioning profiles that you defined in the Member center back in Xcode. Don't worry about the Xcode-generated ones (Prefixed with XC:), Xcode will regenerate them if necessary. Restart Xcode again.
Now go to the Code Signing section in your Build Settings and select the correct profile and cert.
Why this happens at all? No idea... I gave up on understanding Apple's policies regarding app signing.
Try restarting XCode first, before trying these other answers. I was about to follow the advice given in other answers, then noticed multiple people saying that restarting XCode was necessary after all the steps. All I did was restart XCode and it fixed the problem. Who knows if it'll fix the problem for you, but it's worth a shot before trying the other solutions. I'm on XCode 7.2.1.
Keep quitting Xcode until the damn thing works.
I've also the same problem, in Xcode 7.2
It solved by followings steps:-
1) Open Xcode preference,
2) Select the appropriate team,
3) Click the "View Details..".
4) In section "Signing Identities": click on "Reset" for each of them.
5) In section "Provisioning Profiles". Click on "Download All".
6) Click on "Done."
7) Go in Xcode, build settings, select it. In General tab, the issues should get removed.
8) Restart the Xcode.
9) Do the Final build.
That's all.
Download https://developer.apple.com/certificationauthority/AppleWWDRCA.cer and add it to Keychain access > certificates (which expires on 2023)
Also after I did all of suggested steps (btw, for some reasons backspace not remove provision profile) error keeping occurring. Until I finally figured out to Restart Xcode.
Probably, it should be first step when you're dealing with Xcode :)
Using Xcode 7.3, I spent way too much time trying to figure this out -- none of the answers here or elsewhere did the trick -- and ultimately stumbled into a ridiculously easy solution.
In the Xcode preferences team settings, delete all provisioning profiles as mentioned in several other answers. I do this with right click, "Show in Finder," Command+A, delete -- it seems these details have changed over different Xcode versions.
Do not re-download any profiles. Instead, exit your preferences and rebuild your project (I built it for my connected iPhone). A little while into the build sequence there will be an alert informing you no provisioning profiles were found, and it will ask if you want this to be fixed automatically. Choose to fix it automatically.
After Xcode does some stuff, you will magically have a new provisioning profile providing what your app needs. I have since uploaded my app for TestFlight and it works great.
Hope this helps someone.
Check your Keychain - look in Login and System keychains for expired certificates or error messages.
I found certs with "this certificate has an invalid user" error messages, and an expired Apple Worldwide Developer Relations Certificate.
Delete them and install the new AWDRC certificate from https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Then follow the accepted answer to get Xcode to use the new certificates.
For me I tried following 2 steps which sadly did not work :
deleting all provisional profile from Xcode Preferences Accounts → View Details , downloading freshly all provisional profiles.
Restarting Xcode everytime.
Instead, I tried to solve keychain certificate related another issue given here
This certificate has an invalid issuer Apple Push Services
This certificate has an invalid issuer
In keychain access, go to View -> Show Expired Certificates.
Look for expired certificates in Login and System keychains and an "Apple Worldwide Developer Relations Certification Authority".
Delete all expired certificates.
After deleting expired certificates, visit the following URL and download the new AppleWWDRCA certificate, https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Double click on the newly downloaded certificate, and install it in your keychain. Can see certificate valid message.
Now go to xcode app. target → Build Setting → Provisioning Profile . Select value from 'automatic' to appropriate Provisioning profile . Bingo!!! profile mismatch issue is solved.
In my case, the problem was that the Archive was being built with a different TEAM-ID than the one who generated the Provisioning Profile (Me). Therefore I Got the error:
"No matching provisioning profile found: Your build settings specify a provisioning profile with the UUID, however, no such provisioning profile was found."
To Solve this:
Clean and Re-Download your Provisioning profiles from Settings
Re-Start Xcode
in the GENERAL Tab of the Project properties, got to TEAM:
Change the current team to the Same team but the one under the ACCOUNT you generated the provisioning profile with.
Clean & Build
Viola!
Hope this helps someone.
I updated to Xcode v7.3.1 and it solved the issue.
With Xcode 7.2.1, if you are certain that your provisioning profile is correct (it has the correct App ID and certificate, and the corresponding certificate exists in your Keychain Access) then set the Code Signing Identity and set the Provisioning Profile to Automatic.
What I did was: created a new provisioning profile and used it. When setup the provisioning profile in the build setting tab, there were the wrong provisioning profile numbers (like "983ff..." as the error message mentioned, that's it!). Corrected to the new provisioning profile, then Xcode 7.2 refreshed itself, and build successfully.
Solutions described here work, but I want to add that you need to have correct target selected on the top left corner of Build Settings in Xcode. Lost some time figuring this out...
You can easily fix the problem by changing bundle identifier on the Apple web page from com.my.app to com.my.app.iOS. I found this solution at https://forums.developer.apple.com/thread/15712.
In Xcode 7.3 I got the same error, my certificate and provisional profile both were fine still I was getting the same error, I was unable to delete the provisional profile in Xcode preferences, so I tried by right-clicking on the provisional profile which shows the option to move to trash, but when I clicked nothing happened then I closed the preference window and open it again by Command, the provisional profile was gone and download option was visible, I clicked download and it starting working fine
When distribute to App Store, you choose Product -> Achieve and encounter "code sign error, no matching provisioning profiles found", if account and downloaded .mobileprovision file is ok. Try click the "Build and Run" button to run it on your phone.
And, a dialog box will popup with a button "Fix", just click "Fix" to do next... Last, your device will have an valid provisioning file. Just do "Product -> Achieve" again, everything is OK!
You can also simply go to xcode preferences then accounts and then it may ask you to simply re sign in with your developer profile and then the issues should go away.
Hope this Helps!
For me changing the build configuration from release to Debug solved the issue.
You can find Build Configuration in Edit Scheme -> Run -> Info -> Build Configuration
Clean your project and re run.
In addition to what other users posted, make sure the Team selected on the Target settings (General tab) is the correct one. Xcode will complain it cannot find the Provisioning Profile if the profile belongs to a different team than the one selected.
For me nothing above worked with XCode 7.3.1 because I had nothing in provisioning profiles (expired). I had to connect my iPhone to Mac and then click on Fix provisioning profile which created another profile expires in a week.
For everyone who didn't solve it yet, my Issue was answered by this:
https://stackoverflow.com/a/41202884/3953197
After I have a few hours searching and trying I have two solutions
1- run the app using IOS real device.
2- turn off the automatically manage signing, go to https://developer.apple.com/account/resources/profiles/, and create a profile now on the Provisioning Profile import it and done.
For me none of the solution worked, but If i disconnect the phone from laptop and then run the build, it succeeds and then I connect and run on the phone. I still couldn't figure out the final fix.
I get the above error when I try to export an enterprise build. I do not have Wildcard App Id. However it Xcode creates one while I prepare the archive.
I am using Xcode 7.2.
I re-created all the certificates and profiles to handle it, but that did not work. Any ideas what is causing this issue and how I can get over it?
It seems like it is bug in Xcode 7.2 , after trying multiple times and troubleshooting , below solution worked for me.
1) Open Xcode preference
2) Select the team
3) Click the "View Details.."
4) In section "Provisioning Profiles": Right Click on any profile and Show in Finder and Delete All Provisioning Profiles in that folder.
5) In section "Provisioning Profiles". Click on "Download All".
6) Restart the Xcode.
7) Select Team in General, and Provisioning Profiles in Build Settings and archive build again.
For more detail find Screenshots below:
1) Open Xcode preference,
2) Select the team,
3) Click the "View Details..".
4) In section "Provisioning Profiles": Right Click on any profile and Show in Finder and Delete All Provisioning Profiles in that folder.
Delete Provisioning Profiles
5) In section "Provisioning Profiles". Click on "Download All".
6) Restart the Xcode. (most of the times Restarting Xcode is only solution after downloading new provisioning profiles or after changing App identifiers)
7) Select Team in General, and Provisioning Profiles in Build Settings and archive build again.
Hope it solves your problem. :)
P.S: I've also opened a bug to Apple via Apple Bug Reporter.
Before upgrading Xcode to 7.2, I was using Xcode 7.1.1 to build and distribute apps. I have upgraded to Xcode 7.2 and none of my provisioning profiles (matched to that particular app's bundle ID) match my installed certificates that were working in Xcode 7.1.1.
I only get:
Your build settings specify a provisioning profile with the UUID “some_number”, however, no such provisioning profile was found.
I have tried regenerating a .certSigningRequest to generate a new Certificate and Profile and made sure the Team in the General tab of the target is correct. Whenever I select a Provision Profile, all of my Code Signing Identities appear in the Identities in Keychain, but none of them will pair correctly.
It seems setting the Provision Profile to Automatic and the Code Signing Identity to iOS Developer will resolve this error, but the advantage of managing my Provisioning Profiles is gone as I believe Xcode then manages these.
Any thoughts on why setting my Provisioning Profiles and Code Signing Identities to anything but Automatic and iOS Developer produces this error?
I also had some problems after updating Xcode.
I fixed it by opening Xcode Preferences (⌘+,), going to Accounts → View Details. Then select all provisioning profiles and delete them with backspace (note: they can't be removed in Xcode 7.2). Restart Xcode, else the list doesn't seem to update properly.
Now click the Download all button, and you should have all provisioning profiles that you defined in the Member center back in Xcode. Don't worry about the Xcode-generated ones (Prefixed with XC:), Xcode will regenerate them if necessary. Restart Xcode again.
Now go to the Code Signing section in your Build Settings and select the correct profile and cert.
Why this happens at all? No idea... I gave up on understanding Apple's policies regarding app signing.
Try restarting XCode first, before trying these other answers. I was about to follow the advice given in other answers, then noticed multiple people saying that restarting XCode was necessary after all the steps. All I did was restart XCode and it fixed the problem. Who knows if it'll fix the problem for you, but it's worth a shot before trying the other solutions. I'm on XCode 7.2.1.
Keep quitting Xcode until the damn thing works.
I've also the same problem, in Xcode 7.2
It solved by followings steps:-
1) Open Xcode preference,
2) Select the appropriate team,
3) Click the "View Details..".
4) In section "Signing Identities": click on "Reset" for each of them.
5) In section "Provisioning Profiles". Click on "Download All".
6) Click on "Done."
7) Go in Xcode, build settings, select it. In General tab, the issues should get removed.
8) Restart the Xcode.
9) Do the Final build.
That's all.
Download https://developer.apple.com/certificationauthority/AppleWWDRCA.cer and add it to Keychain access > certificates (which expires on 2023)
Also after I did all of suggested steps (btw, for some reasons backspace not remove provision profile) error keeping occurring. Until I finally figured out to Restart Xcode.
Probably, it should be first step when you're dealing with Xcode :)
Using Xcode 7.3, I spent way too much time trying to figure this out -- none of the answers here or elsewhere did the trick -- and ultimately stumbled into a ridiculously easy solution.
In the Xcode preferences team settings, delete all provisioning profiles as mentioned in several other answers. I do this with right click, "Show in Finder," Command+A, delete -- it seems these details have changed over different Xcode versions.
Do not re-download any profiles. Instead, exit your preferences and rebuild your project (I built it for my connected iPhone). A little while into the build sequence there will be an alert informing you no provisioning profiles were found, and it will ask if you want this to be fixed automatically. Choose to fix it automatically.
After Xcode does some stuff, you will magically have a new provisioning profile providing what your app needs. I have since uploaded my app for TestFlight and it works great.
Hope this helps someone.
Check your Keychain - look in Login and System keychains for expired certificates or error messages.
I found certs with "this certificate has an invalid user" error messages, and an expired Apple Worldwide Developer Relations Certificate.
Delete them and install the new AWDRC certificate from https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Then follow the accepted answer to get Xcode to use the new certificates.
For me I tried following 2 steps which sadly did not work :
deleting all provisional profile from Xcode Preferences Accounts → View Details , downloading freshly all provisional profiles.
Restarting Xcode everytime.
Instead, I tried to solve keychain certificate related another issue given here
This certificate has an invalid issuer Apple Push Services
This certificate has an invalid issuer
In keychain access, go to View -> Show Expired Certificates.
Look for expired certificates in Login and System keychains and an "Apple Worldwide Developer Relations Certification Authority".
Delete all expired certificates.
After deleting expired certificates, visit the following URL and download the new AppleWWDRCA certificate, https://developer.apple.com/certificationauthority/AppleWWDRCA.cer
Double click on the newly downloaded certificate, and install it in your keychain. Can see certificate valid message.
Now go to xcode app. target → Build Setting → Provisioning Profile . Select value from 'automatic' to appropriate Provisioning profile . Bingo!!! profile mismatch issue is solved.
In my case, the problem was that the Archive was being built with a different TEAM-ID than the one who generated the Provisioning Profile (Me). Therefore I Got the error:
"No matching provisioning profile found: Your build settings specify a provisioning profile with the UUID, however, no such provisioning profile was found."
To Solve this:
Clean and Re-Download your Provisioning profiles from Settings
Re-Start Xcode
in the GENERAL Tab of the Project properties, got to TEAM:
Change the current team to the Same team but the one under the ACCOUNT you generated the provisioning profile with.
Clean & Build
Viola!
Hope this helps someone.
I updated to Xcode v7.3.1 and it solved the issue.
With Xcode 7.2.1, if you are certain that your provisioning profile is correct (it has the correct App ID and certificate, and the corresponding certificate exists in your Keychain Access) then set the Code Signing Identity and set the Provisioning Profile to Automatic.
What I did was: created a new provisioning profile and used it. When setup the provisioning profile in the build setting tab, there were the wrong provisioning profile numbers (like "983ff..." as the error message mentioned, that's it!). Corrected to the new provisioning profile, then Xcode 7.2 refreshed itself, and build successfully.
Solutions described here work, but I want to add that you need to have correct target selected on the top left corner of Build Settings in Xcode. Lost some time figuring this out...
You can easily fix the problem by changing bundle identifier on the Apple web page from com.my.app to com.my.app.iOS. I found this solution at https://forums.developer.apple.com/thread/15712.
In Xcode 7.3 I got the same error, my certificate and provisional profile both were fine still I was getting the same error, I was unable to delete the provisional profile in Xcode preferences, so I tried by right-clicking on the provisional profile which shows the option to move to trash, but when I clicked nothing happened then I closed the preference window and open it again by Command, the provisional profile was gone and download option was visible, I clicked download and it starting working fine
When distribute to App Store, you choose Product -> Achieve and encounter "code sign error, no matching provisioning profiles found", if account and downloaded .mobileprovision file is ok. Try click the "Build and Run" button to run it on your phone.
And, a dialog box will popup with a button "Fix", just click "Fix" to do next... Last, your device will have an valid provisioning file. Just do "Product -> Achieve" again, everything is OK!
You can also simply go to xcode preferences then accounts and then it may ask you to simply re sign in with your developer profile and then the issues should go away.
Hope this Helps!
For me changing the build configuration from release to Debug solved the issue.
You can find Build Configuration in Edit Scheme -> Run -> Info -> Build Configuration
Clean your project and re run.
In addition to what other users posted, make sure the Team selected on the Target settings (General tab) is the correct one. Xcode will complain it cannot find the Provisioning Profile if the profile belongs to a different team than the one selected.
For me nothing above worked with XCode 7.3.1 because I had nothing in provisioning profiles (expired). I had to connect my iPhone to Mac and then click on Fix provisioning profile which created another profile expires in a week.
For everyone who didn't solve it yet, my Issue was answered by this:
https://stackoverflow.com/a/41202884/3953197
After I have a few hours searching and trying I have two solutions
1- run the app using IOS real device.
2- turn off the automatically manage signing, go to https://developer.apple.com/account/resources/profiles/, and create a profile now on the Provisioning Profile import it and done.
For me none of the solution worked, but If i disconnect the phone from laptop and then run the build, it succeeds and then I connect and run on the phone. I still couldn't figure out the final fix.
I've changed the App ID and created a new provisioning profile for it. The new bundle ID and provisioning profile seem to be correctly set in the target's settings, and I get no warning when archiving it. But when I want to export the archive, Xcode shows me a dialog saying:
No matching provisioning profiles found for "Applications/MyApp.app"
And below it says that:
None of the valid provisioning profiles allowed the specified entitlements: application-identifier, beta-reports-active, keychain-access-groups
What I'm missing to check/change?
Thanks
EDIT: In the warning dialog I'm also shown the buttons "Visit Member Center" and "Import Developer Profile". Do I need to set a developer profile if I just want to export a distribution binary?
Go to Member Center and then "Certificates, identifier and profiles" then create a new developer profile. Download and double click on profile then clean you app. and run.
if not solve. see this video https://www.youtube.com/watch?v=wAdV16nRLp8
What resolved the issue was manually setting Provisioning Profile for Debug and Release to the appropriate values, as opposed to choosing Automatic (i.e., set values to your development and distribution provisioning profiles). Based on this SO answer.
This worked for me in Xcode 7.2:
Select your target, then the "General" tab. In the "Identity" section there was a warning that no provisioning profiles were found, and a button that said "Fix issue." I pressed it, and it fixed the issue.
In my case I was missing the automatically generated provisioning profiles because I had changed the bundle ID in an existing project.
I solved this by creating a provisioning profile with an explicit app Bundle ID rather than a Wildcard one.
For Xcode 8 ( As I tried it on 8 and it worked)
First of all clean the project
Xcode-->Product-->Clean
Select simulator as Generic IOS Device
Then again click on product --> Archive
After the archive is made xcode automatically takes you to orgaiser or else you can click on windows--> organiser.
here you can see all the archive you have made in past.
Now, the main part:
Select an archive you want to export.
Click on export. Its on right side under the "upload to store Button"
When You click it ask to select 1 out of 4 options, select--> Save for Development Deployment (4th option)
After This it fetch the account, Make sure you select the account by which you have made provisional profile or signing certificate.
Thats it, it will start preparing your IPA.
It ask to export your IPA to the preferred location & makes a folder their.
In my case it helped.
No other 3 option gave me same error about provisioning profile but not the 4th one.
If it is not userful by regenerating your Provisioning profile ,you can try to go to TARGETS/Build Settings/Packing/Product Bundle identifier,Maybe you forget change the bundle identifier.
I have seen a few other questions that addressed this topic but none like mine. Yesterday I innocently added a device to the list of devices.
Question:
I am under the impression that once you add a device, it will now be linked to the provisioning profile. However, I believe it was not linked to one of my distribution profiles. So I went into edit the profile, clicked the checkmark next to the device, and hit submit. This is where the problems began.
I notice two things: I recently renewed my certificate/provisioning profiles about a week ago. Now, it thinks I renewed my provisioning profile yesterday ( or at least it says so in the organiser ).
Also, when I try to build any project I get the awful "No unexpired provisioning profiles found that contain any of the keychain's signing certificates". In the build settings my signing identity shows up under Identities without provisioning profiles. I have read horror stories of people having to tear everything down and rebuild and I hope I don't have to do that here..
Related question:
Code Sign error: No unexpired provisioning profiles found that contain any of the keychain's signing certificates
iOS distribution is such a pain in the ass! This worked for me (follow the steps in this order):
1) in the xcode organizer:
delete all provisioning profiles
2) in the mac os x keychain:
delete all iOS dev certificates
3) go to developer.apple.com
log in to the member center
revoke all certificates (edit: some redditors pointed out that this isn't a good idea if you're working in a bigger team. If that's the case try just deleting expired ones.)
4) go back to the xcode organizer:
click refresh (bottom right) under the provisioning profiles tab and
login
List item
on the popups click the positive button
5) in your xcode project go to the "build settings" tab
under code signing pick the dev. and distr. identities
if they are not there or not valid go to developer.apple.com and navigate to "provisioning" if they are invalid just click modify and save them again
6) go back to the xcode organizer:
hit refresh again (bottom right)
Today I've installed Xcode 4.3.2, and immediately had the same problem! First trying to archive distribution, and after that In a clean new project, trying to run on a device.
I fixed both problems.
1. For successful distribution I've downloaded and installed my distribution certificate from iOS provisioning portal, after that in Xcode I've setup Code Signing Identity correctly. This solved my problem with archiving.
2. I had the same problem creating new project and trying to run on device. Again in provisioning portal in certificates I've deleted my development cert. Also I deleted all development provision profiles. Also deleted them from organiser. Then I added the device again.
Hope this helps!
For me just hit the "Refresh Button" at the bottom right was the answer !
Hope I can help someone.
I got this error when I the bundle identifier for my app did not match the provisioning profile I was trying to use with it.
I came across this today. It turns out that after I cleaned up my devices list (removed a few I'm no longer doing development for) it made some of my development certificates invalid. I deleted those from the provisioning profiles and regenerated them.
I have Xcode 5.1 and i fixed the issue like this
Xcode -> Preferences -> Accounts -> View details -> Refresh button (Bottom Left)
After it was refreshed i clicked done, and the error was gone :)